|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 19 matching ads. Now displaying the remaining 19 ads.
| FOR SALE: Year - 2002 Make - OKUMA Model - LU-15-2SC-1000 |
|---|
| FOR SALE: Ad # 8994 , Year = 2002 , Make = OKUMA , Model = LU-15-2SC-1000 | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: Chuck 8"
|
| Ad #
8994 |
| Year:
| 2002
|
| Make:
| OKUMA
|
| Model:
| LU-15-2SC-1000
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Chuck 8"
Bar Capacity 2"
Turning Diameter 14"
RPM 4,500
Centers 40"
Twin Turret 12 +8
30HP
20" Swing
Equipped With E100 Control
Chip Conveyor
Tail Stock
A2-6 Spindle Nose
Transformer
Side Discharge Chip
|
|
|
| FOR SALE: Year - 1985 Make - Mori Seiki Model - SL-8F |
|---|
| FOR SALE: Ad # 8842 , Year = 1985 , Make = Mori Seiki , Model = SL-8F |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 32" Chuck
|
| Ad #
8842 |
| Year:
| 1985
|
| Make:
| Mori Seiki
|
| Model:
| SL-8F
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Max Swing 51.1"
Max Machining Diameter 51.1"
Spindle Bore 8.5"
Spindle Nose A2-15
Spindle Speeds (3Gear Range) 1-143 RPM
Turret Position 6
Spindle Motor 40HP (AC)
Equipped With
Fanuc OT
32" Manual Chuck
Misc. Tool Holders
Chip Conveyor
|
|
|
| FOR SALE: Year - 2002 Make - Topper Model - HS-20-6T |
|---|
| FOR SALE: Ad # 8852 , Year = 2002 , Make = Topper , Model = HS-20-6T |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" Chuck
|
| Ad #
8852 |
| Year:
| 2002
|
| Make:
| Topper
|
| Model:
| HS-20-6T
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 9,259lbs
|
| Dimension: L x W x H | 131.89" x 70" x 68.9" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Fanuc 18T
8 Kitagawa Chuck- Main Spindle
12 Station Main Turret
6 Station Sub Turret
Parts Catcher & Conveyor
Topper BG-1200 Barfeeder (4' Bars)
Chip Conveyor
Swing Over Bed 19.689"
Swing Over Saddle 10.63"
Turning Diameter 9.84"
Turning Length 15.75"
Bar Size 2"
Cutting Feed 0.001-500
Motor HP 15
Nose A2-6
Speed 45-4500 RPM
Travel X Axis 7.48"
Rapid Traverse X Axis 1181 IPM
Servo Motor Power X Axis 1
Travel Z Axis 15.75"
Servo Motor Power Z Axis 1
Rapid Traverse Z Axis 1181 IPM
Turret Type V12
Max Round Shank 1.26"
Max Square Shank .098"
Sub Turret Type Elec V6
Coolant Motor Power 180w
|
|
|
| FOR SALE: Year - 2003 Make - Takahashi Model - TNC-L-T1 |
|---|
| FOR SALE: Ad # 8851 , Year = 2003 , Make = Takahashi , Model = TNC-L-T1 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 6" Chuck
|
| Ad #
8851 |
| Year:
| 2003
|
| Make:
| Takahashi
|
| Model:
| TNC-L-T1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 9,900lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Maximum Machining Diameter 6"
Maximum Bar Diameter 1.5"
Maximum Z Axis Turning Length 6"
Spindle Speeds 60-8000RPM
Tool Capacity 8 Station
Spindle Drive Motor 7.5HP
Equipped With 6" Thru Hole Hydraulic Chuck
Coolant System
Manual Barfeeder
|
|
|
| FOR SALE: Year - 1989 Make - Tsugami Model - FA45 |
|---|
| FOR SALE: Ad # 8853 , Year = 1989 , Make = Tsugami , Model = FA45 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" Chuck
|
| Ad #
8853 |
| Year:
| 1989
|
| Make:
| Tsugami
|
| Model:
| FA45
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Collet Capacity 1.5"
Chuck Size 8" (optional)
Chuckable Diameter X1: 160 MM
Z1: 400 MM
Y: +/- 50 MM
X2: 110 MM
Z2: 150 MM
Rapid Traverse Speeds X1 & X2: 8m/min
Z1 & Z2: 10m/min
Y: 6m/min
C: 20 RPM
Main Spindle Speeds (High Speed Version ) 50-
5000 RPM
(Low Speed Version) 40-3,550 RPM
Maximum Cutting Torque (High Speed Version)
8.77 kgf-m/1,666 RPM
(Low Speed Version) 12.33 kgf-m/1,183 RPM
Tool Sizes (For OD Machining) 20 x115mm
For ID Machining) 25 mm (diameter)
Motors (Main Spindle) 15/11 kw
(Tool Spindles) 3.7/2.2 kw
(Hydraulic System) 1.5 kw
(Coolant System) 370 W
NC Specifications:
Type of NC System Fanuc Series OT Model A (2
Units)
No. of Controlles Axes 6 (X1, X2, Y, Z1, Z2 & C)
Minimum setting increments for all axes except C
Axis
(Diametrical Designation for X Axis) 0.001 mm
For C Axis 0.001 deg
Tape Codes EIA RS-244 & ISP 840
(Automatic Discrimination)
Rapid Traverse Speed X Axis 8m/min
Y Axis 6m/min
Z Axis 10m/min
Caxis 7200deg/min(20 RPM)
Equipped With Fanuc OT CNC Controls
Iemca Magazine Load Bar Feeder TAL65/12 AML
Splash Guards
Coolant
Chip Conveyor, Sub Spindle, Transformer
|
|
|
| FOR SALE: Year - 1998 Make - Okuma Model - LU15BB |
|---|
| FOR SALE: Ad # 8848 , Year = 1998 , Make = Okuma , Model = LU15BB |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" Chuck
|
| Ad #
8848 |
| Year:
| 1998
|
| Make:
| Okuma
|
| Model:
| LU15BB
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 25,000lbs
|
| Dimension: L x W x H | 190" X 83" X 84" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 7 Axis Two Spindle/Two Turret CNC Lathe With Milling
OSP 5020L CNC Control
Swing Over Bed 25.59"
Swing Over Carriage 9.84"
Distance Between Centers 57"
Max Turning Diameter X Length 11.81" x 11.81"
Spindle Diamter 4.72"
Spindle nose JIS A2-8
Taper Hole 3.54"
Through Spindle Hole 3.15"
No of Spindle Speed Ranges 2
Spindle Speeds 38-3800 RPM
X Axis Travel Cross Slide 10.43"
Upper and Lower Turret
Feed Rate .00001"-39.37 IPR
Rapid Feedrate 944.89"
Z Axis Carriage Travel (A) 22.4"
(B) 44.88"
(C) 22.44"
Feedrate .00001"-39.37 IPR
Rapid Feedrate 944.89"
C Axis Controllable Angle .001 Degrees
Rapid Feed Rate 200 RPM
Turret Type V12 + V12
Number of Tools on Each Turret 12
Tool Size OD Turning 1"
ID Turning 1 1/2"
M Tool Spindle Speed 35-3000 RPM
Max Tool Shank Diameter 1"
Spindle Drive Motor 30/20 HP
Cross Slide Feed Motor X Axis 5.3 HP
Carriage Feed Z Axis 5.3 HP
M Tool 5/3 HP
Hydraulic Power Unit 5 HP
Lube Pump .033 HP
Coolant Pumps .33 HP (2)
Equipped With Chip Conveyor
Coolant Tanks
LNS Bar Feeder
|
|
|
| FOR SALE: Year - 1989 Make - Mazak Model - QT10U |
|---|
| FOR SALE: Ad # 8832 , Year = 1989 , Make = Mazak , Model = QT10U |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" Chuck
|
| Ad #
8832 |
| Year:
| 1989
|
| Make:
| Mazak
|
| Model:
| QT10U
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 8,880lbs
|
| Dimension: L x W x H | 136" X 73" X 73" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing Over Bed 18"
Maximum Cutting Diameter 11.5"
Maximum Diameter Bar 1.875"
Chuck Size 8" Hydraulic
X Axis Travel 6.875"
Z Axis Travel 19"
Rapid Traverse X/Z 707/945 IPM
Spindle Nose A2-6"
Spindle Bore 2.44"
Spindle Speed 30-4000 RPM
Spindle Motor 15 HP
Spindle Torque 188 ft/lbs
Turret Type 8 Pso Drum
Equipped With Conversational Programming
Color Graphics
Automatic Tool Eye
8" 3 Jaw Hyd chuck
All Available Manuals/Tools
|
|
|
| FOR SALE: Year - 1996 Make - FMCO Model - HL-25 |
|---|
| FOR SALE: Ad # 8812 , Year = 1996 , Make = FMCO , Model = HL-25 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8"chuck
|
| Ad #
8812 |
| Year:
| 1996
|
| Make:
| FMCO
|
| Model:
| HL-25
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Max Turning Length 23.6"
Max Swing Over Bed 17.70"
Standard Turning Diameter 9.8"
Distance Between Centers 25.5"
Spindle Speed 40-4800 RPM
Spindle Nose A2-6
Hole Through Spindle 2.4"
Bar Capacity 2.04"
Chuck Diameter Standard 8.0"
Spindle Power 20/15 HP
Number of Stations 12
Rapid Traverse X Axis 787 IPM
Rapid Traverse Z Axis 787 IPM
Quill Diameter 3.0"
Quill travel 3.9"
Spindle Taper MT # 4
Equipped With Chip Conveyor
Tailstock
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1997 Make - Index Model - V200-T |
|---|
| FOR SALE: Ad # 8825 , Year = 1997 , Make = Index , Model = V200-T |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 6" chuck
|
| Ad #
8825 |
| Year:
| 1997
|
| Make:
| Index
|
| Model:
| V200-T
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Georgia
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Max Swing Diameter 10.5"
Max Turning Length 7.87"
Tool Table Dimensions Lx W 41.5" x 15.75"
Travels: X-Axis Travel 20.47"
Z-Axis Travel 7.87"
Spindle Through Capacity 2.3"
Spindle Speed Range 0-5,000 RPM
Rapid Traverse 1181 IPM @ 30 MPM
Chuck Actuator Stroke 1.26"
Chuck Size 6"
Spindle Motor 27 HP
Equipped With:
Siemens C200-4 CNC Control
Inboard Parts Conveyor
Auto Loader for Spindle #1
Auto Turn Around Device Btwn Spindle #1 & #2
Auto Loader for Spindle #2
Outboard Parts Conveyor
Misc OCD & ID Holders
Coolant Fed Holders
Special Part Locater
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2004 Make - HAAS Model - SL-20TB |
|---|
| FOR SALE: Ad # 8815 , Year = 2004 , Make = HAAS , Model = SL-20TB |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" chuck
|
| Ad #
8815 |
| Year:
| 2004
|
| Make:
| HAAS
|
| Model:
| SL-20TB
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Lathe Tool Presetter
Chip Auger System
Floppy Disk Drive 3.5"
Visual Quick Code Programming System
1 Megabyte Programming Memory
High-Intensity Lighting
Bar Feed Interface
Spindle Orientation
Parts Catcher
2.5" Big Bore Option
Fully Programmable Tailstock
High Pressure Coolant 300 PSI
Auxillary Coolant Filter System 25 Microns
Servo 300 Barfeeder
1.5" Spindle Liner
ATS S26 Collet Chuck for Big Bore
|
|
|
| FOR SALE: Year - 2004 Make - Hitachi-Seiki Model - HT200 |
|---|
| FOR SALE: Ad # 8822 , Year = 2004 , Make = Hitachi-Seiki , Model = HT200 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" chuck
|
| Ad #
8822 |
| Year:
| 2004
|
| Make:
| Hitachi-Seiki
|
| Model:
| HT200
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4,800lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Bar Capacity 2.55"
Swing Over Bed 26.77"
Max Turning Diameter 19.68"
Max Turning Length 19.68"
Capacity (Depth of Cut)
OD Turning 0.23 x.0.017 / Rev
Facing 0.196 x 0.019 / Rev
OD Grooving 0.275 x 0.004 / Rev
Face Grooving 0.236 x 0.004 / Rev
Drilling 1 1/4 x 0.013 / Rev
Spindle Speeds (Stepless) 50-5000 RPM
Spindle Bore 2.9"
Spindle Nose A2-6
Main Bearing ID 4.72"
Turret Positions 12
Turning Tool Diameter 25/40
Turret Travel
X-Axis 10.23
Z-Axis 20.47
Rapid Traverse 1574" Per Minute
Tail Stock Traverse Speed 590" Per Minute
Cuck Outer Diameter 8.26
Spindle Drive Motor 12MW
Equipped With Siecos PC Flexi CNC Control
10,000 Meter Memory
Q-Setter
High Speed One Touch NC Tailstock
Flood Coolant
Hydraulic Hollow Chuck
Chip Conveyor
Eco-Pack Self Lubricating for
Ball/Screws/Guideways
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1993 Make - Hardinge Model - Conquest 42 |
|---|
| FOR SALE: Ad # 8819 , Year = 1993 , Make = Hardinge , Model = Conquest 42 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" chuck
|
| Ad #
8819 |
| Year:
| 1993
|
| Make:
| Hardinge
|
| Model:
| Conquest 42
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Swing Over Upper Way Cover 19.5"
Swing Over Lower Way Cover 14.5"
Max Turning Diameter 9.1"
