|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2000 Make - Johnford Model - TC-35 |
|---|
| FOR SALE: Ad # 13531 , Year = 2000 , Make = Johnford , Model = TC-35 | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" chuck: 20" swing over bed: 30" centers
|
| Ad #
13531 |
| Year:
| 2000
|
| Make:
| Johnford
|
| Model:
| TC-35
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 14300
|
| Dimension: L x W x H | 122.64" x 63" x 77.76" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2000 Johnford TC-35 CNC Lathe
control: Fanuc 18T
10"-3 jaw Chuck
Swing : 20.8" over bed, 14.56 over cross
slide
Distance between centers: 30.9"
bar capacity/spindle bore: 3.05"
Spindle nose: A2-8
Speeds: HI-Low gear drive 30-3500 rpm
Spindle motor: 25/15HP
Tools in turret:12
cross travel X axis: 11.42"
Logitudinal Z travel: 25.59"
rapid traverse: X:15M/PM,Z:18M/PM
tailstock travel: 23.62"
Quill travel: 3.94"
tailstock taper: 5MT
bed incline: 45 deg
chip conveyor
no tool setter probe
Note: only issue known is turret only indexes
in reverse needs new solenoid for turret have
part-just not put on yet.
Run/cut time hrs as of 9-9-13: 3178..total on
time hrs: 15,406
manuals included
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 2006 Make - Johnford Model - SV-40 |
|---|
| FOR SALE: Ad # 13427 , Year = 2006 , Make = Johnford , Model = SV-40 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travels 41" x 20" x 24"
|
| Ad #
13427 |
| Year:
| 2006
|
| Make:
| Johnford
|
| Model:
| SV-40
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 18,000
|
| Dimension: L x W x H | 100 x 85 x 100" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2006 Johnford SV-40 Super Vertical Machining center
model#SV-40
Control: Fanuc OI-MC
Run time hrs as of 7-20-13 #4623(very low)
table size:51.2” x 27.6
Travels 41" x 20" x 24"
spindle taper:CAT 40
tool changer 20 tools
chip conveyor
spindle speed max:8,000RPM
thru spindle coolant-disconnected-can be hooked up easily-when spindle was replaced in 2011
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2007 Make - Johnford Model - SV-48H |
|---|
| FOR SALE: Ad # 13426 , Year = 2007 , Make = Johnford , Model = SV-48H |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: travels: 48" x 28" x 24.8 Z
|
| Ad #
13426 |
| Year:
| 2007
|
| Make:
| Johnford
|
| Model:
| SV-48H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 22,000lbs
|
| Dimension: L x W x H | 126 x 154" x |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2007 Johnford SV-48H vertical machining center
model # SV-48H
control: Fanuc OI-MC
control has block look ahead, position
restore,memory std. has compact flash memory on
cards
table size: 51 x 27"
travels: 48" x 28" x 24.8"
spindle taper: CAT 50
spindle speed: 60-6,000RPM hi-lo gear
spindle motor: 20HP
max tool dia in toolchanger: 5", 9.8" in
machine
chip conveyor
high pressure coolant-disconnected but easily
hooked up
Run time HRS as of 7-20-13 #4369(very low)
table load cap: 3300lbs
tool chager 24 station
over 150K new
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2010 Make - Okamoto Model - OGM8-20UB |
|---|
| FOR SALE: Ad # 13425 , Year = 2010 , Make = Okamoto , Model = OGM8-20UB |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: CNC: OD 8.5" swing x 20" centers
|
| Ad #
13425 |
| Year:
| 2010
|
| Make:
| Okamoto
|
| Model:
| OGM8-20UB
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 5500
|
| Dimension: L x W x H | 107 x 68 x 67 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Okomato CNC OD grinder
#OGM 8-20-UB
Control: Fanuc Oi-TB--ogmex software
swing over bed 8.5" dia
center dist: 20"
universal table
max turn dia: 7.87In
max weight between centers:44
travel X: 8.46"
swing angle: =- 30 deg
least travel increment(wheel head):0.00001 in
tapers=spindle-tailstock 3MT
spindle thru hole: 0.68 dia
spindle rpm: 15-500
motors: fanuc ac servo
auto lube
coolant/paper filter unit
required power 15kva
wheel dia 12" w/ 5" hole x 1 wide
all manuals
paper filter system
very nice machine -low usage
over 100k new
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
