|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1987 Make - St. Etienne Model - #H-1152N |
|---|
| FOR SALE: Ad # 3152 , Year = 1987 , Make = St. Etienne , Model = #H-1152N | 
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: ST. ETIENNE CNC LATHE
|
| Ad #
3152 |
| Year:
| 1987
|
| Make:
| St. Etienne
|
| Model:
| #H-1152N
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 38K ??
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MACHINE SPECIFICATIONS:
Swing Over Bed 45"
Swing over Cross Slides 26"
Distance Between Centers 13'(160")
Main Motor Drive 80 HP
Spindle Speeds 4 to 800 RPM
Hole In Spindle 4.5"
Max. Workpiece Weight w/2 steadies 38,200 lbs.
EQUIPPED WITH:
* 25" 3 Jaw Chuck
* 30" 4 Jaw Chuck
* 39" 4 Jaw Faceplate Chuck
* (5) Steady Rests
* Chip Conveyor
* Coolant System
* CNC Programable Quill On Tailstock
* Heavy Duty 4 Way CNC Controlled Toolpost
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1987 Make - St. Etienne Model - #H-1152N |
|---|
| FOR SALE: Ad # 3152 , Year = 1987 , Make = St. Etienne , Model = #H-1152N |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: ST. ETIENNE CNC LATHE
|
| Ad #
3152 |
| Year:
| 1987
|
| Make:
| St. Etienne
|
| Model:
| #H-1152N
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 38K ??
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MACHINE SPECIFICATIONS:
Swing Over Bed 45"
Swing over Cross Slides 26"
Distance Between Centers 13'(160")
Main Motor Drive 80 HP
Spindle Speeds 4 to 800 RPM
Hole In Spindle 4.5"
Max. Workpiece Weight w/2 steadies 38,200 lbs.
EQUIPPED WITH:
* 25" 3 Jaw Chuck
* 30" 4 Jaw Chuck
* 39" 4 Jaw Faceplate Chuck
* (5) Steady Rests
* Chip Conveyor
* Coolant System
* CNC Programable Quill On Tailstock
* Heavy Duty 4 Way CNC Controlled Toolpost
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1998 Make - Gildemeister Model - CTX 500 |
|---|
| FOR SALE: Ad # 10459 , Year = 1998 , Make = Gildemeister , Model = CTX 500 |
|
|
Category: Miscellaneous / Special Lathes
|
Capacity: Gildemeister Model CTX 500 - Dia 10"
|
| Ad #
10459 |
| Year:
| 1998
|
| Make:
| Gildemeister
|
| Model:
| CTX 500
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Gildemeister CTX #500
Turning Center - CNC
NEW: 1998 S/N #
WORKING RANGE - HEIDENHAIN Pilot 3190 CNC Control
12 station driven turrets 7.5kw
Swing above cover 26.76"
Maximum Turning Diameter 17.9"
Chuck Diameter 9.84"/12.34"
Maximum Transfer Diameter 10" 6"
Maximum Spacing between Spindles 55"
Spindle Speeds 18-3600 rpm
Turning Length 39.36"
Burener Coolant system and Chip Converyor
IFS #IFM-1000 Mist Collector
|
|
|
| FOR SALE: Year - 1998 Make - Gildemeister Model - CTX 500 |
|---|
| FOR SALE: Ad # 10459 , Year = 1998 , Make = Gildemeister , Model = CTX 500 |
|
|
Category: Miscellaneous / Special Lathes
|
Capacity: Gildemeister Model CTX 500 - Dia 10"
|
| Ad #
10459 |
| Year:
| 1998
|
| Make:
| Gildemeister
|
| Model:
| CTX 500
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Gildemeister CTX #500
Turning Center - CNC
NEW: 1998 S/N #
WORKING RANGE - HEIDENHAIN Pilot 3190 CNC Control
12 station driven turrets 7.5kw
Swing above cover 26.76"
Maximum Turning Diameter 17.9"
Chuck Diameter 9.84"/12.34"
Maximum Transfer Diameter 10" 6"
Maximum Spacing between Spindles 55"
Spindle Speeds 18-3600 rpm
Turning Length 39.36"
Burener Coolant system and Chip Converyor
IFS #IFM-1000 Mist Collector
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1993 Make - MAHO Model - MH600E2 |
|---|
| FOR SALE: Ad # 10492 , Year = 1993 , Make = MAHO , Model = MH600E2 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Maho Model MH600E2, 4-Axis, CNC Machining Center
|
| Ad #
10492 |
| Year:
| 1993
|
| Make:
| MAHO
|
| Model:
| MH600E2
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MAHO - MH 600E2
CNC Phillips 432 Control S/N
NEW: 1993
WORKING RANGE
Along horizontal X-axis 23.6"
Along vertical Y-axis 17.7"
Headstock traverse
Horizontal transverse Z-axis 17.7"
WORKSPINDLES
Tool Mounting ISO 40
Quill stroke of vertical workspindle 3.14"
Clamping force of tool clamp device ISO type B KN 12
SPINDLE SPEEDS and FEED RATES
Workspindle speeds directly programmable rpm 20-5000
Correcting of directly programmable speed (override) % 80-120
Feed rates, directly programmable (along X, Y, and Z)min 0.3/157.4
Rapid traverse along X,Y, and Z axes min 6
TOOL CHANGER
Number of magazine stations (disc magazine) 20
Tool diameter max 5.11"
CNC Control
Weight 7,931lbs
Four Axis
X: 23.6"
Y: 17.7"
Z: 17.7
MISC
Books and Manuals included
Has Elect issue--needs work
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Hauser Model - Type 5 |
|---|
| FOR SALE: Ad # 10462 , Year = , Make = Hauser , Model = Type 5 |
|
|
Category: Vertical Boring Mills
|
Capacity: Hauser Jig Borer Model Type 5, Table 30" X 35"
|
| Ad #
10462 |
| Year:
|
|
| Make:
| Hauser
|
| Model:
| Type 5
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 7000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Hauser Jig Borer, Type 5,30" X 30'
*** Very Good Condition***
Table Working Surface 30" X 35"
Longitudinal Table Travel 25"
Cross Travel 20"
Spindle Quill Travel 7"
Spindle Center to Column Ways 28.5"
Spindle Center to Column Below Ways 32"
Boring Cap 9"
Boring Speeds 45-2000RPM
Automatic Feeds per Rev. (6)
-.0008",.0014",.0020
-.0031",.0051" & .0080"
Weight 7000
|
|
|
| FOR SALE: Year - Make - Hauser Model - Type 5 |
|---|
| FOR SALE: Ad # 10462 , Year = , Make = Hauser , Model = Type 5 |
|
|
Category: Vertical Boring Mills
|
Capacity: Hauser Jig Borer Model Type 5, Table 30" X 35"
|
| Ad #
10462 |
| Year:
|
|
| Make:
| Hauser
|
| Model:
| Type 5