Hole Through Spindle 1.875"
16C Collet Through Capacity 1.625"
Max Power Chuck Size 8"
Spindle Orient For Live Tooling 1 Degree
Spindle RPM Range 50-5000
Turret (Live Tooling) 10 Station V Turret
Live Tool Holders Max RPM 4000
Max HP at Tool Tip 1.2 HP
Equipped With Fanuc OT-C Control
Hydraulic/Programmable Tailstock
SMW 12' Hydraulic Barfeed
Coolant System/Chip Pan
16C Collet Chuck With Misc. Collets
Various 3/4" Shank Turning Toolholders
4 Live Toolholders
Various ID Toolholders
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2003 Make - Kia Kiatrun Model - 21 |
|---|
| FOR SALE: Ad # 8826 , Year = 2003 , Make = Kia Kiatrun , Model = 21 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" chuck
|
| Ad #
8826 |
| Year:
| 2003
|
| Make:
| Kia Kiatrun
|
| Model:
| 21
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Chuck 8"
Turning Diameter 13.8"
Swing 21.6"
Distance Between Centers 16.1"
Motor 15 HP
Spindle Speed 4,000 RPM
Chuck Size 8"
Bar Capacity 2"
Equipped With:
Fanuc OiT Control / CRT
Turb Systems Chip Conveyor
Tool Setter
Parts Catcher
Programmable Tailstock
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2004 Make - DAEWOO Model - Puma V-400 |
|---|
| FOR SALE: Ad # 8795 , Year = 2004 , Make = DAEWOO , Model = Puma V-400 |
|
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 15" chuck
|
| Ad #
8795 |
| Year:
| 2004
|
| Make:
| DAEWOO
|
| Model:
| Puma V-400
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 13,230lbs
|
| Dimension: L x W x H | 81.6" X 57.2" X 127" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 24 Swing Over Bed / 19.6 Swing Over Saddle
12 Recommended Turning Diar / 19.5 Max Turning Dia
18.1 Maximum Turning Length
45.4 Height From Floor to Chuck Face
X-Axis Travel 10.6
Z-Axis Travel 19.2
30 3,000 RPM Spindle Speed
30 Horsepower Motor
8 Pos ATC / Bi Directional Index / .15 Sec Tool Change Time
A2-8 Spindle Nose
Equipped With Fanuc Control is 11 Color CRT
15 3 Jaw Chuck
Face Plate (New In Box)
1000 PSI High Pressure Coolant
Automatic Door
All Available Manuals
|
|
|
| FOR SALE: Year - 1993 Make - Amera Seikii Model - TC-4LS |
|---|
| FOR SALE: Ad # 8762 , Year = 1993 , Make = Amera Seikii , Model = TC-4LS |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 12" and 6"
|
| Ad #
8762 |
| Year:
| 1993
|
| Make:
| Amera Seikii
|
| Model:
| TC-4LS
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Fanuc OTC Control
3" Bar Capacity
13" Turning Diameter
23.6" Turning Length
30-3000 RPM Spindle Speed
40 HP AC Main Spindle Motor (Max Rating)
15 HP AC Sub Spindle Motor
12 Station Turret
Programmable Sub Spindle
Main and Sub Spindle Orientation
Turret Coolant System
High Intensity Work Light
Cycle Stop Alarm Light
Set of Amera Seiki Tool Holders
12" Kitagawa 3 Jaw Hydraulic Chuck (Main Spindle)
6" Kitagawa 3 Jaw Hydraulic Chuck (Sub Spindle)
Chip Conveyor
Parts Catcher
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2005 Make - Akira-Seiki Model - SL15 |
|---|
| FOR SALE: Ad # 8761 , Year = 2005 , Make = Akira-Seiki , Model = SL15 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 5 Collet
|
| Ad #
8761 |
| Year:
| 2005
|
| Make:
| Akira-Seiki
|
| Model:
| SL15
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6,500lbs
|
| Dimension: L x W x H | 68" X 72" X 54" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Fanuc OTC Deluxe Control
Maximum Swing Over Bed 16"
Maximum Turning Diameter 9"
Maximum Travel in X Axis 5"
Maximum Turning Length
Headstock Spindle Motor Direct Drive/ HI Torqu
15HP
Spindle RPM 20-6,000
Collet/Nose Internal Taper A2-5
Bar Capacity 1.77"
Turret Number of Stations 10 Each
Turning Tool Size (Square Shank) 3/4"
Maximum Boring Bar Size 1"
Equipped With Hydraulic Power Unit
Automatic Lubrication System
Chip Conveyor
Parts Catcher
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1996 Make - Bridgeport Model - EZ Path |
|---|
| FOR SALE: Ad # 8765 , Year = 1996 , Make = Bridgeport , Model = EZ Path |
|
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: 8" chuck
|
| Ad #
8765 |
| Year:
| 1996
|
| Make:
| Bridgeport
|
| Model:
| EZ Path
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Distance Between Center 40"
Swing Over Bed 16.5"
Trig Calculator
Tool Offsets 24 Offsets
Program Storage 80 MB Internal Hard Drive
External Input Built-in 3.5" Floppy Drive
Communication RS-232 Port
Bridgeport 2 Axis EZ Path Control
Dual Electronic Handwheel Controls
Central Lubrication, One Shot Manual Type
Complete Coolant System
Removable Chip Pan
Tailstock (manual)
Quick Change Tool Post With 6 Holders
Swing Over Cross Slide 8.6"
Cross-Slide (X Travel) 8.6"
Longitudinal (Z Travel) 40"
Spindle Nose A2-5 ASA
Spindle Bore/Taper 1.970"
Spindle Speed Range (manual) 37.5-3000 RPM
Quill Travel 6.3"
Quill Taper Hole MT-4
Spindle Motor 8 HP
Monitor 9" CRT, Grey Scale, VGA
Program Input Conversational Menu Format
Operational Modes Manual (MDI) Teachm Run
Turning Cycles Roughing, Facing,Turning
Threading, Grooving
Help Screens Math/Geometry Help
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2006 Make - Ameri Seiki Model - VT-750 |
|---|
| FOR SALE: Ad # 8763 , Year = 2006 , Make = Ameri Seiki , Model = VT-750 |
|
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 24"
|
| Ad #
8763 |
| Year:
| 2006
|
| Make:
| Ameri Seiki
|
| Model:
| VT-750
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 20,000lbs
|
| Dimension: L x W x H | 137" x 70" x 138" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Chuck Size 24"
Max Swing 29.43"
Max Turning Length 25.59"
Max Turning Height 23.62"
Travels: X-Axis -1.96 -17.72"
Z-Axis 25.5"
Spindle: Speed 2,000 RPM
Motor 50 HP
Max Torque 3,001 ft-lbs
Turret: No. of Stations 10
Max Tool Diameter 1 1/4"
Equipped With:
Fanuc 0i-TC CNC Control
(6) Tool Holders Included
Power: 220v/ 3ph / 60Amp
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2005 Make - Akira-Seiki Model - SL15 |
|---|
| FOR SALE: Ad # 8760 , Year = 2005 , Make = Akira-Seiki , Model = SL15 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 5 Collet
|
| Ad #
8760 |
| Year:
| 2005
|
| Make:
| Akira-Seiki
|
| Model:
| SL15
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6,500lbs
|
| Dimension: L x W x H | 68" X 72" X 54" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Fanuc OTC Deluxe Control
Maximum Swing Over Bed 16"
Maximum Turning Diameter 9"
Maximum Travel in X Axis 5"
Maximum Turning Length
Headstock Spindle Motor Direct Drive/ HI Torqu
15HP
Spindle RPM 20-6,000
Collet/Nose Internal Taper A2-5
Bar Capacity 1.77"
Turret Number of Stations 10 Each
Turning Tool Size (Square Shank) 3/4"
Maximum Boring Bar Size 1"
Equipped With Hydraulic Power Unit
Automatic Lubrication System
Dhip Conveyor
Parts Catcher
IEMCA 12' Barfeeder
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 28 matching ads. Now displaying the remaining 28 ads.
| FOR SALE: Year - 2004 Make - MAKINO Model - A71 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8993 , Year = 2004 , Make = MAKINO , Model = A71 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: Travel s 28.7" x 28.7" x 31.5"
|
| Ad #
8993 |
| Year:
| 2004
|
| Make:
| MAKINO
|
| Model:
| A71
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 28,000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallet Size: 19.7" x 19.7"
Travel 28.7" x 28.7" x 31.5"
Spindle Center to Top of Pallet 3.1" x 31.9"
Spindle Nose to Center of Pallet 2"-33.5"
Spindle Drive Motor 25HP AC
Tools: 60ATC, Tool Change Time: 1.7 Seconds
Approximate Floor Space Required 121.5" x 192.4"
Bed Construction: One Piece Meehanite Casting
Table Rapid Traverse 1,968 IPM
Spindle Head Rapid Traverse 1,968IPM
Traveling Column Rapid Traverse 1,968IPM
360 Degree Pallet Table
Spindle Tool Shank Types: CAT50, Rigid Tap
Speed Range: 50-10,000RPM
Spindle Orientation Drive Motor Output 30HP AC
Chip and Coolant Rear Discharge, 1,000 PSI Throught the Spindle Coolant
Equipped With Fanuc 18I Control
Work Piece Was Gun
Renishaw MP700, 300 Additional Work Offsets
Helical Interpolation
GL3 High Speed Control System
Transformer
|
|
|
| FOR SALE: Year - 1995 Make - Okuma & Howa Model - 40H |
|---|
| FOR SALE: Ad # 8750 , Year = 1995 , Make = Okuma & Howa , Model = 40H |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 22" X 20" X 22"
|
| Ad #
8750 |
| Year:
| 1995
|
| Make:
| Okuma & Howa
|
| Model:
| 40H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 22,320lbs
|
| Dimension: L x W x H | 108" X 167.6" X 115.6" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 20"
Z Axis Travels 22"
Pallet Index 360,000 (full 4th)
Spindle Speed 35-10,000 RPM
Spindle Taper CAT 40
Tools 40
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rate 1,181 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 2.5 Seconds
Pallet Chagne Time (T-T/C-C) 1.5/4.6 seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Fanuc 18M CNC Control
Full 4th Axis
Tool Life Management
Graphic Display
14" CRT
251 PSI Coolant Thru Spindle
40 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor
|
|
|
| FOR SALE: Year - 1999 Make - Okuma Model - MX40HA |
|---|
| FOR SALE: Ad # 8754 , Year = 1999 , Make = Okuma , Model = MX40HA |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 22" X 24" X 22"
|
| Ad #
8754 |
| Year:
| 1999
|
| Make:
| Okuma
|
| Model:
| MX40HA
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallet Size (2) 15.75" x 15.75"
X Axis 22"
Y Axis 24"
Z Axis 22"
Spindle Speeds 7,000 RPM
Main Motor 20HP
Rapid Traverse Rate 1181 IPM
Tool Magazine Cap 60
Spindle Taper CAT40
Equipped With OSP-7000M
Coolant Thru Spindle
1 Degree Indexing
Chip Conveyor
All Available manuals
|
|
|
| FOR SALE: Year - 1983/4 Make - Mazak Model - H-12 HMC |
|---|
| FOR SALE: Ad # 8739 , Year = 1983/4 , Make = Mazak , Model = H-12 HMC |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 24" X 18" X 18"
|
| Ad #
8739 |
| Year:
| 1983/4
|
| Make:
| Mazak
|
| Model:
| H-12 HMC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mazatrol M1 Control
Pallet Size (2) 19.7" x 19.7"
Pallet Incex 5 Degrees
Cross Travel (X) 24"
Vertical Travel (Y) 18"
Longitudinal Travel (Z) 18"
Spindle Speeds 5000 RPM
Spindle Drive 10HP
Spindle Taper CAT 40
Tool Changer 30 Tool ATC
Spindle Drive Motor Fanuc
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1999 Make - Mori Seiki Model - MH-630 |
|---|
| FOR SALE: Ad # 8746 , Year = 1999 , Make = Mori Seiki , Model = MH-630 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 39" X 41" X 36"
|
| Ad #
8746 |
| Year:
| 1999
|
| Make:
| Mori Seiki
|
| Model:
| MH-630
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Pallet Size 24.7"x24.7"
Number of Pallets 2
Table Indexing Full 4th
Maximum Load On Table 3,300Lbs.
