User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 2009 Make - Atrump Model - KL-2160 |
---|
FOR SALE: Ad # 10953 , Year = 2009 , Make = Atrump , Model = KL-2160 |
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: Atrump: Combination Teach Lathe-21"swing x 60" -like new
|
Ad #
10953 |
Year:
| 2009
|
Make:
| Atrump
|
Model:
| KL-2160
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6200
|
Dimension: L x W x H | 126x74x77" |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Atrump KL 2160 CNC Teach Lathe -Like New
10 HP Spindle Motor D1-8(3-3/8) spindle w/ 16" 3 jaw chuck Max 2,200 rpm spindle speed Auto shift 3 gear range Hardened & Ground Turcite-B coating guide way Machine Made in Taiwan •Centroid T400S control with 15” LCD •10 HP Spindle Motor, D1-8, 3-3/8 through hole spindle •Max 2,200 rpm spindle speed with Auto shift 3 gear range •Hardened & Ground with turcite-B coating guide way •C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting •FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability •100% Laser tested for positioning accuracy & repeatability •MASSIVE ONE PIECE CASTING CONSTRUCTION FOR MAXIMUM CUTTING PERFORMANCE •14” Wide bed ways design to provide maximum rigidity & stability •Tool box & Tools •Coolant System •Central lubrication system •Built-in Quartz work light SPECIFICATION:please verify-std specs below
Model KL2160NC Basic dimension Height of Center 267 mm 10.53 inch Swing over Bed 535 mm 21 inch Swing over Cross Slide 310 mm 12 inch Distance Between Centers 1,500 mm 60 in. Bed Width of Bedways 350 mm 13.78 inch Spindle Spindle nose mounting :STD: D1-8 Spindle bore STD: 85 mm 3-3/8 inch Taper of spindle bore M.T.#7 (Sleeve M.T.#5) Range of spindle speeds Automatic shift High - Middle - Low 2200~491 - 490~125 - 124~27 RPM Longitudinal travel (Z axis) 2160 51.2 in.
Cross slide travel (X axis) (Ball screw 25㎜x 5㎜ C5) 295㎜ 11.6 inch Rapid travel/Cutting feed rate 180 / 120 ipm Tool Max. size cutting tool 25 mm or 1 inch (4-way tool post) Tailstock Tailstock quill diameter 63 mm 2.5 inch Tailstock quill Taper M.T.#5 Tailstock quill travel 180 mm 7 inch Motor Main spindle motor 10 HP. 7.4 kw Machine Net weight 6,270 lbs. 2,850 kgs. / 6,930 lbs. 3150 kgs. / 7,700 lbs. 3500 kgs. Crate Dimension (L x W x H) 126”x74”x77” STANDARD ACCESSORIES: Tools & box Full guarding Shop floor programming/Conversational Leveling bolts & plate USB 2.0 15” color LCD RS-232 Interface Auto lube system Halogen work light Operation manual Coolant system 1 GB solid state hard drive Additional Accessories information: 4 way electric tool post Type of oil for Way oil / Gear oil / pneumatic oil Mobil Vectra #2 / Mobil 1 gear / Air tool oil Coolant capacity 3.5 Gallons
Machine sold for over 60K new by netmachinery
|
Electrical Description |
|
Comments: |
- This machine is like new with only training hours.
