|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 2005 Make - Romi Model - G260 |
|---|
| FOR SALE: Ad # 7821 , Year = 2005 , Make = Romi , Model = G260 | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" chuck X 24"cc X 2 1/2" bore , 4-4500rpm
|
| Ad #
7821 |
| Year:
| 2005
|
| Make:
| Romi
|
| Model:
| G260
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Romi Model G-260
8" hydraulic 3 jaw chuck X 24" cc,
2.5" bar capacity,
4-4500 rpm,
slant bed turning center, with the following standard features and accessories:
AC motor drive through ribbed belt and pulleys, high stability one piece cast iron base, unique slant bed design to provide even distribution of cutting forces,hardened and ground bedways, Turcite coated Cross Slide and Saddle Guideways, Precision ground ballscrews, Fanuc AC Brushless Servos, Romi 12 station / 12 tool servo driven,hydraulic clamping,prorammable turrett, coolant through toolholders, fully enclosed splash guard, removable chip box, chuck driven by hydraulic cylinder,
GE-Fanuc Control Series 21 i, bar feeder interface, chip conveyor, set of wrenches for machine operation, set of instruction manuals, set of leveling screws, nuts and leveling support plates, set of tool holders and reduction sleeves, sealed fluorescent worklight, hydraulic operated 3-jaw chuck with one set of soft jaws, interlocked sliding door, Automatic lubrication system with line filter, complete coolant system with 10 l/min, 2 bar, 0.18 kW / 0.24 cv motor with chip protection cleaning bypass and chip protection cleaning system with 10 l/min 1.7 bar, 12 sltation /
12-tool servo driven turret with hydraulic clamping, hydraulic power unit
|
| Electrical Description |
|
|
| Comments: |
- Machines put in service in 2006. TWO to choose from. Like new condition. Exceptionally Clean.
|
|
|
| FOR SALE: Year - 2001 Make - PowerMaster Model - KL-1640 |
|---|
| FOR SALE: Ad # 6384 , Year = 2001 , Make = PowerMaster , Model = KL-1640 |
|
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: 16 x 40 teach lathe-cnc/manual
|
| Ad #
6384 |
| Year:
| 2001
|
| Make:
| PowerMaster
|
| Model:
| KL-1640
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 2300 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- PowerMaster Baron-Max versatile CNC Plus Center Lathe, rugged heavily ribbed meehanite casting,extra wide induction hardened and precision ground bedways,Turcite B coated slideways on carriage, precision hand scraped on all mating sliding surfaces and gibs, ground ball screw with preloaded double nuts fitted on angular contact bearing. AC vector drive spindle drive for high power constant surface speed cutting,large bore heavy duty spindle mounted on taper roller bearing for heavy cuts. Three infinitely variable spindle speed gear ranges with auto shifting, fully programmable spindle speeds. Specially designed oil lubrication system for gears and taper roller bearing to allow high speed runs. Heavy duty manual tail-stock. Yaskawa DC servo axis motors and high performance drives. Dual electronic hand wheels for manual operation. Auto lube to all sliding surfaces and axis ball-screws. Flood coolant system and halogen work light, spindle load meter, cycle stop light indicator. All electric components are in built-in enclosure cabinet with main disconnect. Fully enclosed guarding with interlocked sliding door access, to CE standard. Each machine inspected by Renishaw laser, verified, and ball-bar tested, undergoes 50 hours of non-stop running before shipment. Includes three jaw screw chuck, flood coolant system, auto lube, two electronic hand wheels,for manual operation, eight station turret, fully enclosed splash guard with interlocking sliding door. Anilam 4200T CNC programmable controller. 16" swing over bed, 8 5/8" swing over cross-slide, 25 1/2" swing over gap, 40 inches CC. D1-6 camlock spindle nose, 2 1/8" spindle bore. MT#6 spindle nose taper, 2" tail stock quill diameter, #4 MT. Spindle drive motor 7.5 HP. 197 IPM rapid travel. Cutting feed rate 0-138 IPM. Accuracy 0.0004/12", repeatability 0.0002/12". Power required 12 KVA.
|
| Electrical Description |
|
|
| Comments: |
- REDUCED!!!! OWNER NEEDS SPACE!!!!!