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 7000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Hauser Jig Borer, Type 5,30" X 30'
*** Very Good Condition***
Table Working Surface 30" X 35"
Longitudinal Table Travel 25"
Cross Travel 20"
Spindle Quill Travel 7"
Spindle Center to Column Ways 28.5"
Spindle Center to Column Below Ways 32"
Boring Cap 9"
Boring Speeds 45-2000RPM
Automatic Feeds per Rev. (6)
-.0008",.0014",.0020
-.0031",.0051" & .0080"
Weight 7000
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1960 Make - Giddings/Lewis Model - 350F - 65-06-F |
|---|
| FOR SALE: Ad # 10460 , Year = 1960 , Make = Giddings/Lewis , Model = 350F - 65-06-F |
|
|
Category: Horizontal Drilling Machines
|
Capacity: Giddings & Lewis Model 350F Type 65D6-F, 6" Spindle,196.5" Horz Travel
|
| Ad #
10460 |
| Year:
| 1960
|
| Make:
| Giddings/Lewis
|
| Model:
| 350F - 65-06-F
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Giddings and Lewis Horziontal Boring Mill-
Portable Floor Type
Model #350 F (Type #65-D6F) S/N #190-6261
New: 1960
**Good Mechanical Condition**
Machine Specifications:
Spindle Diameter 6"
Y Axis Vertical Travel of Head 120"
X Axis Horizontal Travel of Column 196.5"
Z axis Travel 23.9''
Spindle Taper 7''
Morse Spindle 5
Horse power of Spindle (24 Amp) 20
Maximum Helix Angle with Standard Guides 45
degrees
Max Speed 8.3 - 500 rpm
Approximate Gross Weigh 50,000 lbs
Machine is Equipped:
* Books and manuals
* No Head Attachments
* No Tailstock. DRO
* No update on electronics, mounted on machine,
portable plug-in
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Do-All Model - 1612-3 |
|---|
| FOR SALE: Ad # 10458 , Year = , Make = Do-All , Model = 1612-3 |
|
|
Category: Vertical Band Saws
|
Capacity: Do-All Model 1612-3, 16" throat" Vertical Band Saw
|
| Ad #
10458 |
| Year:
|
|
| Make:
| Do-All
|
| Model:
| 1612-3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1700
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Do-All Vertical Band Saw, Model# 1612-3, 30.5" x 24"
Table Size 30.5" x 24"
Throat Depth 16"
Height Under Cast 12"
Hydraulic Feed To Table
Table Feed 12"
Speeds 25-6100RPM
Manual Band Tension
Table Cap 250 lbs
|
|
|
We found 17 matching ads. Now displaying the remaining 17 ads.
| FOR SALE: Year - Make - Technica Model - ZSM 159 |
|---|
| FOR SALE: Ad # 10508 , Year = , Make = Technica , Model = ZSM 159 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Technica Center Grinder Model ZSM 150
|
| Ad #
10508 |
| Year:
|
|
| Make:
| Technica
|
| Model:
| ZSM 159
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Technica Center Grinder Model ZSM 150
Max. work piece length 42"
Min. work piece length 2"
Tailstock center height to guide way 5.7"
Tailstock center height to slide(vise) 2.6"
Max. dia. of ground center hole mouth .08"
Grinding spindle speeds 45,000/22,500
-13,000RPM
Hollow spindle speed 400RPM
Dia. of grinding cone .6" ,1.06",1.6"
Machine weight 1,000lbs
|
|
|
| FOR SALE: Year - Make - Sunderland/Arter Model - D12 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10513 , Year = , Make = Sunderland/Arter , Model = D12 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Sunderland/Arter Model D12 Grinder
|
| Ad #
10513 |
| Year:
|
|
| Make:
| Sunderland/Arter
|
| Model:
| D12
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
|
|
| FOR SALE: Year - Make - Sunderland/Arter Model - D12 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10513 , Year = , Make = Sunderland/Arter , Model = D12 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Sunderland/Arter Model D12 Grinder
|
| Ad #
10513 |
| Year:
|
|
| Make:
| Sunderland/Arter
|
| Model:
| D12
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
|
|
| FOR SALE: Year - Make - Studer Model - Model RHU-450 |
|---|
| FOR SALE: Ad # 10507 , Year = , Make = Studer , Model = Model RHU-450 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap
|
| Ad #
10507 |
| Year:
|
|
| Make:
| Studer
|
| Model:
| Model RHU-450
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
|
| FOR SALE: Year - Make - Studer Model - Model RHU-450 |
|---|
| FOR SALE: Ad # 10507 , Year = , Make = Studer , Model = Model RHU-450 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap
|
| Ad #
10507 |
| Year:
|
|
| Make:
| Studer
|
| Model:
| Model RHU-450
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
|
| FOR SALE: Year - Make - Holroyd Model - 24" |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10503 , Year = , Make = Holroyd , Model = 24" |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Holroyd Model 24'' Profile Grinder
|
| Ad #
10503 |
| Year:
|
|
| Make:
| Holroyd
|
| Model:
| 24"
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Holroyd Profile Grinder
New: S/N #16429
Max Dia of Cutter 24''
Diameter of Grinding Wheel 7''
Width of Grinding Wheel 1/16''
Speed of Grinding Wheel 2800 RPM
HP of Motor 1/4 HP
Floor Space Requirements 3' 6'' x 4' 0''
Machine Equipped With
* Books/Manuals
|
|
|
| FOR SALE: Year - Make - Holroyd Model - 24" |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10503 , Year = , Make = Holroyd , Model = 24" |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Holroyd Model 24'' Profile Grinder
|
| Ad #
10503 |
| Year:
|
|
| Make:
| Holroyd
|
| Model:
| 24"
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Holroyd Profile Grinder
New: S/N #16429
Max Dia of Cutter 24''
Diameter of Grinding Wheel 7''
Width of Grinding Wheel 1/16''
Speed of Grinding Wheel 2800 RPM
HP of Motor 1/4 HP
Floor Space Requirements 3' 6'' x 4' 0''
Machine Equipped With
* Books/Manuals
|
|
|
