User SearchYour search results (if any) appear below in groups of 75 for each section.
Grinding Machinery
We found 9 matching ads. Now displaying the remaining 9 ads.
FOR SALE: Year - 1953 Make - Brown & Sharp Model - # 2 |
---|
FOR SALE: Ad # 14895 , Year = 1953 , Make = Brown & Sharp , Model = # 2 |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: ID/OD grinder: 14" swing x 30" centers
|
Ad #
14895 |
Year:
| 1953
|
Make:
| Brown & Sharp
|
Model:
| # 2
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 5500lbs
|
Dimension: L x W x H | 8ft x 5 ft x 6 ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers swivel table and head-universal grinding wheel: 16" dia Std specs below-please verify actual machine 14" X 30" BROWN & SHARPE UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER MODEL:#2 S/N: 521-2-11 NEW: 1953 NOMINAL SWING ................... 14" DISTANCE BETWEEN CENTERS, NOMINAL ... 30" DISTANCE BETWEEN CENTERS, MAX ... 33-3/4" WHEELHEAD MOTOR ........... 3 HP WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM WHEEL SIZE .......... 14" X 1-1/2" X 5" WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG. WHEEL SPINDLE SWIVELS ...........90 DEG. HEADSTOCK MOTOR ............. 1/2 HP HEADSTOCK SWIVELS ........... 180 DEG. INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM SPINDLE NOSE ............... A2-6" INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW 0.1" FAST DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS SWIVEL TABLE - TAPER PER FOOT .... 5" BACK 1-1/2" FORWARD - SCALES FOR ANGULAR SETTING 12 DEG. BACK 3 DEG. FORWARD AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003" POSITIVE STOP SETTING ...... 0.00002" APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS DIMENSIONS ..... 112"W X 62"L X 61"H EQUIPPED WITH: SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it HYDRAULIC OPERATOR FEATURING: -POWER TABLE TRAVERSE -AUTOMATIC INFEED -AUTOMATIC PLUNGE INFEED RIGHT OR LEFT END WHEEL MOUNTING DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN COMBINATION STRAIGHT AND TAPER GRINDING DUAL DEAD/LIVE HEADSTOCK SPINDLE PULL-OUT HYDRAULIC SYSTEM COOLANT SYSTEM CHUCK IS MOUNTED ON WORKHEAD SPINDLE WORK LIGHT PRESENTLY WIRED FOR 3/60/220 VOLTS Note: very nice running grinder!
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1953 Make - Brown & Sharp Model - # 2 |
---|
FOR SALE: Ad # 14895 , Year = 1953 , Make = Brown & Sharp , Model = # 2 |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: ID/OD grinder: 14" swing x 30" centers
|
Ad #
14895 |
Year:
| 1953
|
Make:
| Brown & Sharp
|
Model:
| # 2
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 5500lbs
|
Dimension: L x W x H | 8ft x 5 ft x 6 ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers swivel table and head-universal grinding wheel: 16" dia Std specs below-please verify actual machine 14" X 30" BROWN & SHARPE UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER MODEL:#2 S/N: 521-2-11 NEW: 1953 NOMINAL SWING ................... 14" DISTANCE BETWEEN CENTERS, NOMINAL ... 30" DISTANCE BETWEEN CENTERS, MAX ... 33-3/4" WHEELHEAD MOTOR ........... 3 HP WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM WHEEL SIZE .......... 14" X 1-1/2" X 5" WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG. WHEEL SPINDLE SWIVELS ...........90 DEG. HEADSTOCK MOTOR ............. 1/2 HP HEADSTOCK SWIVELS ........... 180 DEG. INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM SPINDLE NOSE ............... A2-6" INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW 0.1" FAST DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS SWIVEL TABLE - TAPER PER FOOT .... 5" BACK 1-1/2" FORWARD - SCALES FOR ANGULAR SETTING 12 DEG. BACK 3 DEG. FORWARD AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003" POSITIVE STOP SETTING ...... 0.00002" APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS DIMENSIONS ..... 112"W X 62"L X 61"H EQUIPPED WITH: SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it HYDRAULIC OPERATOR FEATURING: -POWER TABLE TRAVERSE -AUTOMATIC INFEED -AUTOMATIC PLUNGE INFEED RIGHT OR LEFT END WHEEL MOUNTING DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN COMBINATION STRAIGHT AND TAPER GRINDING DUAL DEAD/LIVE HEADSTOCK SPINDLE PULL-OUT HYDRAULIC SYSTEM COOLANT SYSTEM CHUCK IS MOUNTED ON WORKHEAD SPINDLE WORK LIGHT PRESENTLY WIRED FOR 3/60/220 VOLTS Note: very nice running grinder!
