User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1991 Make - Tsugami Model - NP-32 |
---|
FOR SALE: Ad # 12017 , Year = 1991 , Make = Tsugami , Model = NP-32 |
|
Category: CNC Lathe w/sub Spindle or Live Tooling
|
Capacity: 5/16" - 1 1/4" Diameter
|
Ad #
12017 |
Year:
| 1991
|
Make:
| Tsugami
|
Model:
| NP-32
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6,600 lbs.
|
Dimension: L x W x H | 107" x 65" x 63" H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- TSUGAMI MODEL NP-32 MARK II CNC SWISS TYPE LATHE WITH FANUC
OTT-C CONTROL (1991) SPECIFICATIONS: Capacity 5/16 – 1 1/4” Maximum Length 8.3” Maximum Hole Diameter ¾” DIAMETER DRILL Maximum Thread Size ½” TAP
Slide Travel: X 1 (Front Slide) 3.35” X 2 (Rear Slide) 4.53” Z 1 (Headstock) 8.47” Z 2 (Sub Spindle) 8.47” Cross Slide (Sub Spindle) 6.02”
Main Spindle: Spindle Speeds 35-4500 RPM Index Angle 0.001 DEGREES Spindle Motor 7.5/10.0 HP
Sub Spindle: Max Chucking Diameter 1.26’ Speed Range 200-300 RPM Index Angle 15 DEGREES Spindle Motor 2 HP
Turrets: Number of Turrets 2 Tool Stations per Turret 6 Rotary Tool Speed 224-4750 RPM Rotary Tool Stations – Total 12 Turning Tool Size 5/8” SQ. Drill Holder Diameter 1 3/8” Machine Dimensions 107” X 65’ X 63” H Weight 6600 LBS. EQUIPMENT & FEATURES: Fanuc OTT-C Control FMB 12 Foot Magazine Bar Feeder
|
Electrical Description |
|
Comments: |
- Control has a "2060 alarm"
Machine is in good mechanical condition.
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - Make - LeBlond Model - |
---|
FOR SALE: Ad # 11941 , Year = , Make = LeBlond , Model = |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" Dia. swing x 42" between centers
|
Ad #
11941 |
Year:
|
|
Make:
| LeBlond
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4500
|
Dimension: L x W x H | 84" x 34" x 55" |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- LeBlond Engine Lathe
14" Dia. swing x 42" between center Servo Shift 45-1800 rpm inch threading 9" chuck 1.5" spindle thru
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1969 Make - Ikegai Model - A20 |
---|
FOR SALE: Ad # 11899 , Year = 1969 , Make = Ikegai , Model = A20 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 20" x 40" Engine lathe
|
Ad #
11899 |
Year:
| 1969
|
Make:
| Ikegai
|
Model:
| A20
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 5,700 lb.
|
Dimension: L x W x H | 105" x 48" x 53"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 12" 3 Jaw Chuck
coolant system 6" tool post swing over bed, 20" swing over cross slide 11 3/8" distance between centers, 40" hole thru spindle, 2 1/8" spindle speeds, (13) 18- 2,000 rpm tail stock taper #5 morse tail stock travel 5 7/8" feeds coarse, (24) .035" -.5" ipr normal (24) .0022" - .031" ipr fine (24) .0015" - .02" ipr
|
Electrical Description |
|
|
|
FOR SALE: Year - 1992 Make - Enco Model - 112-8100 |
---|
FOR SALE: Ad # 11863 , Year = 1992 , Make = Enco , Model = 112-8100 |
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity:
|
Ad #
11863 |
Year:
| 1992
|
Make:
| Enco
|
Model:
| 112-8100
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 600
|
Dimension: L x W x H | 48" X 26" X 48" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Enco # 112-8100 turret lathe
6-POSITION TURRET COOLANT COLLET CLOSER 1850 rpm spindle. 6 position turret. 27 collets.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1994 Make - Enco Model - 111-1658 |
---|
FOR SALE: Ad # 11864 , Year = 1994 , Make = Enco , Model = 111-1658 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross x 60" centers
|
Ad #
11864 |
Year:
| 1994
|
Make:
| Enco
|
Model:
| 111-1658
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: |
|
Weight: | 5,500 lb.
