User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 2001 Make - Stama Model - MC 331 Twin Spindle |
---|
FOR SALE: Ad # 15666 , Year = 2001 , Make = Stama , Model = MC 331 Twin Spindle |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: x 31.49" y 15.75" z 13.96"
|
Ad #
15666 |
Year:
| 2001
|
Make:
| Stama
|
Model:
| MC 331 Twin Spindle
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Stama MC 331 Twin Spindle
Fanuc 18i-M Controller X Axis Travel: 31.49” Y Axis Travel: 15.75” Z Axis Travel: 13.96” Indexer Side A: Peiseler Indexer A Model # AWUP-160 Indexer A Serial # 23979 Indexer Side B: Peiseler Indexer B Model # AWUP-160 Indexer B Serial # 23953 Coolant: Blechtechnic Model KMB 900L CLT Serial # G001 061-200 CLT Pressure: 1000 PSI TSC Tool Taper: CAT-40 Tool Capacity: 21 Per Spindle Control: 18Im Spindle RPM: 10500
|
|
|
FOR SALE: Year - 2005 Make - Mori Seiki Model - NV 5000 |
---|
FOR SALE: Ad # 15662 , Year = 2005 , Make = Mori Seiki , Model = NV 5000 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: x 31.5" y 20.1" z 20.1"
|
Ad #
15662 |
Year:
| 2005
|
Make:
| Mori Seiki
|
Model:
| NV 5000
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 15,800
|
Dimension: L x W x H | 120" x 99" x 115" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 2005 Mori Seiki NV 5000-Vertical Machining Center
mori seiki : MSX-501 Control 40 Taper spindle 1000 PSI hi pressure Coolant X-Axis Travel (Table Cross): 31.5” Y-Axis Travel (Spindle-Head Vert.): 20.1” Z-Axis Travel: 20.1” With Dual 5 Axis Nikken Trunnion Spindle Speeds: 12,000 RPM
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 1974 Make - Devlieg Model - Spiramatic 4K-60 |
---|
FOR SALE: Ad # 15665 , Year = 1974 , Make = Devlieg , Model = Spiramatic 4K-60 |
|
Category: Horizontal Boring Mills
|
Capacity: table size: 40" x 60"
|
Ad #
15665 |
Year:
| 1974
|
Make:
| Devlieg
|
Model:
| Spiramatic 4K-60
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: | 36,500
|
Dimension: L x W x H | 192" x 166" x 140" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 4K-60 Devlieg Spiramatic
2 axis CNC retrofit Spindle Diameter: 4” Spindle Nose Taper: #50 Vertical Spindle Travel: 48” Horizontal Spindle Travel: 20” Spindle Speeds: 14-1800 RPM, 16 Speeds Spindle Feeds: .0013 - .167 IPR Table Size: 40” X 60” Longitudinal Table Travel: 60” Retraction: 20” Milling Feed Rates: .1-150 IPM Rapid Traverse Rates: 150 IPM
|
|
|
FOR SALE: Year - ? Make - Devlieg Model - Spiramatic 43H-72 |
---|
FOR SALE: Ad # 15663 , Year = ? , Make = Devlieg , Model = Spiramatic 43H-72 |
|
Category: Horizontal Boring Mills
|
Capacity: x 72" y 52"
|
Ad #
15663 |
Year:
| ?
|
Make:
| Devlieg
|
Model:
| Spiramatic 43H-72
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 43H-72 Devlieg Spiramatic Boring Mill
Table Area: 35X72 X-Axis Travel (Table Cross): 72” Y-Axis Travel (Spindle-Head Vert.): 52” Spindle Bar In-Out Travel: 22” Table Retraction: 15.5” Taper in Spindle: NMTB 50 Spindle Speeds: 21 - 1000
|
|
|
FOR SALE: Year - 1960's Make - Herbert Devlieg Model - 3H48 Spiramatic Jigmil |
---|
FOR SALE: Ad # 15667 , Year = 1960's , Make = Herbert Devlieg , Model = 3H48 Spiramatic Jigmil |
|
Category: Horizontal Boring Mills
|
Capacity: x 48" y 36"
|
Ad #
15667 |
Year:
| 1960's
|
Make:
| Herbert Devlieg
|
Model:
| 3H48 Spiramatic Jigmil
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 3H48 Herbert Devlieg
Spiramatic Jigmil Type DX 401 X-Axis Travel (Table Cross): 48” Y-Axis Travel (Spindle-Head Vert.): 36” Spindle Bar In-Out Travel: 16” Spindle Diameter – 3” Work Table – 35” X 48” Table Travel X-Axis – 48” Head Stock Vertical Travel Y-Axis – 48” Table Retraction Z- Axis – 16” Spindle Travel W- Axis – 16” Spindle Speeds – 25- 1200 rpm Spindle Taper – No. 40 NMTB Feed Ranges – 0.002 – 0.024 IPR Motor – 10 HP Automatic Depth Control Power Tool-Locking Aluminum outrigger missing on one side
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1994 Make - Okamoto Model - OGM 12-24U |
---|
FOR SALE: Ad # 15661 , Year = 1994 , Make = Okamoto , Model = OGM 12-24U |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: ID/OD :Swing over table: 12.59"