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1991 Make - Strausak Model - 57-U/CNC |
---|
FOR SALE: Ad # 5110 , Year = 1991 , Make = Strausak , Model = 57-U/CNC |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Swiss Built CNC Universal (ID/OD) Precision Grinder
|
Ad #
5110 |
Year:
| 1991
|
Make:
| Strausak
|
Model:
| 57-U/CNC
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | approx: 7500Lbs
|
Dimension: L x W x H | 8 x 8 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Swiss Built CNC Universal (ID/OD) Precision
Grinder Almost no hrs on machine...like new Travels: X: 680 mm (26.8") Y: 260 mm (10.25") Detailed specs: Main power input: 460/3 load 15KW fused at 25A air supply: 6 bar pressure, consumption 2m3/h X-Axis:travel: 260MM, smallest travel increment 0.001mm, max travel speed: 6000 mm/min, feed motor torque 2Nm spindle pitch 5mm Y-Axis :travel 260mm, smallest travel increment 0.001mm, speed max 6000nm/min, torque 2Nm, turret head-below External grinding unit: wheel dia 250mm torque 12.7Nm motor 4kw,3000rpm,transmission 1:1 spindle speed range 2000-6000 Internal grinding unit:wheel dia 10-32mm,speed range 9000-45,000rpm,torque 0.75Nm, power 3.5KW/ 8.2A workhead: MK5 taper, transmission 10:1, speed range 0-350 RPM, torque 40Nm tailstock: stepless 0-600N,lateral adj +- 0.08 nm travel betwween centers max50mm-min/29mm Min Dual OD Grinding Wheels: Wheel Diameter: 250 mm (10") Motor Power: 4kW (5.5 hp) Spindle Speed: 2,000 - 6,000 rpm ID Spindle speed: 45,000 RPM Wheel base manually swivels between ID/OD spindles with degree scale on base-w axis uses chuck or collet system Control: IBH micro modus 2 S/N# 90.7865 Internal Grinding Spindle: (Turret Mounted) Type: MFN 1045 I.D. Spindle Speed: 9,000 - 45,000 rpm Motor Power: 3.5 kW (4.5 hp) Workhead: Mounting Taper: MK 5 Speed Range: 0 - 350 rpm (programmable) Torque at Spindle: 40 Nm Control: ZBH Micro-Modus 2# H6.0.00V2A0S Has canned cylces in control Also includes: Continuous Path "U" Axis- manual rotate of base with Remote jog Pendent Have All Manuals/electrical-operation in english and german language Control # ABNR-9004.124.084 S/N # 90.7685 Note:Iron is like new ,little used..Machine has control issue but comes up with alarm-we think it could be very minor, paramaters,door interlocks,ect..not major? priced to sell !! might want to update with new control?