Spindle Spindle Speeds (RPM) 13,000
Spindle Taper 50
Main Motor (HP) 33.5 HP
Travels X Axis Travel 39.4"
Y Axis Travel 41.3"
X Axis Travel 36.2"
Tool Changer Tool Changer Positions 60ATC
Tool Change Time (Tool to Tool) 2.5 Seconds
Maximum Tool Weight 66Lbs.
Maximum Tool Length 19.7"
Equipped With Flood Coolant
Thru Spindle Coolant 300PSI
Chip Conveyor
Rigid Tapping
Tool Measure Probe
Boxed Way
2 Kurt Tombstones
2 Grit Pattern Tombstones
2 Base Plate Tombstones
Fanuc 18I
Voltage 220
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2004 Make - Okuma Flex Center Model - 30H |
|---|
| FOR SALE: Ad # 8753 , Year = 2004 , Make = Okuma Flex Center , Model = 30H |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 19" X 13" X 11"
|
| Ad #
8753 |
| Year:
| 2004
|
| Make:
| Okuma Flex Center
|
| Model:
| 30H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 11,023lbs
|
| Dimension: L x W x H | OSP-E-100M CNC Control |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- OSP-E-100M CNC Control
7.5 HP Spindle Motor
Two (2) 12.59" Square Pallets
1Ί Increment, 360 Position Pallet Index
19.68 X-Axis Travel
13.77" Y-Axis Travel
11.81" Z-Axis Travel
To 13000 RPM Spindle Speed
#30 Spindle Taper
24-Tool Position Tool Changer
2362 IPM Rapid Traverse Rates
48" x 189" x 97" High Approximate Machine Size
Equipped With Thru-the-Spindle Coolant
Rigid Tapping Cycles
Two (2) Tombstones
User Task 2
Tool Life Management
Cycle Time Reduction Function
Tooling Package
|
|
|
| FOR SALE: Year - 1996 Make - Mazak Model - FH-480 |
|---|
| FOR SALE: Ad # 8735 , Year = 1996 , Make = Mazak , Model = FH-480 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 22" X 22" X 20"
|
| Ad #
8735 |
| Year:
| 1996
|
| Make:
| Mazak
|
| Model:
| FH-480
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 23,220lbs
|
| Dimension: L x W x H | 125" X 167.6" X 108.6" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 22"
Z Axis Travels 20"
Pallet Index 1 Deg
Spindle Speed 35-12,000 RPM
Spindle Taper CAT 40
Tools 90
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rates 1,281 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 1.5 seconds
Palelt Change Time 5 Seconds
Tool Chagne Time (T-T/C-C) 1.5/84.6 Seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Mazatol M-Plus CNC Cotnrol
Auto Tool Length Measurement/Tool
Breakage Detection
Tool Life Management
Graphic Display
14" CRT
250 PSI Coolant Thru Spindle
90 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor
|
|
|
| FOR SALE: Year - 2001 Make - Hitachi-Seiki Model - MS-400H |
|---|
| FOR SALE: Ad # 8723 , Year = 2001 , Make = Hitachi-Seiki , Model = MS-400H |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 22" X 20" X 22"
|
| Ad #
8723 |
| Year:
| 2001
|
| Make:
| Hitachi-Seiki
|
| Model:
| MS-400H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 22,320lbs
|
| Dimension: L x W x H | 96" x 167.6" x 108.6" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 20"
Z Axis Travels 22"
Pallet Index 1 Degree
Spindle Speed 35-10,000 RPM
Spindle Taper CAT 40
Tools 30
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rates 1,575 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 1.5 Seconds
Pallet Change Time 5 Seconds
Tool Change Time (T-T/C-C) 1.0/3.6 seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Fanuc 21IM Siecos CNC Control
Tool Breakage Detection
Tool Life Management
Graphic Display
14" LCD
1000 PSI Chip Blaster Coolant Thru Spindle
30 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor-Concept 1000 Dual Belt System
|
|
|
| FOR SALE: Year - 1994 Make - KIA Model - KH40A |
|---|
| FOR SALE: Ad # 8726 , Year = 1994 , Make = KIA , Model = KH40A |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 21" X 19" X 19"
|
| Ad #
8726 |
| Year:
| 1994
|
| Make:
| KIA
|
| Model:
| KH40A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 14,300lbs
|
| Dimension: L x W x H | 146" X 100" X 106" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Specifications Travel X 21.65"
Travel Y 19"
Travel Z 19"
Pallet Dimension 15.7" x 15.7"
Minimum Indexing Degree 1 Degree (std.)
Maximum Pallet Load 880 lbs.
Spindle Taper BT40
High 1060 - 6000 RPM
Spindle 10 HP
Axis Motor 1.5 HP
Capacity 50
Tool Shank BT40
Tool Call System Random/Bi-Directional
Equipped With Fanuc 15M CNC Controls
48 Work Offsets
200 Tool Offsets
Extended Memory 64M
Spindle Cooling System (+ - 4 deg. F)
Flood Coolant System and Standard Coolant Tank
Internal Spiral Chip Conveyor
Full Enclosure Work Light
APC Pallet Tables 16" x 16"
Warning Light Leveling Pads
Automatic Lubrication
Manuals & Electric Diagram
|
|
|
| FOR SALE: Year - 1998 Make - DAEWOO Model - ACE H-80 |
|---|
| FOR SALE: Ad # 8715 , Year = 1998 , Make = DAEWOO , Model = ACE H-80 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 49" X 39" X 39"
|
| Ad #
8715 |
| Year:
| 1998
|
| Make:
| DAEWOO
|
| Model:
| ACE H-80
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Fanuc 16MC CNC w/Color CRT Control
25/20 HP Spindle Motor
20-4500 RPM Geared Head Spindle Speed
ANSI (CAT) #50 Spindle Nose
Two (2) 31.5" Square Pallets
1Ί Increment, 360 Position Pallet Indexing
49.3" X-Axis Travel
39.4" Y-Axis Travel
39.4" Z-Axis Travel
60-Tool Capacity Automatic Tool Changer
Thru-the-Spindle Coolant System
Three (3) Chip Conveyors
Assorted Tool Holders as Available
Geared Head, Box Way Construction
472 IPM Rapid Traverse Rates all Axes
|
|
|
| FOR SALE: Year - 1997 Make - Hitachi-Seiki Model - HG-400 |
|---|
| FOR SALE: Ad # 8720 , Year = 1997 , Make = Hitachi-Seiki , Model = HG-400 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 22" X 23" X 20"
|
| Ad #
8720 |
| Year:
| 1997
|
| Make:
| Hitachi-Seiki
|
| Model:
| HG-400
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallets 16"
Travels 22" x 23" x 20"
30 Tools
12,000 RPM
NT 40 Taper
Fanuc 15M- B Control
15 HP
Through Spindle Coolant
Chip Conveyor
Rigid Tapping
|
|
|
| FOR SALE: Year - 2004 Make - DMU Deckel Model - Maho 100P |
|---|
| FOR SALE: Ad # 8718 , Year = 2004 , Make = DMU Deckel , Model = Maho 100P |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 39" X 39" X 39"
|
| Ad #
8718 |
| Year:
| 2004
|
| Make:
| DMU Deckel
|
| Model:
| Maho 100P
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 17000Kg
|
| Dimension: L x W x H | 3.4m x 1.5m x 3.10m |
Machine Location:
|
| City: |
On Request
|
| State: |
Mid West
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 40 Taper With 40 Pockets
18000 RPM Spindle
Spindle HP 100%=25
Spindle HP 50%=37
X Travels 1,000 mm (39.37")
Y Travels 1,000 mm (39.37")
Z Travels 1,000 mm (39.37")
Work Table
Clamping Surface mm 100 x 910
Number of T Groves/Size pce 9/18
Center Bore mm 50
Max Torque of table plate at 100% ED Nm 3,4000
Max Torque of Table plate at 40% ED Nm 4,900
Mac Table Top Speed U/min 30
Feed Degree/min 10,900
Resolution of measuring Degree 0,0001
Max Load capacity KG 2,000
spindle hrs: 5500
|
|
|
| FOR SALE: Year - 1995 Make - Milltronics Partner Model - 1F |
|---|
| FOR SALE: Ad # 8685 , Year = 1995 , Make = Milltronics Partner , Model = 1F |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 30" X 16" X 20"
|
| Ad #
8685 |
| Year:
| 1995
|
| Make:
| Milltronics Partner
|
| Model:
| 1F
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Travels 30" x 16" x 20"
12 Tools
10,000 RPM
CT 40
Centurion V Control
7.5 HP High Torque Spindle
Color Graphics
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2003 Make - YCI Model - Rebel-3 |
|---|
| FOR SALE: Ad # 8678 , Year = 2003 , Make = YCI , Model = Rebel-3 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 40" X 17" X 24"
|
| Ad #
8678 |
| Year:
| 2003
|
| Make:
| YCI
|
| Model:
| Rebel-3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 10,120lbs
|
| Dimension: L x W x H | 94.5 x 111 x 117 |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Headstock
Spindle Speed 8000 RPM
Spindle Drive Direct Drive
Horsepower 15 HP
Distance between spindle & table top 4.7 29.5
Spindle Center to Z-axis Way Cover 20"
Table
Size 37.4 x 15.7
T-Slots 0.71 x 3 x 4.95
Maximum Load 1,100 lbs
ATC System
Taper CAT 40
Selection Bi- Directional
Max. Tool Weight 13.2 LBS
Max. Tool Length 12"
Max. Tool Dia. 3.15"
ATC Changer Capacity 20
Travels .
