|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1979 Make - IKEGAI Model - FX25N |
|---|
| FOR SALE: Ad # 2284 , Year = 1979 , Make = IKEGAI , Model = FX25N | 
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: IKEGAI FX25N CNC TURNING CENTER
|
| Ad #
2284 |
| Year:
| 1979
|
| Make:
| IKEGAI
|
| Model:
| FX25N
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 7' x 4' x 6' (approx.) |
Machine Location:
|
| City: |
On Request
|
| State: |
Massachusetts
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- BUILT 1979
FANUC CONTROL
10 & 12" HYDRAULIC CHUCKS
25" SWING
8 STATION TOOL TURRET
LOTS OF TOOLING
LOOKS & RUNS VERY GOOD
HOLDS TOLERANCES VERY GOOD
SHOP READY!
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 1998 Make - Clausing Model - METOSA EL-1565 |
|---|
| FOR SALE: Ad # 3276 , Year = 1998 , Make = Clausing , Model = METOSA EL-1565 |
|
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: CLAUSING METOSA EL-1565 CNC LATHE
|
| Ad #
3276 |
| Year:
| 1998
|
| Make:
| Clausing
|
| Model:
| METOSA EL-1565
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: | 5,000 LBS
|
| Dimension: L x W x H | 121" x 57" x 62" |
Machine Location:
|
| City: |
On Request
|
| State: |
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- MAXIMUM SWING OVER BED 15.75"
SWING OVER CARRIAGE 14.56"
SWING OVER CROSS SLIDE 8.25"
DISTANCE BETWEEN CENTERS 65"
X AXIS TRAVEL 12"
Z AXIS TRAVEL 65"
RAPID TRAVERSE RATE X AXIS 393 IPM
RAPID TRAVERSE RATE Z AXIS 393 IPM
SPINDLE NOSE D1-6
SPINDLE BORE 2.03"
SPINDLE SPEEDS (3 RANGES) 0 - 2300 RPM
SPINDLE MOTOR 10 HP
TOOLING CAPACITY TOOL POST
TAILSTOCK QUILL TAPER MT #5
TAILSTOCK QUILL DIAMETER 2.31"
TAILSTOCK QUILL STROKE 6.25"
|
| Comments: |
- FAGOR 800T CNC CONTROL WITH 9" CRT SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
10" 3-JAW MANUAL THROUGH HOLE CHUCK WITH
JAWS
CONSTANT SURFACE SPEED, INCH/METRIC
THREADING
2 ELECTRONIC HANDWHEELS (X/Z) - FINE/COURSE
MANUAL TAILSTOCK WITH HANDLE-FEED OUT
QUILL
STANDARD COOLANT SYSTEM WITH TANK & PUMP
ALL AVAILABLE TOOL HOLDERS, ALL AVAILABLE
MANAULS
Control moves along a rail for ease of set-up,
programming and running parts
LOCATION: IN PLANT UNDER POWER
|
|
|
| FOR SALE: Year - 1997 Make - Harrison Model - Alpha 400 |
|---|
| FOR SALE: Ad # 5797 , Year = 1997 , Make = Harrison , Model = Alpha 400 |
|
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: Harrison Alpha 400, 10" Chuck, 2" thru hole, 2500 RPM, Fanuc control,
|
| Ad #
5797 |
| Year:
| 1997
|
| Make:
| Harrison
|
| Model:
| Alpha 400
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Massachusetts
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Specifications:
Category: Lathe CNC Combination
Description: Lathe
Manufacturer: Harrison
Model: Alpha-400
Features: 600 Lathe series
2500 RPM Spindle
GE Fanuc Controller
Aloris Quick Change Toolpost
Drill Chuck
Coolant System
Condition: Excellent
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1987 Make - Kuraki Model - KBT-13DXA |
|---|
| FOR SALE: Ad # 6723 , Year = 1987 , Make = Kuraki , Model = KBT-13DXA |
|
|
Category: CNC Horizontal Boring Mills
|
Capacity:
|
| Ad #
6723 |
| Year:
| 1987
|
| Make:
| Kuraki
|
| Model:
| KBT-13DXA
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: |
|
| Weight: | 70,400 LBS.
|
| Dimension: L x W x H | 263.78" x 263.78" x 187.01" |
Machine Location:
|
| City: |
On Request
|
| State: |
Massachusetts
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- USED KURAKI KBT-13DXA CNC HORIZONTAL BORING & MILLING MACHINE
WITH 6 AXIS FANUC 11M CONTROL
NEW 1987
SPECIFICATIONS:
SPINDLE DIAMETER 5.12”
SPINDLE TAPER ISO NO. 50
SPINDLE SPEEDS (3 STEP GEAR CHANGE) 5 - 1300 RPM
SPINDLE HEAD VERTICAL TRAVEL (Y) 78.74"
TABLE CROSS TRAVEL (X) 118.11"
COLUMN LONGITUDINAL TRAVEL (Z) 51.18"
SPINDLE CENTER TO TABLE SURFACE 0 - 78.74"
SPINDLE AXIAL TRAVEL (W) 27.56"
TABLE SIZE 62.99" x 70.87"
MAXIMUM LOADING WEIGHT 26400 LBS.