|
|
|
| FOR SALE: Year - 1984 Make - Mori-Seiki Model - SL3H |
|---|
| FOR SALE: Ad # 6378 , Year = 1984 , Make = Mori-Seiki , Model = SL3H |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 16" x 24" Mori Seiki SL3H CNC Turning Center
|
| Ad #
6378 |
| Year:
| 1984
|
| Make:
| Mori-Seiki
|
| Model:
| SL3H
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 9,300 lbs
|
| Dimension: L x W x H | 112"LR x 75"FB x 75"H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Mori-Seiki Model SL3H cnc turning center with 3T Fanuc Control,
2.625 spindle bore,
Max. Swing - 22.4"
Max. Cross Travel - 6.3"
Standard Workpiece Dia. - 7.87"
Max Work Length - 21.6"
Spindle Speed 37-4000 RPM
Spindle Nose - A2-6
Spindle Bore - 3.03"
Turret type - 12 position
Spindle Motor - 14-3/4/20 HP
Tailstock Quill Dia. - 3.35"
Tailstock Quill Taper - MT #3
Tailstock Quill Stroke - 3.15"
Equipped with:
Fanuc 3T CNC Control
RS-232 Port
12 Position Turret
10" 3-Jaw Chuck
Tailstock
Hydraulic Pump & Tank
Coolant System
All Available Manuals
Includes Misc Tooling:
6 O.D., 6 I.D., tool blocks,
|
| Electrical Description |
|
|
| Comments: |
- REDUCED!!! Owner Needs Space!!! Machine is very clean and in very good condition and still making good parts.
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1982 Make - Summit Model - 2080 Engine Lathe |
|---|
| FOR SALE: Ad # 7989 , Year = 1982 , Make = Summit , Model = 2080 Engine Lathe |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: Summit 19 x 80 gap bed 3" bore engine lathe
|
| Ad #
7989 |
| Year:
| 1982
|
| Make:
| Summit
|
| Model:
| 2080 Engine Lathe
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Summit 2080 19" swing x 80"cc heavy duty engine lathe (swing in gap-27") with 3" spindle bore. D1-8 camlock spindle nose.12 spindle speeds, Range 22-1500 RPM. 7 1/2 HP motor, 230/460volts 3 Phase. Extras include coolant system, taper attachment, thread dial indicator,4 position tool post, micrometer carriage stops, both longitudinal and cross, set of change gears to cut all types of threads.Lots of tooling including (1) 10" three jaw, (1) 12" three jaw, (1) 17" four jaw, chucks,and face plate. Steady rest, follower rest,(2) 5MT live centers,(2) 5MT dead centers, (2) Jacobs 18N Super ball bearing chucks with arbors, extra boring bars, facing, turning and cut off tools and tool holders, and more.Runs and sounds like new, well maintained, belts recently changed,ways in excellent condition.Heavy Duty tailstock with 3" barrel, 8 1/2" travel, #5MT. Owner run machine.
|
| Electrical Description |
|
|
| Comments: |
- Complete shop also for sale, see add #'s 7988,7989,7990,7993,7994,7995,7996,,7998,7999,8000. Call for Price
|
|
|
| FOR SALE: Year - 1967 Make - Herbert Model - # 2-D |
|---|
| FOR SALE: Ad # 6395 , Year = 1967 , Make = Herbert , Model = # 2-D |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Herbert # 2-D Peg Board Automatic Turret Lathe
|
| Ad #
6395 |
| Year:
| 1967
|
| Make:
| Herbert
|
| Model:
| # 2-D
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Large selection of tooling including collets.
Static Bar Feeder
Parts Catcher
All manuals
|
| Electrical Description |
|
|
| Comments: |
- No problem getting parts.
Machine is still in production making good parts
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1998 Make - Turnmaster Model - |
|---|
| FOR SALE: Ad # 7742 , Year = 1998 , Make = Turnmaster , Model = |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 16" swing x 40"cc heavy duty engine lathe
|
| Ad #
7742 |
| Year:
| 1998
|
| Make:
| Turnmaster
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Turnmaster 16" x 40" Heavy Duty Engine Lathe,16" swing over bed, 24" in gap, 9" over cross slide.