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1991 Make - Strausak Model - 57-U/CNC |
---|
FOR SALE: Ad # 5110 , Year = 1991 , Make = Strausak , Model = 57-U/CNC |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Swiss Built CNC Universal (ID/OD) Precision Grinder
|
Ad #
5110 |
Year:
| 1991
|
Make:
| Strausak
|
Model:
| 57-U/CNC
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | approx: 7500Lbs
|
Dimension: L x W x H | 8 x 8 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Swiss Built CNC Universal (ID/OD) Precision
Grinder Almost no hrs on machine...like new Travels: X: 680 mm (26.8") Y: 260 mm (10.25") Detailed specs: Main power input: 460/3 load 15KW fused at 25A air supply: 6 bar pressure, consumption 2m3/h X-Axis:travel: 260MM, smallest travel increment 0.001mm, max travel speed: 6000 mm/min, feed motor torque 2Nm spindle pitch 5mm Y-Axis :travel 260mm, smallest travel increment 0.001mm, speed max 6000nm/min, torque 2Nm, turret head-below External grinding unit: wheel dia 250mm torque 12.7Nm motor 4kw,3000rpm,transmission 1:1 spindle speed range 2000-6000 Internal grinding unit:wheel dia 10-32mm,speed range 9000-45,000rpm,torque 0.75Nm, power 3.5KW/ 8.2A workhead: MK5 taper, transmission 10:1, speed range 0-350 RPM, torque 40Nm tailstock: stepless 0-600N,lateral adj +- 0.08 nm travel betwween centers max50mm-min/29mm Min Dual OD Grinding Wheels: Wheel Diameter: 250 mm (10") Motor Power: 4kW (5.5 hp) Spindle Speed: 2,000 - 6,000 rpm ID Spindle speed: 45,000 RPM Wheel base manually swivels between ID/OD spindles with degree scale on base-w axis uses chuck or collet system Control: IBH micro modus 2 S/N# 90.7865 Internal Grinding Spindle: (Turret Mounted) Type: MFN 1045 I.D. Spindle Speed: 9,000 - 45,000 rpm Motor Power: 3.5 kW (4.5 hp) Workhead: Mounting Taper: MK 5 Speed Range: 0 - 350 rpm (programmable) Torque at Spindle: 40 Nm Control: ZBH Micro-Modus 2# H6.0.00V2A0S Has canned cylces in control Also includes: Continuous Path "U" Axis- manual rotate of base with Remote jog Pendent Have All Manuals/electrical-operation in english and german language Control # ABNR-9004.124.084 S/N # 90.7685 Note:Iron is like new ,little used..Machine has control issue but comes up with alarm-we think it could be very minor, paramaters,door interlocks,ect..not major? priced to sell !! might want to update with new control?
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Maegerle Bros. Limited Model - F-7-R |
---|
FOR SALE: Ad # 2750 , Year = , Make = Maegerle Bros. Limited , Model = F-7-R |
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 3 Axis Hydraulic Surface Grinder
|
Ad #
2750 |
Year:
|
|
Make:
| Maegerle Bros. Limited
|
Model:
| F-7-R
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 8000 lbs.
|
Dimension: L x W x H | 10' x 7' x 7' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 3 Axis
10 x 30 Includes permanent magnetic chuck 10 x 24 Standard pole Uses 12" diameter wheel Over the head wheel dresser Work light
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1979 Make - Okamoto Model - IGM-1E |
---|
FOR SALE: Ad # 2748 , Year = 1979 , Make = Okamoto , Model = IGM-1E |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Okamoto ID Grinder
|
Ad #
2748 |
Year:
| 1979
|
Make:
| Okamoto
|
Model:
| IGM-1E
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 7000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 20" X travel
14" swing diameter Universal head 6 jaw chuck Hydraulic Spark out
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1979 Make - Okamoto Model - IGM-1E |
---|
FOR SALE: Ad # 2748 , Year = 1979 , Make = Okamoto , Model = IGM-1E |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Okamoto ID Grinder
|
Ad #
2748 |
Year:
| 1979
|
Make:
| Okamoto
|
Model:
| IGM-1E
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 7000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 20" X travel
14" swing diameter Universal head 6 jaw chuck Hydraulic Spark out
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 11/85 Make - STUDER Model - S40-12 |
---|
FOR SALE: Ad # 885 , Year = 11/85 , Make = STUDER , Model = S40-12 |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: CNC UNIVERSAL O.D. GRINDER 10" X 24"
|
Ad #
885 |
Year:
| 11/85
|
Make:
| STUDER
|
Model:
| S40-12
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 6000lbs?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- UNIVERSAL SWIVEL HEAD; OD only
Two (2) OD Wheels FILTER SYSTEM; 24" CENTERS; APPROX 10" SWING; ONLY 7,462 HRS; COOLANT FILTRATION SYSTEM WITH SKIMMER REMOTE PENDANT CONTROL HYDRAULIC UNIVERSAL TABLE OD CNC got over 57K in it! new boards included!!
|
Electrical Description |
- 220/3;STUDER CNC CONTROL;MARPOSS E9 GAGI
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 11/85 Make - STUDER Model - S40-12 |
---|
FOR SALE: Ad # 885 , Year = 11/85 , Make = STUDER , Model = S40-12 |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: CNC UNIVERSAL O.D. GRINDER 10" X 24"
|
Ad #
885 |
Year:
| 11/85
|
Make:
| STUDER
|
Model:
| S40-12
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 6000lbs?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- UNIVERSAL SWIVEL HEAD; OD only
Two (2) OD Wheels FILTER SYSTEM; 24" CENTERS; APPROX 10" SWING; ONLY 7,462 HRS; COOLANT FILTRATION SYSTEM WITH SKIMMER REMOTE PENDANT CONTROL HYDRAULIC UNIVERSAL TABLE OD CNC got over 57K in it! new boards included!!
|
Electrical Description |
- 220/3;STUDER CNC CONTROL;MARPOSS E9 GAGI
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 10 matching ads. Now displaying the remaining 10 ads.