40" X 17" X 24"
Includes
Complete Fixture Set Up to Run 24" Wheel With Sub Plate & Chuck
8,000 RPM MAXIMUM SPINDLE SPEED
HARDENED & GROUND BOX WAYS
AC DIGITAL SERVO & SPINDLE DRIVES
8.4 COLOR LCD MONITOR
PCMCIA SLOT FOR MEMORY EXPANSION & MODEM
FULL ALPHANUMERIC KEYBOARD
RIGID TAPPING AND HELICAL INTERPOLATION
640 METERS CONTROL MEMEORY
CUSTOM MACRO B
TOOL PATH GRAPHICS
TURCITE-B COATED SLIDE WAYS
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1998 Make - Mazak Model - FJV-250 |
|---|
| FOR SALE: Ad # 8679 , Year = 1998 , Make = Mazak , Model = FJV-250 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 40" X 20" X 18"
|
| Ad #
8679 |
| Year:
| 1998
|
| Make:
| Mazak
|
| Model:
| FJV-250
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Auto Pallets Changer (2)
Table Size (2) x 47" x 21.5"
Max Table Weight 1764 Lbs.
Travels X Axis 40.16"
Y Axis 20.08"
Z Axis 18.11"
Spindle Speed 12,000 RPM
Motor 30HP
Taper CAT 40
Tool Changer 40 ATC
Equipped With Mazatrol Pc- Fusion 640M Controls
High Pressure Thru Spindle Coolant to 213 PSI
Monitoring System B Probe Setup
Mayfran Chip Conveyor
EIA/ ISO 3D High Speed Software
Mist Collector
Multi Tap Transformer
Pallets (2)
Sub Plates (2)
|
|
|
| FOR SALE: Year - 2001 Make - Masco Model - Bridgemax |
|---|
| FOR SALE: Ad # 8670 , Year = 2001 , Make = Masco , Model = Bridgemax |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 185" X 100" X 50"
|
| Ad #
8670 |
| Year:
| 2001
|
| Make:
| Masco
|
| Model:
| Bridgemax
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 110,000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pallet Working Surface 72" x 120"
Table Load Capacity 22,000Lbs
Longitudinal Travel (X-Axis) 185"
Cross Travel (Y-Axis) 100"
Vertical Travel (Z-Axis) 50"
Spindle Nose to Table 10"-60"
Distance Between Columns 110"
Rapid Traverse Rate ( X & Y-Axis) 800 IPM
Rapid Traverse Rate (Z-Axis) 400 IPM
Tool Storage Capacity (28 Vertical, 24 Horizontal)
52
Spindle Horsepower 35 HP
Spindle Speeds Low Range 5-1000 RPM
Spindle Speed High Range 750-3750 RPM
Spindle Taper #50 CAT
Electrics 460/3/60
Approximate Machine Dimensions 48'3" x 28'2"
Approximate Machine Geight Max
Equipped With Fanuc 16i CNC Control
RS-232 Port
Multiple Part Program Storage
Self Diagnostics
Automatic Pallet Changer with (2) 72" x 120"
Pallets
Heavy Duty Geared Spindle with CAT-50 Taper
Automatic Head Changer with Right Angle Head
C-Axis Head Rotation for 5 Sided Machining
28 Station Automatic Tool Changer that Services
the Horizontal Right Angle Head
Heavy Duty Bridge Style Design
2 Range Geared Spindle
Manual Pulse Generator
Axis Error Compensation
Cutter Compensation
Full Enclosure
Thru Spindle Coolant System and Chip Conveyor
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1984 Make - Mori Seiki Model - MV-45/40 APC |
|---|
| FOR SALE: Ad # 8695 , Year = 1984 , Make = Mori Seiki , Model = MV-45/40 APC |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 30" X 17.7" X 19.7"
|
| Ad #
8695 |
| Year:
| 1984
|
| Make:
| Mori Seiki
|
| Model:
| MV-45/40 APC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Fanuc 11M Control
Automatic Pallet Shuttle with (2) pallets
Travels: 30" x 17.7" x 19.7"
Table Size: 43.3" x 17.7"
6000 RPM Geared Head
7.5 HP
Cat-40
20 ATC
Chip Conveyor
Spindle Orientation- Electric Control
Expanded Bubble Memory
Flood Coolant
Full Enclosure
208 Volt
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1990 Make - Mazak Model - AJV-35/60 |
|---|
| FOR SALE: Ad # 8677 , Year = 1990 , Make = Mazak , Model = AJV-35/60 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 50" X 31" X 20"
|
| Ad #
8677 |
| Year:
| 1990
|
| Make:
| Mazak
|
| Model:
| AJV-35/60
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 24,200lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table Size 29.52" x 68.50"
Table Load Capacity 5510 lbs
X Axis Travels 59.05"
Y Axis Travels 31.49"
Z Axis Travels 20"
Distance from Spindle Nose to Table Top 7.87 ~
27.87
Distance between Columns / Allowable Distance
between Col. 34.64 / 33.85
Rapid Traverse Rates X,Y / Z Axis 945 / 709 IPM
Cutting Feedrate 0.04 ~ 196.8ipm
Main Drive Motor 30 HP
Spindle Speeds 10,000 RPM
Spindle Taper CAT 50
Tool Selection 30 Tools
Max. Tool Weight / Max. Tool Length 33lb/11.81"
Equipped With Mazatrol M-32 Control
Coolant System
Work Light
Chiller Unit
Tool Life Monitoring
Adaptive Feedrate Control
Chip Conveyor
Coolant System
Splash Guard
Adjusting Tools
Auto Tool Length
Tool Breakage Detection
2-Pallet Changer
|
|
|
| FOR SALE: Year - 1989 Make - Matsuura Model - MC-600-V |
|---|
| FOR SALE: Ad # 8671 , Year = 1989 , Make = Matsuura , Model = MC-600-V |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 23" X 16" X 18"
|
| Ad #
8671 |
| Year:
| 1989
|
| Make:
| Matsuura
|
| Model:
| MC-600-V
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Table Size 15.7" x 15.7"
Max Table Load 880 Lbs
Travels: X-Axis 23.62"
Y-Axis 16.14"
Z-Axis 18.5"
Spindle: Speeds 7,000 RPM
Taper #40
Motor 10 Hp
ATC: No. Of Positions 20 Tools
Equipped With:
Yasnac Control
Full Enclosure
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2003 Make - Mori Seiki Model - NV-5000A/50 |
|---|
| FOR SALE: Ad # 8698 , Year = 2003 , Make = Mori Seiki , Model = NV-5000A/50 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 31" X 20" X 29"
|
| Ad #
8698 |
| Year:
| 2003
|
| Make:
| Mori Seiki
|
| Model:
| NV-5000A/50
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Control MSG-501MB
Table 43.3"x23.6"
Table Load Capacity 2,200 Lbs
X-Axis Travel 31.5"
Y-Axis Travel 20.1"
Z-Axis Travel 29.1"
Spindle Taper CAT 50
Spindle Speeds 8000RPM
Spindle Motor 30/24.7 HP Big Plus
Number of Tool Positions 30ATC
Equipped With High Pressure Coolant, ChipblasterJ8
Including Dual Stainless Steel Filters and Filter
Magnetic Conveyor System High Column 200mm Riser
Nikken 4AX-2MT-225 Table, Tool Life Management
Additional Coordinate Offsets 48,
Contact Type Senson (Table), Shower Coolant
Direct Scale Feedback, Big Plus Spindle
|
|
|
| FOR SALE: Year - 1999 Make - Kitamura Model - Mycenter 3X |
|---|
| FOR SALE: Ad # 8664 , Year = 1999 , Make = Kitamura , Model = Mycenter 3X |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 32" X 18" X 22"
|
| Ad #
8664 |
| Year:
| 1999
|
| Make:
| Kitamura
|
| Model:
| Mycenter 3X
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 21,500lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Table Size 40" x 20"
X Axis Travel 32"
Y Axis Travel 18"
Z Axis Travel 22"
Rapid Traverse Rates 1181 IPM
Cutting Feedrates 595 IPM
Spindle Taper CAT 50
ATC Capacity 30 Tools
Max Tool Size 4.92"/7.48"
Spindle Motor 20 HP
Equipped With Automatic Pallet Changer
Fanuc OM Control
Throught Spindle Coolant
Chip Conveyor
Geared Headstock-High Torque Design
Transformer
30 ATC
RS 232
Full Enclosure
CAT 50 Toolholders Included
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2000 Make - Kitamura Model - Mycenter 2XISP |
|---|
| FOR SALE: Ad # 8663 , Year = 2000 , Make = Kitamura , Model = Mycenter 2XISP |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 20" X 14" X 18"
|
| Ad #
8663 |
| Year:
| 2000
|
| Make:
| Kitamura
|
| Model:
| Mycenter 2XISP
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 9,700lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table Table Size 14 x 30.9
T-Slot (width x quantity) 0.55"
Table Load Capacity 529 lbs
Travel X Axis 20"
Y Axis 14"
Z Axis 18"
Distance from table surface to spindle nose 6.3" x
24.4"
Spindle Spindle Taper # 40
Spindle Motor 15
Max Spindle Torque for real cutting 134.2
Variable steps speed Auto 2 Steps Gear
Feed Rapid feed (X,Y Axis) 1969 IPM
Rapid Feed ( Z Axis) 1,417 IPM
Cutting Feed 0.04-1417 IPM
ATC Tool Storage Capacity 24
Tool Selection Method Random Tool Identified at
Magazine
RPM 15,000
Max Tool Diameter 3.1"
(In case adjacent tool pots are empty) 4.9"
Max Tool Length 11.8"
Max Tool Weight (With tool holder) 17.6 lbs
Tool Change Time (tool to tool) 1.2 sec
(chip to chip) 3.2 sec
Dimensions Floor Space (W x L) 93.7" x 81.5"
Machine Height 111.2"
Flash Card Memory
2 Pallet Spark Changer
Fanuc 16iM Control
220 Volts
Spindle Hours 2372
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1998 Make - Kitamura Model - Mycenter 1 |
|---|
| FOR SALE: Ad # 8662 , Year = 1998 , Make = Kitamura , Model = Mycenter 1 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 20" X 14" X 16"
|
| Ad #
8662 |
| Year:
| 1998
|
| Make:
| Kitamura
|
| Model:
| Mycenter 1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Travels: X Axis 20"
Y Axis 14"
Z Axis 16"
Spindle: Motor 7.5 HP
Speed 15,000
Taper BT 35
Number of Tools (Sidemount) 24 Position
Equipped With:
Yasnac i80 CNC Control / CRT
Automatic Pallet Changer
Expanded Memory
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2001 Make - HH Roberts Model - TW-31-Q CNC |
|---|
| FOR SALE: Ad # 8659 , Year = 2001 , Make = HH Roberts , Model = TW-31-Q CNC |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 32" X 20" X 22"
|
| Ad #
8659 |
| Year:
| 2001
|
| Make:
| HH Roberts
|
| Model:
| TW-31-Q CNC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4,850lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Anilam 3300MK Control
CAT 40
13 HP
32" x 20" x 22" Travel
230 Volts
Table 42" x 13"
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2002 Make - Johnsford Model - SV-32 APC |
|---|
| FOR SALE: Ad # 8661 , Year = 2002 , Make = Johnsford , Model = SV-32 APC |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 31" X 20" X 24"
|
| Ad #
8661 |
| Year:
| 2002
|
| Make:
| Johnsford
|
| Model:
| SV-32 APC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 12,000lbs
|
| Dimension: L x W x H | 92" x 85" x 100" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Two Pallet Changing VMC
Travel 31" x 20" x 24"
Pallets 33" x 18"
15 HP
2 Speed Gear Box
8000 RPM
40 Taper
40 ATC
Control Fanuc 18M
Hours 2100
Floor Space 92" x 85" x 100"
Volts 208/220
Pallet Load 750 Lbs.
