|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Grinding Machinery
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - Make - Okamoto Model - 6-18DX |
|---|
| FOR SALE: Ad # 12536 , Year = , Make = Okamoto , Model = 6-18DX | 
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 6" x 18" automatic grinder
|
| Ad #
12536 |
| Year:
|
|
| Make:
| Okamoto
|
| Model:
| 6-18DX
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 2600
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Okamoto 6-18DX fully automatic surface grinder
Maximum grinding area (L x W): 18"x6˝; Maximum weight of work piece: 264 lbs.;
Surface length: 20";
Surface Width: 6";
Maximum longitudinal travel: 20.9";
Maximum cross travel: 6.9";
T-slot (Qty. x width): 1x0.669;
Longitudinal movement of table; Hydraulic feed: 0.33-66.67 ft/min; Hand feed per revolution cross movement of saddle intermittent feed: 0.002-0.1;
Continuous feed: 3-8 in/min;
no coolant system
Voltage: 230/460v; Phase 3; Cycle 60;
Spindle: 1hp/2p;
Hydraulic pump: 1hp/2p;
Vertical feed: .5hp;
L x W x H: 77x52x80";
Weight: 2640 lbs.;
Equipped with: 6x12 perm magnetic Chuck, , wheel hub /puller,manuals, transformer 220/3
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Harig Model - Super612 |
|---|
| FOR SALE: Ad # 12535 , Year = , Make = Harig , Model = Super612 |
|
|
Category: Surface Grinders
|
Capacity: 6" x 12"
|
| Ad #
12535 |
| Year:
|
|
| Make:
| Harig
|
| Model:
| Super612
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1500
|
| Dimension: L x W x H | 4 x 5 x 6 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Harig Surface Grinder
6" x 12"
Votlage 220/ 3 Phase
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Jones and shipman Model - 540 |
|---|
| FOR SALE: Ad # 12537 , Year = , Make = Jones and shipman , Model = 540 |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 6" x 18"
|
| Ad #
12537 |
| Year:
|
|
| Make:
| Jones and shipman
|
| Model:
| 540
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Jones and Shipman Model 540
6" x 18"
Power X ,Y, Z
3400 RPM
Main spindle motor HP: ?
Voltage 220/ 3 Phase
no chuck!
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - Make - Plasti-Vac Model - 6100TX-DE |
|---|
| FOR SALE: Ad # 12539 , Year = , Make = Plasti-Vac , Model = 6100TX-DE |
|
|
Category: Thermoforming Machines
|
Capacity: 4' x 10'
|
| Ad #
12539 |
| Year:
|
|
| Make:
| Plasti-Vac
|
| Model:
| 6100TX-DE
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Plasti-Vac
Model 6100TX-DE
6' x 10'
36" Height max
440/ 3 Phase
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Plasti-Vac Model - 404X |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 12538 , Year = , Make = Plasti-Vac , Model = 404X |
|
|
Category: Thermoforming Machines
|
Capacity: 4' x 4'
|
| Ad #
12538 |
| Year:
|
|
| Make:
| Plasti-Vac
|
| Model:
| 404X
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Plasti-Vac
Model 404X
Voltage 220/ 3 Phase
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Edwards Model - E2M175 |
|---|
| FOR SALE: Ad # 12540 , Year = , Make = Edwards , Model = E2M175 |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Vacumm Pump
|
| Ad #
12540 |
| Year:
|
|
| Make:
| Edwards
|
| Model:
| E2M175
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Edward Vacum Pump Model E2M175
Voltage 220/ 3 Phase
std specs below:
Overview
Prices & Options
Features & Benefits
Technical Data
Accessories
Documents & Support Overview
Edwards E2M175 series two stage oil sealed
rotary vane vacuum pumps are renowned for their
high ultimate vacuum, rapid pumping speeds,
quiet operation and ability to handle water
vapour. These direct drive rotary vane pumps
are inherently compact and vibration free, and
with their finger-proof fan and coupling
housings they offer excellent operator
protection.