35-2000 RPM. full length splash guard, 12" 4 jaw chuck, 12" 3 jaw chuck", steady rest, Jacobs 18N super ball bearing chuck, carbide tipped dead center, 2 position tool post, 5 piece 1" toolholder set, coolant.
|
| Electrical Description |
|
|
| Comments: |
- Machine under power, runs great
REDUCED!!!
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - 2006 Make - Twin Horn Model - VA-500 |
|---|
| FOR SALE: Ad # 8011 , Year = 2006 , Make = Twin Horn , Model = VA-500 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 20 x 16, 10HP, 8000 RPM, 16 tool arm type toolchanger VMC
|
| Ad #
8011 |
| Year:
| 2006
|
| Make:
| Twin Horn
|
| Model:
| VA-500
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 8500 lbs.
|
| Dimension: L x W x H | 84" x 77" x 95" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Twin Horn Model VA-500 VMC,complete with turcite coated and precision scraped box ways, high quality Meehanite castings, 10HP, 8000 RPM labrinth cicuit designed spindle with class P4 super high precision angular contact spindle bearings prevents coolant and chips from entering spindle. 16 tool arm type toolchanger with floating tool unloading system to prevent wear on bearings during fast 3 second tool change. Advanced separated oil and coolant system prevents oil inferiority and eliminates excess oil and coolant.Standard accessories include 16 tool 3 second arm type ATC,coolant system, automatic lube system, work lamp, spindle air blast, work blast, auto power off (M30), rigid tapping, RS-232 interface, Fanuc Oi-MB control, and full machine enclosure.Cat 40 8000 RPM spindle,28 x 16 table,D32 x P8 mm high precision ball scews, X and Y rapids 787 in/min, 630 Z rapid, 0-197 in/min feed rates,20 x 16 x 18 travels, 660 lbs table capacity, 0.005mm/300mm positioning, +/- 0.003mm repeatability. Excellent quality machine with full 1 year parts factory warranty and 2 year Fanuc control factory warranty.
|
| Electrical Description |
|
|
| Comments: |
- Reduced, Owner lost contract!
|
|
|
| FOR SALE: Year - 2005 Make - Twin Horn Model - VH-850 |
|---|
| FOR SALE: Ad # 8012 , Year = 2005 , Make = Twin Horn , Model = VH-850 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 34 x 20 ,15HP, 8000 RPM, 24 tool arm style VMC
|
| Ad #
8012 |
| Year:
| 2005
|
| Make:
| Twin Horn
|
| Model:
| VH-850
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 11,350 LBS
|
| Dimension: L x W x H | 110 x 90 x 96 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Twin Horn Model VH-850 VMC,complete with turcite coated and precision scraped box ways, high quality Meehanite castings, 15HP, 8000 RPM labrinth cicuit designed spindle with class P4 super high precision angular contact spindle bearings prevents coolant and chips from entering spindle. 24 tool arm type toolchanger with floating tool unloading system to prevent wear on bearings during fast 3 second tool change. Advanced separated oil and coolant system prevents oil inferiority and eliminates excess oil and coolant.Standard accessories include 24 tool 3 second arm type ATC,coolant system, automatic lube system, work lamp, spindle air blast, work blast, auto power off (M30), rigid tapping, RS-232 interface, Fanuc Oi-MB control, and full machine enclosure.Cat 40 8000 RPM spindle,40 x 20 table,D40 x P8 mm high precision ball scews, X and Y rapids 590 in/min, 590 Z rapid, 0-197 in/min feed rates,34 x 20 x 20 travels, 990 lbs table capacity, 0.005mm/300mm positioning, +/- 0.003mm repeatability. Excellent quality machine with full 1 year parts factory warranty and 2 year Fanuc control factory warranty.
|
| Electrical Description |
|
|
| Comments: |
- Demoed only at IMTS. Reduced, Owner lost contract!
|
|
|
| FOR SALE: Year - 1979 Make - Cincinnati Millicron Model - 10HC-1000 |
|---|
| FOR SALE: Ad # 7906 , Year = 1979 , Make = Cincinnati Millicron , Model = 10HC-1000 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: Cincinnati Millicron Model 10HC-1000 HMC, 42"X42"X36", with 30" rotary
|
| Ad #
7906 |
| Year:
| 1979
|
| Make:
| Cincinnati Millicron
|
| Model:
| 10HC-1000
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Cincinnati Millicron Model 10HC-1000 horizontal machining center, 42"X42"X36" travels with 30" built in rotary table, 40 tools, cat 45 taper, coolant,230/460, 3 phase, wired 230.
