|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1985 Make - Mazak Model - slant turn 30ATC-MC |
|---|
| FOR SALE: Ad # 14688 , Year = 1985 , Make = Mazak , Model = slant turn 30ATC-MC | 
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 20" swing x 60"centers
|
| Ad #
14688 |
| Year:
| 1985
|
| Make:
| Mazak
|
| Model:
| slant turn 30ATC-MC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 11,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mazak slant turn 30ATC Mill Center w/live tooling
Mazatrol T-3 Control,
16 Station Tool changer on turretChanger,
20’ swing,
60” centers,
C-axis,
30 hp main spindle,
5 hp power live tooling spindle
hydraulic 12" 3 jaw chuck
Specifications: std specs below please
verify
actual machine
MAZAK Slant-Turn 30 ATC M/C CNC Turning &
Mill Center
Swing Over Bed 18"
Distance Between Centers 60.6"
Cross Travel, X-Axis 13.2"
Z-Axis Travel 60"
C-Axis .001 Degrees
Tool Positions 16
Rotary Tool Spindle Drive 5 HP
Spindle Nose A2-8"
Spindle Hole Diameter 3.15"
Spindle Hole w/ Draw tube 2.75"
Spindle Speed Range 6-2200 RPM
Spindle Drive Motor 30 HP AC
Milling Spindle 1500 RPM
Milling Spindle Motor 5 HP
Feed Range 1-196 IPM
Rapid Feed Rate 393 IPM
Electrics 440/220/3/60
Approximate Dimensions 189"x74"x96"
Approximate Weight 11, 000 Lbs
EQUIPPED WITH:
Mazatrol T3 3-Axis CNC W/ CRT, Micro
Disk
Storage
12" 3-Jaw Chuck
C-Axis Spindle
Live Tooling For
Milling/Drilling/Tapping
16-Station Tool Changing Turret
Approx. 23 Tools: 6-Milling, 9-Boring,
8-
TurningLinear & Circular Interpolation
Programmable Tailstock W/ Built-In Live
Center
Tool Presetter
All Manuals
Splash Enclosure & Coolant System
Note: lots of live tooling & jaws included-
see
picture..runs great!
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2002 Make - Johnford Model - ST-70A |
|---|
| FOR SALE: Ad # 14686 , Year = 2002 , Make = Johnford , Model = ST-70A |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 19" x 62" w/15" chuck
|
| Ad #
14686 |
| Year:
| 2002
|
| Make:
| Johnford
|
| Model:
| ST-70A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 31000lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Johnford ST-70A turning center w/ live tooling
control:Fanuc 18I-T
Specifications:please verify below
specs
• Swing Over Bed 790mm (31.1")
• Swing Over Cross Slide 600mm (23.6")
• Cross Travel (X-Axis )320 (12.6")
• Longitudinal Travel (Z-
Axis)800/1200/1600
(31.5"/47.2"/63")
• Bar Capacity :115mm or 4.5" or 5"
without
tube
• Spindle Nose A2-8
• Spindle Bore 115 8"
• Spindle Speed, Step (s)Auto
• Hi-Lo-4,500 rpm
• Spindle Motor 30hp
• ATC 12
chip conveyor
RS232 port
Note:spindle liners included: 1-1/4 to 3-1/4"
&
tooling pictures w/ some live holders
chuck: 15" 3 jaw A2-8
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1999 Make - HH Roberts Model - TW32Q |
|---|
| FOR SALE: Ad # 14736 , Year = 1999 , Make = HH Roberts , Model = TW32Q |
|
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 10 x 50 table: 3 axis bed mill
|
| Ad #
14736 |
| Year:
| 1999
|
| Make:
| HH Roberts
|
| Model:
| TW32Q
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 7000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- HH Roberts cnc/manual bed mill
3 axis control
control: Anilam 3300MK
10 x 50 table
travels: 30"X,16"Y,22"Z
works manually or CNC
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Johnford Model - VMC-1600SHD |
|---|
| FOR SALE: Ad # 14690 , Year = , Make = Johnford , Model = VMC-1600SHD |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 63" x 43" travels:CAT 50
|
| Ad #
14690 |
| Year:
|
|
| Make:
| Johnford
|
| Model:
| VMC-1600SHD
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 41,000
|
| Dimension: L x W x H | 178" x 210" x 145" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Johnford VMC-1600SHD
std specs below -please verify actual
machine
table: 70.9" x 39.4"
X: 62.99 "
Y: 43.3 "
Z: 31.49 "
Power: 35/20hp
RPM: 4500 rpm
# ATC: 20
chip conveyor
Table-W: 37.37 "
Table-L: 70.86 "
Taper: CAT 50
table load 10,000lbs
Dimensions: 178" x 210" x 145"
Weight: 40,920 Lbs.
Control: CNC (Fanuc 18M CNC Control)
JOHNFORD VMC-1600SHD CNC Vertical
Machining
Center
Model: VMC-1600SHD
FEATURES:
Fanuc 18M CNC Control
20-Station Automatic Tool Changer
CAPACITY:
X-Axis Travel...... 62.99"
Y-Axis Travel...... 43.30"
Z-Axis Travel ........ 31.49"
Spindle Nose to Table Surface..5.9"-37.4"
Spindle Center to Column.. 45.27"
Table Size ............... 70.86" x 37.37"
Table Load Capacity ... 10,000 Lbs.