| FOR SALE: Year - Make - Pratt & Whitney Model - R#6 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10499 , Year = , Make = Pratt & Whitney , Model = R#6 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Pratt & Whitney Model R6, Cutter Radius Grinder
|
| Ad #
10499 |
| Year:
|
|
| Make:
| Pratt & Whitney
|
| Model:
| R#6
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pratt & Whitney Cutter & Radius Grinder
Model #R6
Maximum Flute Length 4 1/2"
Axial Travel 4 1/2"
Vertical Adjustment 5 3/8"
Cross Travel 6 1/4"
Rack & Pinion Feed 4"
Screw Feed 2 1/4"
Work Table Size 6 1/2"x11"
Graduated Swivel Range 210 Degrees
Longitudinal Adjustment 3 1/4"
Cross Adjustment 1 1/4"
Wheel Spindle Speed 5200rpm
3/4 HP Spindle Drive 220/440/3/60
|
|
|
| FOR SALE: Year - 1973 Make - Okamoto Model - 618 |
|---|
| FOR SALE: Ad # 10494 , Year = 1973 , Make = Okamoto , Model = 618 |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: Okamoto Model 6x18, Surface Grinder, Auto Feed, Magnetic Chuck
|
| Ad #
10494 |
| Year:
| 1973
|
| Make:
| Okamoto
|
| Model:
| 618
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- OKAMOTO SURFACE GRINDER
MODEL #618 AUTO S/N 6835 NEW: 1973
***AUTO FEED***
Table size 6" x 12"
Longitudinal Travel 18"
Cross Travel 6"
Max. Distance from Table to Spindle Center 11"
Max. Grinding Wheel Dim. 8"x1"
Spindle Speed 2400RPM
*Auto Feed
*Filtration System
*Magnetic Chuck
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1973 Make - Okamoto Model - 618 |
|---|
| FOR SALE: Ad # 10494 , Year = 1973 , Make = Okamoto , Model = 618 |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: Okamoto Model 6x18, Surface Grinder, Auto Feed, Magnetic Chuck
|
| Ad #
10494 |
| Year:
| 1973
|
| Make:
| Okamoto
|
| Model:
| 618
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- OKAMOTO SURFACE GRINDER
MODEL #618 AUTO S/N 6835 NEW: 1973
***AUTO FEED***
Table size 6" x 12"
Longitudinal Travel 18"
Cross Travel 6"
Max. Distance from Table to Spindle Center 11"
Max. Grinding Wheel Dim. 8"x1"
Spindle Speed 2400RPM
*Auto Feed
*Filtration System
*Magnetic Chuck
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Hybco Model - 1900 |
|---|
| FOR SALE: Ad # 10473 , Year = , Make = Hybco , Model = 1900 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Hybco Model 1900 Heavy Duty Universal Grinder
|
| Ad #
10473 |
| Year:
|
|
| Make:
| Hybco
|
| Model:
| 1900
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- HYBCO UNIVERSIAL TOOL AND CUTTER GRINDER
MODEL #1900 S/N TG257
***Relief Grinder Attachement***
SPECIFICATIONS:
Table Working Surface: 6" x 36"
Longitudinal Travel: 14-1/2"
Cross Travel: 8-1/4"
Grinding Spindle, Vertical Travel: 7-1/4"
Grinding Spindle Rotation: 360 Degrees
Grinding Spindle Tilt, either side of horizontal: 25 Degrees
Grinding Spindle Speeds: 3800-6400 RPM
Grinding Spindle Motor: 1.5 HP, 230/460/3/60/, 3430 RPM
Grinding Wheel Maximum Diameter: 7"
Grinding Spindle Taper: 3" per foot
Floor Space: 55" x 72"
Approx. Weight: 2000 lbs.
EQUIPPED WITH
Model 2100SB Two-Way Relieving Fixture, S/N: RF-1291
Spindle Center Height.................7-1/2"
Erickson Collet Capacity..............1-5/8" Thru Spindle
Maximum Diameter Between Centers......4"
Maximum Length Between Centers........11"
1-1/2 HP Spindle Motor, 3150 RPM 230/460/60/3
LOTS OF TOOLING (SEE PHOTOS)
|
|
|
| FOR SALE: Year - Make - Hybco Model - 1900 |
|---|
| FOR SALE: Ad # 10473 , Year = , Make = Hybco , Model = 1900 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Hybco Model 1900 Heavy Duty Universal Grinder
|
| Ad #
10473 |
| Year:
|
|
| Make:
| Hybco
|
| Model:
| 1900
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- HYBCO UNIVERSIAL TOOL AND CUTTER GRINDER
MODEL #1900 S/N TG257
***Relief Grinder Attachement***
SPECIFICATIONS:
Table Working Surface: 6" x 36"
Longitudinal Travel: 14-1/2"
Cross Travel: 8-1/4"
Grinding Spindle, Vertical Travel: 7-1/4"
Grinding Spindle Rotation: 360 Degrees
Grinding Spindle Tilt, either side of horizontal: 25 Degrees
Grinding Spindle Speeds: 3800-6400 RPM
Grinding Spindle Motor: 1.5 HP, 230/460/3/60/, 3430 RPM
Grinding Wheel Maximum Diameter: 7"
Grinding Spindle Taper: 3" per foot
Floor Space: 55" x 72"
Approx. Weight: 2000 lbs.
EQUIPPED WITH
Model 2100SB Two-Way Relieving Fixture, S/N: RF-1291
Spindle Center Height.................7-1/2"
Erickson Collet Capacity..............1-5/8" Thru Spindle
Maximum Diameter Between Centers......4"
Maximum Length Between Centers........11"
1-1/2 HP Spindle Motor, 3150 RPM 230/460/60/3
LOTS OF TOOLING (SEE PHOTOS)
|
|
|
| FOR SALE: Year - Make - Heald Model - #22 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10463 , Year = , Make = Heald , Model = #22 |
|
|
Category: Surface Grinders
|
Capacity: Heald Model 22 Rotary Surface Grinder, 12" Chuck
|
| Ad #
10463 |
| Year:
|
|
| Make:
| Heald
|
| Model:
| #22
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- HEALD ROTARY SURFACE GRINDER
MODEL #-22 S/N 13006
SPECIFICATIONS:
Table 13"
Width of Wheel 1"
Max. Wheel 12"
Max. Table Tilting Angle 10 degrees
Max. Swing in Pan 16"
MACHINE IS EQUIPPED WITH THE FOLLOWING:
* 12" Magnetic Chuck
* 1/2" Chuck Life
* Tilting Table
* Coolant Tank
* 240V
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Cincinnati-Chomienn Model - RC |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10456 , Year = , Make = Cincinnati-Chomienn , Model = RC |
|
|
Category: Jig Grinders
|
Capacity: Cincinnati/Chomienn Model RC Center Hole Grinder,36"x6"
|
| Ad #
10456 |
| Year:
|
|
| Make:
| Cincinnati-Chomienn
|
| Model:
| RC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- CINCINNATI/CHOMIENN CENTER HOLE GRINDING MACHINE
MODEL# RC
MACHINE SPECIFICATIONS:
Dimensions 36"x6" O.D.