|
| Electrical Description |
|
|
| Comments: |
- toolchanger and control need minor repair
|
|
|
| FOR SALE: Year - 1982 Make - Cincinnati Millicron Model - 10HC-1500 |
|---|
| FOR SALE: Ad # 7907 , Year = 1982 , Make = Cincinnati Millicron , Model = 10HC-1500 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: Cincinnati Millicron Model 10HC-1500, 60"X42"X36" travels
|
| Ad #
7907 |
| Year:
| 1982
|
| Make:
| Cincinnati Millicron
|
| Model:
| 10HC-1500
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 25,000
|
| Dimension: L x W x H | 10ftx 8ft x 10ft tall |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Cincinnati Milakron HMC Model 10HC-1500, 60"X42"X36" travels
with built in rotary table, 40 tools,
cat 45 taper,
coolant.
control-big blue
includes some tooling holders
|
| Electrical Description |
|
|
| Comments: |
- control needs minor repair-has intermittent on/off issue works sometimes other times doesnt...random
spindle and iron very good, would be great update control
have overhead cranes to pick up machine after dissasemble
|
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| FOR SALE: Year - Make - Excello Model - 9 X 42 |
|---|
| FOR SALE: Ad # 6574 , Year = , Make = Excello , Model = 9 X 42 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Excello 9 X 42 Knee Mill with gearbox power feed on x
|
| Ad #
6574 |
| Year:
|
|
| Make:
| Excello
|
| Model:
| 9 X 42
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | 4 x 4 x 7 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Excello 9 X 42 knee mill with Gearbox type power feed on X (needs repair)one shot lube, variable speed, includes collets and clamp kit
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Browne & Sharpe Model - #2 Universal |
|---|
| FOR SALE: Ad # 6575 , Year = , Make = Browne & Sharpe , Model = #2 Universal |
|
|
Category: Universal Mills (Horizontal / Vertical)
|
Capacity: Brown & Sharpe #2 Universal Horzontal Mill
|
| Ad #
6575 |
| Year:
|
|
| Make:
| Browne & Sharpe
|
| Model:
| #2 Universal
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Brown & Sharpe #2 Universal Horizontal Mill with 10 X 50 table, Cat 30 spindle, 40-1530 rpm, 3 HP, power feed on all axes, universal head swivels left and right and up and down, one shot lube, flood coolant, includes arbor supports and tooling
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Handyman Model - CNC |
|---|
| FOR SALE: Ad # 6551 , Year = , Make = Handyman , Model = CNC |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: CNC READY 9 x 49 Knee mill with ballscrews in X & Y , 3HP , 230/460,
|
| Ad #
6551 |
| Year:
|
|
| Make:
| Handyman
|
| Model:
| CNC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Handyman CNC ready knee mill with ballscrews in X & Y , one shot lube, 3HP variable speed head, 230/460 volts. Includes Erickson quick change tooling and holders. Machine has had servos and control removed and is operational as a manual machine, but can easily be converted back to CNC with most control packages.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Bridgeport Model - Auto-Trace 360/30 |
|---|
| FOR SALE: Ad # 6399 , Year = , Make = Bridgeport , Model = Auto-Trace 360/30 |
|
|
Category: Engraving, Copying & Pantograph Equip.
|
Capacity: 64" x 20" 3-Head , Hydraulic Tracing Knee Mill
|
| Ad #
6399 |
| Year:
|
|
| Make:
| Bridgeport
|
| Model:
| Auto-Trace 360/30
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Bridgeport Auto-Trace 360/30 3 head,knee mill, type J 1 HP heads,
R-8 spindle taper,
one-shot lube,
travels 64 x 20 x 16,
80-2700 RPM,
230/460V, 3 phase
with pendant control.