|
Dimension: L x W x H | 112" x 42" x 69 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Enco Model 111-1658 Gap Bed Engine Lathe
15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross Slide, 22" Swing in Gap, 12-1/2" Length of Gap, 60" Maximum Between Centers, 2-1/2" Hole Thru Spindle, 15-Spindle Speeds: 22 to 1,800 RPM, Inch/Metric Threading, Tailstock, Steady Rest, Follow Rest, Chip Pan, Coolant Tank and Pump, 7-1/2 HP, Three Phase Motor and Approx: 112" x 42" x 69" and 5,500 Lbs Removeable gap bed. 15 3/4" x 58". 21" over gap. 8 3/4 over cross slide. 2 1/4" spindle thru. 15 speeds, 22- 1800 rpm. 7 1/2 hp. 9 1/2" 3 jaw chuck. steady rest and follower rest.
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Turnmaster Model - 17"-5 |
---|
FOR SALE: Ad # 11858 , Year = , Make = Turnmaster , Model = 17"-5 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 17" swing x 40" between centers
|
Ad #
11858 |
Year:
|
|
Make:
| Turnmaster
|
Model:
| 17"-5
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can skid machine
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Used turnmaster 17" lathe
swing over bed:17" swing over cross slide: center distance: 40" Gap bed with 2 1/8" spindle bore thru Has taper attachment new acu-rite turnmate readout.
|
Electrical Description |
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1988 Make - Enshu Model - VMC 530 |
---|
FOR SALE: Ad # 11913 , Year = 1988 , Make = Enshu , Model = VMC 530 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travel X 40" x Y 21" x Z 23"
|
Ad #
11913 |
Year:
| 1988
|
Make:
| Enshu
|
Model:
| VMC 530
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 22,000 lbs.
|
Dimension: L x W x H | 102" x 100" x 108"H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Fanuc 11M CNC Controller
Tape drive or DNC download with RS232 port Table, 51" x 21.5" Travels X 40" x Y 21" x Z 23" 30 position tool changer, 2 pots missing 4000 rpm, 20 hp spindle with Cat-50 taper Table load, 2,750 lbs.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1992 Make - Haas Model - VF-2 |
---|
FOR SALE: Ad # 11901 , Year = 1992 , Make = Haas , Model = VF-2 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: X 30" x Y 16" x Z 20" Travel
|
Ad #
11901 |
Year:
| 1992
|
Make:
| Haas
|
Model:
| VF-2
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 7100 lb.
|
Dimension: L x W x H | 110" x 93" x 105"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- X travel, 30"
Y travel, 16" Z travel, 20" Table Dimensions, 14" x 30" Spindle, 10 hp. CAT-40 taper 12 position tool changer no vise included haas controller
|
Electrical Description |
|
|
|
FOR SALE: Year - 2005 Make - Haas Model - TM-1 |
---|
FOR SALE: Ad # 11893 , Year = 2005 , Make = Haas , Model = TM-1 |
|
Category: CNC Vertical Milling Machines w\o ATC
|
Capacity: Travel X 30" Y 12" Z 16"
|
Ad #
11893 |
Year:
| 2005
|
Make:
| Haas
|
Model:
| TM-1
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | New, in crate
|
Shipping Info: | We can load
|
Weight: | 3300 lb.
|
Dimension: L x W x H | 84.5 x 64.0 x 109.0 max. |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- XYZ travels 30" x 12" x 16"
7.5 hp vector drive 4000 rpm spindle CT-40 taper 1 or 3 phase power Table, 47.75" x 10.5", 1000 lb. max weight Rapid and max. feed, 200 ipm manual tool change. New coolant pump and tank. Still in box! 3.5 disk drive, new in box. Rigid tapping Full table chip guard. Manual Conversational programming 15" color monitor
|
Electrical Description |
- 208-240 VAC 3-phase or 240 VAC 1-phase,
|
Comments: |
- This machine was purchased in 2005 and never hooked up. It is in the condition as delivered from Haas.
|
|
|
FOR SALE: Year - 1996 ? Make - Milltronics Model - Partner 1 |
---|
FOR SALE: Ad # 11861 , Year = 1996 ? , Make = Milltronics , Model = Partner 1 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travel, X 25" x Y 16" x Z 20"
|
Ad #
11861 |
Year:
| 1996 ?
