|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1982 Make - Mori-Seiki Model - SL3 |
|---|
| FOR SALE: Ad # 8601 , Year = 1982 , Make = Mori-Seiki , Model = SL3 | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity:
|
| Ad #
8601 |
| Year:
| 1982
|
| Make:
| Mori-Seiki
|
| Model:
| SL3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 9000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 12 tool turret
10" 3 jaw chuck
16C collet chuck
RS232 port
Yasnac 200G2 control
Factory Specs: please verify below:
Swing over bed Highest Spindle Speed (RPM): 3501 - 4000
Make: Mori Seiki
Distance Between Centers: 21'' - 30''
SWING OVER CARR./CROSS SLIDE 7.8"
DISTANCE BETWEEN CENTERS 22"
MAX LONGITUDINAL TRAVEL 22"
PROGRAMMABLE SPINDLE SPEED RANGE 4000 RPM
SPINDLE NOSE A2-6
HOLE THRU SPINDLE 2.2"
TAILSTOCK QUILL DIAMETER 3.34"
TAILSTOCK QUILL TAPER TAILSTOCK QUILL STROKE
CARRIAGE/BED SLANT 45 DEG.
CURVIC COUPLING DIAMETER 8.26"
ELECTRICS 3/60/220
MAIN MOTOR 20 HP
WEIGHT 9350 LBS
|
| Electrical Description |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1983 Make - Mori Seiki Model - MV Jr |
|---|
| FOR SALE: Ad # 8600 , Year = 1983 , Make = Mori Seiki , Model = MV Jr |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity:
|
| Ad #
8600 |
| Year:
| 1983
|
| Make:
| Mori Seiki
|
| Model:
| MV Jr
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 7000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 20 tool ATC
Fanuc 10M control
cat 40 spindle
6000 RPM
manuals
Factory New Specs: please verify
Travel X axis (max. table travel) .................inch(mm) 22.0"(560)
Y axis (max. saddle travel)..................inch(mm) 16.1"(410)
Z axis (max spindle travel)..inch(mm) 8.1"(460)
Distance between spindle nose & table top...inch(mm) 5.9"(150)-24.6"(610)
Distance between spindle center & column ..inch(mm) 26.8"(680)
Table Table size in(mm) 35.4"(900)x17.7"(450)
Max. load on table.....inch(mm) 660(300)
Shape of table surface.................inch(mm) 0.7"(18mm), 4 T-Slots
Spindle Max. Speed............min-rpm 8000
Spindle Taper No.40
Bearing inner dia.......inch(mm) 2.6"(65)
Feed Rapid feed rate....inch(mm) X,Y 787.4" (20,000)
Z 472.6" (12,000)
Cutting Feed.......inch(mm) X,Y.Z, 0.0001
Jog feed rate..inch(mm) 0.4"(10) 78.7" (2,000)
ATC No. of tools 20
Max tool dia..inch(mm) 3.1"(80) Max tool length.......inch(mm) 9.8"(250)
Max tool weight.....lbs (kg) 17.6 (8)
Accuracy Positioning accuracy....................................inch(mm) 0.0002" (0.005)
Repeatability...............................................inch(mm) 0.00004" (0.001)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1998 ? Make - Bridgeport Model - Discovery 308 |
|---|
| FOR SALE: Ad # 7106 , Year = 1998 ? , Make = Bridgeport , Model = Discovery 308 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 18 x 12 x 16 Bridgeport Discovery 308 VMC
|
| Ad #
7106 |
| Year:
| 1998 ?
|
| Make:
| Bridgeport
|
| Model:
| Discovery 308
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 5,800 lbs
|
| Dimension: L x W x H | 105"L x 80"D x 82" H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- GENERAL SPECIFICATIONS AS PER BROCHURE:
Travels:
-----------------------X: 17.7"
-----------------------Y: 12.2"
-----------------------Z: 16.1"
MAX TABLE LOAD: 550 LBS
TABLE: 14" (W) X 33" (L)
MAX TABLE LOAD: 550 LBS
SPINDLE TO NOSE TABLE TOP MIN.: 4.75"
SPINDLE TO NOSE TABLE TOP MAX.: 20.86"
SPINDLE SPEED: 60-4000 RPM
SPINDLE TAPER: BT-30
SPINDLE MOTOR (HP): 4.5 HP
TOOL CHANGER POSITIONS: 8 ATC
EQUIPPED WITH:
BRIDGEPORT SX-15/CRT CNC CONTROL 3 AXIS
FLOOD COOLANT SYSTEM
RS-232 INTERFACE
BIJURE LUBE SYSTEM
FULL COOLANT ENCLOSURE
|
| Electrical Description |
|
|
| Comments: |
- Lots of tools and tooling - only about half show on photographs!Tool changer will only run 4-5 tools at a time-but works..We can load at dock height only not ground level..will need rigger if at ground level load..