|
|
|
| FOR SALE: Year - Make - Heald Model - #22 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10463 , Year = , Make = Heald , Model = #22 |
|
|
Category: Surface Grinders
|
Capacity: Heald Model 22 Rotary Surface Grinder, 12" Chuck
|
| Ad #
10463 |
| Year:
|
|
| Make:
| Heald
|
| Model:
| #22
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- HEALD ROTARY SURFACE GRINDER
MODEL #-22 S/N 13006
SPECIFICATIONS:
Table 13"
Width of Wheel 1"
Max. Wheel 12"
Max. Table Tilting Angle 10 degrees
Max. Swing in Pan 16"
MACHINE IS EQUIPPED WITH THE FOLLOWING:
* 12" Magnetic Chuck
* 1/2" Chuck Life
* Tilting Table
* Coolant Tank
* 240V
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Cincinnati-Chomienn Model - RC |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10456 , Year = , Make = Cincinnati-Chomienn , Model = RC |
|
|
Category: Jig Grinders
|
Capacity: Cincinnati/Chomienn Model RC Center Hole Grinder,36"x6"
|
| Ad #
10456 |
| Year:
|
|
| Make:
| Cincinnati-Chomienn
|
| Model:
| RC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- CINCINNATI/CHOMIENN CENTER HOLE GRINDING MACHINE
MODEL# RC
MACHINE SPECIFICATIONS:
Dimensions 36"x6" O.D.
|
|
|
| FOR SALE: Year - 1981 Make - Blanchard Model - 22D42 |
|---|
| FOR SALE: Ad # 10445 , Year = 1981 , Make = Blanchard , Model = 22D42 |
|
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: Blanchard Model 42 Vertical-Spindle Rotary Surface Grinder, 42" Chuck
|
| Ad #
10445 |
| Year:
| 1981
|
| Make:
| Blanchard
|
| Model:
| 22D42
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 11'8" x 7'x10.3 |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- EQUIPPED WITH:
42" Diameter Magnetic Chuck w/Variable Neutrofier
50 HP Spindle Motor (Optional)
23" Vertical Range
22" Segmented Grinding Wheel
20" Cylindrical Grinding Wheel
Trabon Automatic Lubrication
Coolant System w/Magnetic Seperator
CATALOGUE SPECIFICATIONS:
Magnetic Chuck, Diamete 42"
Swing Between Coolant-Guards 48"
Magnetic Chuck Work Load Capacity 3000 lbs
Grinding Vertical Range, Maximum 23"
Grinding Wheel Speed 720 RPM
(6) Chuck Speeds, Range 6 to 33 RPM
Power Down Feeds, Range .004 to .080 IPM
Down Feed Before Feed Trips, Max .298"
Spindle Motor, Horsepower 50 HP
Chuck Rotation Motor 3 HP
Electrical System 460/3/60
Overall Dimensions, L x W 11'8" x 7'
Overall Height 10'1"
Weight, Approximately 14,500 lbs
1,066.80 mm BLANCHARD VERTICAL-SPINDLE ROTARY SURFACE GRINDER
New 1981, Serial No # Model 22D42
EQUIPPED WITH:
1,066.80 mm Diameter Magnetic Chuck w/Variable Neutrofier
50 HP Spindle Motor (Optional)
584.20 mm Vertical Range
22" Segmented Grinding Wheel
20" Cylindrical Grinding Wheel
Trabon Automatic Lubrication
Coolant System w/Magnetic Seperator
CATALOGUE SPECIFICATIONS:
Magnetic Chuck, Diamete 1,066.80 mm
Swing Between Coolant-Guards 1,219.20 mm
Magnetic Chuck Work Load Capacity 1,360.78 kg
Grinding Vertical Range, Maximum 584.20 mm
Grinding Wheel Speed 720 RPM
(6) Chuck Speeds, Range 6 to 33 RPM
Power Down Feeds, Range .004 to .080 IPM
Down Feed Before Feed Trips, Max 7.57 mm
Spindle Motor, Horsepower 50 HP
Chuck Rotation Motor 3 HP
Electrical System 460/3/60
Overall Dimensions, L x W 35.97 m
Overall Height 30.78 m
Weight, Approximately 6,577.09 kg
|
| Electrical Description |
|
|
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| FOR SALE: Year - Make - Acme Model - VS15T48S |
|---|
| FOR SALE: Ad # 10448 , Year = , Make = Acme , Model = VS15T48S |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Acme Model 15 Ton, Vertical Hydraulic Broach
|
| Ad #
10448 |
| Year:
|
|
| Make:
| Acme
|
| Model:
| VS15T48S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- ACME VERTICAL HYDRAULIC BROACH
MODEL# VS15T48 S/N #
***GOOD CONDITION***
SPECIFICATIONS:
Max. Stroke 48"
Tonnage Capacity 15 TON
|
|
|
| FOR SALE: Year - 1963 Make - Colonial Model - RD15-66 |
|---|
| FOR SALE: Ad # 10457 , Year = 1963 , Make = Colonial , Model = RD15-66 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Colonial Model RD15-66, 15 Ton, Hydraulic Pull-Down Vertical Broach
|
| Ad #
10457 |
| Year:
| 1963
|
| Make:
| Colonial
|
| Model:
| RD15-66
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 8'9 x 4'6" x 16'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- COLONIAL HYDRAULIC PULL-DOWN VERTICAL BROACHING
MACHINE
MODEL# RD15-66 S/N # NEW: 1963
CATALOGUE SPECIFICATIONS:
Tonnage Capacity, Normal 15 TON
Pulling Capacity, Peak 41300 LBS
Stroke Length, Maximum 66"
Main Cylinder Diameter 7.25"
Broaching Speeds, Cutting 20 FPM
Broaching Speed, Return 40 FPM
Hydraulic Motor, Horsepower 30 HP
Floor Space Required, L x D 8'9 x 4'6"
Overall Height 16'2"
Weight, Approximately 18500 LBS
EQUIPPED WITH:
* Variable Speed Controls
* Hardened & Ground Ways
* Chip Conveyor
* Coolant System
|
|
|
| FOR SALE: Year - 1981 Make - Astro Model - ABV24-4-70 |
|---|
| FOR SALE: Ad # 10450 , Year = 1981 , Make = Astro , Model = ABV24-4-70 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Astro Broach Model ABV24-4-70, 4-ton Vertical Hydraulic Broach
|
| Ad #
10450 |
| Year:
| 1981
|
| Make:
| Astro
|
| Model:
| ABV24-4-70
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 3'10" x 5'6"x9'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- ASTRO (B&H) 4 TON VERTICAL HYDRAULIC BROACH
Model ABV24-4-70, NEW: 1981, Rebuilt 1988
CATALOGUE SPECIFICATIONS:
Tonnage Capacity 4 TONS
Maximum Stroke Length 24"
Ram Travel, Adjustable 2" to 26"
Cutting Speed, Variable 0 to 70 FPM
Return Speed 140 FPM
Slide Width 4"
Slide Length 36"
Oil Reservoir Capacity 80 GALLONS
Coolant Reservoir Capacity 20 GALLONS
Overall Dimensions, W x D 3'10" x 5'6"
Overall Height 9'2"
Weight, Approximately 3000 LBS
EQUIPPED WITH:
* Power Clamping
* Stroke Counter
* Dual Palm Button Controls
* Hydraulic Cutting Pressure Gauge
* "Dial-In" Stroke Control
* Trabon Automatic Lube System w/Clamp Pressure
And Accessory Regulator
And Gages
* Coolant System (Built-In)
|
|
|
| FOR SALE: Year - 1981 Make - American Model - Model VPD-4X24 |
|---|
| FOR SALE: Ad # 10449 , Year = 1981 , Make = American , Model = Model VPD-4X24 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: American Broach Model 4 Ton Vertical Broach
|
| Ad #
10449 |
| Year:
| 1981
|
| Make:
| American
|
| Model:
| Model VPD-4X24
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- AMERICAN 4 TON VERTICAL HYDRAULIC BROACH
Model VPD-4X24, S/N # NEW 1981
CATALOGUE SPECIFICATIONS:
Tonnage Capacity 4 Tons
Maximum Stroke Length 24"
Coolant Reservoir Capacity 25 Gal.