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1990 Make - Okuma Model - LC20 4axis simulturn |
---|
FOR SALE: Ad # 14801 , Year = 1990 , Make = Okuma , Model = LC20 4axis simulturn |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: Dual Turret!!
|
Ad #
14801 |
Year:
| 1990
|
Make:
| Okuma
|
Model:
| LC20 4axis simulturn
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 14000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
-
1-OKUMA LC20 4 AXIS CNC LATHE SERIAL NUMBER APPROX. DATE OF Manufacture : ======================================== SPECIFICATIONS SUBJECT TO VERIFICATION: std mfg.SPECIFICATIONS:below SWING OVER BED 15.74"MAX. TURN DIA. x MAX. WORK LENGTH 11.81"x 29.52" SPINDLE BORE ..... 2.04" SPINDLE NOSE ....... A2-6 SPINDLE SPEED RANGE .... 65-3500 RPM LONGITUDINAL TRAVEL, UPPER ... 30.3" LONGITUDINAL TRAVEL, LOWER 23.58" CROSS SLIDE TRAVEL, UPPER . 6.49" CROSS SLIDE TRAVEL, LOWER 4.52" RAPID TRAVERSE X/Z - 196/393 IPM NUMBER OF TOOL STATIONS . 8 + 8 TAILSTOCK QUILL STROKE 5.9" TAILSTOCK TAPER MT#5 MAIN SPINDLE MOTOR DC 15/22 kw APPROX WEIGHT 14,300 LBS. EQUIPPED WITH: - OSP 5000L-G CONTROL w/IGF - HYDRAULIC COLLET CHUCK - 8 POSITION UPPER & LOWER TURRETS - TAILSTOCK - CHIP CONVEYOR no tooling you can turn and bore at same time on this machine!
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Giddings & Lewis Model - Smart turn H-18 |
---|
FOR SALE: Ad # 10223 , Year = , Make = Giddings & Lewis , Model = Smart turn H-18 |
|
Category: Turning Center 11 in. & over chuck
|
Capacity:
|
Ad #
10223 |
Year:
|
|
Make:
| Giddings & Lewis
|
Model:
| Smart turn H-18
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
|
Comments: |
- Good CNC Lathe for roughing
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - Make - Clausing Model - Colchester |
---|
FOR SALE: Ad # 9020 , Year = , Make = Clausing , Model = Colchester |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 15 x 50 manual lathe
|
Ad #
9020 |
Year:
|
|
Make:
| Clausing
|
Model:
| Colchester
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 2600lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 7-1/2 HP / 2000RPM
7-1/2" over cross slide centers 50" between centers includes a 3 jaw chuck Spindle bore: 2-3/16" D1-6 Spindle nose. travel dial on cross slide 15 1/2" swing over bed. 9 3/8" over crosslide 22 1/2" over gap. Quick change toolpost W/ holders #4 Morse taper in tailstock quill
|
Electrical Description |
|
Comments: |
- Machine was completly rebuilt in 2001/2
|
|
|
FOR SALE: Year - 1977 Make - Clausing Colchester Model - M8112 |
---|
FOR SALE: Ad # 14326 , Year = 1977 , Make = Clausing Colchester , Model = M8112 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 21"swing x 112"centers
|
Ad #
14326 |
Year:
| 1977
|
Make:
| Clausing Colchester
|
Model:
| M8112
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6000
|
Dimension: L x W x H | 150"x4' x5' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Clausing Colchester #M8112
21"swing x 112"centers Lube pumps work, head sounds very good, has 4jaw, 3jaw and face plate, taper attachment, coolant pump, steady rest, Chip guard, 4 way tool holder, travel dial on long feed.