This pump is suitable for most duties and is
safe to handle non-flammable gases and vapours
within the normal operating parameters of the
pump.
Reliable system protection devices
Every pump has protection devices to prevent
oil and air suck-back into the vacuum system if
the pump stops while under vacuum. A variety of
protection devices are used, depending on the
pump size and cost, but emphasis is always
placed on reliability and simplicity. When you
use gas ballast on some of the pumps, you must
use a solenoid operated gas ballast control
valve to prevent air suck-back.
Positive Pressure Oil Lubrication
The EM pumps incorporate a well proven
positive pressure oil lubrication system which
as been developed by Edwards to ensure correct
lubrication in all duty modes and particularly
to prevent oil starvation with high gas loads.
An integral oil pump ensures that a more than
adequate oil flow is pumped throughout the
stator/rotor assembly at all times.
This oil lubrication system means that the
level of oil in the reservoir is less critical
than with other pump designs. All pumps can
operate with oil levels as low as 50-70 of the
maximum. A full length, easily visible oil
level sight glass allows you to conveniently
monitor the oil level.
Gas Ballast Facility
The EM pumps have a gas ballast valve. The
valve is used to introduce a suitable gas into
the stator during the compression stage: this
prevents condensation of vapors inside the
pump, dilutes and ejects corrosive gases and
purges the oil of gases and vapors. Therefore,
the use of gas ballast reduces oil degradation
and pump corrosion.
Low Noise Levels
The EM pumps maintain Edwards’s reputation
for quiet operation pumps with a typical noise
level of 75 dB(A).
Pumping Systems
The EM pumps, with suitable accessories, can
partner a variety of other types of pump in
vacuum systems for industry and for research. A
special feature of the E2M175S is the central
vacuum inlet which enables you to fit a
mechanical booster pump with a minimum
overhang, to create compact combination pumping
systems.
Easy Maintenance
The advanced lubrication system allows the EM
pumps to work with wide oil level tolerances,
which reduce the need to top-up the oil.
All EM pumps are constructed with internal
dowels, which reduce the need for skilled
setting of tolerances, when the pump is
dismantled. The pumps are designed so that all
key components are easily accessible. The
exhaust valve seals and oil distributor seals
are exposed after the top cover is removed. The
shaft seal can be replaced quickly without
stripping down the pump.
Applications
Vacuum metallurgy processes
Thin film coating technologies
Pharmaceutical freeze drying
Refrigeration and air conditioning system
evacuation, drying, and backfilling
Transformer and cable drying and
impregnation, insulating oil treatment plant
Lamp manufacture
Cryogenic vessel evacuation
Vacuum drying and distillation in chemical
industries
Semiconductor device manufacture
Backing pump for high vacuum applications
Displacement
50Hz 178 m3h-1 / 105 ft3min-1
60Hz 214 m3h-1 / 126 ft3min-1
Speed (Pneurop)
50Hz 160 m3h-1 / 94 ft3min-1
60Hz 196 m3h-1 / 115 ft3min-1
Number of stages 2
Ultimate vacuum (total pressure)
Without gas ballast 1 x 10-3 mbar / 7.7 x 10-4
Torr
With gas ballast 7 x 10-3 mbar / 5.4 x 10-3
Torr
Ultimate with Fomblin®
Without gas ballast 1 x 10-2 mbar
Inlet connection ISO63 blank flange with seal
Outlet connection ISO40 flange centre tapped
Max outlet pressure 0.5 bar gauge
Max inlet pressure for water vapor 20 mbar /
15 Torr
Max water vapor pumping rate 0.3 kg h-1 / 0.7
lb h-1
Weight 230 kg / 508 lb
Motor protection rating IP55
Motor power
50Hz 5.5 kW / 7.5 hp
60Hz 6.5 kW / 8.5 hp
Standard oil capacity
maximum 25 litre
minimum 16 litre
PFPE oil capacity
maximum 18 litre
minimum 6.5 litre
Recommended oil Ultragrade 70
Noise level 75 dB (A)
Water cooling requirement 1.3 lmin-1
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