Hydraulic Motor Horsepower 25 HP
Electical System 460/3/60
EQUIPPED WITH:
Zaytra Parts Loader & Gripper w/Conveyor
Automatic & Manual Mode Retriever
Coolant System (Built-In)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1981 Make - Astro Model - Model ABV24-2-70 |
|---|
| FOR SALE: Ad # 10451 , Year = 1981 , Make = Astro , Model = Model ABV24-2-70 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Astro Broach Model ABV24-2-70, 4 TON VERTICAL HYDRAULIC BROACH
|
| Ad #
10451 |
| Year:
| 1981
|
| Make:
| Astro
|
| Model:
| Model ABV24-2-70
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 3'10" x 5'6" x 9'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- ASTRO (B&H) 4 TON VERTICAL HYDRAULIC BROACH
Model ABV24-2-70, NEW: 1981
S/N #
CATALOGUE SPECIFICATIONS:
Tonnage Capacity 2 TONS
Maximum Stroke Length 24"
Ram Travel, Adjustable 2" to 26"
Cutting Speed, Variable 0 to 70 FPM
Return Speed 140 FPM
Slide Width 4"
Slide Length 36"
Oil Reservoir Capacity 80 GALLONS
Coolant Reservoir Capacity 20 GALLONS
Hydraulic Motor Horsepower 15 HP
Electrical System 208-220/440/3/60
Overall Dimensions, W x D 3'10" x 5'6"
Overall Height 9'2"
Weight, Approximately 3000 lbs
EQUIPPED WITH:
* Power Clamping
* Stroke Counter
* Dual Palm Button Controls
* Hydraulic Cutting Pressure Gauge
* "Dial-In" Stroke Control
* Trabon Automatic Lube System w/Clamp Pressure And Accessory Regulator
And Gages
* Coolant System (Built-In)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Acme Model - VS15T48S |
|---|
| FOR SALE: Ad # 10448 , Year = , Make = Acme , Model = VS15T48S |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Acme Model 15 Ton, Vertical Hydraulic Broach
|
| Ad #
10448 |
| Year:
|
|
| Make:
| Acme
|
| Model:
| VS15T48S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- ACME VERTICAL HYDRAULIC BROACH
MODEL# VS15T48 S/N #
***GOOD CONDITION***
SPECIFICATIONS:
Max. Stroke 48"
Tonnage Capacity 15 TON
|
|
|
| FOR SALE: Year - 1981 Make - Astro Model - Model ABV24-2-70 |
|---|
| FOR SALE: Ad # 10451 , Year = 1981 , Make = Astro , Model = Model ABV24-2-70 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Astro Broach Model ABV24-2-70, 4 TON VERTICAL HYDRAULIC BROACH
|
| Ad #
10451 |
| Year:
| 1981
|
| Make:
| Astro
|
| Model:
| Model ABV24-2-70
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 3'10" x 5'6" x 9'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- ASTRO (B&H) 4 TON VERTICAL HYDRAULIC BROACH
Model ABV24-2-70, NEW: 1981
S/N #
CATALOGUE SPECIFICATIONS:
Tonnage Capacity 2 TONS
Maximum Stroke Length 24"
Ram Travel, Adjustable 2" to 26"
Cutting Speed, Variable 0 to 70 FPM
Return Speed 140 FPM
Slide Width 4"
Slide Length 36"
Oil Reservoir Capacity 80 GALLONS
Coolant Reservoir Capacity 20 GALLONS
Hydraulic Motor Horsepower 15 HP
Electrical System 208-220/440/3/60
Overall Dimensions, W x D 3'10" x 5'6"
Overall Height 9'2"
Weight, Approximately 3000 lbs
EQUIPPED WITH:
* Power Clamping
* Stroke Counter
* Dual Palm Button Controls
* Hydraulic Cutting Pressure Gauge
* "Dial-In" Stroke Control
* Trabon Automatic Lube System w/Clamp Pressure And Accessory Regulator
And Gages
* Coolant System (Built-In)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2003 Make - American Model - Model H40-90 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10446 , Year = 2003 , Make = American , Model = Model H40-90 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: American Broach Model 40/90, Panelview 600 PLC Controler
|
| Ad #
10446 |
| Year:
| 2003
|
| Make:
| American
|
| Model:
| Model H40-90
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 31' x 6'x5'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 40 TON AMERICAN CNC HYDRAULIC HORIZONTAL BROACH
New 2003, Serial # Model H40-90
EQUIPPED WITH:
Allen Bradley PLC Panel View 600 Touch Screen Control
American Outer Support
American Automatic BCT Puller
American Automatic BCT Retriever
Hydraulic Oil Cooling System
Coolant Filtration System
Magnetic Chip Conveyor
CATALOGUE SPECIFICATIONS:
Tonnage Capacity, Normal 40 TON
Tonnage Capacity, Maximum 47 TON
Stroke Length, Maximum 90"
Face Plate Width 28"
Face Plate Bore 12"
Clearance Between Ways 14"
Broaching Speeds Variable, Range 0 to 30 FPM
Broach Return Speed, Maximum 60 FPM
Work Height 37"
Hydraulic Motor, Horsepower 50 HP
Floor Space Required, L x D 31' x 6'
Overall Height 5'2"
Weight, Approximately 22,700 lbs
NOTE: Replacement Price Is Over $400,000.00 with tooling.