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1979 Make - Tos Model - SUS 63 |
---|
FOR SALE: Ad # 13421 , Year = 1979 , Make = Tos , Model = SUS 63 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 25" x 320"
|
Ad #
13421 |
Year:
| 1979
|
Make:
| Tos
|
Model:
| SUS 63
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 20,500
|
Dimension: L x W x H | (L x W x H) 400" x 69" x 55" |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- TOS Engine Lathe
Model: SUS 63 | Age: 1979 | Ref #: 20629 Specifications: Maximum Swing Over Bedways 25" Maximum Swing Over Cross Slide 15.3" Distance Between Centers 320" Spindle Hole Diameter 3.2" Spindle Speeds: (22) 9-1120 RPM Spindle Nose (Camlock) D1-11 Cross Slide Traverse 16.5" Tool Rest Traverse 8" Dimensions of 4-Way Tool Post 8.5" x 8.5" Number Positions 4-Way TP Adjustable 24 Tailstock Quill Diameter 5.1" Tailstock Quill Travel 13" Tailstock Taper #6 MT Tailsock Max Thrust Force 7,720 lbs Maximum Work Piece Capacity 13,300 lbs Longitudinal Feeds: .0022-.0591 IPR Threads, Inch .125-56 TPI Threads, Metric .5-112 MM Threads, Whitworth .25-56 TPI Threads, Module .25-56 Threads, DP .5-112 Threads, CP .0015-3.5 Bed Width 23" Bed Height 32" Machine Dimensions (L x W x H) 400" x 69" x 55" Machine Weight 20,500 lbs EQUIPPED WITH: 20" 4-Jaw Chuck 4-Way Tool Post with 24 Adjustable Positions Inch/Metric/Whitworth/Module/DP & CP Threading Hardened & Ground Ways (1) 15" Capacity Steady Rest Follow Rest Leadscrew & Feed Shaft Support Coolant System Full Length Chip Pan 30 HP Spindle Drive Motor 220/380/440/3/60 Also Available at Additonal Cost: (2) 26" 4-Jaw Chucks (#20644 & #20645) (1) Adjustable Tool Post Milling Attachment (#20640) (1) Fixed Tool Post Mill Attachment (#20641) Excellent Condition!
|
Electrical Description |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1992 Make - Victor Model - 24x200 |
---|
FOR SALE: Ad # 11400 , Year = 1992 , Make = Victor , Model = 24x200 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 24 swing x 200 centers
|
Ad #
11400 |
Year:
| 1992
|
Make:
| Victor
|
Model:
| 24x200
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 13,000
|
Dimension: L x W x H | 250" x 3' x 5' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 24 swing x 200 centers
25" swing over ways W/ 15" swing over cross slide 200" between centers, 3-jaw and 4-jaw chucks, taper attachment, 3-1/8" spindle bore steady rest, rapid traverse, Inch & metric threading foot brake, tailstock-2 speed w/ 5MT repeats very well.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1980 Make - Logan Model - 2555VLH |
---|
FOR SALE: Ad # 9317 , Year = 1980 , Make = Logan , Model = 2555VLH |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 10" swing over bed / 18" between centers
|
Ad #
9317 |
Year:
| 1980
|
Make:
| Logan
|
Model:
| 2555VLH
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 1500 lbs appx
|
Dimension: L x W x H | 72"x24"x48" |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 12" swing over bed /no gap / 18" between centers
Has 8" 3jaw chuck/ 2 tool holders V/S Spindle Drive 55/2000 RPM. Live center and new drill chuck. parts manual can skidded
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - 1989 Make - Hurco Model - CNC-BMC 20 |
---|
FOR SALE: Ad # 9019 , Year = 1989 , Make = Hurco , Model = CNC-BMC 20 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: xyz travels / 22" x 14" x 14" cap 550lbs.
|
Ad #
9019 |
Year:
| 1989
|
Make:
| Hurco
|
Model:
| CNC-BMC 20
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Requires rigger
|
Weight: | 6000lbs.
|
Dimension: L x W x H | 86" x 96" x 100" |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Under power and used periodically.
