User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2006 Make - JET Model - GH-1440ZX |
---|
FOR SALE: Ad # 7799 , Year = 2006 , Make = JET , Model = GH-1440ZX |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" x 40" Gap Bed Precision Lathe with 3-1/8" Spindle Bore
|
Ad #
7799 |
Year:
| 2006
|
Make:
| JET
|
Model:
| GH-1440ZX
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 5,187 lbs
|
Dimension: L x W x H | 97-1/2" x 40" x 46-7/8" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Distance Between Centers: 40"
Swing Over Bed: 14" Swing Over Cross Slide: 7-5/8" Swing Over Gap (Bed Removed): 23-5/8" Length Through Gap: 12-1/4" Spindle Bore: 3-1/8" Spindle Mount: D1-8 Spindle Speed Range: 42" - 1,800 rpm in 12 Stages Spindle Drive: Gear Driven Tailstock Quick Change Tool Post
|
Electrical Description |
|
Comments: |
- Includes:
10" 3-Jaw Chuck 13" 4-Jaw Chuck Steady Rest Follow rest
misc. tooling
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2006 Make - VICTOR Model - JF-2VS |
---|
FOR SALE: Ad # 7800 , Year = 2006 , Make = VICTOR , Model = JF-2VS |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49" VICTOR JF-2VS Mill with DRO and Power Feed in "X"
|
Ad #
7800 |
Year:
| 2006
|
Make:
| VICTOR
|
Model:
| JF-2VS
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 2,050 lbs
|
Dimension: L x W x H | 55” x 54” x 74” |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table size: 9” x 49”
Acu-Rite 2-Axis DRO Longitudinal travel (X-axis): 35” / 32” with Powerfeed Cross travel (Y-axis): 12” Vertical travel of knee: 16” Distance from spindle nose to table: 18.5” Slide ways: Dovetail SPINDLE Spindle motor: 3 HP 3 Phase Spindle taper: R8 Spindle speeds: 60 ~ 4,200 rpm Quill travel: 5” Quill feeds: 0.0017” (0.04 mm), 0.0032” (0.08 mm), 0.0053” (0.13 mm) Quill diameter: 3-3/8” Swiveling angle of head: 90º Head inward & outward: 45º
|
Electrical Description |
|
Comments: |
- Had very light usage.
Includes: Vise, collet set and some other misc. tooling
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2006 Make - Grob Model - 4V-18 |
---|
FOR SALE: Ad # 7801 , Year = 2006 , Make = Grob , Model = 4V-18 |
|
Category: Vertical Band Saws
|
Capacity: 18" Grob Vertical Bandsaw with Welder
|
Ad #
7801 |
Year:
| 2006
|
Make:
| Grob
|
Model:
| 4V-18
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Throat: 18"
Table Size: 28" x 24-1/2" Table Tilt 10 deg - 0 - 45 deg Variable Speed Drive Built-in Welder Unit
|
Electrical Description |
|
Comments: |
- Includes some extra saw blades - (3 or 4)
Used very lightly and in excellent condition
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Doall Model - Hydra |
---|
FOR SALE: Ad # 7718 , Year = , Make = Doall , Model = Hydra |
|
Category: Surface Grinders
|
Capacity: 6" x 18" Surface Grinder with Magnetic Chuck
|
Ad #
7718 |
Year:
|
|
Make:
| Doall
|
Model:
| Hydra
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
Comments: |
- Machine was prepped for paint.
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Beverly Model - B-2 |
---|
FOR SALE: Ad # 8509 , Year = , Make = Beverly , Model = B-2 |
|
Category: Hand Operated Shears
|
Capacity: B-2 , 10ga mild steel, 14ga. SS
|
Ad #
8509 |
Year:
|
|
Make:
| Beverly
|
Model:
| B-2
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can skid machine
|
Weight: | 45
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 10ga mild steel
14ga stainless length of cut 3-1/8" includes stand
|
Comments: |
- Also will sell bench grinder-,make offer !like new both !
