User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1989 Make - Mazak Model - AJV-25/405 |
---|
FOR SALE: Ad # 10207 , Year = 1989 , Make = Mazak , Model = AJV-25/405 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: AJV-25/405
|
Ad #
10207 |
Year:
| 1989
|
Make:
| Mazak
|
Model:
| AJV-25/405
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 20,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 21 x 49" table
30 tool magazine control: M-32 50 taper toolingfoot pedal
|
Electrical Description |
|
Comments: |
- cant be removed until summer 2010 in use
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1961/58 Make - Bridgeport Model - 9 x 42 step pully |
---|
FOR SALE: Ad # 9479 , Year = 1961/58 , Make = Bridgeport , Model = 9 x 42 step pully |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 42 , J-2 step pully head
|
Ad #
9479 |
Year:
| 1961/58
|
Make:
| Bridgeport
|
Model:
| 9 x 42 step pully
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- 9 x 42 table
J-2 step pully heads power feed X vise R-8 spindle rapid return motor/pulley on X
|
Electrical Description |
|
Comments: |
- 2 machines available very similiar. Ways look good.
|
|
|
FOR SALE: Year - 1962-61 Make - Bridgeport Model - 9 x 42 |
---|
FOR SALE: Ad # 9477 , Year = 1962-61 , Make = Bridgeport , Model = 9 x 42 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 42 variable speed head
|
Ad #
9477 |
Year:
| 1962-61
|
Make:
| Bridgeport
|
Model:
| 9 x 42
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | 4 x 4 x 8 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 9 x 42 table
chrome ways R-8 spindle power feeds on x, y, & knee vise 60-4200rpm w/ back gear 1-1/2 HP motor
|
Electrical Description |
|
Comments: |
- 2 units available
Nice units lots of life left in them, ways look very good, still see scrap markes well !
|
|
|
FOR SALE: Year - 1968 Make - Cincinnati Model - DL 500-266 |
---|
FOR SALE: Ad # 10206 , Year = 1968 , Make = Cincinnati , Model = DL 500-266 |
|
Category: Horizontal Mills
|
Capacity: 72" travel : 30" x 96" table w/ lots of cutters
|
Ad #
10206 |
Year:
| 1968
|
Make:
| Cincinnati
|
Model:
| DL 500-266
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 22,500
|
Dimension: L x W x H | 186" x 110" x 74" high |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- table size: 30 x 96"
travel-72" top of table to center line of spindle-0-36" quill Dia-10" Quill adj-3" spindle speeds-32 10-400 RPM 20-800RPM table feeds-infi variable-1.4 to 100IPM rapid traverse-100IPM Main motor 15/30 HP 2 arbor supports 3" bore auto table feed cycles auto spindle stop table control for reciprication 2 way feed cycles lub system flood coolant sys. all manuals Lots of tooling cutters
|
Electrical Description |
|
Comments: |
- this is agreat running machine needs no maintenence very well kept...
must be removed by april 15 ..we can load .... priced to sell!
|
|
|
FOR SALE: Year - 1969 Make - Cincinnatti-Heald Model - Hydro-Tel Mill # DK |
---|
FOR SALE: Ad # 10204 , Year = 1969 , Make = Cincinnatti-Heald , Model = Hydro-Tel Mill # DK |
|
Category: Vertical Bed Mills
|
Capacity: large travel-120"longitudinal x 30" cross
|
Ad #
10204 |
Year:
| 1969
|
Make:
| Cincinnatti-Heald
|
Model:
| Hydro-Tel Mill # DK
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 34,500
|
Dimension: L x W x H | 297" x 132" x 123" high |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- table: 143" x 28"
travel-120"longitudinal x 30" cross vertical head travel: 30" top of table to spindle nose min-max:18"-32" throat: 38-1/2" top of table to underside of cross slide: 17-7/8" spindle nose Dia: 5-1/16" 16 speeds speed range: 64-1100 RPM feeds: infinite1/2 to 120 ipm rapid traverse 120 IPM no tracer unit with machine
20 HP spindle 50 taper spindle W/ a few holders 7HP hyd. pump chip auger raised head from table top to spindle nose max 32" extended tracer bracket for depth control tracer to provide 32" to 62" range from centerline of spindle to centerline of tracer(not included)
|
Electrical Description |
|
Comments: |
- Very well maintained machine ! No issues runs great ..
hyd. fixture can be removed easily if not wanted. these machines must be removed by april 15th,,we will load..these are great machines very well maintained and ready to run...
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1994 ? Make - Oliver-Adrian Model - PT |
---|
FOR SALE: Ad # 9478 , Year = 1994 ? , Make = Oliver-Adrian , Model = PT |
|
Category: Tool & Cutter Grinders
|
Capacity: 3/8-3" Drill web Thinner machine
|
Ad #
9478 |
Year:
| 1994 ?
|
Make:
| Oliver-Adrian
|
Model:
| PT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- designed to thin webs of drill bits
Drill bit web thinner 3/8"-3" capacity
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1972 Make - Aronson Model - HD25A |
---|
FOR SALE: Ad # 9476 , Year = 1972 , Make = Aronson , Model = HD25A |
|
Category: Welding Positioners
|
Capacity: Heavy Duty 2500 Lb W/ tilt & rotate
|
Ad #
9476 |
Year:
| 1972
|
Make:
| Aronson
|
Model:
| HD25A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 6 x 5 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 30 x 30 table
mounted on caster to roll around remote hand pendant with 12" 3 jaw chuck mounted to table 15,000 lb-in torque on roation 31,875 max lb-in on tilt inherent overhang 2500lbs @90deg 6" from center line-max,470lbs@90deg @ 60" from center line Max
|
Electrical Description |
|
Comments: |
- Very nice heavy duty unit !
Unit sells new for over 20K
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|