|
Ad #
15661 |
Year:
| 1994
|
Make:
| Okamoto
|
Model:
| OGM 12-24U
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 7750
|
Dimension: L x W x H | 136" x 73.22" 65.98" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 1994 Okamoto OGM 12-24U ID/OD Cylindrical Grinder
Fanuc 21-GA Control Controlled axes: X & Z # of Simultaneously controlled axes: 1 Axes Least input increment: X .00001 & Y .00001 Interpolation: Positioning Max programmable dimensions: 8 digits Capacity Swing over table: 12.59” Distance between centers: 23.62” Max dia. To ground: 11.81” Max weight between centers: 330 lbs (center work) Grinding Wheel Size: 14” x 1.5” x 5” (O.D. X Width X I.D.) Speed: 1767/1996 rpm (belt pully) Max peripheral speed: 98.42 (ft/sec) Wheel Head X Axis Travel: 11.81” Swivel angle: 30 + or – Least travel increment: .00001” Continuous feed rate: .00001 ~ 157.48 (in/Min) Rapid feed rate: 157.48 (in/Min) Table Z Axis travel: 29.52” Swivel angle 3 ~ 10 Least travel increment: .00001 Continuous feed rate: .00001 ~ 157.48 (in/min) Rapid feed rate: 393.70 (in/min) Work Head Spindle type: for dead-live center combined use Center taper: Mt no. 4 Spindle through hole dia.: .68” Spindle speed: 10 ~ 500 RPM Swivel angle: 30~90 Deg. Tail stock Spindle stroke: 1.18” Center taper: MT no. 4 std mfg specs below--verify actual machine Capacity: Swing over table: 12.59" Distance between centers: 23.62" Max dia. to ground: 11.81" Max weight between centers: 330 lbs (center work) Grinding Wheel: Size: 14" x 1.5" x 5" (O.D. X WIDTH X I.D.) Speed: 1767/1996 rpm (belt pully) Max peripheral speed: 98.42 (ft/sec) Wheel Head: X-Axis travel: 11.81" Swivel angle: 30 + or - Least travel increment: .0001" Continuous feed rate: .0001 ~ 157.48 (in/Min) Rapid feed rate: 157.48 (in/Min) Table: Z Axis travel: 29.52" Swivel angle: 3 ~- 10 Least travel increment: .00001 Continuous feed rate: .00001 ~ 393.70 (in/min) Rapid feed rate: 393.70 (in/min) Work Head: Spindle type: for dead-live center combined use Center taper: Mt no. 4 Spindle through hole dia.: .68" Spindle speed: 10 ~ 500 RPM Swivel angle: 30~90 Deg. Tail stock: Spindle stroke: 1.18" Center taper: MT no. 4 Motors: (HP) Wrinding wheel spindle: 7.3 Workhead spindle: 1.0 ac servo motor Table feed: 1.2 ac servo motor wheelhead feed: 1.2 ac servo motor Lubrication pump: .004 Coolant pump: .33 Magnetic seperator .03 Tank Cap: Lubrication oil: .79 gal Collant tank: 31.70 In" Machine Space: 136.22" x 73.22" x 65.98" (W x Depth x H) Weight: 7,714 lbs Control: Fanuc 21-GA # of controlled axes: X & Z # of Simultaneously controlled axes: 1 Axes Least input increment: X .00001 & Y .00001 Interpolation: Positioning Max programmable dimensions: 8 digits.
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ? Make - Lapointe Model - |
---|
FOR SALE: Ad # 15664 , Year = ? , Make = Lapointe , Model = |
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity:
|
Ad #
15664 |
Year:
| ?
|
Make:
| Lapointe
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- LaPointe Horizontal Key Broach
30 Ton with 48” travel
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ? Make - Surftran Model - C-250 |
---|
FOR SALE: Ad # 15660 , Year = ? , Make = Surftran , Model = C-250 |
|
Category: Misc. Finishing Equip.
|
Capacity: 115 cycles per hour
|
Ad #
15660 |
Year:
| ?
|
Make:
| Surftran
|
Model:
| C-250
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Surftran Thermal Deburr C-250
Surftran 250 Ton Thermal Energy Method (TEM) Thermal Parts Deburring Machine Surftran Model C-250 TEM (Thermal Energy Method) six station, automated parts deburring machine for mass production removal of internal burrs, external burrs, flash removal in casting, forgings and molded parts. Also used for edge preparation. Number of Blast Chambers: 6 Chamber Diameter: 7” Chamber Height: 6 “ Chamber Clamping Force: 250 Tons Normal Rate Capacity: 115 Cycles per hour Maximum Charge Pressure: 160 psi
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|