|
|
|
| FOR SALE: Year - 2003 Make - American Model - Model H40-90 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 10446 , Year = 2003 , Make = American , Model = Model H40-90 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: American Broach Model 40/90, Panelview 600 PLC Controler
|
| Ad #
10446 |
| Year:
| 2003
|
| Make:
| American
|
| Model:
| Model H40-90
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 31' x 6'x5'2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 40 TON AMERICAN CNC HYDRAULIC HORIZONTAL BROACH
New 2003, Serial # Model H40-90
EQUIPPED WITH:
Allen Bradley PLC Panel View 600 Touch Screen Control
American Outer Support
American Automatic BCT Puller
American Automatic BCT Retriever
Hydraulic Oil Cooling System
Coolant Filtration System
Magnetic Chip Conveyor
CATALOGUE SPECIFICATIONS:
Tonnage Capacity, Normal 40 TON
Tonnage Capacity, Maximum 47 TON
Stroke Length, Maximum 90"
Face Plate Width 28"
Face Plate Bore 12"
Clearance Between Ways 14"
Broaching Speeds Variable, Range 0 to 30 FPM
Broach Return Speed, Maximum 60 FPM
Work Height 37"
Hydraulic Motor, Horsepower 50 HP
Floor Space Required, L x D 31' x 6'
Overall Height 5'2"
Weight, Approximately 22,700 lbs
NOTE: Replacement Price Is Over $400,000.00 with tooling.
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1982 Make - Klingelnberg Model - Model LRK 631 |
|---|
| FOR SALE: Ad # 10491 , Year = 1982 , Make = Klingelnberg , Model = Model LRK 631 |
|
|
Category: Lapping & Polishing Machines
|
Capacity: Klingelnberg Model LRK 631 Lapper
|
| Ad #
10491 |
| Year:
| 1982
|
| Make:
| Klingelnberg
|
| Model:
| Model LRK 631
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- KLINGELNBERG LAPPER
LAPPER FOR STRAIGHT & SPIRAL BEVEL GEARS
MODEL# LKR-631 S/N 1951 NEW: 1982
MACHINE SPECIFICATIONS:
Largest gear diameter 1:10 25"
Largest gear diameter 1:1 17.7"
Axial Offset 4"
Pinion Spindle Speeds 400-2100 RPM
Machine w/accessories 12,000 lbs
MACHINE IS EQUIPPED WITH THE FOLLOWNG:
* Hydraulic pressure unit
* Lapping fluid feeder
* Electrical Box
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1982 Make - Klingelnberg Model - Model LRK 631 |
|---|
| FOR SALE: Ad # 10491 , Year = 1982 , Make = Klingelnberg , Model = Model LRK 631 |
|
|
Category: Lapping & Polishing Machines
|
Capacity: Klingelnberg Model LRK 631 Lapper
|
| Ad #
10491 |
| Year:
| 1982
|
| Make:
| Klingelnberg
|
| Model:
| Model LRK 631
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- KLINGELNBERG LAPPER
LAPPER FOR STRAIGHT & SPIRAL BEVEL GEARS
MODEL# LKR-631 S/N 1951 NEW: 1982
MACHINE SPECIFICATIONS:
Largest gear diameter 1:10 25"
Largest gear diameter 1:1 17.7"
Axial Offset 4"
Pinion Spindle Speeds 400-2100 RPM
Machine w/accessories 12,000 lbs
MACHINE IS EQUIPPED WITH THE FOLLOWNG:
* Hydraulic pressure unit
* Lapping fluid feeder
* Electrical Box
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Jones/Shipman Model - 6x42 |
|---|
| FOR SALE: Ad # 10490 , Year = , Make = Jones/Shipman , Model = 6x42 |
|
|
Category: Lapping & Polishing Machines
|
Capacity: Jones & Shipman Model 6x42 Center Hole Lapper
|
| Ad #
10490 |
| Year:
|
|
| Make:
| Jones/Shipman
|
| Model:
| 6x42
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Jones & Shipman Center Hole Grinder
Cone Angle Center Hole 60 degrees
Max. Diameter Center Holes 1"
Max. Work Piece Length 42"
Min. Work Piece Length 1.5"
Tailstock center to guide way 6.5"
Motor pulley 2-5/8"
Spindle pulley 5"
-745RPM
Motor pulley 3-13/16"
Spindle pulley 3-13/16"
- 1420RPM
Overall height of machine 74"
Equipped:
Manual dresser
Steady rest
220V
|
| Electrical Description |
|
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - Make - Teledyne-Landis Model - 32 TFRG |
|---|
| FOR SALE: Ad # 10511 , Year = , Make = Teledyne-Landis , Model = 32 TFRG |
|
|
Category: Gear Shapers
|
Capacity: Teledyne-Landis Model 32TFRG, Gear Roll Finish Machin
|
| Ad #
10511 |
| Year:
|
|
| Make:
| Teledyne-Landis
|
| Model:
| 32 TFRG
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- #32TFRG TELEDYNE-LANDIS GEAR ROLL FINISHING MACHINE
Serial No. 32-TFRG-82, Model 32TFRG,
EQUIPPED WITH:
Fixturing
Vickers Hydraulics
CATALOGUE SPECIFICATIONS:
Rolling Force Capacity, Maximum 42000 LBS
Capacity Helical Gears With Automatic Multiple Revolving Turret Fixture, Diameter 2.5" (64MM)
Capacity Helical Gears With Automatic Single-Station Roll Over Fixture, Diameter 5" (127MM)
Capacity Helical Gears With Semi-Automatic Single-Station Fixture With Manual Load, Diameter 5" (127MM)
Production Rate Variable 6 to 15 PPM
NOTE: This Machine Is Designed To Meet Exacting Finish
Gear Specifications And Will Roll-Finish To Overall
Gear Tolerances. Machine Can Be Easily Incorporated
Into An Automated Line To Produce Gears For Many Applications
|
|
|
| FOR SALE: Year - Make - Teledyne-Landis Model - 32 TFRG |
|---|
| FOR SALE: Ad # 10511 , Year = , Make = Teledyne-Landis , Model = 32 TFRG |
|
|
Category: Gear Shapers
|
Capacity: Teledyne-Landis Model 32TFRG, Gear Roll Finish Machin
|
| Ad #
10511 |
| Year:
|
|
| Make:
| Teledyne-Landis
|
| Model:
| 32 TFRG
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- #32TFRG TELEDYNE-LANDIS GEAR ROLL FINISHING MACHINE
Serial No. 32-TFRG-82, Model 32TFRG,
EQUIPPED WITH:
Fixturing
Vickers Hydraulics
CATALOGUE SPECIFICATIONS:
Rolling Force Capacity, Maximum 42000 LBS
Capacity Helical Gears With Automatic Multiple Revolving Turret Fixture, Diameter 2.5" (64MM)
Capacity Helical Gears With Automatic Single-Station Roll Over Fixture, Diameter 5" (127MM)
Capacity Helical Gears With Semi-Automatic Single-Station Fixture With Manual Load, Diameter 5" (127MM)
Production Rate Variable 6 to 15 PPM
NOTE: This Machine Is Designed To Meet Exacting Finish
Gear Specifications And Will Roll-Finish To Overall
Gear Tolerances. Machine Can Be Easily Incorporated
Into An Automated Line To Produce Gears For Many Applications
|
|
|
| FOR SALE: Year - Make - ITW Model - 2901-108 |
|---|
| FOR SALE: Ad # 10489 , Year = , Make = ITW , Model = 2901-108 |
|
|
Category: Gear Shapers
|
Capacity: ITW Model 2901-108, Gear Burnisher
|
| Ad #
10489 |
| Year:
|
|
| Make:
| ITW
|
| Model:
| 2901-108
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- ITW
Model 2901-108 Automatic Gear Burnishing
S/N #12277
Best Use
For burnishing external gears, spur or helical, from 20 - 75mm in size. Removes or reduces nicks and burrs while improving surface finish. Used instead of honing and finish grinding when process calls only for nick and burr removal. Designed for symmetrical gears which can be rolled on the major diameter.