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 80's-90' Make - Bridgeport Model - series 1 |
|---|
| FOR SALE: Ad # 8607 , Year = 80's-90' , Make = Bridgeport , Model = series 1 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: bridgeport
|
| Ad #
8607 |
| Year:
| 80's-90'
|
| Make:
| Bridgeport
|
| Model:
| series 1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 2 axis readout
9 x 48 table
power feed on x, needs a new gear inside..
2 hp
does not include vise
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2008 Make - Jet Model - JDP-17MF/354169 |
|---|
| FOR SALE: Ad # 9109 , Year = 2008 , Make = Jet , Model = JDP-17MF/354169 |
|
|
Category: Single Spindle Drill Press
|
Capacity: Swing: 16-1/2 Drilling Capacity: 5/8 Spindle Taper: MT-2 Spindle
|
| Ad #
9109 |
| Year:
| 2008
|
| Make:
| Jet
|
| Model:
| JDP-17MF/354169
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 178
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 16-1/2-inch drill press; 13-3/4-inch table tilts 45 degrees left and right
16 speeds from 200 to 3,630 rpm; 3/4-horsepower motor
Cast-iron construction with heavy-steel components
Includes drill press, drill chuck, and key; bulb for work light not included
178 poundsA staple in the professional woodshop, a drill press should be able to perform grunt work, yet quickly adjust for precision applications. Jet's 16-1/2-inch model does just that. Made of cast-iron and heavy-gauge steel components, this press spins bits up to 5/8 of an inch with 16 speeds from 200 to 3,630 rpm. A 3/4-horsepower induction motor drives the belts, and, for your convenience, it can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources. The large 13-3/4-inch worktable glides easily with rack-and-pinion adjustment and tilts 45 degrees right or left to accommodate your needs. Two features we like are the positive depth stop on the left side, which quickly adjusts and locks in place via three nuts, and the built-in lamp, a nice touch some competitors don't offer. Changing belt position is a snap after flipping open the hinged metal cover, and, to personalize the press for your comfort and peace of mind, you can adjust the tension on the spindle return spring, as well as lock out the start button to protect others in your absence. This industrial-style drill press is a tool any professional or serious home woodworker can depend on.
Presses Floor Bench - Drilling Machine Type: Floor Model Drill Press Swing: 16-1/2 Drilling Capacity: 5/8 Spindle Taper: MT-2 Spindle Speed Control: Step Pulley Minimum RPM: 200 Maximum RPM: 3630 Voltage: 115/230 Spindle Travel: 4-3/8
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - Make - Thompson Model - 14 x 40/ 4C |
|---|
| FOR SALE: Ad # 8605 , Year = , Make = Thompson , Model = 14 x 40/ 4C |
|
|
Category: Surface Grinders
|
Capacity: 14 x 40 , X & Y feed not Z
|
| Ad #
8605 |
| Year:
|
|
| Make:
| Thompson
|
| Model:
| 14 x 40/ 4C
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 19,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 14 x 40 electro mag chuck
2 axis feed X & Y ....Z is manual down feed..
Work Height-chuck to wheel-approx 12"
18" x 2 wheel on machine
Factory specs below----please verfy
THOMPSON MODEL 4C HORIZONTAL SPINDLE SURFACE GRINDER
Table (variable) 10 to 100 IPM
Cross (variable)` 6 to 240 IPM
Vertical (variable) 0 to 15 IPM
Estimated grinding wheel speed 6000 SFPM
Grinding wheel size 20" x 3" x 8"
Overall Dimensions 150"L x 85"W x 100"H
Approximate weight 19,000 lbs.
15 HP 220/440/3/60 1200 RPM Spindle motor
5 HP 220/440/3/60 Hydraulic system motor
1/2 HP A/C Power elevation motor
14" x 40" Electromagnetic chuck
Push button controls for hydraulic on/off, wheel on/off, coolant on/off
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 80's Make - Harig Model - 6 x 18 |
|---|
| FOR SALE: Ad # 8604 , Year = 80's , Make = Harig , Model = 6 x 18 |
|
|
Category: Surface Grinders
|
Capacity: 6 x 18 manual grinder
|
| Ad #
8604 |
| Year:
| 80's
|
| Make:
| Harig
|
| Model:
| 6 x 18
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 1300
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- manual 6 x 18 grinder with a 6 x 12 perm chuck
6 x 12 perm mag chuck
teflon ways
Finefeed manual downfeed screw 0.0001 increments
cable traverse type
8" wheel ??
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 84? Make - Okamoto Model - 6 x 12 |
|---|
| FOR SALE: Ad # 8603 , Year = 84? , Make = Okamoto , Model = 6 x 12 |
|
|
Category: Surface Grinders
|
Capacity: 6x 12
|
| Ad #
8603 |
| Year:
| 84?
|
| Make:
| Okamoto
|
| Model:
| 6 x 12
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 1650
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 6 x 12 electro chuck
wet/dry
readout
Factory specs-please verify
Table Size 6" x 14"
Longitudinal Travel 15"
Cross Travel 8"
Max. Distance Spindle To Table 14"
Grinding Wheel Size 8" x 3/4" x 1 1/4"
Dimensions (W x D x H) 47" x 43" x 70"
Weight 1,650 LBS.
