User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 97/95 Make - mazak Model - Super Quick turn 15M mark 2 |
---|
FOR SALE: Ad # 9232 , Year = 97/95 , Make = mazak , Model = Super Quick turn 15M mark 2 |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: (2) Mazak in production 8"chuck qt-15n
|
Ad #
9232 |
Year:
| 97/95
|
Make:
| mazak
|
Model:
| Super Quick turn 15M mark 2
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 12k
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Std. specs below-please verify
Maximum Swing 20.9" 530 mm Maximum Swing Over Carriage 15.74" 400 mm Maximum Cutting Diameter 11.75" 300 mm Maximum Bar Diameter 2.0" Maximum Cutting Length 20.78" 51 mm Spindle Bore 2.4" 61 mm Spindle Speed 35 - 5,000 RPM Spindle Horsepower 25HP Turret Index Time 0.5 sec./step 1.3 sec./6 step Stroke: Travel X - Axis Travel Z - Axis 7.12" 181 mm
21.75" 552 mm Rapid Traverse X/Z Axis 1180IPM 29,972 mm/m Tailstock Spindle Center MT #5
8"chuck tool setter eye programable tailstock chip conveyor rpm -one 3500 other 5000 live tooling T-plus control (2) machines available
|
Electrical Description |
|
Comments: |
- 2 available-one with live tooling one without..
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 200? Make - Takisawa Model - T-200 |
---|
FOR SALE: Ad # 9240 , Year = 200? , Make = Takisawa , Model = T-200 |
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 8" chuck -dia max 9.45 x 3.94 length
|
Ad #
9240 |
Year:
| 200?
|
Make:
| Takisawa
|
Model:
| T-200
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Chuck Size 8"
Max Swing Over Bed 16.5" Max Turning Diameter 9.45" Max Machining Length 3.94" Main Motor 15 HP Tools 10 Spindle Speed 4000 RPM Spindle Bore 2.48" Spindle Nose A2-6 Rapid Traverse Rates (X & Z) 945 IPM X-Axis Travel 6.3" Z-Axis Travel 7.87"
FEATURES: FANUC 21iTB CNC CONTROL Gantry Robot with Turnaround Device Load / Unload Conveyor on Right Side 9" Monochrome CRT 8" Kitagawa N-08 Hydraulic Chuck Chip Conveyor (Rear Exit) Three Color Tower Light (4) Machines Available
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - 1998 Make - chiron Model - FC 12 W |
---|
FOR SALE: Ad # 9221 , Year = 1998 , Make = chiron , Model = FC 12 W |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Twin pallet, 5 second workpiece change time.
|
Ad #
9221 |
Year:
| 1998
|
Make:
| chiron
|
Model:
| FC 12 W
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 6600
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- CHIRON FZ-12W
Travel: X-Axis 21" Y-Axis 12" Z-Axis 16" Table Size 26" x 13.8" Spindle Speed 20 - 10,500 RPM Main Motor 7.5 HP Spindle Taper Cat 40 Tools 12 Spindle Nose to Table Top 8.2" - 24.2" Table Load Capacity 330 lbs. Rapid Traverse Rates 1600 IPM Tool Change Time (T-T / C-C) 0.9 / 2.4 Seconds Max Tool Diameter 3.9" / 5.9" Max Tool Weight 11 lbs. Machine Dimensions (L x W x H) 116.8" x 86" x 115" Machine Weight 6600 lbs. FEATURES: GE FANUC OM CNC CONTROL 12 Tool Magazine Turbo Microfine Chip Conveyor Auto Two Pallet Changer (Rotary Type)
Twin pallet, 5 second workpiece change time. ·1.0 second tool change, 4.0 second chip-to-chip time chip conveyor coolant filters ·Axis travels X-550mm, Axis Y-300mm, Axis Z-425mm 40 taper flood coolant new spindle installed in 2008 MAGNUM HIGH SPEED VERTICAL MACHINING CENTER MADE IN GERMANY! HIGH PRECISION AND RELIABILITY RIGID TAPPING INTEGRATED WORKPIECE CHANGER, ZERO TO 180 DEGREES IN 2.9 SECONDS! CAT-40 TAPER, 10,500 R.P.M. 7.5 H.P., (12) ATC TRAVELS: X-21", Y-12", Z-16" TWO WORK TABLES 26"X 13.8" WITH HOLE PATTERN AND SPLASH GUARD FANUC O-M CONTROL
|
Electrical Description |
|
Comments: |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 199? Make - Miyano Model - LZ-01 |
---|
FOR SALE: Ad # 9226 , Year = 199? , Make = Miyano , Model = LZ-01 |
|
Category: Swiss Type Automatic
|
Capacity: 2.75 max dia
|
Ad #
9226 |
Year:
| 199?