MAX. LOADING WEIGHT - 13DX-ANP 17600 LBS.
AUTOMATIC TABLE INDEXING 90 DEGREES
FEED RATE (X, Y, Z & W) 0.04 - 141.73 IPM
RAPID TRAVERSE (X, Y, & Z) 393.70 IPM
(W) 236.22 IPM
RAPID TABLE ROTARY SPEED 0.83 RPM
MAIN MOTOR AC 30 HP/30 MIN. RATING
FEED MOTOR (X & Z) AC 9.5 HP
(W, Y & B) 4.5 HP
TABLE ROTATION AC 3.7 HP
HYDRAULIC PUMP MOTOR AC 3 HP
SPINDLE LUBRICATION AC 0.13 HP
SLIDE WAYS LUBRICATION AC 0.08 HP
SPIRAL CHIP CONVEYOR AC 0.53 HP
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
SPECIFICATIONS CONTINUED:
ELECTRIC POWER SOURCE
VOLTAGE AC 200/220V +/- 10%
50/60 Hz +/- 1%
CAPACITY 65 KVA
WIRES 100mm 2 X 3 WIRES
FOR EARTH 22mm 2 X 1 WIRE
COMPRESSED AIR - PRESSURE OVER 5 kg/cm2
150 LITERS/MIN.
MACHINE HEIGHT 187.01"
FLOOR SPACE 263.78" x 263.78"
MACHINE WEIGHT (INCLUDING NC UNIT) 70,400 LBS.
AUTOMATIC TOOL CHANGER:
TOOL SHANK MAS BT50
PULL STUD MAS P50T-1
TOOL STORAGE CAPACITY 40 PIECES
MAXIMUM TOOL DIAMETER 4.92"
VACANT ADJACENT POTS 9.05"
MAXIMUM TOOL LENGTH 15.75"
MAXIMUM TOOL WEIGHT 55 LBS.
TOOL SELECTION RANDOM
EQUIPPED WITH:
COIL TYPE CHIP CONVEYOR
CHIP COVER FOR SLIDE WAY
SPINDLE SPEED METER & LOAD METER
MANUAL PULSE GENERATOR
WORK LIGHT
SIGNAL LIGHT
POWER SHUTOFF DEVICE
MANUAL SPINDLE SETTING DEVICE
MONOLEVER TYPE JOG FEED
SELF DIAGNOSIS FUNCTION
14" COLOR CRT
DOOR INTERLOCK ON EC BOX
COOLANT DEVICE B WITH LIFT CHIP CONVEYOR
DIGITAL READOUT FOR TABLE ROTATION
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
STANDARD SPECIFICATIONS FOR FANUC 11M CONTROL:
CONTROLLED AXES 4 AXES (X, Y, Z & W)
SIMULTANEOUS CONTROLLED AXES 4 AXES
TAPE CODE EIA/ISO AUTOMATIC
LEAST COMMANDED INCREMENT 0.0001"
MAX. PROGRAMMABLE DIMENSION +/- 9999.9999"
DECIMAL POINT INPUT
FEED RATE COMMAND DIRECT DESIGNATION
FEED RATE OVERRIDE 0 - 200% (EVERY 10%)
TANGENTIAL SPEED CONSTANT CONTROL
AUTOMATIC ACCELERATION/DECELERATION
POSITIONING
LINEAR INTERPOLATION
ABSOLUTE/INCREMENTAL PROGRAMMING - USE IN SAME BLOCK
MACHINE COORDINATES SYSTEM SELECTION - G53
LOCAL COORDINATE SYSTEM SETTING - G52
WORK COORDINATE SYSTEM CHANGE - G92
BUFFER REGISTER
DWELL
M CODE OUT PUT M 3 DIGITS
MDI & CRT 14" COLOR
TAPE STORAGE LENGTH 320 METERS.