Machine still in production and making good parts.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Brown & Sharpe Model - # 2 |
|---|
| FOR SALE: Ad # 6377 , Year = , Make = Brown & Sharpe , Model = # 2 |
|
|
Category: Horizontal Mills
|
Capacity: Horizontal Milling Machine, Model # 2
|
| Ad #
6377 |
| Year:
|
|
| Make:
| Brown & Sharpe
|
| Model:
| # 2
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Brown and Sharpe # 2 horizontal mill with standard equipment and exta arbors
|
| Electrical Description |
|
|
| Comments: |
- REDUCED!!! Owner needs space!
|
|
|
| FOR SALE: Year - Make - SBL Model - 3VH |
|---|
| FOR SALE: Ad # 6371 , Year = , Make = SBL , Model = 3VH |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10" x 50" South Bend Knee Mill, w. DRO and X Axis Power Feed,
|
| Ad #
6371 |
| Year:
|
|
| Make:
| SBL
|
| Model:
| 3VH
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- South Bend Lathe Model 3VH, 10 x 50 table, Servo power feed on X axis, 2 axis Acurite DRO on X and Y, includes collets and collet rack, one shot lube, and worklight
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Cincinnati Model - No. 3 |
|---|
| FOR SALE: Ad # 6351 , Year = , Make = Cincinnati , Model = No. 3 |
|
|
Category: Horizontal Mills
|
Capacity: 54" X, 15"Y
|
| Ad #
6351 |
| Year:
|
|
| Make:
| Cincinnati
|
| Model:
| No. 3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Travels-54" X, 15" Y, NEW 10 HP motor,230/460 volts, 18-450 RPM, includes miscellaneous tooling and additional short drawbar
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1992 Make - Acer Model - 3VK |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 7735 , Year = 1992 , Make = Acer , Model = 3VK |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity:
|
| Ad #
7735 |
| Year:
| 1992
|
| Make:
| Acer
|
| Model:
| 3VK
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Acer Model 3VK complete with Servo power feed on X, Power Draw Bar, 2 Axis Accurite MillMate DRO, collet set and one shot lube. Machine has very little use and in excellent condition
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 1991 Make - Supermax Model - YOM-2GS |
|---|
| FOR SALE: Ad # 7734 , Year = 1991 , Make = Supermax , Model = YOM-2GS |
|
|
Category: Universal Mills (Horizontal / Vertical)
|
Capacity:
|
| Ad #
7734 |
| Year:
| 1991
|
| Make:
| Supermax
|
| Model:
| YOM-2GS
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 1991 YCM Supermax Model YOM-2GS combination knee type vertical, with horizontal spindle. 11" X 51" table, built in coolant system, auto lube, 85-3800 rpm, pendant arm control, 5HP horizontal and vertical spindles, 40 taper, 2 horizontal arbor supports, 1-1" arbor, 1-1/1/4" arbor with hard spacers, includes 1- 4.5" carbide face mill and 1- 6" carbide face mill, 6" swivel base vise, super spacer, power feeds to all axes.
|
| Electrical Description |
|
|
| Comments: |
- Just Reduced! Owner needs space!!! Excellent Machine!!!
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Kingston Model - KUD-540 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 7736 , Year = , Make = Kingston , Model = KUD-540 |
|
|
Category: Single Spindle Drill Press
|
Capacity:
|
| Ad #
7736 |
| Year:
|
|
| Make:
| Kingston
|
| Model:
| KUD-540
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Kingston Model KUD-540 Dril-Tap Machine, geared head,variable speed machine with power feed and foot switch for reverse tapping. Includes work light, and misc. tooling. Tapping speeds- 75-285, Drilling speeds- 165-1250
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - Make - Do-All Model - C-916 |
|---|
| FOR SALE: Ad # 6567 , Year = , Make = Do-All , Model = C-916 |
|
|
Category: Horizontal Band Saws
|
Capacity: Do-All Model C-916 , 9" round capacity manual horizontal bandsaw
|
| Ad #
6567 |
| Year:
|
|
| Make:
| Do-All
|
| Model:
| C-916
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Do-All Model C-916 horizontal bandsaw,with one new 1" X 159" blade, gravity downfeed, worklight, and coolant system.
|
| Electrical Description |
|
|
| Comments: |
- Saw is in storage and was barely used. Reduced! Owner needs space!!