|
Make:
| Miyano
|
Model:
| LZ-01
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 6500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Specification Description
CUTTING DIAMETER / LOADER CAPACITY 2.75" WORK LENGTH / LOADER CAPACITY 3.15" MAX SWING 12.6" TURRET POSITIONS 8 SPINDLE MOTOR 10 HP SPINDLE SPEED 60 - 6,000 RPM MAX WORKPIECE WEIGHT 3.3 LBS x 2 MACHINE DIMENSIONS (L x W x H) 65" x 55" x 60" MACHINE WEIGHT 6,500 LBS
Equipped With:verify below FANUC 21-TB CONTROL GENERAL PURPOSE LOADER w/ 2 GRIPPERS & SHUTTER IN / OUT PARTS CONVEYOR SPINDLE AIR BLOW COOL JET HIGH PRESSURE COOLANT SYSTEM PARTS COUNTERS LIFT UP CHIP CONVEYOR 3-JAW HYDRAULIC CHUCK COOLANT SYSTEM MANUALS Fanuc 21 control parts load/unload chip conveyor transformer NEWLY REBUILT SPINDLE
|
Electrical Description |
|
|
|
FOR SALE: Year - 2002 Make - Miyano Model - LZ-02 |
---|
FOR SALE: Ad # 9223 , Year = 2002 , Make = Miyano , Model = LZ-02 |
|
Category: Swiss Type Automatic
|
Capacity: 3.93 max dia
|
Ad #
9223 |
Year:
| 2002
|
Make:
| Miyano
|
Model:
| LZ-02
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 7500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- MODEL: LZ-02---std specs--please verify
TURNING DIAMETER -------------------------- 3.930" TURNING LENGTHS --------------------------- 3.150" SPEED ------------------------------------- 40 TO 4000 RPM DRIVE MOTOR ------------------------------- 15 HP INDEX INCREMENT --------------------------- 0.001 DEG. MAXIMUM NUMBER OF TOOLS --- ( TURNING ) --- 8 APPROXIMATE MACHINE DIMENSIONS ------------ 104"(LR) X 93"(FB) X 84"(H)
EQUIPPED WITH:
GENERAL PURPOSE LOADER WITH GRIPPERS AND SHUTTER FANUC 21T CONTROL SPINDLE ORIENTATION 8" 3 JAW CHUCK MISCELLANEOUS O.D. AND I.D. TOOL HOLDERS CHIP CONVEYOR
Fanuc 21-T control 8 station turret chip conveyor transformer with machines
|
Electrical Description |
|
Comments: |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 90's Make - Max Model - 2550CNC |
---|
FOR SALE: Ad # 9239 , Year = 90's , Make = Max , Model = 2550CNC |
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: cnc 10 x 20
|
Ad #
9239 |
Year:
| 90's
|
Make:
| Max
|
Model:
| 2550CNC
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 10 x 20 table
siemens control coolant filter sys 10" x 2 wheel size auto dresser
|
Electrical Description |
|
|
|
FOR SALE: Year - 96 Make - Jackmill Model - JMAC600CNC |
---|
FOR SALE: Ad # 9222 , Year = 96 , Make = Jackmill , Model = JMAC600CNC |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: angular cnc OD 10.2" swing x 23.6"
|
Ad #
9222 |
Year:
| 96
|
Make:
| Jackmill
|
Model:
| JMAC600CNC
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 5500lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Fanuc 21I-TB control
Rs232 # JMA-C-600/ENC2N coolant and paper filter w/ parts gaging sys includes trasformer
CNC CYLINDRICAL GRINDER (ANGULAR TYPE) JMAC-600 CNC-2N std specs verify below Capacity Distance between Centers M.M. 600 Max. Grinding Diameter M.M. Ř260 Work Table Travel per Handwheel Rotation M.M./REV 0.1,1,10 Workhead & Tailstock Workhead Work Center Taper M.T. NO.4 Tailstock Work Center Taper M.T. NO.4 Workhead Spindle Speed R.P.M 50-600 Wheelhead Grinding Wheel Size (OD.x Width x ID.) M.M. Ř405x50xŘ127 ?? Grinding Wheel Swivel ±30° Shipping Dimension C.M. 220x200x180 Net Weight KGS 2500
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Colonial Model - C60RD5-30 |
---|
FOR SALE: Ad # 9224 , Year = , Make = Colonial , Model = C60RD5-30 |
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: vertical pull down broach-5 ton 30 in stroke
|
Ad #
9224 |
Year:
|
|
Make:
| Colonial
|
Model:
| C60RD5-30
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Vertical broaching machine
5 ton -verify ? 30 inch stroke-? oil filter sys. attached Please verify specs above
|
Electrical Description |
|
Comments: |
- Vertical Broaching
Vertical broaching refers to the type of machine that is used to broach a piece part. These machines come in many varieties and adaptations, but in general any machine in which the ram is mounted vertically, instead of horizontally, is classified as a vertical broaching machine. In the case of surface broaching, the ram, which carries its broaching tools mounted in holders, typically moves past the piece part. The piece part is secured in a fixture using hydraulic or mechanical clamps. Some traditional vertical broaching machines are dual- ram, meaning that there are actually two rams mounted on the same machine, and sharing the same hydraulic and mechanical systems. In many cases the part is secured in a shuttle table or swing table, so that the operator can load one piece to be machined, while the other ram is cutting another piece at the same time. Dual-ram vertical broaching machines can also be used to cut two or more successive operations on the same part.