Spindle Speeds ......... 8,000RPM
Spindle Taper ........ CAT 50
Spindle Drive Motor .......... 20 HP /24HP
Rapid Feed, X,Y Axes ...... 708.66 IPM
Rapid Feed, Z-Axis ........ 472.44 IPM
Machine Dimensions......... 178" x 210"
Machine Height.............. 145"
Approx. Weight of Machine... 40,920 Lbs.
EQUIPPED WITH:
Fanuc 18M CNC Control
20-Station Automatic Tool Changer
Rigid Tapping
Hardened Ways
Automatic Central Lubrication
All Available Manuals
Note: lots of tooling included-shown
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - ? Make - Devlieg Model - 3A-Jigmil |
|---|
| FOR SALE: Ad # 14687 , Year = ? , Make = Devlieg , Model = 3A-Jigmil |
|
|
Category: Horizontal Boring Mills
|
Capacity: table: 30" x 48"
|
| Ad #
14687 |
| Year:
| ?
|
| Make:
| Devlieg
|
| Model:
| 3A-Jigmil
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 12000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Devlieg Jigmil #3A horizontal mill
table: 30" x 48"
travels: X-48" ,Y-36" Z-14"
3" spindle-5MT
vari speed inverter added to spindle speed
controller
rotating table
DRO added for line boring and drilling
Note: ball screws could be replaced to hold
tighter tolerances but ok for low tolerance
work
as is..
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1980? Make - Allsteel Model - 14' x 3/8" |
|---|
| FOR SALE: Ad # 14735 , Year = 1980? , Make = Allsteel , Model = 14' x 3/8" |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 14ft bed x 3/8" steel or 1/4" stainless
|
| Ad #
14735 |
| Year:
| 1980?
|
| Make:
| Allsteel
|
| Model:
| 14' x 3/8"
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 27,000?
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Allsteel Hyd. Shear 3/8-14
Capacity:14ft bed x 3/8" mild steel or 1/4"
stainless steel
40 HP motor
dual squaring arms 6ft & 4'
36" power back gage w/ mechanical display
electric foot switch
new bladed recently insalled spare set
included
but need sharpened
includes: roller sheet support table shown:
5'
x
10ft
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1967 Make - Cincinnati Model - 12-series x 10' |
|---|
| FOR SALE: Ad # 14685 , Year = 1967 , Make = Cincinnati , Model = 12-series x 10' |
|
|
Category: Press Brakes (Mechanical)
|
Capacity: 14ft x 230 ton
|
| Ad #
14685 |
| Year:
| 1967
|
| Make:
| Cincinnati
|
| Model:
| 12-series x 10'
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 36,000
|
| Dimension: L x W x H | 16'x6'x10'H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Cincinnati #12-series Mechanical press brake
14ft bed x 230 ton capacity
Hurco single axis back gage 36"
Overall Bending Length 168" Distance Between
Housings 144" Length of Stroke 3" Open Height 12"
Throat Depth 8" Shut Height 9" Overall Dimensions
16'x6'x10'H Weight (approx.) 36,000 lbs
Note: clutch mechanism recently rebuilt
light curtain
Note: no tooling included, needs slit/pit on
front
12" lip on front only
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1990? Make - Wiedemann Model - M5000 / P46018 |
|---|
| FOR SALE: Ad # 14691 , Year = 1990? , Make = Wiedemann , Model = M5000 / P46018 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 45 ton punch/plasma unit
|
| Ad #
14691 |
| Year:
| 1990?
|
| Make:
| Wiedemann
|
| Model:
| M5000 / P46018
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 35,000
|
| Dimension: L x W x H | 236" L x 190" D x 107 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Wiedemann M5000 / P46018 cnc turret punch/nibbler
w/plasma cutter will nibble at 450 hits a minute
in 18ga
std factory specs below-please verify actual
machine
45 TON MURATA WIEDEMANN TURRET PUNCH & LOAD /
UNLOAD SYSTEM
w/FANUC OP CNC CONTROL
MODEL: M5000
SPECIFICATIONS:
Tonnage ................. 45
Table travel ................... 62" x 74"
Maximum sheet size (without repositioning) 60"
x
72"
Maximum sheet size (with repositioning) 60" x
144"
Linear table speed ........ 2500 I.P.M.
Maximum sheet weight ........... 440 lbs.
Maximum material thickness ..... .375"
Ram stroke ..................... 1.25"
Stripper/die clearance ......... .875"
Number of turret stations ...... 32
Tooling style .................. 114
Hit rates continuous nibbling mode 450 per min
high
300 per min low
Hit rates on 1" centers ........ 200 per min
high
180 per min low
Turret rotation ................ 30 Rpm
Turret drive Bidirectional
Approximate machine only size 236" L x 190" D
x
107" H Approximate machine only weight 35,000
lbs.
Equipped With-please verify below!
Plasma 150 cutting system
Chip Auger
Fanuc Series 00-P Talkative CNC Control
Murata Wiedemann slug conveyor
Misc. tool holders
Misc. tooling & 2-large work tables one
hyd.folding type
dust collection system
runs good...every day!
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1984? Make - Sheffield Model - 1820 |
|---|
| FOR SALE: Ad # 14692 , Year = 1984? , Make = Sheffield , Model = 1820 |
|
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: granite table: 81" x 40"
|
| Ad #
14692 |
| Year:
| 1984?
|
| Make:
| Sheffield
|
| Model:
| 1820
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 5000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Sheffield CMM # 1820
table granite 81" x 40"
-cordax 1820 cmm:
-3 axis digital readout computer
-g&c remote control unit
-travels: x=78.7" y=35.4"/39.4"
z=15.8/27.6/39.4"
fully functional machine!!
includes computer & software
needs current calibration
dust cover
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
