User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ? Make - Leblond Model - 19" |
---|
FOR SALE: Ad # 14014 , Year = ? , Make = Leblond , Model = 19" |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 20" x 8ft
|
Ad #
14014 |
Year:
| ?
|
Make:
| Leblond
|
Model:
| 19"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 5000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Leblond 19" regal lathe
20" swing over bed , 12" over cross slide 12" 3 jaw chuck 8ft centers 2" spindle bore inch threading only taper attachment steady rest :6" cap Spindle RPM: 40-160 7.5 HP motor-motor rewound to 220/3 voltage no gap in bed
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 80's? Make - Pearson Model - 10ft x 1/4" |
---|
FOR SALE: Ad # 14010 , Year = 80's? , Make = Pearson , Model = 10ft x 1/4" |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10ft x 1/4"
|
Ad #
14010 |
Year:
| 80's?
|
Make:
| Pearson
|
Model:
| 10ft x 1/4"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 15,000
|
Dimension: L x W x H | 12ft x 7ft x 6ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Pearson 10ft x 1/4" hyd. shear
5ft squaring arm front sheet supports 32" mechanical power back gage-display counter doesnt work-needs minor repair to counter mechanism or single axis dro can be installed for an additional $750.00 mtl thickness(blade gap)adjustment from 1/16 to 1/4" on side of machine rigging/loading fee $700.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 90 Make - BANTAM Model - B412 |
---|
FOR SALE: Ad # 8590 , Year = 90 , Make = BANTAM , Model = B412 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 4FT. 12 TON
|
Ad #
8590 |
Year:
| 90
|
Make:
| BANTAM
|
Model:
| B412
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 4 ft x 12 ton
IR 1 AND 3/4 STROKE
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - MAPLE Model - H360P |
---|
FOR SALE: Ad # 8586 , Year = , Make = MAPLE , Model = H360P |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 3ROLLS 21/2X36 ROLLS
|
Ad #
8586 |
Year:
|
|
Make:
| MAPLE
|
Model:
| H360P
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - Make - PEXTO Model - 298 |
---|
FOR SALE: Ad # 8589 , Year = , Make = PEXTO , Model = 298 |
|
Category: Ironworkers: Notching and Nibblers
|
Capacity:
|
Ad #
8589 |
Year:
|
|
Make:
| PEXTO
|
Model:
| 298
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- CIRCLE CUTTER SHEAR WITH TABLE
20Ga motorized 110V
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - GARY Model - 3350 |
---|
FOR SALE: Ad # 8588 , Year = , Make = GARY , Model = 3350 |
|
Category: Misc. Sheetmetal Equip.
|
Capacity: CUTS 1 0N 15 GAGE 2 ON18 GAGE
|
Ad #
8588 |
Year:
|
|
Make:
| GARY
|
Model:
| 3350
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- GANGSLITTER STAINLESS BLADES
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - EAGLE Model - 5-18DB |
---|
FOR SALE: Ad # 8587 , Year = , Make = EAGLE , Model = 5-18DB |
|
Category: Joining: Riveters, Crimping, Beading and Flanging
|
Capacity: 5FT. LONG x 18ga: slitter shear
|
Ad #
8587 |
Year:
|
|
Make:
| EAGLE
|
Model:
| 5-18DB
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- slitter shear-STAINLESS BLADES CUT 18 GAGE max
5ft width..
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1990 Make - Iowa precision Model - Eslrrcc6016 |
---|
FOR SALE: Ad # 8576 , Year = 1990 , Make = Iowa precision , Model = Eslrrcc6016 |
|
Category: Cut Off Line: Plat, Sheet, Tube and End Forming
|
Capacity: 5ft. wide(60") coils x 16ga
|
Ad #
8576 |
Year:
| 1990
|
Make:
| Iowa precision
|
Model:
| Eslrrcc6016
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Rigging Fee Extra
|
Weight: | ?
|
Dimension: L x W x H | 9ft x 70ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 1990 Iowa Precision- 60" x 16ga Econo Shear -shear /slitting /beading line
Output rate: 23,900 lbs/hr, 60" wide, 16 gauge .063" steel, 12,960 10" x 10" blanks per hour Accuracy: +/- .030" Process range: .015" - .063" mild steel, 67,000 PSI tensile, 50,000 PSI yield Line holds 5 coils Strokes per minute: 36 maximum at shortest length of 10" Maximum Coil Width: 61" Minimum Coil Width: 6" Feed Table: hardened steel feed guides Slitting Arbors: 5" diameter handwheel adjustment Slitting Capacity: 5 max in 16 gauge, .063" Slitting Blades: 9" diameter, high carbon, high chrome, 3 pr std Shear Blades: high carbon, high chrome, 4 cutting edges Roll Drive: 5HP Hydraulic Drive: 7.5HP Straightener: 4 roll,3.375" diameter, handwheel adjustment Floor Space: 56 sq ft Control: Electronic, English or Metric measurement Beading: to HVAC specifications, handwheel adjustment 3-5FT. WIDE /6 STATION-cut to length & width put a bead on mtl-/6 COIL CRADLE Racks for different gage mtl /10,000 LB cap. purchased in 1990 with CD-1321 on lay out L-1635 5ft x 16ga used for 24,26,28,30ga galv. sheet metal COIL HELPER/W / RECOILER AND CONTROLS. (CUT TO LENGHT LINE..SLIT ,BEND,LEVEL CUTOFF 6 STATION. overall assembled size: approx:9'ft x wide x 70ft Note:rigging loading fee: estimate 2 truck loads needed $2200.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 196? Make - INGELS ELBOW MACHINE Model - 100 H MANUAL |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 8577 , Year = 196? , Make = INGELS ELBOW MACHINE , Model = 100 H MANUAL |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity:
|
Ad #
8577 |
Year:
| 196?