FOR SALE: Year - 1978 Make - Waterburry-Farrel Model - 1886-HD |
---|
FOR SALE: Ad # 14894 , Year = 1978 , Make = Waterburry-Farrel , Model = 1886-HD |
|
Category: Gear Hobbers
|
Capacity: gear hobber: spur gear
|
Ad #
14894 |
Year:
| 1978
|
Make:
| Waterburry-Farrel
|
Model:
| 1886-HD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 20,000?
|
Dimension: L x W x H | 8' x 6' x 9ft? |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Cleveland Hobbing Division-Waterbury/Farrel
Model#1886-HD gear hobber:spur gears was used to cut gear crankshaft-cutting spur gears HP: 7.5hp HOB ratio: 1:4 machine index const: 12 note:have electrical diagrams and misc drawings machine lead const: 3
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1977 Make - Pfauter Model - PA-300 |
---|
FOR SALE: Ad # 14833 , Year = 1977 , Make = Pfauter , Model = PA-300 |
|
Category: Gear Hobbers
|
Capacity: Max. Hob Admissible-Diameter6.30” -Length8.60”
|
Ad #
14833 |
Year:
| 1977
|
Make:
| Pfauter
|
Model:
| PA-300
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 15000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Pfauter PA-300 gear Hobber
std. mfg specs below please verify actual machine.. Pfauter Model PA 300 Gear Hobber Diameter of Work Table11.811” Diameter of Table Bore3.149” Max. Hob Admissible -Diameter6.30” -Length8.60” Diameter of Hob Arbors1.25, 2” Center Distance between Hob & Workpeice -Max. Distance10.40” -Min. Distance1.20” Taper for Hob Arbors5MT Max. Hob Displacement6.70” Hob Speed (adjustable in steps)125-250 RPM Axial Feed (infinitely variable).04 to .27 in/wr. Machine Size226 x 139 x117” Weight17,200lbs. Specifications set 2 std. mfg specs verify actual machines.... Maximum Diameter of Workpiece: 14" Maximum DP/Module: 3.175 DP Maximum Hob Slide Travel: 6.7" Maximum Helix Angle: 60 Degrees Center Distance Hob to Workpiece: 1.2" (Minimum) 10.4" (Maximum) . Worktable Diameter: 11.8" Worktable Bore Diameter: 3.149" Hob Diameter: 6.3" (Max) Hob Length: 8.6" (Max) Hob Shifting Travel (Intermittent Diagonal): 6.5" (Max) Hob Arbor Taper: No. 5 Morse Minimum Number of Teeth that can be Hobbed: 3 Hob Speed (Infinitely Variable by P.I.V.): 125 - 250 RPM Axial, Radial & Tangential Feeds (Infinitely Variable) .
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Illitron Model - 3912A-3C |
---|
FOR SALE: Ad # 14830 , Year = ? , Make = Illitron , Model = 3912A-3C |
|
Category: Gear Testing Machinery
|
Capacity: helical lead measuring machine-gear tester
|
Ad #
14830 |
Year:
| ?
|
Make:
| Illitron
|
Model:
| 3912A-3C
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Illitron: gear tester #3912A-3C helical lead measuring machine w/Recorder Pen, Paper Drive, Pick-Up Unit
std.mfg specs below-please verify actual machine No. 3912A-3C, ITW, Gear Tesster, Recorder Pen, Paper Drive, Pick-Up Unit Ref: 5222 EQUIPPED WITH: Model #1607-9 Illinois Electronic Recorder; Giving A Selection Of 200, 250, 400, 500, 800, And 1000 Magnification Pick-Up Unit Recorder Pen, Paper Drive Headstock & Tailstock With Center Vernac Optical Setting Device CATALOG SPECIFICATIONS: Nominal Capacity .................................. 12" Maximum Checking Diameter Of Gear ................. 14.25" Maximum Table Travel With Sine Bar ................ 8" Maximum Angular Rotation With Sine At 90 Degrees .. 140 Degrees Maximum Distance Between Centers .................. 28" Maximum Work From Headstock Center ................ 18"
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Illitron Model - 3912A-3C |
---|
FOR SALE: Ad # 14830 , Year = ? , Make = Illitron , Model = 3912A-3C |
|
Category: Gear Testing Machinery
|
Capacity: helical lead measuring machine-gear tester
|
Ad #
14830 |
Year:
| ?