|
Make:
| Milltronics
|
Model:
| Partner 1
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: | 5000 lb.
|
Dimension: L x W x H | 85"/ 75"/ 90"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Milltronics Partner 1
Centurian V CNC controller 12" x 40" table Travel, X 25" x Y 16" x Z 20" Cat 40 taper and 12 position tool changer 5000 rpm, 15 hp spindle.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
FOR SALE: Year - 1985 Make - Kearns-Richards Model - SJ-100 |
---|
FOR SALE: Ad # 12018 , Year = 1985 , Make = Kearns-Richards , Model = SJ-100 |
|
Category: Horizontal Boring Mills
|
Capacity: Travel: 82.5" x 70.5" x 59"
|
Ad #
12018 |
Year:
| 1985
|
Make:
| Kearns-Richards
|
Model:
| SJ-100
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Requires rigger
|
Weight: | 36,000 Lbs.
|
Dimension: L x W x H | 204" x 236" x 145" H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Kearns-Richards Boring Mill
Model SJ-100 Spindle diameter, 4" Taper, ISO-50 Head facing diameter, 26.5" Head facing capacity, 40.5 Facing slide traverse, 7" Traverse spindle speeds, 22-1120 rev/min. Facing head, 4.5-224 rev./min. Axis traverse speeds, .052-150 in./min. Main drive motor, 20 hp. Vertical travel, 59" Axis travels, 70.5" x 82.5" Table size, 59" x 59" Angle head attachment and face boring attachments powered rotary table has 4 pin locations at 90 deg Table load capacity, 5 tons Machine weight, 18 tons
Heidenhain TNC 131 controller, Needs repair or replaced approx: 5K for new controller unit, but machine can be run manually with control DRO.
|
Electrical Description |
|
Comments: |
- Controller damaged by lightning and is said to be repairable.
Machine can be run in manual operation with control DRO. Customer will provide quote for rigging.
|
|
|
FOR SALE: Year - 1961 Make - Van Norman Model - IP3-22 |
---|
FOR SALE: Ad # 12024 , Year = 1961 , Make = Van Norman , Model = IP3-22 |
|
Category: Universal Mills (Horizontal / Vertical)
|
Capacity: Travel, 28" x 10"
|
Ad #
12024 |
Year:
| 1961
|
Make:
| Van Norman
|
Model:
| IP3-22
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2750 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Van Norman Model IP3-22
42" X 10" Table 28" x 10" travel 55-2000 rpm
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Cincinnati Model - No 4 |
---|
FOR SALE: Ad # 12020 , Year = , Make = Cincinnati , Model = No 4 |
|
Category: Horizontal Mills
|
Capacity: Travels, 42" x 14" x 20" vertical
|
Ad #
12020 |
Year:
|
|
Make:
| Cincinnati
|
Model:
| No 4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 9,900 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Cincinnati No 4 Horizontal Milling Machine
80" x 18" Table Travels, 42" x 14" x 20" vertical Speeds, (32) 16-1600 rpm Spindle taper, #50 30 hp. Coolant 220V 3 Phase
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Gorton Model - 9-J |
---|
FOR SALE: Ad # 12021 , Year = , Make = Gorton , Model = 9-J |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Travel 12" x 24" x 17.5" verticle
|
Ad #
12021 |
Year:
|
|
Make:
| Gorton
|
Model:
| 9-J
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2,900 lbs
|
Dimension: L x W x H | 5' x 6' x 7' H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Gorton 9-J Milling Machine
With Duplicating attachment 35" x 10.5" table Travel, 12" x 24" Belt Drive spindle, 2 hp. B & S #10 taper
|
Electrical Description |
|
|
|
FOR SALE: Year - 1987 Make - Supermax Model - YCM 16VS |
---|
FOR SALE: Ad # 11940 , Year = 1987 , Make = Supermax , Model = YCM 16VS |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Table, 9" x 42"
|
Ad #
11940 |
Year:
| 1987
|
Make:
| Supermax
|
Model:
| YCM 16VS
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Supermax Knee Mill
Model #YCM 16VS Mfg date 1987 3 HP motor Spindle speed, 60- 4200 rpm Anilam Wizard digital readout
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1988 Make - Seiki-XL/Gromax Model - 9" x 42" |
---|