Function
Gears are rolled into and rolled out of machine. Gears are captured between three burnishing tools and rolled while the work piece is oscillated parallel with the tooling. Area is flooded with coolant. Work piece bore and tooling dies bore are parallel and in the horizontal (H) plane.
Advantages
High speed, process improvement, long tool life (500,000 - 750,000 cycles).
For use with 1-3" Gears
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1972 Make - Cincinnati Model - 5FL12 |
|---|
| FOR SALE: Ad # 10455 , Year = 1972 , Make = Cincinnati , Model = 5FL12 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: Cincinnati Model 5FL12, 5/8'' x 12' Hydraulic Squaring Shear
|
| Ad #
10455 |
| Year:
| 1972
|
| Make:
| Cincinnati
|
| Model:
| 5FL12
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 53000
|
| Dimension: L x W x H | 15 x 7 x 10ft |
Machine Location:
|
| City: |
On Request
|
| State: |
Pennsylvania
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Cincinnati Hydraulic Squaring Shear 5/8" x 12'
MODEL #5FL12 S/N # NEW 1972
EQUIPPED WITH: 48" Front Operated Power Back Gauge10' Squaring Arm(2) Front SupportsAdjustable Rake AngleBall Rollers In TableHydraulic Hold-DownsAutomatic Pressure Lubrication SystemElectric Foot SwitchCATALOGUE SPECIFICATIONS: Shearing Capacity, Nominal.................. 12' x 5/8"Shearing Capacity, Maximum.................. 12' x 3/4"Length Between Housings..................... 12'3"Nominal Rake, Angle......................... 1/2"Increased Rake, Angle....................... 3/4"Throat Depth................................ 18"Total Hold-Down Pressure.................... 41 TON Ram Speed, Full LoadDown................... 135 IPM Ram Speed,Return........................... 290 IPM Strokes Per Minute @ FullLength............ 12 SPM Strokes Per Minute @ 24" Length.............33 SPM Motor, Horsepower........................... 40 HP OverallDimensions, L x W.................. 15'x7'Overall Height.............................. 10'Weight Approximately........................ 53000 LBSNOTE: Machine Appears To Be In Very Good Condition. From Precision Naval Facility.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - Make - Mulitpress Model - W4R45L |
|---|
| FOR SALE: Ad # 10493 , Year = , Make = Mulitpress , Model = W4R45L |
|
|
Category: Hydraulic C-Frame Press
|
Capacity: Multipress Model WR45L, 4 TON, BENCH MODEL
|
| Ad #
10493 |
| Year:
|
|
| Make:
| Mulitpress
|
| Model:
| W4R45L
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MULTIPRESS HYDRAULIC PRESSES
MODEL# W4R45L S/N #30482
***BENCH MODEL W/STAND***
MACHINE SPECIFICATIONS:
MAX TONS 4
MOTOR H.P. 5
RAM SPEEDS 255-530
GPM PUMP 5.82
CYLINDER
-BORE 2.5"
-RAM 1.75"
MAX PRESSURE PSI 1630
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Mulitpress Model - W4R45L |
|---|
| FOR SALE: Ad # 10493 , Year = , Make = Mulitpress , Model = W4R45L |
|
|
Category: Hydraulic C-Frame Press
|
Capacity: Multipress Model WR45L, 4 TON, BENCH MODEL
|
| Ad #
10493 |
| Year:
|
|
| Make:
| Mulitpress
|
| Model:
| W4R45L
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MULTIPRESS HYDRAULIC PRESSES
MODEL# W4R45L S/N #30482
***BENCH MODEL W/STAND***
MACHINE SPECIFICATIONS:
MAX TONS 4
MOTOR H.P. 5
RAM SPEEDS 255-530
GPM PUMP 5.82
CYLINDER
-BORE 2.5"
-RAM 1.75"
MAX PRESSURE PSI 1630
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Impco Model - 895-72 |
|---|
| FOR SALE: Ad # 10474 , Year = , Make = Impco , Model = 895-72 |
|
|
Category: Straighteners
|
Capacity: Impco Model 895-72 Shaft Straightening Machine
|
| Ad #
10474 |
| Year:
|
|
| Make:
| Impco
|
| Model:
| 895-72
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- IMPCO Straightening Machine
Model# M895-72
S/N CHRA-177-1432
|
|
|
| FOR SALE: Year - Make - Impco Model - 895-72 |
|---|
| FOR SALE: Ad # 10474 , Year = , Make = Impco , Model = 895-72 |
|
|
Category: Straighteners
|
Capacity: Impco Model 895-72 Shaft Straightening Machine
|
| Ad #
10474 |
| Year:
|
|
| Make:
| Impco
|
| Model:
| 895-72
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- IMPCO Straightening Machine
Model# M895-72
S/N CHRA-177-1432
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - Make - Ransohoff Model - 28x21x12 |
|---|
| FOR SALE: Ad # 10502 , Year = , Make = Ransohoff , Model = 28x21x12 |
|
|
Category: Cleaning Equipment
|
Capacity: Ranshoff Model Automatic Parts Washer, 28" x 21" x 12"
|
| Ad #
10502 |
| Year:
|
|
| Make:
| Ransohoff
|
| Model:
| 28x21x12
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CAE RANSOHOFF AUTOMATIC PARTS WASHER
New 1997, Serial No
***LIKE NEW CONDITION***
EQUIPPED WITH:
Pneumatic Lift Door
Ball Screw Drive Reciprocating Carriage Conveyor
(4) Banks Of Washer Nozzles On All Sides Of
Table
(22) Top, (22) Bottom, (3) Left, (3) Right
Overhead Blower Fan - Overhead Exhaust Fan
Wash Pump Timer - Drain Cycle Timer - Blow Off
Fan
Timer - Exhaust Fan Energy Conservation Timer
(8) Point Manual Lube System
STI "Mini-Safe-B" Light Curtains
CATALOGUE SPECIFICATIONS:
Work Part Capacity Width, Maximum 21"