Equipped With Screw Type Chip Conveyor
Rigid Tap
Romote Joy
Approximate Spindle Hours 2400
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2007 Make - FADAL Model - VMC 6535 |
|---|
| FOR SALE: Ad # 8641 , Year = 2007 , Make = FADAL , Model = VMC 6535 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 65" X 35" X 34"
|
| Ad #
8641 |
| Year:
| 2007
|
| Make:
| FADAL
|
| Model:
| VMC 6535
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Mississippi
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- One (1) 2007 FADAL VMC-6535
MACHINING CENTER, VERTICAL, CNC - 4 AXIS
Fanuc18i-MB5
Table Size 75" x 35"
Travels:X-Axis 65"
Y-Axis 35"
Z-Axis 34"
Spindle:Speed 10,000 RPM (VHT Spindle)
Main Motor HP / Torque 29.8 HP / 209 ft-lbs
Taper CAT40
Rapids:X, Y / Z 900 / 700 IPM
Cutting Feed Rates X, Y Z 600 IPM
ATC:No of Tools 24 (Side Mount)
Tool Change Time 1.9 SEC DATC
Equipped With: .................................................................................................................
Fanuc 18i-MB5 Control
10,000 Very High Torque Air / Oil Spindle (30HP)
Spindle Thru Coolant (300 PSI)
Data Server (Incl. High Speed Ethernet)
2560 Meter Memory 900K
Renishaw Tool Setter Probe (Model TS-27R)
4th Axis Rotary Table
Hours:Power On - 1132 hours, 27 minutes
Operating Time 245 hours, 36 minutes
Cutting Time 280 hours, 32 minutes.
|
|
|
| FOR SALE: Year - 1996 Make - FADAL Model - 5020 |
|---|
| FOR SALE: Ad # 8638 , Year = 1996 , Make = FADAL , Model = 5020 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 50" X 20" X 28
|
| Ad #
8638 |
| Year:
| 1996
|
| Make:
| FADAL
|
| Model:
| 5020
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 11,250lbs
|
| Dimension: L x W x H | 146" x 103" x 128" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table 58" x 20"
Max Table Load 3000 lbs
Spindle Nose to Table Top 4" to 35"
X Axis Travel 50"
Y Axis Travel 20"
Z Axis Travel 28"
Rapid Travel 400 IPM
Spindle Taper 40
Spindle Speeds 8000 RPM
Spindle Motor 15 HP
Tool Changer Capacity Stations 21
Max Tool Weight 15 lbs
Equipped With 88 HS Control
4th Axis Pre Wire
422K Extended Memory
Box Ways
High Speed CPU
RS 232 Port
Rigid Tapping
|
|
|
| FOR SALE: Year - 2005 Make - AMERA-SEIKI Model - A-3 VMC |
|---|
| FOR SALE: Ad # 8610 , Year = 2005 , Make = AMERA-SEIKI , Model = A-3 VMC |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity:
|
| Ad #
8610 |
| Year:
| 2005
|
| Make:
| AMERA-SEIKI
|
| Model:
| A-3 VMC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Fanuc 0iMB CNC control
43 X-axis travel
22 Y-axis travel
22 Z-axis travel
20 HP (max rating) Fanuc AC spindle motor
12,000 rpm spindle speed
1417 ipm rapid traverse
24+1 tool capacity
Double arm, side mount tool changer
CT-40 taper
320 meters memory
8.4 color LCD screen
Full cover guarding including top cover
Coolant thru spindle, 350 psi
Flood coolant system
Rigid tapping
Spindle oil chiller
Automatic lubrication system
Filtration system for coolant thru spindle
Pre-wired for 4th axis
Remote manual pulse generator
Built-in work light
Cycle stop alarm light
Double doors with safety interlock
Auger type chip conveyor
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| FOR SALE: Year - 1984 Make - Cincinnati Model - 500-12 |
|---|
| FOR SALE: Ad # 8885 , Year = 1984 , Make = Cincinnati , Model = 500-12 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 1/2" Mild Steel
|
| Ad #
8885 |
| Year:
| 1984
|
| Make:
| Cincinnati
|
| Model:
| 500-12
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity, Mild Steel 1/2"
Stainless Steel 3/8"
Length 12'
Motor 25HP
Equipped With Cincinnati Conveyor
Seperator
Stacker
|
|
|
| FOR SALE: Year - 1969 Make - Cincinnati Model - 2512 |
|---|
| FOR SALE: Ad # 8884 , Year = 1969 , Make = Cincinnati , Model = 2512 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 3/8" Mild Steel
|
| Ad #
8884 |
| Year:
| 1969
|
| Make:
| Cincinnati
|
| Model:
| 2512
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 33,100lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity: Material Thickness 3/8" Mild Steel
Throat Depth 18"
Length Between Housings 12' 3"
Horse Power of Motor 60 HP
Strokes Per Minute 50 SPM
Flywheel RPM 1,000 RPM
Front Gauge Range 60.5"
Back Gauge Range 36"
Holdowns to Knife Edge 7/8"
Total Holdown Pressure (Tons) 12 Tons
Shear Angle Taper Per Foot 5/16"
Ram Adjustment 11/16"
Size Four Edge Knives 1" x 4" x 136"
Length of Knives 12' 4"
Equipped With:
48" Front Operated Power Back Gauge
Conveyor Stacker
13 Oversized Holdown Plungers
Electric Air Disc Clutch
12' Squaring Arm
Power: 460V / 3PH / 60 Htz
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1986 Make - Wysong Model - 1052 Power S |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8889 , Year = 1986 , Make = Wysong , Model = 1052 Power S |
|
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 10" gauge mild steel
|
| Ad #
8889 |
| Year:
| 1986
|
| Make:
| Wysong
|
| Model:
| 1052 Power S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Cutting Length 52"
Capacity (Mild Steel) 10 Gauge Rake of Upper Blade 3/8" Per Foot
Number of Hold Downs 60SPM
Motor Specifications 5HP 208/230/460 3/60
Equipped With PC-1000 CNC Shear Control
24" Front Operated Power Back Gauge
Wysong Pneumatic Sheet Support System
8' Squaring Arm
(2) 24" Front Support Arms
Push Button Controls for Forward/Reverse/Jog
Enclosed Gears Running in Oil
Gear and Belt Covers
Electric Foot Switch
Flush Floor Design
Machined Hand Slots
Electrical Controls
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1978 Make - HTC Model - U25-10 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8887 , Year = 1978 , Make = HTC , Model = U25-10 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 1/4" x 10' Mild Steel
|
| Ad #
8887 |
| Year:
| 1978
|
| Make:
| HTC
|
| Model:
| U25-10
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 10,000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity 1/4" x 10' Mild Steel
Cutting Length 148"
Rake of Upper Blade 3/8" per Foot
Back Gauge Range 36"
Electrics Wired 220V/3PH
Motor 10HP/ 1,740 RPM
Strokes Per Minute 22
Equipped With 6' Squaring Arm
36" Front Operated Power Back Gauge with Readout
Three Front Sheet Supports
Work Light
Hydraulic Hold Downs
Foot Pedal
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1980's Make - Pearson Model - 1018TX |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8888 , Year = 1980's , Make = Pearson , Model = 1018TX |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 12 Gauge x 10' capacity
|
| Ad #
8888 |
| Year:
| 1980's
|
| Make:
| Pearson
|
| Model:
| 1018TX
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 8,500lbs
|
| Dimension: L x W x H | 153"LR x 061"FB x 069"HT |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Rated capacity 12GA x 10'
Rated Capacity Stainless 12 GA
Swing Beam Design
Low Profile Machine
All Steel Frame
Strokes Per Min 25
Adjusta Stroke Control
Hydraulic Holdowns 11
Equipped With:
39" Squaring Arm
2 Front Support Arms
30" front Opperated Power Back Gauge
7 1/2 HP 220/440 Volts 3 Phase
With Remote Foot Treadle
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1970's Make - Wysong Model - 12101 |
|---|
| FOR SALE: Ad # 8890 , Year = 1970's , Make = Wysong , Model = 12101 |
|
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 12 Gauge Mild Steel
|
| Ad #
8890 |
| Year:
| 1970's
|
| Make:
| Wysong
|
| Model:
| 12101
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 11,150lbs
|
| Dimension: L x W x H | 168" x 90" x 53" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity 12 Gauge Mild Steel
14 Guage Stainless Steel
Cutting Length 120"
Rake of Upper Blade 3/8"
Number of Hold-Down Feet 16
Hold-Down Feet Centers 5"-10"
Front Gauge Range 36"
Motor5HP/ 1,800 RPM
Strokes per Minute 60 SPM
Dimensions (L x W x H) w/o Gauges 168" x 55" x
53"
Equipped With T-Slot Across Bed Front
24" Rear Operated Manual Back Gauge
6' Squaring Arm and 3 Front Sheet Supports
One Shot Lube
Metal Finger Guard
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
| FOR SALE: Year - 1982 Make - Urisviken Model - |
|---|
| FOR SALE: Ad # 8883 , Year = 1982 , Make = Urisviken , Model = |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 200 Tons
|
| Ad #
8883 |
| Year:
| 1982
|
| Make:
| Urisviken
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 22,930lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity 200 Tons
Overall Length of Bed and Ram 12' 1 5/8"
Distance Between Housings 124"
Stroke 10"
Open Height 19 5/8"
Throat Depth 7 3/4"
Table Width 7 3/4"
Speeds Fast Approach 78" / Minute
Form 27 " / Minute
Creep Form 2.6" / Minute
Return 75" / Minute
Distance From Floor to Top of Table 31 1/2"
Main Motor 30HP 460/230/3/60
Equipped With Pedestal Palm Button Station
Bolt on Angle Brackets
Vickers Hydraulic Pump
Variable Speed Ram
Variable Tonnage
Bed Face Machined with Dovetail Slots
New Valves, Rebuild Hydraulic Cylinders in Jan
2008
Electrics 460/3/60
Voltage 220/440
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1998 Make - Trumpf Model - OBL 12 |
|---|
| FOR SALE: Ad # 8882 , Year = 1998 , Make = Trumpf , Model = OBL 12 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 257 Tons
|
| Ad #
8882 |
| Year:
| 1998
|
| Make:
| Trumpf
|
| Model:
| OBL 12
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 53,900lbs
|
| Dimension: L x W x H | 183" X 91" X 122" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Tonnage Capacity 257 Ton
Overall Length of Bed and Ram 127"
Distance Between Housings 106"
Stroke 17.5"
Open Height 24.2"
Throat Depth 16.5"
Travel In X Axis 23.5"
Travel in R Axis 9.8"
Operating Speed in Y Axis 2-24 SPM
Drive Motor 25 HP
Equipped With Delem Graphic-Intereactive CNC
Control
(6) Axis Back-Gauge (Z1,Z2,R1,R2,X1,X2)
Programmable CNC Crowning
Safety Light Curtains
Electronic Foot Controls
Voltage 230/460
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1965 Make - Pacific Model - 400-14 |
|---|
| FOR SALE: Ad # 8880 , Year = 1965 , Make = Pacific , Model = 400-14 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 400 Tons
|
| Ad #
8880 |
| Year:
| 1965
|
| Make:
| Pacific
|
| Model:
| 400-14
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 174" X 90" X 126" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Bending Capacity 14' x 3/8" Mild Steel
10'x 1/2" Mild Steel
7' x 5/8" Mild Steel
Tonnage Capacity 400 Tons
Overall Length of Bed and Ram 14'
Distance Between Housings 12'4.5"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat Depth 10"
Width of Bed 10"
Floor to Top of Bed 32"
Speeds Approximate 140"/Min. Advance
65"/Min. Press
131"/Min. Return
Equipped With 24" Hurco "Autobend 7" 2-Post
Programmable Back Gauge
Vertical Adjustment
Stroke Length, Tilt Adjustment, Tonnage Control
Micrometer Depth Stop
Pushbuttons for Start-Stop
Selector Switch for Inch-Run
Ram Machined for Angles-Front/Back
Sectional Ram Die Clamps
Vickers Hydraulic Pump
Driven by 40 HP 1770 rpm
34" Pit Required
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2000 Make - Mitsu Toyokoki Model - APB 5613W |
|---|