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1998 Make - Roper Whitney Model - 816 |
---|
FOR SALE: Ad # 7717 , Year = 1998 , Make = Roper Whitney , Model = 816 |
|
Category: Straight Apron Brakes
|
Capacity:
|
Ad #
7717 |
Year:
| 1998
|
Make:
| Roper Whitney
|
Model:
| 816
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
|
Comments: |
- Blades Still in really good condition
|
|
|
FOR SALE: Year - 1986 Make - ENCO Model - 130-5060 |
---|
FOR SALE: Ad # 7715 , Year = 1986 , Make = ENCO , Model = 130-5060 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 48" x 16ga ENCO Pan and Box Brake
|
Ad #
7715 |
Year:
| 1986
|
Make:
| ENCO
|
Model:
| 130-5060
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Capacity: 16 ga
Length: 48" Includes 14 Fingers: 3 x 2" 1 x 2-1/8" 6 x 3" 4 x 4"
Machine mounted on a stand
|
Comments: |
- In a Race Shop - machine has had very little use and is well looked after
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - Make - Miller Model - EconoTig |
---|
FOR SALE: Ad # 7807 , Year = , Make = Miller , Model = EconoTig |
|
Category: Mig & Tig Arc Welders
|
Capacity: Miller AC/DC Econotig TIG Welder System
|
Ad #
7807 |
Year:
|
|
Make:
| Miller
|
Model:
| EconoTig
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 140 lbs
|
Dimension: L x W x H | 18" x 13" x 25" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Power source with primary cord (plug provided on 230 volt model)
12-1/2 ft TIG torch with backcap, ceramic gas cup, 3/32 in collet and collet body, and 2% thoriated tungsten. International-style quick torch disconnect 12 ft work cable and clamp 15 ft Stick electrode holder 20 ft RFCS-14 foot-operated remote control Gas regulator, flowmeter and 12-1/2 ft shielding gas hose
|
Electrical Description |
|
Comments: |
- The Econotig is an excellent choice for novice users and hobbyists, but don't underestimate this machine's power. It has the strength and stamina to handle a wide variety of light-industrial welding tasks. Yet it operates off single-phase power.
The Econotig is a complete AC/DC, TIG and Stick welding package. All you need is a bottle of shielding gas and some Stick electrodes and you're ready to start welding. It's ideal for farmers, ranchers, hobbyists, moonlighters - anyone who requires the versatility to handle Stick work, plus the finesse available only from the TIG process.
In the TIG mode, the Econotig offers superior performance: 18 gauge to 3/16 in (1.2 to 4.8 mm) steel and stainless steel; 14 gauge to 3/16 in (1.8 to 4.8 mm) aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8 in (2.4 and 3.2 mm) electrodes.
|
|
|
FOR SALE: Year - Make - Miller Model - MillerMatic 175 |
---|
FOR SALE: Ad # 7805 , Year = , Make = Miller , Model = MillerMatic 175 |
|
Category: Mig & Tig Arc Welders
|
Capacity: 175 Amp MIG Portable Wire Welder
|
Ad #
7805 |
Year:
|
|
Make:
| Miller
|
Model:
| MillerMatic 175
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- All-in-one wire welding package welds 24 gauge - 1/4 in (0.8 - 6.4 mm) mild steel.
Mounted on castors for ease of movement.
Amp Range: 20 - 175 Amp Voltage: 20 Volts Rated Amps: 130 amps Wire Feed Range: 10 - 100 Voltage Output: 10 Steps
|
Electrical Description |
|
Comments: |
- Infinite voltage control with wire feed speed tracking provides broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted.
Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and calibrated, spring-loaded tension arm designed to make setup easier and faster.
Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires.
"Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
Built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled. Makes unit safer, and is easier to position torch to work before starting weld.
Thermal overload protection shuts down the unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
|
|
|
FOR SALE: Year - Make - Miller Model - SyncroWave 250 DX |
---|
FOR SALE: Ad # 7808 , Year = , Make = Miller , Model = SyncroWave 250 DX |
|
Category: Mig & Tig Arc Welders
|
Capacity: Miller TIG Welder Typw SyncroWave 250DX
|
Ad #
7808 |
Year:
|
|
Make:
| Miller
|
Model:
| SyncroWave 250 DX
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 378 lbs
|
Dimension: L x W x H | 33" x 33" x 25" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Miller TIG Welder - Syncrowave 250 DX AC/DC TIG/Stick
Industry standard - Syncrowave 250DX has proven itself time and time again in the most demanding applications. Its industrial design and construction ensure reliable operation for years to come.