FOR SALE: Ad # 11942 , Year = 1988 , Make = Seiki-XL/Gromax , Model = 9" x 42" |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Tablel 9" x 42"
|
Ad #
11942 |
Year:
| 1988
|
Make:
| Seiki-XL/Gromax
|
Model:
| 9" x 42"
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3400
|
Dimension: L x W x H | 4 x 5 x7 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Seiki- XL Knee mill with Gromax head
9" x 42" table X & Y power table feeds Mitutoyo digital readout Power draw bar
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1980 Make - Bridgeport Model - Series 1 |
---|
FOR SALE: Ad # 11921 , Year = 1980 , Make = Bridgeport , Model = Series 1 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Travel X 30" x Y 12"
|
Ad #
11921 |
Year:
| 1980
|
Make:
| Bridgeport
|
Model:
| Series 1
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2,200 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 1980 bridgeport series 1
Travel X 30" x Y 12" Table, 9" x 42" Knee travel, 16" Quill travel, 5" Spindle speed, 60 to 4200 rpm Spindle taper, R-8
Alliant readout, X axis not working Table end missing, Owner removed power feed.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1942 Make - Lucas Model - No. 42 |
---|
FOR SALE: Ad # 11900 , Year = 1942 , Make = Lucas , Model = No. 42 |
|
Category: Horizontal Boring Mills
|
Capacity: 48" x 40" x spindle traverse 60"
|
Ad #
11900 |
Year:
| 1942
|
Make:
| Lucas
|
Model:
| No. 42
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 20,000 lb.
|
Dimension: L x W x H | 7' x 16' x 10' H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Table size, 40" x 60"
X axis travel 48" Y axis travel 40" Spindle dia., 4" Spindle traverse, 60" 26 speeds, 9-1200 rpm 18 Feeds, .002" - .625" Rapid traverse speed, 97 ipm Motor 15 hp. Spindle taper, #6 Morse Acu-rite readout
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Van Norman Model - Model 16L |
---|
FOR SALE: Ad # 11865 , Year = ? , Make = Van Norman , Model = Model 16L |
|
Category: Universal Mills (Horizontal / Vertical)
|
Capacity: Travel, X 22" x Y 10", Knee 22",
|
Ad #
11865 |
Year:
| ?
|
Make:
| Van Norman
|
Model:
| Model 16L
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: |
|
Weight: | 2750 lb.
|
Dimension: L x W x H | 67W x 78"D x 74-1/4"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- VAN NORMAN SWIVELING HEAD MILLING MACHINE: 16L
SPECIFICATIONS: TABLE SIZE......................... 10" x 40-1/2" TRAVELS: LONGITUDINAL.............. 22" CROSS..................... 10" KNEE VERTICAL............. 24" RAM....................... 20-1/2" SPINDLE SPEEDS (18)................ 50 - 2000 RPM SPINDLE TAPER...................... VAN NORMAN TAPER FEED RATES (9)..................... .6 - 16 IPM APPROXIMATE DIMENSIONS ............ 67W x 78"D x 74-1/4"H EQUIPPED WITH: - UNIVERSAL MILLING HEAD - LUBRICATION SYSTEM - 2 HP 220/440 VOLT MOTOR 2 hp step pulley drive. 40" x 10" table. Travel, X 22" x Y 10", Knee 22", Ram 20 1/2. 40 NST taper collet spindle. 80 - 2620 rpm.
|
Electrical Description |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Oster Pipe Threader Model - Y6-128 |
---|
FOR SALE: Ad # 12023 , Year = , Make = Oster Pipe Threader , Model = Y6-128 |
|
Category: Tapping / Threading Equip.
|
Capacity: 1 3/4" - 4" diameter
|
Ad #
12023 |
Year:
|
|
Make:
| Oster Pipe Threader
|
Model:
| Y6-128
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Oster Pipe Threader
Model Y6-128 1 3/4" - 4" Diameter Speeds, 6-10-17-30
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Allen Model - |
---|
FOR SALE: Ad # 12022 , Year = , Make = Allen , Model = |
|
Category: Multi Spindle Drill Press
|
Capacity: 4 Spindle drill press
|
Ad #
12022 |
Year:
|
|
Make:
| Allen
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Allen 4 spindle drill press
5' x 2' table 150-1800 rpm 6" quills #2 morse taper
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - Make - Cincinnati Model - #2-OM |
---|
FOR SALE: Ad # 11938 , Year = , Make = Cincinnati , Model = #2-OM |
|
Category: Centerless Grinders
|
Capacity: 4 3/4" dia.