|
Make:
| INGELS ELBOW MACHINE
|
Model:
| 100 H MANUAL
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- GREAT CONDITION.. LOTS OF TOOLING
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Lockformer Model - 24S |
---|
FOR SALE: Ad # 9388 , Year = , Make = Lockformer , Model = 24S |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity: 24 in throat
|
Ad #
9388 |
Year:
|
|
Make:
| Lockformer
|
Model:
| 24S
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Specifically designed for the sheet metal shop,
this simple, rugged, cast-iron body design will handle virtually any cutting job. Three blade speeds (100, 600 and 3000 fpm) cut just about any material smoothly, accurately and quickly, even on complicated patterns, whether run through singly or stacked an inch high. There’s no lead-off; the blade won’t twist — even small radius cuts — and work is easy to back out. Other enhanced features include a full 24" throat and three 14" wheels instead of the typical 24" or 26" two- wheel layout. As a result, you can cut a 4-foot-wide piece of material right down the center. ------------------------------------------------- ------------------------------- Features -Full 24" throat -Three 14" wheels -Three blade speeds
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1997 Make - Metal Muncher Model - MM-70: Fabri Center |
---|
FOR SALE: Ad # 14011 , Year = 1997 , Make = Metal Muncher , Model = MM-70: Fabri Center |
|
Category: Ironworkers
|
Capacity: 70 Ton Fabrication center
|
Ad #
14011 |
Year:
| 1997
|
Make:
| Metal Muncher
|
Model:
| MM-70: Fabri Center
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 5 x 7 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Metal Muncher 70 ton hyd. Fabrication center Ironworker
press brake tooling included-shown Punch capacity: 1" thru 7/8" steel flat bar shear 24" max: 1/4" x 24",3/8" x 20", 3/4" x 12", 1" x 7" Square punch (optional): 1-1/4" Round Punch(optional): 1-3/8" Angle Iron shear:4" x 4" x 3/8" Coper Notcher: 3" x 3" x 3/8" used liked a press brake & ironworker combined press brake tooling
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1993 Make - Starret Model - 18" x 24" Grade A |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 760 , Year = 1993 , Make = Starret , Model = 18" x 24" Grade A |
|
Category: Surface Plates
|
Capacity: Surface Plate
|
Ad #
760 |
Year:
| 1993
|
Make:
| Starret
|
Model:
| 18" x 24" Grade A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
|
|
FOR SALE: Year - late 90s Make - Taft-Pearce Model - TP-853872A / 9143-12 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 750 , Year = late 90s , Make = Taft-Pearce , Model = TP-853872A / 9143-12 |
|
Category: Miscellaneous Inspection Equipment
|
Capacity: Cylindrical Square 5" x 12" Steel
|
Ad #
750 |
Year:
| late 90s
|
Make:
| Taft-Pearce
|
Model:
| TP-853872A / 9143-12
|
Condition:
| Like New
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Will crate and load
|
Weight: | 65lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
|
Price:
| $sold USD
|
|
General Description |
- .00004/Ft; Std: .0001/12" squareness
5" dia. x 12 " Length roundness 0.0001
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1995 Make - ARO Model - 7750-EAA-010-205 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 761 , Year = 1995 , Make = ARO , Model = 7750-EAA-010-205 |
|
Category: Cranes/Hoists & Manipulators
|
Capacity: Air operated; 10 Ft. chain: 1/2 Ton
|
Ad #
761 |
Year:
| 1995
|
Make:
| ARO
|
Model:
| 7750-EAA-010-205
|
Condition:
| Like New
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Nc
|
Country:
|
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 90's Make - Waterloo Model - |
---|
FOR SALE: Ad # 751 , Year = 90's , Make = Waterloo , Model = |
|
Category: Bead & Shot Blasters
|
Capacity: Small beadblast unit
|
Ad #
751 |
Year:
| 90's
|
Make:
| Waterloo
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Will disconnect and load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
|
Price:
| $Sold USD
|
|
General Description |
- 2"L x 3"w x 2.5' H; light; needs new nozzle, dust bag; works fine!
|
Electrical Description |
|
Comments: |
- nice machine , little use!
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|