Has Ultramax control 10 HP w/6000 rpm range. 40 Taper Spindle rebuilt 5 yrs. ago. travels: 22 x 14 x 14. Table 30" x 14" 16 Station Toolchanger Std. specs below-please verify. Hurco BMC20 with Ultimax Dual Screen Conversation Control (Conversational CRT & Graphics CRT)
Overall Table Dimensions 33.75" x 15.75" Working Surface 30.125" x 13.75" Max. Table work load 550 lbs. Travels 22" x 14" x 14" Spindle Taper 40 Spindle Speeds (2 Ranges) 60 - 6,000 rpm Automatic Tool Changer 16 stations Net Weight 5,500 lbs Floor Space 94" x 111" x 136"
Standard Features Include:
Ultimax Dual Screen Conversational/Graphics Control with G Code Programming Capabilities
RS232 Port
Full Enclosures
All Available Manuals
|
Electrical Description |
|
Comments: |
- Runs good.
can rent fork & load it for $650.00
|
|
|
FOR SALE: Year - 1990 Make - Fadal Model - FADAL 4020 VERTICAL MACHINING |
---|
FOR SALE: Ad # 13452 , Year = 1990 , Make = Fadal , Model = FADAL 4020 VERTICAL MACHINING |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 47.9" x 20"
|
Ad #
13452 |
Year:
| 1990
|
Make:
| Fadal
|
Model:
| FADAL 4020 VERTICAL MACHINING
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: | 10000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Michigan
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Fadal VMC 4020
CNC 88 Control With SMW MODEL ET 315 (5) DEGREE INDEX TABLE 12" DIA. WITH TAIL STOCK AND T-SLOTTED FIXTURE TABLE TRUNION STYLE Vertical Machining Center Machine Description FADAL 4020 VERTICAL MACHINING CENTER and SMW MODEL ET 315 4th Axis Year : 1990 Specifications:(are accurate to the best of our knowledge) CONTROL TYPE......................: FADAL 88 TABLE SIZE........................: 47.9" X 20" (X)...............................: 40" (Y)...............................: 20" (Z)...............................: 28" SPINDLE SPEEDS....................: 10,000 RPM SPINDLE DRIVE.....................: 15 HP SPINDLE TAPER.....................: CAT 40 TOOL CHANGER......................: 21 ATC EQUIPPED WITH: SMW MODEL ET 315 (5) DEGREE INDEX TABLE 12" DIA. WITH TAILSTOCK AND T-SLOTTED FIXTURE TABLE TRUNION STYLE FADAL FACTORY CHIP CONVEYOR MACHINE MANUALS COOLANT TANK AND PUMP This machine is in very good working order. You may inspect under power SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1991 Make - Zayer Model - KF- 5000 |
---|
FOR SALE: Ad # 13418 , Year = 1991 , Make = Zayer , Model = KF- 5000 |
|
Category: CNC Horizontal Milling Machines w\o ATC
|
Capacity: table 22,000 lbs. cap- 4 Axis -- 40HP
|
Ad #
13418 |
Year:
| 1991
|
Make:
| Zayer
|
Model:
| KF- 5000
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 60,000
|
Dimension: L x W x H | Travels x185"/y59"/z47" |
Machine Location:
|
City: |
On Request
|
State: |
Wisconsin
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Zayer KF-5000 Bed Type Milling Machine
Year: 1991 Model: KF-5000 General Specifications: Axis number 4 spindle Power 40 HP Spindle speed 3000 RPM Spindle Taper ISO # 50 Table size =39.4" x 197" Table capacity 22,000 Lbs X Axis- 185.1" Y Axis Travel 59.1" Z Axis-47.28" machine Weight- 59,400 Lbs Equipped With: Control: Fanuc 15m 1-Head Vertical # 50 Taper w/Horizontal # 50 Taper 1-Head Universal w/# 50 Taper Additional Vertical/Horizontal CNC Rotary Table w/Tailstock-Table Diameter 39.4"
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1986 Make - Acromax Model - MX16 |
---|
FOR SALE: Ad # 9315 , Year = 1986 , Make = Acromax , Model = MX16 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Table size/ 24" x 16" x 18"
|
Ad #
9315 |
Year:
| 1986
|
Make:
| Acromax
|
Model:
| MX16
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 6200 lbs.
|
Dimension: L x W x H | 74" x 69" x 95" |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Table size/ 24" x 16" x 18"
16 tool ATC Fanuc M-11 control/ 45 to 6000 rpm infinetly variable spindle/ 30 taper/ 5.5 HP tool changer needs very minor repair-limit switch or relay?