|
|
|
| FOR SALE: Year - Make - MEC Model - MEC300ST |
|---|
| FOR SALE: Ad # 6563 , Year = , Make = MEC , Model = MEC300ST |
|
|
Category: Cold Saws & Power Hack Saws
|
Capacity: MEC Model MEC300ST non-ferrous cold saw, 12" blade , mitre cutting
|
| Ad #
6563 |
| Year:
|
|
| Make:
| MEC
|
| Model:
| MEC300ST
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Mec Model MEC300ST non-ferrous, mitre cutting cold saw, 12" blade, 230/460v, 3 phase. Head tilts for mitre cuts, saw is in good condition.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1977 Make - Grob Model - 4V-18 |
|---|
| FOR SALE: Ad # 6562 , Year = 1977 , Make = Grob , Model = 4V-18 |
|
|
Category: Vertical Band Saws
|
Capacity: Grob Vertical Bandsaw Model 4V18 with tilting table work light and RWP
|
| Ad #
6562 |
| Year:
| 1977
|
| Make:
| Grob
|
| Model:
| 4V-18
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Grob Model 4V-18 with tilting table, work light, 18" throat tilt table,RWP blade welder for cutting,welding and annealing blades from roll band stock. Saw is in good condition, 230/460 v, 3 phase.
|
| Electrical Description |
|
|
| Comments: |
- High quality USA made saw. Runs good, been in storage, and needs minor clean up.
|
|
|
| FOR SALE: Year - Make - ROLL-IN Model - |
|---|
| FOR SALE: Ad # 7737 , Year = , Make = ROLL-IN , Model = |
|
|
Category: Vertical Band Saws
|
Capacity:
|
| Ad #
7737 |
| Year:
|
|
| Make:
| ROLL-IN
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- ROLL-IN vertical with optional larger 3/4" blade and extra large table
|
| Electrical Description |
|
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Pratt & Whitney Model - M-1620-2A |
|---|
| FOR SALE: Ad # 6573 , Year = , Make = Pratt & Whitney , Model = M-1620-2A |
|
|
Category: Jig Grinders
|
Capacity: Pratt & Whitney Model M-1620-2A Jig Boring Machine
|
| Ad #
6573 |
| Year:
|
|
| Make:
| Pratt & Whitney
|
| Model:
| M-1620-2A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 7000??
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Pratt & Whitney Model M-1620-2A Manual Jig Boring Machine, 32 X 24 X 10 travels, 32 X 16 table, 1-1800 rpm, with excellent 16" tilting rotary table optional for $500.00. Includes t-bolts and tooling-Box of tooling included..
|
| Electrical Description |
|
|
| Comments: |
- Excellent price...Owner needs space
Rigger fee approx: 800.00
|
|
|
| FOR SALE: Year - Make - Royal Oak Model - R-O |
|---|
| FOR SALE: Ad # 6404 , Year = , Make = Royal Oak , Model = R-O |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Royal Oak Model R-O Form Releiving Grinder
|
| Ad #
6404 |
| Year:
|
|
| Make:
| Royal Oak
|
| Model:
| R-O
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold Sold USD
|
|
Buyers Premium:
A % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Please see web site www.royaloakgrinders.com for specifications, dimensions and complete description
|
| Electrical Description |
|
|
| Comments: |
- machine includes extra cams, collets, optional 10" optical comparator, and 2 axis acu-rite DRO
|
|
|
|
| Buyers Premium:
A % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1990 Make - Kinkenda Model - URB-100-A |
|---|
| FOR SALE: Ad # 7760 , Year = 1990 , Make = Kinkenda , Model = URB-100-A |
|
|
Category: Surface Grinders
|
Capacity: 39" x 14" grinding capacity
|
| Ad #
7760 |
| Year:
| 1990
|
| Make:
| Kinkenda
|
| Model:
| URB-100-A
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Kikenda Model URB-1000-A, 1990 model, Table travel 59" x 20", 12" x 38" variable hold electronic chuck with demagnetizer,built in hydraulics,coolant system, work light, 12 x 2 x 5 wheel,1680 RPM, Manuals and Schematics, over the wheel dresser, fully automatic machine
|
| Electrical Description |
|
|
| Comments: |
- Excellent
JUST REDUCED!! OWNER NEEDS SPACE!!