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Mitsui Model - 6 x 12 / 200MH |
|---|
| FOR SALE: Ad # 8602 , Year = , Make = Mitsui , Model = 6 x 12 / 200MH |
|
|
Category: Surface Grinders
|
Capacity: 6 x 12
|
| Ad #
8602 |
| Year:
|
|
| Make:
| Mitsui
|
| Model:
| 6 x 12 / 200MH
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 6 x 12 perm mag chuck
dry cutting
Table Size: 6-1/4" X 14"
Table Travel (Longitudinal) 15"
Table Travel (Cross): 8"
Maximum Height Table to Spindle Center: 18"
Wheel Size: 8" x 3/4" x 1 1/4"
Main Drive Motor: 1.3 HP
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1995 Make - Charmilles Model - 310 |
|---|
| FOR SALE: Ad # 8597 , Year = 1995 , Make = Charmilles , Model = 310 |
|
|
Category: Wire EDM Machines
|
Capacity: 15.7" x 9.8" x 15.7" travels
|
| Ad #
8597 |
| Year:
| 1995
|
| Make:
| Charmilles
|
| Model:
| 310
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 5500
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Includes Mecca rail system-w/ back & side rails , Chiller & Transformer
only cuttting hrs 18,500 on time
Brass Generator option included
Fatory Specs:below
Specification Description
Maximum Workpiece Weight 2207 Lbs
Maximum Workpiece Size 33.5" x 19.7" x 15.7"
Machining Stroke ( X x Y x Z ) 15.7" x 9.8" x 15.7"
Taper Capacity 0 to 30 Degrees
Wire Diameter 0.010"
Approximate Overall Dimensions 71"LR x 63"FB x 88"H
Approximate Machine Weight 5,511 Lbs
Equipped With:
* Charmilles CNC Control * 14" Color Graphics Monitor * 16-Bit Microprocessor * Auto Wire Threading * Remote Hand Pendant * Chiller * Filtration System * Manuals
|
| Electrical Description |
|
|
| Comments: |
- Very nice clean units-ready to go !
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1993 Make - Charmilles Model - Robofill 500 |
|---|
| FOR SALE: Ad # 8598 , Year = 1993 , Make = Charmilles , Model = Robofill 500 |
|
|
Category: Wire EDM Machines
|
Capacity: Large
|
| Ad #
8598 |
| Year:
| 1993
|
| Make:
| Charmilles
|
| Model:
| Robofill 500
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 6000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Wire EDM
Mecatool Pallet, Chiller & Transformer
19,076 Hrs
Factory Specs
Charmilles Robofil 500
Travel 15.75" x 27.5" x 15.75"
Taper ± 30 deg.
Max Workpiece 4400 lbs.
|
| Electrical Description |
|
|
| Comments: |
- Nice lksarge unit ready to go!
|
|
|
| FOR SALE: Year - 1991 Make - charmilles Model - Robofil 400 Sinker |
|---|
| FOR SALE: Ad # 8599 , Year = 1991 , Make = charmilles , Model = Robofil 400 Sinker |
|
|
Category: RAM / Conventional EDM Machines
|
Capacity: large sinker with toolchanger :17.7 x 12.6 x 16 travels
|
| Ad #
8599 |
| Year:
| 1991
|
| Make:
| charmilles
|
| Model:
| Robofil 400 Sinker
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 6000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 20 Tool changer carousel
Erowa system
chiller
transformer
Factory Specs:verify below
31" X 47" X 17" DEEP TANK
:: Type : ROBOFORM 400
:: Travels: X x Y x Z :450mm x 320mm x 410mm : 17.72 " x 12.6" x 16.5"
:: Manufacturer : CHARMILLES
:: Description : max. workpiece weight: 800 Kg
Worktable size: 800 x 560 mm
C - axis
20-x toolchanger
Generator 128A
2 floppy discs
|
| Electrical Description |
|
|
| Comments: |
- Very nice unit , large cutting capacity
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - J & L Model - PC 14A |
|---|
| FOR SALE: Ad # 8606 , Year = , Make = J & L , Model = PC 14A |
|
|
Category: Comparators
|
Capacity: 14 inch dia
|
| Ad #
8606 |
| Year:
|
|
| Make:
| J & L
|
| Model:
| PC 14A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 800
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 14" screen
10x lense
surface ilumination
Factory spec-please verify below..
14" Diameter Front Screen.
4" Vertical Travel. (Manual)
8" Horizontal travel. (Manual)
50 lb. Table Capacity.
30" x 6" Hard Chrome Table.
Inverted Image.
Digital Readouts.
Resolution .00005
11°deg Table Helix
Tungsten Halogen Projection.
Single Lens Mount.
|
| Electrical Description |
|
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