Processes AC/DC TIG (GTAW) Pulsed TIG (GTAW-P)(optional) Stick (SMAW)
Applications Precision Metal Fabrication Maintenance and Repair Light and Heavy Manufacturing Fabrication Aerospace Shipbuilding Tube and Pipe Automotive Vocational
Features Syncro Start for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification. Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage. Last procedure recall automatically recalls the last procedure set-up when switching polarity. Built-in preflow/postflow provides 0.2 - 5 seconds of preflow and 0 - 50 seconds of postflow. Built-in cable hangers on both sides conveniently fold out of power supply so weld cables can be stored to prevent torch or cable damage. Built-in consumable storage located on the front panel allows the operator to store and readily access the needed consumables to be more productive.
|
Electrical Description |
|
Comments: |
- NEW Cost: $2,525.00
The Syncrowave® 250 DX delivers excellent welding performance, control and versatility. The basic machine includes all the essential features you need for high-precision AC/DC TIG welding, plus the flexibility to handle a wide variety of metals. The Syncrowave 250 DX offers an effective solution in any light industrial situation that requires constant current Squarewave technology. Efficient and adaptable, the single-phase Syncrowave 250 DX is a great choice for fabrication shops as well as vocational training facilities. Its low-profile case fits neatly into any industrial location, while its rugged construction ensures reliable operation under constant use. A spectrum of available options allow you to start simple and add features as you need them. This high-performance machine pays off with extraordinary value
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - SPX/OTC Model - 25 Ton Shop Press |
---|
FOR SALE: Ad # 7802 , Year = , Make = SPX/OTC , Model = 25 Ton Shop Press |
|
Category: Hydraulic H-Frame Press
|
Capacity: Hand Pumped, 25 Ton, Hydraulic SPX Shop Press
|
Ad #
7802 |
Year:
|
|
Make:
| SPX/OTC
|
Model:
| 25 Ton Shop Press
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Capacity: 25 Tons
Hand Operated Hydraulics Distance Between Frames: 30" Adjustable Height - Hand cranked
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Miller Model - Spectrum 375 |
---|
FOR SALE: Ad # 7806 , Year = , Make = Miller , Model = Spectrum 375 |
|
Category: Plasma
|
Capacity: Portable Miller Spectrum 375 DC Plasma Cutting System
|
Ad #
7806 |
Year:
|
|
Make:
| Miller
|
Model:
| Spectrum 375
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Includes all standard accessories
|
Electrical Description |
|
Comments: |
- Cost just over $1,000 NEW
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Trin-Mac Model - Mac-Blast 36 x 24 |
---|
FOR SALE: Ad # 7804 , Year = , Make = Trin-Mac , Model = Mac-Blast 36 x 24 |
|
Category: Bead & Shot Blasters
|
Capacity: 36" x 24" Trin-Mac Sand Blasting Cabinet
|
Ad #
7804 |
Year:
|
|
Make:
| Trin-Mac
|
Model:
| Mac-Blast 36 x 24
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- See Photos for details - in VERY good condition
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Hotsy Model - APW-7230A |
---|
FOR SALE: Ad # 7803 , Year = , Make = Hotsy , Model = APW-7230A |
|
Category: Cleaning Equipment
|
Capacity: Hotsy Automatic Parts Washer with Powered Turn Table
|
Ad #
7803 |
Year:
|
|
Make:
| Hotsy
|
Model:
| APW-7230A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 50"H x 34"W x 44" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Powered Turn Table
Basket: 22" diameter x 5" deep Jet System Powered Oil Skimmer Timer: For Heater Timer: Wash Cycle 1 HP Pump 28 GPM 30 PSI 500 lbs. Load Capacity 23 Gal. Sump Capacity
|
Electrical Description |
|
Comments: |
- The 7230 Series is a compact top-load, automatic aqueous parts washer with a 22" turn table and 16" work height that fits most commercial applications
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|