| FOR SALE: Ad # 8871 , Year = 2000 , Make = Mitsu Toyokoki , Model = APB 5613W |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 56 Tons
|
| Ad #
8871 |
| Year:
| 2000
|
| Make:
| Mitsu Toyokoki
|
| Model:
| APB 5613W
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 7,500lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Capacity 56 Ton
Bending Length 51.18"
Stroke Length 3.94"
Down Stroke Speed .003-2.64" / Sec
Bending Speed 0.0008 ~ 0.79 in/sec
Up Stroke Speed 2.64 in/sec
Main Motor AC Servo Motor 8 x 2 hp
Backguage Motor Ac Servo Motor 0.86 hp
Ram Repetition Accuracy 0.00004 in
Backgauge Repetition Accuracy 0.0004 in
Backgauge Speed 1181 in/min
Backgauge Stroke 19.69 in
Backgauge up/down Stroke 3.94 in
|
|
|
| FOR SALE: Year - 1977 Make - Pacific Model - K350-22 |
|---|
| FOR SALE: Ad # 8876 , Year = 1977 , Make = Pacific , Model = K350-22 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 350 Tons
|
| Ad #
8876 |
| Year:
| 1977
|
| Make:
| Pacific
|
| Model:
| K350-22
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 65,000lbs
|
| Dimension: L x W x H | 22" x 70" x 118" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Hydraulic Press Brake (Gauge)
Tonnage 350
Bending Length 22'
Distance Between Hoursings 20'-5"
Stroke 12"
Throat Depth 16"
Open Height 20"
Closed Height 8"
3 Speed RAM
Motor 30HP
Pit for Bed 49"
Equipped With 4 Way Die Set
Tonnage Indicator
Electric Foot Switch
Voltage 460
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2007 Make - Accurpress Accel Model - 515012 |
|---|
| FOR SALE: Ad # 8860 , Year = 2007 , Make = Accurpress Accel , Model = 515012 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 150 Tons
|
| Ad #
8860 |
| Year:
| 2007
|
| Make:
| Accurpress Accel
|
| Model:
| 515012
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 29,000lbs
|
| Dimension: L x W x H | 161"L-R x 78"F-B x 100"H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Tonnage 150 Tons
Length of Bed 144"
Distance Between Frames 130"
Bed Height 34"
Length of Ram Stroke 10"
Ram Open Height 26"
Throat Depth 8"
Ram Closed Height 16"
Approach Speed 480
Bend Speed 24-48
Return Speed 320
Motor 20HP
Approximate Dimensions 161"L-R x 78"F-B x 100"H
Equipped With ETS3000 Supreme Backguage
12.1' TFT Active Matrix Screen Graphical Display
Bend Simulation with Interference and Tool Overload Checking
3000 Programs- 50 Steps Each Program
Off Line Programming and Program Storage Via: RS323 Link or 3.5 Diskette
Premium Servo Controlled CNC Backgauge
6 Axis: Y1/Y2, X, R, & Z1/Z2,
Optional R and Z1/Z2 Axis Offer Productivity Boost
Wila NSCL II New Standard Clamping
Lazer Safe Safety Guarding
Front Sheet Support Fixtures
Standard Ram Open Height is 18"
Increased by 8" for total of 26"
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2000 Make - Accurpress Model - 710010 |
|---|
| FOR SALE: Ad # 8856 , Year = 2000 , Make = Accurpress , Model = 710010 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 100 Tons
|
| Ad #
8856 |
| Year:
| 2000
|
| Make:
| Accurpress
|
| Model:
| 710010
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 15,000lbs
|
| Dimension: L x W x H | 112"L x 47"W x 82"H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Capacity 100 Tons
Overall Length of Bed and Ram 10"
Distance Between Frames 100"
Stroke 8"
Throat Depth 10"
Open Height 14"
Closed Height 6"
Speeds
Fast Approach 115IPM
Slow Bend 24 IPM
Fast Return 260 IPM
Approximate Cycles Per Minute (F.S.) 15
Back Gauge Range 24"
Bed Height 34"
Bed Width 3.5"
Main Motor 10HP
Equipped With Accurpress ETS 3000 Control System with Premium CNC Backgauge
5 Axis Premium CNC Gauging, Y, X, R, Z1, Z2 Axis
Adjustable Bend Speed Control
Complete Set of Upper Punch Holders
Bottom Filler Block
Electric Foot Switch,
Pedestal Dual Palm Controls
Complete Electrical Controls
Includes all Available Manuals and Accessories
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1989 Make - Accurpress Model - 713010 |
|---|
| FOR SALE: Ad # 8861 , Year = 1989 , Make = Accurpress , Model = 713010 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 130 tons
|
| Ad #
8861 |
| Year:
| 1989
|
| Make:
| Accurpress
|
| Model:
| 713010
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 20,000lbs
|
| Dimension: L x W x H | 140"L-R x 70"F-Bx 95" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity 130 Ton
Overall Length of Bed and Ram 10'
Distance Between Housings 8'4"
Stroke 8" (Maximum)
Open Height 18"
Closed Height 10"
Throat Depth 10"
Bed Height 34"
Speeds 60 IPM - Fast Approach; 16 IPM- Bend
140 IPM-Fast Return
Equipped With Flush Floor Design
Machined Ram for Removable Angles
Upper and Lower Die Holder
Stroke Length Control
Disconnect Switch
Manual Back Gauges
Complete Electrical Controls
Includes All Available Manuals and Standard
Equipment
|
| Electrical Description |
|
|
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| FOR SALE: Year - 1998 Make - Finn-Power Model - A520 |
|---|
| FOR SALE: Ad # 8940 , Year = 1998 , Make = Finn-Power , Model = A520 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: Capacity 23 Ton
|
| Ad #
8940 |
| Year:
| 1998
|
| Make:
| Finn-Power
|
| Model:
| A520
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 23 Tons Hydraulic Punching Force
Programmable Adjustable Punch Stroke (Allowing
Use:) Louver and Emboss Tooling
Programmable Ram Speed
Turret Rotation 30 RPM
Tool Change Time 1 to 2.5 Seconds Max
Punching Speed 320 Hits Per Minute at 1" Centers
Punching Accuracy 0.004"Punching
0.002" Repeatability
Turret Layout 21 Stations
Seven Stations (2 Auto Index; 2 MT8 &MT20; 3
Fixed) 3 1/2"
One Station 2"
Two Auto-Index 1 1/4"
11 Fixed Single Stations (0, 90 and 45 Degrees) 1
1/4"
Maximum Punch Diameter 3.5'"
Maximum Material Thickness 5/16"
Maximum Sheet Weight 440 Lbs.
Sheet Clamping 2 Pneumatic Clamps
Maximum Sheet Size 100" x 50"
X Travel 82"
Y Travel 51"
Control Siemens Sinunerik 840D
RS 232 C Interface
Rapid Feed Rates X Axis 3,456 IPM
Y Axis 2,352IPM
Combined Maximum Traverse Speed 4,164 IPM
Machine Space Required for System Installation
18'x 18's 8.5'
Approximately 32,000 Hours
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1995 Make - Murata Centrum Model - 3000Q |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8945 , Year = 1995 , Make = Murata Centrum , Model = 3000Q |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: Capacity 33 Ton
|
| Ad #
8945 |
| Year:
| 1995
|
| Make:
| Murata Centrum
|
| Model:
| 3000Q
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 40 Station Turret, Includes 2 Auto Index
33 Tons Punching Capacity
Hydraulic Clutch/ Brake
Fanuc O P Series CNC Controller
114 Style Punch and Die Holders
Maximum Material Thickness .250"
78.740" x 60.039" Table Size ( X x Y )
One (1) Set of Work Holders ( 3 Holders)
|
|
|
| FOR SALE: Year - 1995 Make - Maurata Weidemann Model - Vectrum 5000 |
|---|
| FOR SALE: Ad # 8944 , Year = 1995 , Make = Maurata Weidemann , Model = Vectrum 5000 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: Capacity 50 Ton
|
| Ad #
8944 |
| Year:
| 1995
|
| Make:
| Maurata Weidemann
|
| Model:
| Vectrum 5000
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 45,000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Frame Design J-Frame
Press Capacity 50 Ton
Type of Punching Force Hydraulic
X Axis Travel 74"
Y Axis Travel 62"
Throat Depth 62"
Number of Turret Stations 52 Station
Type of CNC Control Fanuc 16P
Type of Clutch & Brake Fully Hydraulic
Maximum Material Thickness 3/8"
Stroke Per Minute Nibble 335 HPM
Strokes Per Minute on 1" Move 215 HPM
Number of Auto Index Stations 2
Type of Turret Tooling 114
Automatic Sheet Repositioning Yes
Equipped With Fully Hydraulic Programmable Ram
52 Station Tuuret
Two Auto Index Stations
Thermal Dynamic 150 AMP Plasma Unit
Chiller Unit
Complete Set of Punch Holders
Assortment of Tooling
Dust Collector
|
|
|
| FOR SALE: Year - 1994 Make - Finn-Power Model - TP4025 |
|---|
| FOR SALE: Ad # 8943 , Year = 1994 , Make = Finn-Power , Model = TP4025 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: Capacity 33 Ton
|
| Ad #
8943 |
| Year:
| 1994
|
| Make:
| Finn-Power
|
| Model:
| TP4025
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- w/Right Angle
Tonnage Capacity 33 Tons
Sheet Size 60" X 100"
Number of Stations 21 Tools (Thick Turret)
7 Auto
Indexing,3 Multi Tool
Max. Punch Diameter .250" (Aluminum, MIld
Steel)
Right Angle Shear 31" X 60"
Equipped With Siemens Sinumerik 880N Control
Loader/Unloader
Sorting/Stacking System
|
|
|
| FOR SALE: Year - 1995 Make - Strippit Model - 1000 SXP |
|---|
| FOR SALE: Ad # 8946 , Year = 1995 , Make = Strippit , Model = 1000 SXP |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: Capacity 33 Ton
|
| Ad #
8946 |
| Year:
| 1995
|
| Make:
| Strippit
|
| Model:
| 1000 SXP
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 27,000lbs
|
| Dimension: L x W x H | 185" X 126" X 86" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity 33 Tons
Workpiece Size 39.37" x 96"
Turret Drive Bi-Directional
One Station Index Time 0.7 Seconds
Maximum Axis Travel Speed: X-Axis 3200 IPM Y-
Axis 2400 IPM
Punch Capacity 3.5" Diameter 10 Gauge- 1.625"
Diameter 0.250"
Hits Per Minute 1" Centers
Material Thickness Less Than 0.120" 370HPM
Material Thickness More Than 0.120" 280HPM
Contour Nibbling Rate 370HPM
Accuracy +/-0.004"
Punch Motor 7.5HP
Machine Dimensions (W x D x H) 126" x 185" x 86"
Equipped With GE/Fanuc O-P CNC Control
Two (2) Auto Indexing,
RS232 Port
Complete Set of Tooling
33 Station Turret
|
|
|
| FOR SALE: Year - 1976 Make - Niagara Model - SCI-100-24-30 |
|---|
| FOR SALE: Ad # 8954 , Year = 1976 , Make = Niagara , Model = SCI-100-24-30 |
|
|
Category: Single Station Punches-CNC
|
Capacity: 100 Tons
|
| Ad #
8954 |
| Year:
| 1976
|
| Make:
| Niagara
|
| Model:
| SCI-100-24-30
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Specifications Capacity 100 Ton
Stroke 5"
Shut Height 18"
Slide Adjustment 8"
Bed Area 24" x 30"
Ram Area 24" x 30"
Speed 100 SPM
Main Drive 10 HP
Equipment & Features Air Clutch & Brake
3 1/2" Bloster plate
Auto Lube System
Double Palm Button
Forward/Reverse Motor
Front & Rear Guards with Electrical Interlocks
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1987 Make - Amada Pega Model - 345 King |
|---|
| FOR SALE: Ad # 8932 , Year = 1987 , Make = Amada Pega , Model = 345 King |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 1/4" Mild Steel
|
| Ad #
8932 |
| Year:
| 1987
|
| Make:
| Amada Pega
|
| Model:
| 345 King
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 21,400lbs
|
| Dimension: L x W x H | 16' X 9' X 7' |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Max Sheet Size (Without Repositioning) 40" x 50"
Max Punching Capacity (Mild Steel) 1/4"
Max Hits Per Minute 475
Max Sheet Weight 110 lbs
Total Tool Stations in Turret 44
Turret Configuration
18 @ 1/2" Dia
16 @ 1-1/4" Dia
4 @ 2" Dia
2 @ 3-1/2" Dia
2 @ 4-1/2" Dia
2 @ Auto Index (1-1/4" Dia)
Turret Speed 30 RPM
Max Positioning Speed 3150 Inches/Minute
Equipped With GE Fanuc (Amadon) 6M Control
Ball Transfer Table
|
|
|
We found 17 matching ads. Now displaying the remaining 17 ads.