|
Make:
| Illitron
|
Model:
| 3912A-3C
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Illitron: gear tester #3912A-3C helical lead measuring machine w/Recorder Pen, Paper Drive, Pick-Up Unit
std.mfg specs below-please verify actual machine No. 3912A-3C, ITW, Gear Tesster, Recorder Pen, Paper Drive, Pick-Up Unit Ref: 5222 EQUIPPED WITH: Model #1607-9 Illinois Electronic Recorder; Giving A Selection Of 200, 250, 400, 500, 800, And 1000 Magnification Pick-Up Unit Recorder Pen, Paper Drive Headstock & Tailstock With Center Vernac Optical Setting Device CATALOG SPECIFICATIONS: Nominal Capacity .................................. 12" Maximum Checking Diameter Of Gear ................. 14.25" Maximum Table Travel With Sine Bar ................ 8" Maximum Angular Rotation With Sine At 90 Degrees .. 140 Degrees Maximum Distance Between Centers .................. 28" Maximum Work From Headstock Center ................ 18"
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Illitron Model - 3412B-30 |
---|
FOR SALE: Ad # 14831 , Year = ? , Make = Illitron , Model = 3412B-30 |
|
Category: Gear Testing Machinery
|
Capacity: variable involute measuring system
|
Ad #
14831 |
Year:
| ?
|
Make:
| Illitron
|
Model:
| 3412B-30
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 42" x 40" x 84" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Illitron:#3412B-30variable involute measuring system
std.mfg specs below please verify actual machine pictured Illitron 3412B Variable Involute Profile Measuring Instrument Specifications Stock Number 1166509 Model 3412B Age 1984 Max Gear Diameter 12" Distance Between Centers 30" Max Vertical Indicator Travel 9" Max Apron Travel 4" Max Cross Travel 6" Max Degree of Roll 60° Overall Dimensions 42" x 40" x 84" H Overall Weight 2250 lb Equipped With Recorder Model 1607, S/N 11678 Digital Readout Model D-91-018-5
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Illitron Model - 3412B-30 |
---|
FOR SALE: Ad # 14831 , Year = ? , Make = Illitron , Model = 3412B-30 |
|
Category: Gear Testing Machinery
|
Capacity: variable involute measuring system
|
Ad #
14831 |
Year:
| ?
|
Make:
| Illitron
|
Model:
| 3412B-30
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 42" x 40" x 84" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Illitron:#3412B-30variable involute measuring system
std.mfg specs below please verify actual machine pictured Illitron 3412B Variable Involute Profile Measuring Instrument Specifications Stock Number 1166509 Model 3412B Age 1984 Max Gear Diameter 12" Distance Between Centers 30" Max Vertical Indicator Travel 9" Max Apron Travel 4" Max Cross Travel 6" Max Degree of Roll 60° Overall Dimensions 42" x 40" x 84" H Overall Weight 2250 lb Equipped With Recorder Model 1607, S/N 11678 Digital Readout Model D-91-018-5
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1965 Make - LEES-BRADNER Model - 7HD |
---|
FOR SALE: Ad # 891 , Year = 1965 , Make = LEES-BRADNER , Model = 7HD |
|
Category: Gear Hobbers
|
Capacity: AUTOMATIC UNIVERSAL GEAR HOBBING MACHINE
|
Ad #
891 |
Year:
| 1965
|
Make:
| LEES-BRADNER
|
Model:
| 7HD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 10,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- LEES-BRADNER # 7HD:gear HOBBER
laboratory machine, not worn out will do long shafts... RATIO 3:1; COLUMN # 1; WORM RATIO 30:1; 400RPM;UNIVERSAL AUTOMATIC; Std mfg specs below-please verify actual machine.. Specification Description Max. Pitch Diameter 8 W/2" Hob Max. Pitch Diameter 7 W/3" Hob Max. Face Width 10" Maximum Helix Angle 45 Degrees Maximum Hob OD 4" Maximum Hob Length 4" Minimum Number of Teeth Cut 3 Maximum DP 4 Axial Travel 12" Hob to Work Spindle Face Maximum 15-3/8" Hob to Work Spindle Face Minimum 3-3/8" Hob to Work Minimum 1/2" Floor Space 66" x 64" x 96" Height 79.5" Approximate Weight 10,000 lbs