|
Electrical Description |
|
|
|
FOR SALE: Year - 1985? Make - Monarch Model - VMC-45 |
---|
FOR SALE: Ad # 10222 , Year = 1985? , Make = Monarch , Model = VMC-45 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: TRAVEL X 30", Y 18", Z 15"
|
Ad #
10222 |
Year:
| 1985?
|
Make:
| Monarch
|
Model:
| VMC-45
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- MTRAVEL X 30", Y 18", Z 15"
ill Rebuilt by Monarch 10 years ago. Fanuc Control 11MA ??
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 80's Make - Bridgeport Model - 1-1/2 HP |
---|
FOR SALE: Ad # 13679 , Year = 80's , Make = Bridgeport , Model = 1-1/2 HP |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9x42
|
Ad #
13679 |
Year:
| 80's
|
Make:
| Bridgeport
|
Model:
| 1-1/2 HP
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 9x42" Reconditioned head. Newly ground and scraped ways, new x and y axis screws and nuts, new 2 axis DRO. new lube system. new power drawbar.power feed on "x" axis.
Can deliver.also has coolant pump inside base... not wired.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1980 Make - Bridgport Model - Series II |
---|
FOR SALE: Ad # 12257 , Year = 1980 , Make = Bridgport , Model = Series II |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9x42
|
Ad #
12257 |
Year:
| 1980
|
Make:
| Bridgport
|
Model:
| Series II
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 6x5x7 |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 2 HP head sounds good.
Has broaching attachment. Table feed not working. May just be a fuse. vise included head is a little noisy-no big issue-
|
Electrical Description |
|
|
|
FOR SALE: Year - 1980 Make - Bridgport Model - Series II |
---|
FOR SALE: Ad # 12257 , Year = 1980 , Make = Bridgport , Model = Series II |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9x42
|
Ad #
12257 |
Year:
| 1980
|
Make:
| Bridgport
|
Model:
| Series II
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 6x5x7 |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 2 HP head sounds good.
Has broaching attachment. Table feed not working. May just be a fuse. vise included head is a little noisy-no big issue-
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Fosdick Model - 8ft arm |
---|
FOR SALE: Ad # 13410 , Year = , Make = Fosdick , Model = 8ft arm |
|
Category: Radial Drill Press
|
Capacity: 19"column x 8' arm 15 HP
|
Ad #
13410 |
Year:
|
|
Make:
| Fosdick
|
Model:
| 8ft arm
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: |
|
Dimension: L x W x H | 140" X 54" |
Machine Location:
|
City: |
On Request
|
State: |
Tennessee
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Fosdick Radial Drill
8ft arm x 19" column Size Of Base 140" X 54" Spindle Speeds (36) 14 TO 1010 RPM Spindle Travel 18" Feeds (15) .003 TO .074 IPR Tap Leads (3) 8, 11-1/2, 14 TPI Diameter Of Spindle 4-11/16" Distance Spindle To Base 15" MINIMUM, 84" MAXIMUM Taper In Spindle #6MT Travel Of Arm On Column 49" Travel Of Head On Arm 78"
|
Electrical Description |
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - Make - Dumore Model - 5-021 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 9042 , Year = , Make = Dumore , Model = 5-021 |
|
Category: Grinding Parts & Accessories
|
Capacity: 5500 RPM Tool Post Grinder
|
Ad #
9042 |
Year:
|
|
Make:
| Dumore
|
Model:
| 5-021
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 50lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Jet Model - JSG-612 |
---|
FOR SALE: Ad # 11743 , Year = , Make = Jet , Model = JSG-612 |
|
Category: Surface Grinders
|
Capacity: 6 x 12 mag chuck
|
Ad #
11743 |
Year:
|
|
Make:
| Jet
|
Model:
| JSG-612
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1400
|
Dimension: L x W x H | 40x 55x70 tall |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Manual hand operated Surfase Grinder 6 x 12