| FOR SALE: Year - 2007 Make - Calypso Model - LWA |
|---|
| FOR SALE: Ad # 8950 , Year = 2007 , Make = Calypso , Model = LWA |
|
|
Category: Water Jet
|
Capacity: Travels 10' X 13' X 8'
|
| Ad #
8950 |
| Year:
| 2007
|
| Make:
| Calypso
|
| Model:
| LWA
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 10' x 13' x 8" Travels
Programmable Z-Axis
Dual Heads Cutting
Mirror Cutting Capabilities
Industrial Keyboard
Air Conditioned Control Cabinet
Remote Operators Pendant
All Slat Table
Water Recycling System
60 HP 60,000 PSI Intensifier Pump
Approximate 1000 Hrs Run Time
PC Based Controller
NC Geomate Programming Software
CAD Software Not Included, Requires DXF File)
NC Console Operating Software
Windows WP Pro
|
|
|
| FOR SALE: Year - 2000 Make - Romeo Model - Gold Series |
|---|
| FOR SALE: Ad # 8953 , Year = 2000 , Make = Romeo , Model = Gold Series |
|
|
Category: Water Jet
|
Capacity: Size 6' X 10'
|
| Ad #
8953 |
| Year:
| 2000
|
| Make:
| Romeo
|
| Model:
| Gold Series
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Control 2 1/2 Axes
Work Envelope 6' x 12'
Accuracy +/- 0.003"
Repeatability +/- 0.001"
Rapid Traverse 700IPM
Stainless Steel Sheetmetal
Air Conditioner
Pendant
High Load Cutting Bed
Reinforced Steel Tank
Pump Cutting Pressure 60,000 PSI
Pump Type KMT 30 HP Intensifier
30HP IR Low Hours Single Head
Less Than 600 Hrs. on Machine and Pump
Equipped With Gantry style for dynamic stability
Ballscrews with wear compensating nuts
Self-squaring design
Servos on all progammable axes
Fully stressed relieved, ground steel structure
chassis.
Micron Accuracy, Precision Guide Rails W/4Pt Ball
Contact for Rigidity
Neoprene/Hypalon Waycovers on All Axes
No Wrap-Around Covers to Puncture
Open Architecture PC-Controller Designed
Specifically for Waterjets
NEMA 12 Enclosure
Air Condidtioned Control Cabinet
Voltage 230/440
Controller completely updated in 2008
Ballscrews Rebuilt in 2008
Also Includes: 3 Months Full Warranty
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2004 Make - Multicam Model - MP-305 |
|---|
| FOR SALE: Ad # 8931 , Year = 2004 , Make = Multicam , Model = MP-305 |
|
|
Category: Plasma
|
Capacity: Travels 80" X 145"
|
| Ad #
8931 |
| Year:
| 2004
|
| Make:
| Multicam
|
| Model:
| MP-305
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 46,000lbs
|
| Dimension: L x W x H | 193" X 110" X 32" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Maximum Cutting Width 80"
Maximum Cutting Length 145"
Maximum Clearance Under Gantry 6"
Equipped With Multicam CNC Controls
Pendant Control
High Speed Contouring
Self Diagnostics
Hypertherm HPR 130 AMP
Hydefinition Plasma Power Source
Torch Interface
Manual Gas Console
Cutting Range .048"- 2" Oxygen
Hypertherm Automatic Torch Height Control
Precision Dual X-Axis Drives
|
|
|
| FOR SALE: Year - 1997 Make - Trumpf Model - L-2503 |
|---|
| FOR SALE: Ad # 8921 , Year = 1997 , Make = Trumpf , Model = L-2503 |
|
|
Category: Laser
|
Capacity: Travels 118" X 59" X 4.5"
|
| Ad #
8921 |
| Year:
| 1997
|
| Make:
| Trumpf
|
| Model:
| L-2503
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 28,658lbs
|
| Dimension: L x W x H | 416"L x 337"W x 79"H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Travels
X 118.1"
Y 59.1"
Z 4.5"
Maximum Positioning Speed 2632 Inches Per
Minute
Maximum Workpiece Weight 1528 Lbs.
Maximum Sheet Size 60" x 120"
Bosch CC 200 Trumagraph 32bit Multi Axis Control
Programmable Power Control
Hi-Resolution 9" Monochrome CRT
RS 232 Interface
Inch/Metric Programming, Custom Macro Capability
Equipped With Trumpf TLF 2600 Turbo 2600
WattResonator sn:445627
R-22 Refrigerant
460/3/60 33.4 AMP
Welded Steel Frame, Welded Aluminum Gantry
Linear Ball Bearing Guideways, Ballscrew Drives
Air Cooled Dual Circuit Chiller Rated to 105deg.
Ambient
Fume Collection System
Rittal Control Air Conditioner
40 KVA Transformer
Electrical Requirements
Laser 460/3/60 -116 AMPS
Chiller 460/3/60 -33.4 AMPS
Dust Collector 460/3/60 -12.5 AMPS
Oxygen 232 PSI
Clean Dry Air 87 PSI
Nitrogen 435 PSI
Machine Hours
2/21/2003 Replaced Resonator Due to:
Bad Bearing on Turbine at Laser42312 Beam24869
Resonator Hours At Shut Down on 7/23/2005 at:
Beam on 35640 Laser on 62690
7/25/2005 Laser Prof Decommissioned/Packed for
Ship
11,000 running hours
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1998 Make - Mitsubishi Model - 2512 LXP |
|---|
| FOR SALE: Ad # 8913 , Year = 1998 , Make = Mitsubishi , Model = 2512 LXP |
|
|
Category: Laser
|
Capacity: Travels 98.4" X 49.2" X 3.9"
|
| Ad #
8913 |
| Year:
| 1998
|
| Make:
| Mitsubishi
|
| Model:
| 2512 LXP
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Laser Output: Continuos 2000 Watts
Pulse 3000 Watts
Travels: X-Axis 98.4"
Y-Axis 49.2"
Z-Axis 3.9"
Maximum Work Piece Size 48" x 96"
Rapid Feed Rate 2,362 IPM
Max Feed Cutting Rate 590 IPM
Equipped With:
Mitsubishi LC10BV CNC Control
3020D Resonator
Automatic Pallet Shuttle System
Chiller
|
|
|
| FOR SALE: Year - 1999 Make - Mitsubishi Model - 2512 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8912 , Year = 1999 , Make = Mitsubishi , Model = 2512 |
|
|
Category: Laser
|
Capacity: Travels 98" X 49" X 3.9"
|
| Ad #
8912 |
| Year:
| 1999
|
| Make:
| Mitsubishi
|
| Model:
| 2512
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 7,950KG
|
| Dimension: L x W x H | 166" X 97" X 78" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Maximum Sheet Size 4 x 8'
Sheet Configuration Dual Pallet
Laser Design Flying Optic
Rated Power 3600 Watt
Maximum Power 5000 Watt
X-Axis Stroke 98"
Y-Axis Stroke 49"
Z-Axis Stroke 3.9"
Simulataneous Positioning Speed 4730IPM
Power Requirements
Laser 33 KVA
Control 8 KVA
Control Specifications
Mitsubishi LC20BP Control
3.5" Floppy Drive
RS232 Communications Port
Jog Pendant
Equipped With Mitsubishi Model ML5036D Laser
Resonator
Non-Contact Mitsubishi Cutting Head
Concoa Gas Regulators
Accuchiller Dual Circuit Chiller
(LaserCircuit&Optics)
Manuals
Installation and Training Available
Machine Dimensions
Main 166" X 97" X 78" H
Secondary Pallet 121" X 76" X35' H
Resonator 19" X 78" X 64" H
Chiller 56" X 34" X56" H
Approximate Power On Hours 28,627
Beam on Hours 13,593
Approximate Overall Machine Weight 7950 KG
|
|
|
| FOR SALE: Year - 2000 Make - NTC 5 Axis Cutting Model - TLM-610 |
|---|
| FOR SALE: Ad # 8915 , Year = 2000 , Make = NTC 5 Axis Cutting , Model = TLM-610 |
|
|
Category: Laser
|
Capacity: Travels 6' X 10'
|
| Ad #
8915 |
| Year:
| 2000
|
| Make:
| NTC 5 Axis Cutting
|
| Model:
| TLM-610
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | W X L 168" X 308" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Laser Resonator PRC 2200W Model STS
Hours Approximate 3000
Control Type: TDLC-04R
Table Size 75" x 122"
Table Height 27.5"
X-Axis 122"
Y-Axis 75"
Z-Axis 31" (from Table Top 3.9"-35"
Optical Head Front/ Back Travel
C-Axis+/-200Degrees
Optical Head
A-Axis +/- 180 Degree
Optical Head
X, Y Axis rapid Feed Rate 1378"/Min.
Z- Axis Rapid Feed Rate 1181"/Min.
C, A-Axis Apid Feed Rates 200 Degrees/ Seconds
Drive Motors: AC Servo
Drive Types: Ball Screw
Motion System, Linear Ball Guide Ways
Positioning Accuracy +/- 0.0016"/ 12"
Floor Space W x L 168" x 308"
|
|
|
| FOR SALE: Year - 1998 Make - NTC 5 Axis Cutting Model - TLM610 |
|---|
| FOR SALE: Ad # 8914 , Year = 1998 , Make = NTC 5 Axis Cutting , Model = TLM610 |
|
|
Category: Laser
|
Capacity: Travels 6' X 10'
|
| Ad #
8914 |
| Year:
| 1998
|
| Make:
| NTC 5 Axis Cutting
|
| Model:
| TLM610
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Laser Resonator: PRC 2200W Model SL
Hours Aprox 20,000
PRC Serviced all internal and external Optics
3/2008
Including:Change Vacuum Pump Oil. Laser Tuning.
Machine Alignment
Koolant Koolers Chiller
Control Type: 04R
Table size 75" x 122"
Table height 27.5"
X-Axis 122"
Y-Axis 75"
Z-Axis 31"(From Table Top 3.9"-35"
Optical Head Front/ Back Travel
C-Axis =/- 200Degrees
Optical Head
A-Axis =/- 180Degrees
Optical Head
X, Y-Axis Rapid Feed Rate 1378"/Min
Z-axis Rapid Feed Rate 1181"/min.
C, A-axis apid Feed Rates 200° /sec.
Maximum Cutting Rate X, Y, Z-axis 1.2" -
1181"/min.
C, A-axis MAX 200°/sec.
