|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Sawing Equipment
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1960s Make - TOLEDO BEAVER Model - SPEED CUT 20A |
|---|
| FOR SALE: Ad # 8130 , Year = 1960s , Make = TOLEDO BEAVER , Model = SPEED CUT 20A | 
|
|
Category: Pipe, Tube & Bar Cut Off (Production)
|
Capacity: 20" CUT OFF SAW
|
| Ad #
8130 |
| Year:
| 1960s
|
| Make:
| TOLEDO BEAVER
|
| Model:
| SPEED CUT 20A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 850 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- TOLEDO BEAVER 20" CUT OFF/CHOP SAW WITH 1 HP 3600 RPM MOTOR AND ATTACHED VACUUM CLEANER. USES 20" ABRASIVE DISC BLADE. HAS CHAIN VICE AND ALL SAFETY SHIELDS IN PLACE.
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1970 Make - McDONOUGH Model - STERLING DV |
|---|
| FOR SALE: Ad # 8115 , Year = 1970 , Make = McDONOUGH , Model = STERLING DV |
|
|
Category: Tool & Cutter Grinders
|
Capacity: 1/8 TO 2.5" VARIABLE ANGLE DRILL GRINDER
|
| Ad #
8115 |
| Year:
| 1970
|
| Make:
| McDONOUGH
|
| Model:
| STERLING DV
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 400 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- McDONOUGH (STERLING) MODEL DV VARIABLE ANGLE DRILL GRINDER. USES 6" GRINDING WHEEL AND MAY BE USED FOR ANY INCLUDED ANGLE FROM 90 TO 140 DEGREE. WILL GRIND 2, 3 & 4 LIP DRILLS.CLEARANCE GAUGE AND GEARED HANDWHEEL TO ALLOW FOR PRECISION/ACCURATE ANGLE SETTING. HAS BUILT ON DIAMOND WHEEL DRESSER FOR KEEPING THE GRINDING WHEEL SURFACE CORRECT.
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1967 Make - MORRISON Model - 1" KEYSEATER |
|---|
| FOR SALE: Ad # 8118 , Year = 1967 , Make = MORRISON , Model = 1" KEYSEATER |
|
|
Category: Keyseaters
|
Capacity: MORRISON 1" KEY SEATER
|
| Ad #
8118 |
| Year:
| 1967
|
| Make:
| MORRISON
|
| Model:
| 1" KEYSEATER
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 450 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- MORRISON 1 INCH KEY SEATER WITH 1-1/4 & 3/4" BARS. COMES WITH 3/16, 1/4, 9/16, 11/16 & 13/16 HIGH SPEED CUTTERS FOR 3/4" BAR AND 7/16,1/2, 5/8, 3/4, 7/8 & 1" HIGH SPEED CUTTERS FOR 1-1/4" BAR. UNIT IS CAPABLE OF 6" & 9" STROKES BY CHANGING THE LINK ROD ON THE BULL GEAR TO THE OUTER POSITION.
|
| Electrical Description |
|
|
| Comments: |
- OTHER TOOLS MAY BE AVAILABLE WHICH HAVE NOT BEEN IDENTIFIED AT THIS TIME. UNIT WAS USED TO SUPPORT REBUILD OF PUMPS AT A PAPER MILL.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1995 Make - Roper Whitney/Betenbender Model - 10 H 8 |
|---|
| FOR SALE: Ad # 8105 , Year = 1995 , Make = Roper Whitney/Betenbender , Model = 10 H 8 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 8' X 10ga(1/8") Pexto Hydraulic Shear
|
| Ad #
8105 |
| Year:
| 1995
|
| Make:
| Roper Whitney/Betenbender
|
| Model:
| 10 H 8
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 6500 lbs
|
| Dimension: L x W x H | 10' X 8' X 4' 6" |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- ROPER WHITNEY PEXTO/ Betenbender 8' SHEAR CAPABLE OF CUTTING 10 GA (1/8")MILD STEEL.
HYD.BACK GAUGE EXTENSION 36" W/ mechanical readout 0.001 display,
TABLE HEIGHT 32"
20 STROKES PER MINUTE AT FULL STROKE.
MACHINE WAS USED IN SUPPORT OF A PAPER MILL OPERATION.
SPECIFICATIONS:
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10 Ga.-304 Stainless Steel(At Highest Rake) 10 Ga.
Main Motor .................. 10 HP
Nominal Cutting Length .. 100 inches
Number of ....................... 15
Knives (Four(4) Cutting .. 100"x1"x3"
Rake of Moving Blade (per .. 1/4
Back Gauge ............ 36 inches
Strokes Per ................. 32
Oil Reservoir (Hydraulic Oil 42 Gallons
Shipping Weight .......................6,500lbs.
Machine Dimensions:
Overall Height ....... 55 inches
Overall Length ................. 121 inches
Overall Width-74 inches(Including Back-gauge)
Electrical Requirements .. 230V-28amp/460V-14amp
Recommended Power Line .................. 230V-8ga/460v-12ga
36" Power Backgauge W/ mechanical readout 0.001 resolution
Power Adjust Variable Rake
4’ Squaring Arm with Inlaid Scale
Single Piece Top and Bottom, HCHC Shock Resistant Knives with Four Cutting Edges
Hydraulic Self-Compensating Holddown Bar Assembly
NEMA Electrics
All Hydraulic Fluids Included
American Made Motor and Valves
Safety Switch for Front Gaurd
Disconnect Switch
American Made Hoses and Fittings
All Steel Construction
Hydraulic Pressure: 2500 PSI
Foot Switch or push button activated
Betenbender designs simplicity and safety into its Hydraulic Shears -- with an advanced hydraulic system and flexible operation. They're easy to operate, easy to maintain and able to withstand the rigors of today's production demands. A wide range of options are available.
Controls:
Push button and switch controls are at your fingertips. The fully guarded, 2-position 110V footswitch lets you interrupt the cutting stroke at any point in its cycle.
Easy Material Handling:
A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4’ squaring arm with recessed scale makes for fast, easy measurement.
Modified High Carbon, High Chrome Reversible Knives:
Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
Electrical System:
Meets NFPA79 and construction requirements of the ANSI B11.4. All machines have disconnect switches, magnetic starters, 110/120 volt controls, and 220/460 voltages.
A Betenbender Hydraulic Shear is capable of shearing 1/8" (10 gauge) material
|
| Electrical Description |
|
|
| Comments: |
- A MAINTENANCE FILE IS AVAILABLE ON THE MACHINE. Machine can be upgraded to a 3/16" capacity for 2800.00: New machine price is $32,000.00: Parts readily available thru Betenbender...
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