perm mag chuck, coolant
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Dumore Model - 77-22 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 9041 , Year = , Make = Dumore , Model = 77-22 |
|
Category: Grinding Parts & Accessories
|
Capacity: 1/2 HP Tool Post Grinder
|
Ad #
9041 |
Year:
|
|
Make:
| Dumore
|
Model:
| 77-22
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 50lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tool post grinder / 2850 RPM
|
Electrical Description |
|
|
|
FOR SALE: Year - 1997 Make - Clausing Model - CSG-1020ASD |
---|
FOR SALE: Ad # 14709 , Year = 1997 , Make = Clausing , Model = CSG-1020ASD |
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 10x20 Automatic surface grinder
|
Ad #
14709 |
Year:
| 1997
|
Make:
| Clausing
|
Model:
| CSG-1020ASD
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 4000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- CLAUSING Model CSG-1020ASD Precision Automatic
Surface Grinder with Stepping Motor for down feed, and AC Motor for rapid up/down. Automatic down feed function standard. Specifications: Table size..........................10" x 20" Maximum grinding length.............20" Maximum grinding width..............11" Maximum distance from table surface to spindle centerline Standard column...................19 5/8" Optional high column..............23 5/8" Standard magnetic chuck size........10" x 20" Longitudinal movement of table Maximum travel, hydraulic.........22 3/4" Maximum travel, manual............24 3/8" Table speed, infinitely variable........... 60HZ,5-25M/Min. 50HZ,5-20M/Min. Cross transverse travel Auto transverse increment..........0.02"-0.5" Maximum auto transverse travel.....10 5/8" Maximum manual transverse travel...11 3/4" Handwheel per revolution...........0.2" Handwheel per graduation...........0.01" Wheelhead vertical infeed Automatic infeed...................0.00005"- 0.002" Step feed (JOG)....................0.00005" Rapid travel approximate...........5 7/8"/min Slow travel approximate............1/8"/min Handwheel per revolution...........0.05" Handwheel per graduation...........0.0005" Grinding spindle drive Speed..............................60HZ/3450RPM 50HZ/2850RPM Power rating.......................3 HP Standard grinding wheel Diameter...........................8" Width..............................3/4", 1" Bore...............................1 1/4" Hydraulic motor, power rating........2HP x 6P Crossfeed motor, power rating........80W Elevating motor, power rating........80W Total floor space required...........94 1/2" x 57" x68 7/8" Net weight (approximate).............3982 lbs. Gross weight (approximate)...........4752 lbs. Rated power (approximate)............5 1/5 HP Packing dimensions(LxWxH)............84 1/4" 72 7/8" x 79 1/2" Standard features: Plunge and surface modes as standard Vertical feed driven by stepping motor and AC motor Vertical jog feed: 0.00005" Auto-downfeed increment: 0.00005"-0.002" Maximum Auto-downfeed amount: 0.45" Pre-set spark-out: 1-9 passes The wheelhead is raised and the table parks upon completion of the spark-out passes Optional Accessories: Electromagnetic chuck (10" x 20") Coolant system with magnetic separator Balancing stand Spare wheel flange Manual Dresser Chuck control with demagnetizer
|
Electrical Description |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1997 Make - Agie Elox Model - Mondo 20/AF-4 |
---|
FOR SALE: Ad # 11727 , Year = 1997 , Make = Agie Elox , Model = Mondo 20/AF-4 |
|
Category: RAM / Conventional EDM Machines
|
Capacity: Agie Elox Mondo 20 EDM with 3 axis travel of 10”X 8”Y 8”Z
|
Ad #
11727 |
Year:
| 1997
|
Make:
| Agie Elox
|
Model:
| Mondo 20/AF-4
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 3400lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Mondo Star 20