Drive motors: AC servo
Drive types: Ball screw
Motion System, Linear ball guide ways
Positioning accuracy =/-0.04mm 0.0016") /300mm
(12")
Floor space W x L 168" x 308"
|
|
|
| FOR SALE: Year - 2000 Make - NTC 5 Axis Cutting Model - TLV-510 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8916 , Year = 2000 , Make = NTC 5 Axis Cutting , Model = TLV-510 |
|
|
Category: Laser
|
Capacity:
|
| Ad #
8916 |
| Year:
| 2000
|
| Make:
| NTC 5 Axis Cutting
|
| Model:
| TLV-510
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 22,050lbs
|
| Dimension: L x W x H | 128" X 300" |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Laser system: Fanuc 1,500 Watt
Table size: 61 x 122
Table height: 36
Working stroke:
X-Axis: 122"
Y Axis 61"
Z Axis 6"
Rapid Feed Rate (X & Y Axis) 1,181 IPM
Rapid Feed Rate (Z Axis) 393 IPM
Cutting Feed Rate (X,Y & Z Axis) 787 IPM
Drive Motor AC Servo Motor
Drive Mechanism Ball Screws
Guide Mechanism Linear Ball Guide
Positioning accuracy: + 0.0008 / 12
Floor space (W x L x H) 128 x 300
Equipped With Fanuc C2000 1,500 watt Resonator
Chiller
Contact gap sensor
7.5 focal lens holder
Air dryer
Integrated stationary operation panel
Fanuc 16i-L CNC Controller
Manual jog handle
Material conveyor
Approximately 21,000 total hours
|
|
|
| FOR SALE: Year - 1999 Make - Cincinnati Model - CL-6 |
|---|
| FOR SALE: Ad # 8900 , Year = 1999 , Make = Cincinnati , Model = CL-6 |
|
|
Category: Laser
|
Capacity: Max Sheet Size 4' x 8'
|
| Ad #
8900 |
| Year:
| 1999
|
| Make:
| Cincinnati
|
| Model:
| CL-6
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Max Sheet Size 4' x 8'
Sheet Configuration Dual Pallet
Resonator Wattage 1500
Equipped With GE Fanuc 160IL Windows NT Based
CNC Control
Dynamic Power Control
Hi Resolution 12" Color LCD
Inch/Metric Programming
1.6 GB Hard Drive
3.5" Floppy Drive
Cutom Macro Capability
Look Ahead Tool Path Error Compensation
GE Fanuc Model C1500, 1500 Watt RF Fast Axial
Flow Resonator
Dual Pallet Configuration
Brushless AC Servo Motors
Programmable High Pressure Assist Gas
Rigid Steel Frame Construction
Automatic Lubrication
Lasermech Non-Contact Cutting Head With 5 and
7 1/2" Cutting Lenses
Quick Adjust Material Clamps
Safety Lights and Mats
Scrap Removal System
Transformer
30 KVA, Primary 460V, Secondary 380V
Koolant Koolers 5K Chillers
460/3/60 25.7 AMPS
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1998 Make - Mazak Model - NTX48 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 8906 , Year = 1998 , Make = Mazak , Model = NTX48 |
|
|
Category: Laser
|
Capacity: Travels 96"X48"X3.9"
|
| Ad #
8906 |
| Year:
| 1998
|
| Make:
| Mazak
|
| Model:
| NTX48
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 21,600lbs
|
| Dimension: L x W x H | 154" L X 60"W X 111" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Machine Design Hybrid
Resonator Panasonic
Maximum Laser Capacity 1500 Watt
Maximum Y Axis Travel 48"
Maximum X Axis Travel 96"
Maximum Z Axis Travel 3.9"
Number of Tables 1
Control Mazak L32 16Bit
Rapid Traverse Rate 945 Inches/Minute
Equipped With Chiller
Scrap Conveyor
Non-Contact-Type Capacitive Sensing Cutting Head
Panasonic Type 7 Resonator
Approximate/Overall Weight 21.600 Lbs.
Approximate/Overall Hours 30.969
Electrical Requirements 230/460.3.60
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1998 Make - Cincinnati Model - CL707 |
|---|
| FOR SALE: Ad # 8902 , Year = 1998 , Make = Cincinnati , Model = CL707 |
|
|
Category: Laser
|
Capacity: Maximum Sheet Size 5' X 10'
|
| Ad #
8902 |
| Year:
| 1998
|
| Make:
| Cincinnati
|
| Model:
| CL707
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Maximum Sheet Size 5' X 10'
Sheet Configuration Dual Pallet
Laser Design Flying Optic
Maximum Positioning Speeds 10,000 Inches/Min
Resonator Wattage 2500
Control Features
Cincinnati 32 Bit CNC Controls
Windows NT Operating System
High Resolution 14" SVGA 14" Color CRT Monitor
3.5" Floppy Drive
CD-Rom Drive
Ethernet Network Interface
Modem
1.0 GB Part Program Storage
Unlimited Background Edit Capabilities
Equipped With High Speed Linear Brushless Motors
Rofin Sinar Model DC025, 2500 Watt Slab Resonator
Fume Blower
High Speed Z-Axis
Aluminum Honeycomb Gantry
Dynamic Power Control Auto Slow While Cornering
Rigid Steel Frame Construction
Automatic Lubrication on X and Y Axis
Non-Contact Break Away Head W/ 7 1/2" Lenses
7 1/2" Break Away Contact Head
Load Frame Drip Pan
Programmable Part Coolant
Custom Macro"s
Fume Collection Plenum With Fume Blower
Ball Transfer Load Clamps
Programmable High Pressure Assist Gas
Quick Adjust Material Clamps
Safety Lights and Mats
Scrap Removal System
|
|
|
| FOR SALE: Year - 1996 Make - Amada Model - LC3015DII |
|---|
| FOR SALE: Ad # 8894 , Year = 1996 , Make = Amada , Model = LC3015DII |
|
|
Category: Laser
|
Capacity: Max Sheet Size 60" x 120"
|
| Ad #
8894 |
| Year:
| 1996
|
| Make:
| Amada
|
| Model:
| LC3015DII
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 13,000
|
| Dimension: L x W x H | 20ft x 13ft x 8ft |
Machine Location:
|
| City: |
On Request
|
| State: |
California
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fanuc 16L CNC Control
Max Laser Output 2000 Watt
Travels: X-Axis 122"
Y-Axis 61"
Z-Axis 7.9"
Max Sheet Size 60" x 120"
Equipped With:
Fanuc 16L Cntrol
Fanuc C2000B Resonator
Non-Contact Hi Pressure Cutting Head
Chiller
Torit Downflow Dust Collector
Note: Blower Just Rebuilt & 12,000 Hour Refurb by Fanuc
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2004 Make - Amada Model - FO-3015 |
|---|
| FOR SALE: Ad # 8893 , Year = 2004 , Make = Amada , Model = FO-3015 |
|
|
Category: Laser
|
Capacity: Pallet Size 120" x 60"
|
| Ad #
8893 |
| Year:
| 2004
|
| Make:
| Amada
|
| Model:
| FO-3015
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Maximum Laser Capacity 4,000 Watts
Number of Pallets 2
Pallet Size 120" x 60"
Y Axis Travel 122" (Max.)
X Axis Travel 61" (Max.)
Z Axis Travel 7.8" (Max.)
Rapid Traverse Rate 3,150 IPM
Equipped With Fanuc 16iL CNC Control
X Axis "Dual Drive" Rank and Pinoin Gantry
High Speed Pallet Shuttle System
Cast Iron Frame
Approximate: 27,978 Hours
Hours on Vane Pump and Blower (Approximate) 7,467 Hours
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2005 Make - Bystronic Bystar Model - 3015 |
|---|
| FOR SALE: Ad # 8897 , Year = 2005 , Make = Bystronic Bystar , Model = 3015 |
|
|
Category: Laser
|
Capacity: Travels X 120" x Y 60" x Z 6.7"
|
| Ad #
8897 |
| Year:
| 2005
|
| Make:
| Bystronic Bystar
|
| Model:
| 3015
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 29,785lbs
|
| Dimension: L x W x H | 507"L x 240" W x 82" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Travels X 120" x Y 60" x Z 6.7"
Maximum Positioning Speeds X and Y Axis 3150" /
Min.
Simultaneous 4450" / Min.
Work Piece Weight 1962 Lbs.
Sheet Thickness
Mild Steel 1.0"
Stainless .75"
Aluminum .50"
Axel Acceleration 177"/ Sec 2
Standard Control Features
Bystronic Windows Based Multi Axis Control
15" Touchscreen Hi-Resolution Color Liquid Crystal
Disp
RJ45 Connector 10/100 MB it/s, 3.5" Floppy, 250
MB Zip Disk, CD-RW
Inch/Metric Programming, Custom Macro Capability
Equipped With Bylaser 5200 ARC, 5200 Watt Fast
Axial Flow Resonator
7.5" Cutting Lense
Moveable Scrap Trays
Torit Dust Collector
Gas Regulators
Chiller
Dual Pallet with Automatic Pallet Changer
Welded Steel Frame
Welded Aluminum Gantry
Automatic Sheet Edge Senson
Laser Resonator Gas Kit
Assist Gas Kit
Electrical Required Laser 460/3/60 AMPS
Chiller 460/3/60 AMPS
Dust Collector 460/3/60 AMPS
Air Required Clean Dry Air PSI
Nitrogen PSI
Oxygen PSI
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2004 Make - Amada Apelio Model - III 2510V |
|---|
| FOR SALE: Ad # 8895 , Year = 2004 , Make = Amada Apelio , Model = III 2510V |
|
|
Category: Laser
|
Capacity: Maximum Sheet Size 50" x 196"
|
| Ad #
8895 |
| Year:
| 2004
|
| Make:
| Amada Apelio
|
| Model:
| III 2510V
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Punching Capacity 22 Ton
Maximum Laser Output 4,000 Watt
Maximum Material Thickness (punch) 3/16"
Mild Steel)
Maximum Sheet Size 50" x 196"
(with 1 reposition)
Axis Travels: X-Axis 98
Y-Axis 50
Z-Axis 11.8
Maximum Sheet Weight 330 Lbs
Table Axis FeedRate: X / Y-Axis 3937 / 3149 ipm
Z-Axis 1574 ipm
Maximum Hit Rate: 410 HPM .315 move
340 HPM 1" Move
Turret Configuration (thick) 31 Stations
3 Auto Index (2)-1-1/4
(2)-1-1/4
Equipped With Fanuc 160iL CNC Control
Upgraded Fanuc 4000 Watt Laser
Amada AS/ULX Automatic Load/Unload System
complete with 6 shelf storage tower
(3) Auto-Index Stations
Automatic Repositioning
Amnet 2000 Line Control Software
Fanuc Servos and Controller
Total On the Fly Cut Condition and Power Control
High Speed Non-Contact Capacitive Head
Ball Transfer Contact Head
B-Axis Automatic Focus Control
Work Chute size of 19.6 x 19.6
3 Automatic Assist Gas Ports
High Pressure Assist Gas
Orion Chiller Unit
Torit Dust Collector
|
|
|
| FOR SALE: Year - 2000 Make - Amada Hybrid Pulsar Model - 2415 |
|---|
| FOR SALE: Ad # 8892 , Year = 2000 , Make = Amada Hybrid Pulsar , Model = 2415 |
|
|
Category: Laser
|
Capacity: 61 x 198 Sheet Size
|
| Ad #
8892 |
| Year:
| 2000
|
| Make:
| Amada Hybrid Pulsar
|
| Model:
| 2415
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Arizona
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 2000 Watt
99 x 61 X, Y Travels
61 x 198 Sheet Size equipped With Fanuc 160i-L
CNC Control
Fanuc AF2000E 2000 Watt Resonator
Automatic Sheet Repositioning (2) Heads (Roller &
Non-Contact Sensor Head)
Koolant Koolers Chiller, Donaldson Torit Dust
Collector
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