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1970 Make - MICHIGAN TOOL Model - 870A |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 888 , Year = 1970 , Make = MICHIGAN TOOL , Model = 870A |
|
Category: Gear Hobbers
|
Capacity: UNDERPASS GEAR FINISHER-SHAVER FINISHER
|
Ad #
888 |
Year:
| 1970
|
Make:
| MICHIGAN TOOL
|
Model:
| 870A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - CROSS Model - # 65 |
---|
FOR SALE: Ad # 887 , Year = , Make = CROSS , Model = # 65 |
|
Category: Gear Hobbers
|
Capacity: GEAR TOOTH CHAMPER -ROUNDER
|
Ad #
887 |
Year:
|
|
Make:
| CROSS
|
Model:
| # 65
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
1
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 10" DIA TABLE ; CHANGE GEARS;
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1965 Make - LEES-BRADNER Model - 7HD |
---|
FOR SALE: Ad # 891 , Year = 1965 , Make = LEES-BRADNER , Model = 7HD |
|
Category: Gear Hobbers
|
Capacity: AUTOMATIC UNIVERSAL GEAR HOBBING MACHINE
|
Ad #
891 |
Year:
| 1965
|
Make:
| LEES-BRADNER
|
Model:
| 7HD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 10,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- LEES-BRADNER # 7HD:gear HOBBER
laboratory machine, not worn out will do long shafts... RATIO 3:1; COLUMN # 1; WORM RATIO 30:1; 400RPM;UNIVERSAL AUTOMATIC; Std mfg specs below-please verify actual machine.. Specification Description Max. Pitch Diameter 8 W/2" Hob Max. Pitch Diameter 7 W/3" Hob Max. Face Width 10" Maximum Helix Angle 45 Degrees Maximum Hob OD 4" Maximum Hob Length 4" Minimum Number of Teeth Cut 3 Maximum DP 4 Axial Travel 12" Hob to Work Spindle Face Maximum 15-3/8" Hob to Work Spindle Face Minimum 3-3/8" Hob to Work Minimum 1/2" Floor Space 66" x 64" x 96" Height 79.5" Approximate Weight 10,000 lbs
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - ? Make - Winona Van Norman Model - 808730 |
---|
FOR SALE: Ad # 14832 , Year = ? , Make = Winona Van Norman , Model = 808730 |
|
Category: Engine & Machine Shop Equip.
|
Capacity: crankshaft straightner unit
|
Ad #
14832 |
Year:
| ?
|
Make:
| Winona Van Norman
|
Model:
| 808730
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Winona Van Norman#808730 crankshaft straightning
std mfg specs below-please verify actual machine Model 808730 60 inch Crankshaft straightening bench Maximum Crankshaft Size it will handle is 82" Long X 22" in Diameter. Distance
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Winona Van Norman Model - 808730 |
---|
FOR SALE: Ad # 14832 , Year = ? , Make = Winona Van Norman , Model = 808730 |
|
Category: Engine & Machine Shop Equip.
|
Capacity: crankshaft straightner unit
|
Ad #
14832 |
Year:
| ?
|
Make:
| Winona Van Norman
|
Model:
| 808730
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Winona Van Norman#808730 crankshaft straightning
std mfg specs below-please verify actual machine Model 808730 60 inch Crankshaft straightening bench Maximum Crankshaft Size it will handle is 82" Long X 22" in Diameter. Distance
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1992? Make - Magnaflux Model - Zyglo # ZD-37 |
---|
FOR SALE: Ad # 14829 , Year = 1992? , Make = Magnaflux , Model = Zyglo # ZD-37 |
|
Category: Miscellaneous
|
Capacity: Zyglo inspection machine for Aluminium
|
Ad #
14829 |
Year:
| 1992?