Vertical broaching machines can also be used to cut internal shapes and forms, and can perform very much like traditional horizontal machines. In each case either the piece part is secured while the broaching tool moves past it, or the broach itself is secured while the piece part travels on a table. The former type of machine can be either of the vertical pull-down or pull-up variety (referring to the motion of the broaching tool). The latter is typically referred to as a table-up vertical broaching machine. There are many advantages to using vertical broaching in internal applications, including the tendency to better hold tolerances.
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2006 Make - Sunnen Model - VSS-64-E -S17 |
---|
FOR SALE: Ad # 9233 , Year = 2006 , Make = Sunnen , Model = VSS-64-E -S17 |
|
Category: Horizontal and Vertical Hones
|
Capacity: Vertical Single Stroke Honing® System Cap: dia 0.23-.748
|
Ad #
9233 |
Year:
| 2006
|
Make:
| Sunnen
|
Model:
| VSS-64-E -S17
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 3550
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Vertical Single Stroke Honing® System
GENERAL INFORMATION & SPECIFICATIONS-please verify below VSS™-64 6 STATIONS - 4 SPINDLES Sunnen® Vertical Single Stroke Honing® System Diameter Range (ID):1 5,92-19,00 mm (0.233-0.748 in) For diameters above or below stated range, call Sunnen in St. Louis. Workpiece2 - Maximum Height: 150 mm (5.9 in) Maximum Weight: (See Indexing Table below) Maximum Size: 150 x150 x 150 mm (6 x 6 x 6 in) For larger sizes, call Sunnen in St. Louis. Spindle - Spindle Speed Range: 100 to 2500 rpm Spindle Motor: 10 Hp Stroking (Ball Screw Drive) - Speed Range: 250 to 6350 mm/min (10 to 250 IPM) Vertical Travel: 400 mm (15.7 in) Indexing Table - Workpiece & Fixture Weight: Maximum total workpiece & fixture weight that may be used on the index table is 113 kg (250 lbs). Coolant System Connection3 - Supply Port: Hose Barb for 25mm (1in.) ID Hose Return Port: Hose Barb for 51mm (2in.) ID Hose Electrical System - Electrical Requirements: 440/460 V, 50/60 Hz, 35/30 A Control: Industrial Embedded PC Temperature Range: 0° to 35° C (32° - 95° F) (Optional cooling unit is available). Floor Requirement (Concrete): 150 mm (6 in.) minimum thickness Floorspace (Machine Only): 2290 W x 1525mm L (90 x 60 in.) 1 Diameter range, length range, and workpiece weight are contingent on workpiece and application. 2 Stroke length & workpiece weight is contingent on machine configuration and application. 3 Machine not supplied with Coolant System. Call Sunnen Product Co. in St. Louis.
4 head 6 station mag seperator and paper filter-Euro quadri floating fixtures great production machine
|
Electrical Description |
|
Comments: |
- Very nice unit..low hrs
machine is C/E cert. machine was just gone thru end of jan..2010 by sunnen cert. tech.
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1987 Make - Schmid Model - 20-T630 |
---|
FOR SALE: Ad # 9932 , Year = 1987 , Make = Schmid , Model = 20-T630 |
|
Category: Miscellaneous Presses
|
Capacity: Schmid Orbital forming Press-630 Ton
|
Ad #
9932 |
Year:
| 1987
|
Make:
| Schmid
|
Model:
| 20-T630
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South East
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 630 Ton=6300KN-Ram Force
Specification: Ram Force 6300 kN, Ram Travel 300mm, Orbital Angle 0-2 deg, Workpiece Max Diameter 150mm, Max Workpiece Weight 4000g Machine can be inspected under power Machine is well tooled to produce a variety of blanks Orbital Cold forming or forging is metal forming process during which a malleable billet is transformed between a lower die into a component with Near Net Shape characteristic. 300MM Ram travel light curtain total parts run-3,313,261
|
Electrical Description |
|
Comments: |
- New machine costs 2.6 million.
Will need rigged out of facility cost approx approx:$25,000 Also will need to be Dissassembled approx:$80,000
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Interpower Model - interscan |
---|
FOR SALE: Ad # 9225 , Year = , Make = Interpower , Model = interscan |
|
Category: Heat Treat Ovens
|
Capacity: Induction-2 station, 4spindle
|
Ad #
9225 |
Year:
|
|
Make:
| Interpower
|
Model:
| interscan
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- complete 2 station 4 spindle production machine WITH COOLANT TOWER complete
machine looks new lightly used
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|