|
|
|
| FOR SALE: Year - Make - Model - |
|---|
| FOR SALE: Ad # 7762 , Year = , Make = , Model = |
|
|
Category: Belt & Disc Grinders
|
Capacity: various pedestal bench grinders and pedestall belt sanders
|
| Ad #
7762 |
| Year:
|
|
| Make:
|
|
| Model:
|
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- all name brands, several to choose from, very good condition
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Jacobsen Model - 8" X 18" Hydraulic |
|---|
| FOR SALE: Ad # 7739 , Year = , Make = Jacobsen , Model = 8" X 18" Hydraulic |
|
|
Category: Surface Grinders
|
Capacity: 8" x 18" permanenet magnetic chuck
|
| Ad #
7739 |
| Year:
|
|
| Make:
| Jacobsen
|
| Model:
| 8" X 18" Hydraulic
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Jacobsen 8" x 18" haudraulic surface grinder with
8" x 18" permanenet magnetic chuck, built in hydraulics, manual downfeed, 8" wheel, central lube, coolant ready, worklight
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1981 Make - Sunnen Model - MBB 1650 |
|---|
| FOR SALE: Ad # 7914 , Year = 1981 , Make = Sunnen , Model = MBB 1650 |
|
|
Category: Horizontal and Vertical Hones
|
Capacity: Sunnen Model MBB Horizontal Honing Machine, 1/8"-1" capacity
|
| Ad #
7914 |
| Year:
| 1981
|
| Make:
| Sunnen
|
| Model:
| MBB 1650
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 800
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Sunnen Model MBB 1650 Horizontal Honing Machine, 1/8"-1" capacity, .0001" tolerance, with cabinet and plenty of accessories and tooling.Very little use, Excellent machine!
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1999 Make - Sunnen Model - MBB-1660 |
|---|
| FOR SALE: Ad # 7733 , Year = 1999 , Make = Sunnen , Model = MBB-1660 |
|
|
Category: Horizontal and Vertical Hones
|
Capacity: Sunnen Precision Hone Model MBB-1660
|
| Ad #
7733 |
| Year:
| 1999
|
| Make:
| Sunnen
|
| Model:
| MBB-1660
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Sunnen precision hone model MBB-1660, without hones but includes square hone fixture model KNN-100
|
| Electrical Description |
|
|
| Comments: |
- Machine used very little and is in excellent condition
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1996 Make - Electo Arc Model - LBH |
|---|
| FOR SALE: Ad # 7746 , Year = 1996 , Make = Electo Arc , Model = LBH |
|
|
Category: Miscellaneous / Other
|
Capacity:
|
| Ad #
7746 |
| Year:
| 1996
|
| Make:
| Electo Arc
|
| Model:
| LBH
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Electro-Arc Tap disintegrater, Model LBH, under power, portable, works perfect
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - home made Model - de-burring tumbler |
|---|
| FOR SALE: Ad # 7745 , Year = , Make = home made , Model = de-burring tumbler |
|
|
Category: Miscellaneous / Other
|
Capacity: approx. 3 cu. ft.
|
| Ad #
7745 |
| Year:
|
|
| Make:
| home made
|
| Model:
| de-burring tumbler
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Gear drive, Baldor Drive Motor, heavy welded construction. WORKS GREAT
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Model - |
|---|
| FOR SALE: Ad # 7743 , Year = , Make = , Model = |
|
|
Category: Miscellaneous / Other
|
Capacity: Misc Steel and Tooling
|
| Ad #
7743 |
| Year:
|
|
| Make:
|
|
| Model:
|
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Large selection of all types of steel and misc. tooling
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Miller Model - CP-250 TS |
|---|
| FOR SALE: Ad # 7738 , Year = , Make = Miller , Model = CP-250 TS |
|
|
Category: Mig & Tig Arc Welders
|
Capacity: 250 Amp
|
| Ad #
7738 |
| Year:
|
|
| Make:
| Miller
|
| Model:
| CP-250 TS
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Miller Model CP-250 TS mig welder with oxygen tank and 8' boom. Machine used very little
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Sunnen Model - BP-10 |
|---|
| FOR SALE: Ad # 6392 , Year = , Make = Sunnen , Model = BP-10 |
|
|
Category: Hydraulic H-Frame Press
|
Capacity: 10 Ton Hyd "H" Frame Press
|
| Ad #
6392 |
| Year:
|
|
| Make:
| Sunnen
|
| Model:
| BP-10
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Sunnen 10 Ton Hydraulic H-Frame press
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1998 Make - Champion Model - 10 HP |
|---|
| FOR SALE: Ad # 7747 , Year = 1998 , Make = Champion , Model = 10 HP |
|
|
Category: Air Compressors, Piston Type
|
Capacity: 10 HP, 2 stage , 175psig
|
| Ad #
7747 |
| Year:
| 1998
|
| Make:
| Champion
|
| Model:
| 10 HP
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Champion 10HP, 2 stage air compressor mounted on 120 gallon tank, Max 175 psig. Runs great. Machine has been well maintained.