Agie Elox Mondo 20 Ram EDM with 3 axis travel of 10”X 8”Y 8”Z Futura V Control lots of tooling included: extra 3R head, approx: 75 tool holders, CO2 Fire Extinguisher Precision C-Axis 3R chuck 3D Orbiting Jog Box
- Capacities Nominal work piece dimensions width 630mm - length 380mm - height 165mm - Work tank internal dimensions width 630mm - length 460mm - height 230mm - Work table dimensions width 400mm - depth 300mm
Traversing path - X axis 300mm - Y axis 250mm - Z axis 250mm - Platen to table clearance min 268mm max 518mm - Maximum table load 200Kg - Maximum ram workload 25Kg - Flushing connections 3 - Nominal power connection 17Kva - Electrics - Complete With Agie future IV 1PM-EU Control system - Approximate Dimensions 145 x 133 x 221cm High - Approximate Weight 1265kgs
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1990 Make - Deckel Model - DE 10 centerCNC/ Multiform 1 |
---|
FOR SALE: Ad # 9316 , Year = 1990 , Make = Deckel , Model = DE 10 centerCNC/ Multiform 1 |
|
Category: RAM / Conventional EDM Machines
|
Capacity: 14"x 10" table
|
Ad #
9316 |
Year:
| 1990
|
Make:
| Deckel
|
Model:
| DE 10 centerCNC/ Multiform 1
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1400
|
Dimension: L x W x H | 4'x 4"x 7" |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Has a Multiform 1 Control 3 axis with a rotating spindle feature
X 220 Y 170 Z 250 - Table 350 x 240 mm 3R-System-Head - 30A-Power Catalog Specifications-verify below Travel X 8.5” Y 6.5” Z 10” Clearance table to quill 19.3 – 9.4” Clamping surface 13.7 x 9.4 Max. table load 440 lbs Internal dimensions 19.6 x 14.75 x 10” Max. filling level 9” Max. workpiece height 7.5” Max. electrode weight 110 lbs Rapid traverse 29.9” Creep feed rate .3” Max. cutting current 45A Ignition voltage 150/180/220 Pulse duration 1-3.000 Pulse interval 1-500 has orbiting cycle no tool changer can be added has manuals has less than 3865 hrs on machine Has self cleaning filtering system Approximate weight of machine 1400 lbs
|
Electrical Description |
|
Comments: |
- Needs a relay In burn curcuit-approx cost 2-3K.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1970s Make - No name plate Model - |
---|
FOR SALE: Ad # 10228 , Year = 1970s , Make = No name plate , Model = |
|
Category: Riveters
|
Capacity: 24"
|
Ad #
10228 |
Year:
| 1970s
|
Make:
| No name plate
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 400lbs
|
Dimension: L x W x H | 3x3x6 |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
|
|
FOR SALE: Year - 1990's Make - No nameplate Model - 124A |
---|
FOR SALE: Ad # 10226 , Year = 1990's , Make = No nameplate , Model = 124A |
|
Category: Riveters
|
Capacity: 24"
|
Ad #
10226 |
Year:
| 1990's
|
Make:
| No nameplate
|
Model:
| 124A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400lbs
|
Dimension: L x W x H | 3'x3'x6' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Looks to be in very good gondition. Has 24" throat
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Kenco Teledyne Model - 5k-9-150 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 9021 , Year = , Make = Kenco Teledyne , Model = 5k-9-150 |
|
Category: Miscellaneous Presses
|
Capacity: 5 ton
|
Ad #
9021 |
Year:
|
|
Make:
| Kenco Teledyne
|
Model:
| 5k-9-150
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | 4 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 285 strokes per minute / 60 cycles
includes bolster plate 5 Ton stand mounted can band to a skid
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Storm Vulcan Model - |
---|
FOR SALE: Ad # 14802 , Year = , Make = Storm Vulcan , Model = |
|
Category: Engine & Machine Shop Equip.
|
Capacity: Large
|
Ad #
14802 |
Year:
|
|
Make:
| Storm Vulcan
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Large capacity crankshaft polishing head.