|
Make:
| Magnaflux
|
Model:
| Zyglo # ZD-37
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | 7' x 4' x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Magnaflux Zyglo # ZD-37 florecent penetrant inspection machine with ZB-103 black light for Aluminuim
std mfg specs below-please verify actual machines Zyglo® ZL-37 Post Emulsifiable Fluorescent Penetrant ZL-37’s formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water. Zyglo® ZL-37 fluoresces a bright greenish-yellow under ultraviolet radiation. Use of an ultraviolet light source with a peak wavelength of 365 nanometers, such as the MAGNAFLUX® ZB-100F fan-cooled black light, is recommended. Zyglo® ZL-37 penetrant meets OSHA requirements for Class III B liquids due to its high flash point and can be used in open dip tanks. Specifications Compliance: AMS-2644,ASTM E 1417,MIL-STD-271, ASME B & PV Code, Sec. V, MIL-STD-2132, AECL, ASTM E 165, Boeing PS-21202 Part Number and Container Size: ■01-3188-78: Case of 12 Aerosol Cans 01-3188-40: 5 Gallon Pail ■01-3188-30: 20 Gallon Drum ■01-3188-45: 55 Gallon Drum Applications: Zyglo® ZL-37 is ideal for titanium turbine components, investment castings and other high stress critical components where detection of fine, tight discontinuities is required. Classification: Type 1, Method B Penetrant when using ZE-4E emulsifier. Type 1, Method D Penetrant when using ZR-10B (20%) remover. Sensitivity Level: Level 4 - Ultra-High Sensitivity UNIT MADE OF 1 CONTINUOUS BENCH WITH 3 SEPARATE TANKS, HEATING UNIT, FAN, AND FLUORESCENT LIGHTING UNIT. THIS EQUIPMENT USES FLUORESCENT LIQUID AND BLACK LIGHTS TO INSPECT SURFACES FOR PENETRATIONS ,not supplied. DIMENSIONS 70" LONG X 28" DEEP X 60" HIGH MAGNAFLUX MAGNETIC PARTICLE INSPECTION SYSTEM INCLUDES: - BENCH - P-1500 PORTABLE POWER PACK - CABLES AND ACCESSORIES DIMENSIONS 51" LONG X 24" DEEP X 52" HIGH THIS UNIT USES STRONG ELECTRICAL CURRENT TO CREATE MAGNETIC FIELDS THAT DRAW PARTICLES INTO CRACKS OF SURFACES.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1993 Make - Cambridge Instriments Model - Stereoscan 360 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 1299 , Year = 1993 , Make = Cambridge Instriments , Model = Stereoscan 360 |
|
Category: Microscopes
|
Capacity: High Tech microscope 300,000 x
|
Ad #
1299 |
Year:
| 1993
|
Make:
| Cambridge Instriments
|
Model:
| Stereoscan 360
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- camera input, tv monitor, 2.5Nm resolution, 10x to 300,000x
Auto Functions: Auto focus, Auto gun alignment, Auto Stigmation Floppy disk, images displayed on high resolution and monochrome monitor. Track ball, joystick, full alphanumeric keyboard. Vaccum Speciment Chamber / Internal: 270mm W x 270mm H High Resolution camera record unit 2.5 Newton meters = resolution Variable magnification from x10 to x300,000 Calibrated in Newton meters, um or nm 68,000 cpu bus
|
Electrical Description |
- 40Kva,220vac;control 68000 series
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1993 Make - Cambridge Instriments Model - Stereoscan 360 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 1299 , Year = 1993 , Make = Cambridge Instriments , Model = Stereoscan 360 |
|
Category: Microscopes
|
Capacity: High Tech microscope 300,000 x
|
Ad #
1299 |
Year:
| 1993
|
Make:
| Cambridge Instriments
|
Model:
| Stereoscan 360
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
1
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- camera input, tv monitor, 2.5Nm resolution, 10x to 300,000x
Auto Functions: Auto focus, Auto gun alignment, Auto Stigmation Floppy disk, images displayed on high resolution and monochrome monitor. Track ball, joystick, full alphanumeric keyboard. Vaccum Speciment Chamber / Internal: 270mm W x 270mm H High Resolution camera record unit 2.5 Newton meters = resolution Variable magnification from x10 to x300,000 Calibrated in Newton meters, um or nm 68,000 cpu bus
|
Electrical Description |
- 40Kva,220vac;control 68000 series
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|