BACK GROUND EDITING EDITING DURING AUTO. OPERATION
REGISTERABLE PROGRAMS 100
SELF DIAGNOSIS FUNCTIONS
BACKLASH COMPENSATION MAX. 9999 PULSES
SINGLE BLOCK
OPTIONAL BLOCK SKIP
MANUAL ABSOLUTE ON/OFF
MIRROR IMAGE
DRY RUN
INTERLOCK
MACHINE LOCK
Z AXIS MACHINE LOCK
FEED HOLD
MANUAL JOG FEED
EMERGENCY STOP
FOLLOW UP AT EMERGENCY STOP, SIGNAL INPUT
SEQUENCE NUMBER DISPLAY 5 DIGITS
SEQUENCE NUMBER SEARCH
PROGRAM NUMBER 4 DIGITS
PROGRAM NAME 16 CHARACTERS
PROGRAM NUMBER SEARCH
EXACT STOP/CUTTING MODE G09, G61, G63, G64
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
STANDARD SPECIFICATIONS FOR FANUC 11M CONTROL:
AUXILIARY FUNCTION LOCK
MULTI-QUADRANT CIRCULAR INTERPOLATION
RADIUS DESIGNATION ON ARC
CANNED CYCLE G73, G74, G76, G80-G89, G98, G99
CUTTER COMPENSATION C G40-G42
TOOL LENGTH COMPENSATION
TOOL OFFSET AMOUNT MEMORY C +/- 6 DIGITS, 200 PAIRS
REFERENCE POINT RETURN,
MANUAL/ABSOLUTE G27, G28, G29
2ND REFERENCE POINT RETURN
MANUAL PULSE GENERATOR
S CODE OUTPUT S-4 DIGITS
T CODE OUTPUT T-2 DIGITS
INCH/METRIC CONVERSION
PROGRAMMABLE DATA INPUT G10
STORED STROKE LIMIT I
STORED PITCH ERROR COMPENSATION
RAPID FEED OVERRIDE
PROGRAM RESTART
EXTERNAL DATA INPUT/OUTPUT TOOL OFFSET AMOUNT
MACHINE COORDINATE SYSTEM
SHIFT AMOUNT
ALARM MESSAGE
OPERATOR MESSAGE
PROGRAM NUMBER SEARCH
SEQUENCE NUMBER SEARCH
INPUT/OUTPUT INTERFACE RS 232C OR 20mA CURRENT LOOP
RUN HOUR DISPLAY
SPINDLE ORIENTATION
CUSTOM MACRO
SKIP FUNCTION
SINGLE DIRECTION POSITIONING
CORNER R
F1 DIGIT FEED
PROGRAMMABLE MIRROR IMAGE
AUTOMATIC CORNER OVERRIDE
COORDINATE SYSTEM ROTATION
6TH AXIS INTERFACE FOR KNIGHT CNC ROTARY TABLE
ALSO INCLUDING KNIGHT 30” CNC ROTARY TABLE WITH 72” MAXIMUM PART DIAMETER SWING
TERMS:PAYMENT IN FULL PRIOR TO SHIPMENT
PRICE: UNDER POWER IN LOCAL PLANT $385,000.00 net
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1965 Make - Niagara Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 7938 , Year = 1965 , Make = Niagara , Model = |
|
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 8' x 1/4" mild steel
|
| Ad #
7938 |
| Year:
| 1965
|
| Make:
| Niagara
|
| Model:
|
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Massachusetts
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- NIAGARA POWER SQUARING SHEAR
APPROX. AGE: 1965
CAPACITY: 8' X 1/4" MILD STEEL
EQUIPPED WITH:
36" FRONT OPERATED POWERED BACKGUAGE
FOOT PEDAL OPERATION
CONDITION: VERY GOOD
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1970's Make - Pullmax Model - P-6 |
|---|
| FOR SALE: Ad # 5728 , Year = 1970's , Make = Pullmax , Model = P-6 |
|
|
Category: Tube & Pipe Notchers
|
Capacity: PULLMAX P-6 NOTCHER
|
| Ad #
5728 |
| Year:
| 1970's
|
| Make:
| Pullmax
|
| Model:
| P-6
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Minnesota
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity:
Shearing: Mild Steel: 1/4"
Shearing: Stainless: 3/16"
Nibbling: Mild Steel: 5/32"
Nibbling: Stainless: 12 ga.
42" Throat
3 hp Motor
Stand
|
| Electrical Description |
|
|
| Comments: |
- MACHINE IS IN GOOD WORKING CONDITION WITH
SOME TOOLING. (SEE PHOTOS.) THERE IS ONE MORE
SET OF TOOLING, PHOTO UPON REQUEST.
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
