|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1952 Make - Heyligenstaedt Model - 154543 |
|---|
| FOR SALE: Ad # 11302 , Year = 1952 , Make = Heyligenstaedt , Model = 154543 | 
|
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 24" swing bed x 90"centers
|
| Ad #
11302 |
| Year:
| 1952
|
| Make:
| Heyligenstaedt
|
| Model:
| 154543
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,ooo
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- SWING ...24" over bed, 22 over cross slide(low profile)
CENTER distance
90
THRU HOLE................... 3.5
EQUIPPED WITH:
12"-3 Jaw Chuck,
22"-4 Jaw Chuck,
Quick Change Tool Post,
Lube System, Tail Stock, Steady Rest(6"),follow rest
Threading- inch/metric
5MT tailstock
travel dial on bed
rapid traverse
no gap in bed
25HP
very heavy duty machine in great condition
completely rebuilt in the 90's
ways look great
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1987 Make - Chevalier Model - Falcon 2040B |
|---|
| FOR SALE: Ad # 11512 , Year = 1987 , Make = Chevalier , Model = Falcon 2040B |
|
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 13 x 54 table
|
| Ad #
11512 |
| Year:
| 1987
|
| Make:
| Chevalier
|
| Model:
| Falcon 2040B
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 5500
|
| Dimension: L x W x H | 6 x 6 x 8 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Chevalier 2040B-3 axis cnc bed mill
13 x 54 table
travels: 20" x 40"
Control: Autocon delta 40M
floppy drive, RS-232 port
VS head 3 HP-bridgeport style
MPG remote hand wheel
cat 40 sindle taper
manual quill not table feeds
all manuals
1 owner
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1958 Make - Scharmann Model - WB |
|---|
| FOR SALE: Ad # 11300 , Year = 1958 , Make = Scharmann , Model = WB |
|
|
Category: Horizontal Boring Mills
|
Capacity: TABLE SIZE......... 51 x 56
|
| Ad #
11300 |
| Year:
| 1958
|
| Make:
| Scharmann
|
| Model:
| WB
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 60,000
|
| Dimension: L x W x H | 20 ft x 6 x 13ft H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- TABLE SIZE............ 51 x 56
TRAVELS: X-AXIS....58
Y-AXIS.... 60
Quill Z-AXIS..... 36
DRO ............................... Accurite-3 axis
TAPER......................... Morris Taper 5
SPINDLE SPEEDS........ 4-840
HP...................... 20
60 amp service
table cap: 10,000 rotary
completly rebuilt in 90's
lincoln lube system
Spindle 5
ABS Tooling
Has Hydraulic Switching
No tailstock
25" face Plate
RPM- 4-840
manual lever clamps replaced w hyd. clamping
Rigging fee to load : $ TBD
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1988 Make - Unisig-Kansai Model - KSG-1000NC |
|---|
| FOR SALE: Ad # 11299 , Year = 1988 , Make = Unisig-Kansai , Model = KSG-1000NC |
|
|
Category: Gun / Deep Hole Drills
|
Capacity: 40" stroke--3/16"-1" cap
|
| Ad #
11299 |
| Year:
| 1988
|
| Make:
| Unisig-Kansai
|
| Model:
| KSG-1000NC
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 13,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Gun drill unit
40" stroke--3/16"-1" cap
capacity on Table. 2,200 Lbs
Window 12" x 27"
27.4" Horiz travel
9.9" vert travel
RPM max 6600
fanuc om control
Drill 1/8min to 1"max at 40"deep
Year 1985
Stroke 40"
HP 15
chip conveyor
magnetic seperator & bag filter system
3700 hrs
was over 250K new
machine has board out in control-will cost 3-5K to get up again..
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1997 Make - Chevalier Model - FSG1224AD |
|---|
| FOR SALE: Ad # 11513 , Year = 1997 , Make = Chevalier , Model = FSG1224AD |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 12 x 24 w/ incremental downfeed
|
| Ad #
11513 |
| Year:
| 1997
|
| Make:
| Chevalier
|
| Model:
| FSG1224AD
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 6000
|
| Dimension: L x W x H | 7 x 5 x 5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Chevalier FSG1224 surface grinder
wheel dresser-over the wheel type included
inc down feed on wheel
coolant tank /paper filter sys
electro mag chuck 12 x 24
wheel size 14 x 2
all manuals
rigging/loading fee $1000.00
note can skate to door and load onto rollback at N/C
Std factory specs below-please verify
CHEVALIER AUTOMATIC SURFACE GRINDER MODEL # FSG-1224AD
TECHNICAL SPECIFICATIONS:
CURRENTLY WIRED FOR 220VAC , 3 PHASE , 60HZ
SPINDLE DRIVE RATING: 5 HP (3.7kW), 1750 RPM(60hz), 1450RPM(50hz)
TOTAL POWER RATING: APPROX. 7.4kW
STANDARD GRINDING WHEEL:WHEEL DIAMETER - 14" WIDTH - 2" BORE - 5"
TABLE SIZE - 11-3/4" x 23-5/8" (300mm x 600mm)
MAX. DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE - 24-3/4" (630mm)
STANDARD MAGNETIC CHUCK SIZE - 11-3/4" x 23-5/8" (300mm x 600mm)
AUTOMATIC LONGITUDINAL MOVEMENT- VARIABLE SPEED HYDRAULIC CYLINDER DRIVE
AUTOMATIC CROSS TRANSVERSE - VARIABLE SPEED DC MOTOR DRIVE
AUTOMATIC WHEELHEAD VERTICAL INFEED - SOLENOID DRIVEN
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