Work Part Capacity Length, Maximum 28"
Work Part Capacity Height, Maximum 12"
Work Table Dimensions, W x L 21" x 28"
Operating Temperature, Wash Stage 140 Degrees
Operating Temperature, Blowoff Stage 130 Degrees
Cycle Time 3 Minutes
Sump Pump Motor, Horsepower 7.5 HP
Wash Pump Motor, Horsepower 15 HP
Electrical System 460/3/60
Machine Floor Print 11'5"H x 8'6"W x 1
NOTE: This Machine Is Presently Set Up To Do
Main
Shafts, Output Shafts,and Turbine Shafts, At a
rate of Three Parts Per Cycle. The Feeder Table
Can Easily Be Changed To Accommodate Any
Combination Of Parts That Will Fit On The
WorkTable. Machine Appears To Be In Mint
Condition
with A Replacement Price Of $96,240.00
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Ransohoff Model - 28x21x12 |
|---|
| FOR SALE: Ad # 10502 , Year = , Make = Ransohoff , Model = 28x21x12 |
|
|
Category: Cleaning Equipment
|
Capacity: Ranshoff Model Automatic Parts Washer, 28" x 21" x 12"
|
| Ad #
10502 |
| Year:
|
|
| Make:
| Ransohoff
|
| Model:
| 28x21x12
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CAE RANSOHOFF AUTOMATIC PARTS WASHER
New 1997, Serial No
***LIKE NEW CONDITION***
EQUIPPED WITH:
Pneumatic Lift Door
Ball Screw Drive Reciprocating Carriage Conveyor
(4) Banks Of Washer Nozzles On All Sides Of
Table
(22) Top, (22) Bottom, (3) Left, (3) Right
Overhead Blower Fan - Overhead Exhaust Fan
Wash Pump Timer - Drain Cycle Timer - Blow Off
Fan
Timer - Exhaust Fan Energy Conservation Timer
(8) Point Manual Lube System
STI "Mini-Safe-B" Light Curtains
CATALOGUE SPECIFICATIONS:
Work Part Capacity Width, Maximum 21"
Work Part Capacity Length, Maximum 28"
Work Part Capacity Height, Maximum 12"
Work Table Dimensions, W x L 21" x 28"
Operating Temperature, Wash Stage 140 Degrees
Operating Temperature, Blowoff Stage 130 Degrees
Cycle Time 3 Minutes
Sump Pump Motor, Horsepower 7.5 HP
Wash Pump Motor, Horsepower 15 HP
Electrical System 460/3/60
Machine Floor Print 11'5"H x 8'6"W x 1
NOTE: This Machine Is Presently Set Up To Do
Main
Shafts, Output Shafts,and Turbine Shafts, At a
rate of Three Parts Per Cycle. The Feeder Table
Can Easily Be Changed To Accommodate Any
Combination Of Parts That Will Fit On The
WorkTable. Machine Appears To Be In Mint
Condition
with A Replacement Price Of $96,240.00
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1997 Make - Ransohoff Model - Automatic 28x21x12 |
|---|
| FOR SALE: Ad # 10501 , Year = 1997 , Make = Ransohoff , Model = Automatic 28x21x12 |
|
|
Category: Cleaning Equipment
|
Capacity: Ranshoff Model Automatic Parts Washer, 28"x 21" x12"
|
| Ad #
10501 |
| Year:
| 1997
|
| Make:
| Ransohoff
|
| Model:
| Automatic 28x21x12
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 28" x 21" x 12" CAE RANSOHOFF AUTOMATIC PARTS
WASHER
New 1997, Serial #
***LIKE NEW CONDITION***
EQUIPPED WITH:
Pneumatic Lift Door
Ball Screw Drive Reciprocating Carriage Conveyor
(4) Banks Of Washer Nozzles On All Sides Of
Table
(22) Top, (22) Bottom, (3) Left, (3) Right
Overhead Blower Fan - Overhead Exhaust Fan
Wash Pump Timer - Drain Cycle Timer - Blow Off
Fan
Timer - Exhaust Fan Energy Conservation Timer
(8) Point Manual Lube System
STI "Mini-Safe-B" Light Curtains
CATALOGUE SPECIFICATIONS:
Work Part Capacity Width, Maximum 21"
Work Part Capacity Length, Maximum 28"
Work Part Capacity Height, Maximum 12"
Work Table Dimensions, W x L 21" x 28"
Operating Temperature, Wash Stage 140 Degrees
Operating Temperature, Blowoff Stage 130 Degrees
Cycle Time 3 Minutes
Sump Pump Motor, Horsepower 7.5 HP
Wash Pump Motor, Horsepower 15 HP
Electrical System 460/3/60
Machine Floor Print 11'5" H x 8'6" W x 14' L
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1997 Make - Ransohoff Model - Automatic 28x21x12 |
|---|
| FOR SALE: Ad # 10501 , Year = 1997 , Make = Ransohoff , Model = Automatic 28x21x12 |
|
|
Category: Cleaning Equipment
|
Capacity: Ranshoff Model Automatic Parts Washer, 28"x 21" x12"
|
| Ad #
10501 |
| Year:
| 1997
|
| Make:
| Ransohoff
|
| Model:
| Automatic 28x21x12
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 28" x 21" x 12" CAE RANSOHOFF AUTOMATIC PARTS
WASHER
New 1997, Serial #
***LIKE NEW CONDITION***
EQUIPPED WITH:
Pneumatic Lift Door
Ball Screw Drive Reciprocating Carriage Conveyor
(4) Banks Of Washer Nozzles On All Sides Of
Table
(22) Top, (22) Bottom, (3) Left, (3) Right
Overhead Blower Fan - Overhead Exhaust Fan
Wash Pump Timer - Drain Cycle Timer - Blow Off
Fan
Timer - Exhaust Fan Energy Conservation Timer
(8) Point Manual Lube System
STI "Mini-Safe-B" Light Curtains
CATALOGUE SPECIFICATIONS:
Work Part Capacity Width, Maximum 21"
Work Part Capacity Length, Maximum 28"
Work Part Capacity Height, Maximum 12"
Work Table Dimensions, W x L 21" x 28"
Operating Temperature, Wash Stage 140 Degrees
Operating Temperature, Blowoff Stage 130 Degrees
Cycle Time 3 Minutes
Sump Pump Motor, Horsepower 7.5 HP
Wash Pump Motor, Horsepower 15 HP
Electrical System 460/3/60
Machine Floor Print 11'5" H x 8'6" W x 14' L
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