|
| Electrical Description |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 2000 Make - Faro Model - G08-02-"gold arm" |
|---|
| FOR SALE: Ad # 7027 , Year = 2000 , Make = Faro , Model = G08-02-"gold arm" |
|
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: 4' Faro-Arm Portable CMM with base +/- .051mm
|
| Ad #
7027 |
| Year:
| 2000
|
| Make:
| Faro
|
| Model:
| G08-02-"gold arm"
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 300lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- New, still in box 4' Faro-Arm Portable CMM, tolerance +/- .051mm tolerance, Model G08-02,software upgraded to revision 5.9 software, 2 extra keys, includes hard storage case, and heavy duty roll around base. Calabration attachment arms included.Was calibrated in 2003 not used only checked within .002
Includes everthing except a lap top..
Can be demoed if needed.
|
| Electrical Description |
|
|
| Comments: |
- Machine pictured is in use and not for sale. Identical machine is new and still in shipping container.Laptop computer not included.
|
|
|
| FOR SALE: Year - Make - Mitutoya Model - Grade AA Black Granite |
|---|
| FOR SALE: Ad # 7740 , Year = , Make = Mitutoya , Model = Grade AA Black Granite |
|
|
Category: Surface Plates
|
Capacity: 24" x 24" black granite with rolling stand grade AA
|
| Ad #
7740 |
| Year:
|
|
| Make:
| Mitutoya
|
| Model:
| Grade AA Black Granite
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1997 Make - Model - |
|---|
| FOR SALE: Ad # 7744 , Year = 1997 , Make = , Model = |
|
|
Category: General Material Handling
|
Capacity: 16' x 8' tandem axle trailer
|
| Ad #
7744 |
| Year:
| 1997
|
| Make:
|
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 16' X 8' tandem axle heavy duty trailer, 2" ball, pre-wired lights and electric brakes, spare tire mount. Excellent Condition
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Econo-Line Model - |
|---|
| FOR SALE: Ad # 7761 , Year = , Make = Econo-Line , Model = |
|
|
Category: Bead & Shot Blasters
|
Capacity: 36 long x 24" wide x 20" deep
|
| Ad #
7761 |
| Year:
|
|
| Make:
| Econo-Line
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- gloves in excellent condition, nozzles have very little use, 2 stage seperate dust collector, with bottom storage compaterment for bag, excellent system
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Cee-Gee Model - |
|---|
| FOR SALE: Ad # 7759 , Year = , Make = Cee-Gee , Model = |
|
|
Category: Cleaning Equipment
|
Capacity: 34" long x 22" x wide x 18" deep
|
| Ad #
7759 |
| Year:
|
|
| Make:
| Cee-Gee
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Cee-gee Parts Cleaner, 34" long x 22" wide x 18" deep, with 110v submersible pump,3, baffle compartments, and 3 dry shelves
|
| Electrical Description |
|
|
| Comments: |
- used very little, excellent
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Stanley-Vidmar Model - |
|---|
| FOR SALE: Ad # 7758 , Year = , Make = Stanley-Vidmar , Model = |
|
|
Category: Construction Machinery - All Types
|
Capacity: 11 Drawers, full support at full extension
|
| Ad #
7758 |
| Year:
|
|
| Make:
| Stanley-Vidmar
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- dividers availalable for buyers convenience
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Model - |
|---|
| FOR SALE: Ad # 7757 , Year = , Make = , Model = |
|
|
Category: Construction Machinery - All Types
|
Capacity: 36" x 48" 2" maple top work station w/ drawers
|
| Ad #
7757 |
| Year:
|
|
| Make:
|
|
| Model:
|
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 36" x 48" 2" thick maple top work station with storage drawers. 4 to choose from or lot price on all
|
| Comments: |
- very little use, excellent condition
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