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1998 Make - Storm Vulcan Model - RG-200 |
---|
FOR SALE: Ad # 14308 , Year = 1998 , Make = Storm Vulcan , Model = RG-200 |
|
Category: Engine & Machine Shop Equip.
|
Capacity: Crankshaft Grinder "REDUCED"
|
Ad #
14308 |
Year:
| 1998
|
Make:
| Storm Vulcan
|
Model:
| RG-200
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 4500
|
Dimension: L x W x H | 14' x 7' x 5' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- used Storm Vulcan RG-200 crank shaft grinder
One owner Specifications Standard Equipment • Max. distance between chucks: ? • Max. distance between centers:? • Max. swing over table:7.78" • Stroke capacity: ? • Grinding wheel diameter: ? includes 4 stones, balancer & diamond dresser,2 wheel hubs,indicator holders for rod mains & main journals
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 90's Make - Brown & Sharpe Model - Microval 343 |
---|
FOR SALE: Ad # 11510 , Year = 90's , Make = Brown & Sharpe , Model = Microval 343 |
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: 16" x 24" manual
|
Ad #
11510 |
Year:
| 90's
|
Make:
| Brown & Sharpe
|
Model:
| Microval 343
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 400 lbs
|
Dimension: L x W x H | 2'x3'x6' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- manual cmm B & S Microval
16" x 24" table air hoses have been replaced software: micro measure 2 can be upgraded with a reflex box from factory for 6K comes with renishaw probe This cmm works great since replacing air lines. Owner needed a larger one. They are using table as a granite table. manuals
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2006 Make - Model - 201 |
---|
FOR SALE: Ad # 10221 , Year = 2006 , Make = , Model = 201 |
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: 10 to 1
|
Ad #
10221 |
Year:
| 2006
|
Make:
|
|
Model:
| 201
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | New, in crate
|
Shipping Info: | We can load
|
Weight: | 300 lbs
|
Dimension: L x W x H | 3'x3'x6' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- This machine is a Fluid dispenser that was purchased to dispense silicone but never used. Also has self cleaning nozzle attachment.
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1995 Make - Autorotor Model - T25512270 |
---|
FOR SALE: Ad # 10224 , Year = 1995 , Make = Autorotor , Model = T25512270 |
|
Category: Misc. Robots
|
Capacity:
|
Ad #
10224 |
Year:
| 1995
|
Make:
| Autorotor
|
Model:
| T25512270
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 1000lbs
|
Dimension: L x W x H | 4x4x8 |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 90s Make - Model - |
---|
FOR SALE: Ad # 10230 , Year = 90s , Make = , Model = |
|
Category: General Material Handling
|
Capacity: 20' Carousel
|
Ad #
10230 |
Year:
| 90s
|
Make:
|
|
Model:
|
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 1000lbs
|
Dimension: L x W x H | 20'x4'x8' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Has 20 baskets 22" wide x 12" deep x 36" tall.
Perfect for powder coat or painting operation. Also has 16 110 receptacles underneath for mass production.
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2008 Make - Powermatic Model - PWBS-14 |
---|
FOR SALE: Ad # 11556 , Year = 2008 , Make = Powermatic , Model = PWBS-14 |
|
Category: Saws
|
Capacity: 6" high 13" wide / 15"x15" table
|
Ad #
11556 |
Year:
| 2008
|
Make:
| Powermatic
|
Model:
| PWBS-14
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 250
|
Dimension: L x W x H | 2'x2'x6' |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Like new/// Comes with 6" riser block, mobile base,
fence and miter head, Charter blade guides, quick release blade tensioner, and 3/16, 1/2, 3/4" blades in sealed cartons.
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|