|
Ad #
11938 |
Year:
|
|
Make:
| Cincinnati
|
Model:
| #2-OM
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 7500
|
Dimension: L x W x H | 100" x 65" x 68"H |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Cincinnati Centerless Grinder
Model # 2-OM Serial #2M2H-5A-77 20" x 6" wide grinding wheel 8" wide regulating wheel
2004 hours on machine
|
Electrical Description |
|
|
|
FOR SALE: Year - 1998 Make - SMTW Model - MBA 1332H |
---|
FOR SALE: Ad # 11916 , Year = 1998 , Make = SMTW , Model = MBA 1332H |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 14.5" OD x 59" Between centers
|
Ad #
11916 |
Year:
| 1998
|
Make:
| SMTW
|
Model:
| MBA 1332H
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 9,460 lb.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- SMTW MBA 1332H Cylindrical grinder
14.5" OD x 59" Between centers Traverse speed, 2" to 160" IPM Wheel, 3" wide x 24" dia. with 12" hole Wheel speed, 1,130 rpm Auto plunge and infeed Min. autoinfeed increment feed, .0002" Workhead spindle speed, 32 to 312 rpm 15 hp. grinding spindle Sony readout paid 60K new in 1998
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Cincinnati Model - 4U2B |
---|
FOR SALE: Ad # 11859 , Year = ? , Make = Cincinnati , Model = 4U2B |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 10" OD, 24" length
|
Ad #
11859 |
Year:
| ?
|
Make:
| Cincinnati
|
Model:
| 4U2B
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 10" OD capacity
24" max length 12" dia. OD grinding wheel. Has steady rests 4 jaw chuck. lots of tooling & manuals, very little use on machine
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Seybold Model - CHE |
---|
FOR SALE: Ad # 11958 , Year = , Make = Seybold , Model = CHE |
|
Category: Paper Shear
|
Capacity: 34"W x 36"
|
Ad #
11958 |
Year:
|
|
Make:
| Seybold
|
Model:
| CHE
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Seybold Paper Cutter
Model CHE 34" Knife #CHB-157 Cutting stick #CHE-375
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Wysong Model - |
---|
FOR SALE: Ad # 11885 , Year = ? , Make = Wysong , Model = |
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 10' x 10 gauge
|
Ad #
11885 |
Year:
| ?
|
Make:
| Wysong
|
Model:
|
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 70s? Make - Chicago Model - 810-L |
---|
FOR SALE: Ad # 11886 , Year = 70s? , Make = Chicago , Model = 810-L |
|
Category: Press Brakes (Mechanical)
|
Capacity: 60 ton x 10'
|
Ad #
11886 |
Year:
| 70s?
|
Make:
| Chicago
|
Model:
| 810-L
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 13000 ?
|
Dimension: L x W x H | 12' x 5 x |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- chicago press brake
10' x 60 ton no tooling or dies included 24" back Guage Manuel 8 Ft between Housing 10" Stroke in good running condition -ready to go
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1990 Make - Strippit Model - SPM 500 |
---|
FOR SALE: Ad # 11923 , Year = 1990 , Make = Strippit , Model = SPM 500 |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity: Axis Travel 39.84" x 20.94": 20 ton
|
Ad #
11923 |
Year:
| 1990
|
Make:
| Strippit
|
Model:
| SPM 500
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 9,500 lb.
|
Dimension: L x W x H | 88" x 67" x 75"H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Strippit spm 500
Axis Travel 39.84" x 20.94" Max. Material Thickness, .250" Hole Capacity, 3.5" Dia. in 14 Ga. 1.125" Dia. in .250" Tonnage, 20 (metric) Max workpiece size, 78.75" x 39.37 with repositioning & rotation Turret configuration, Strippit Style, 8- 1.25" 2- 3.5" Max. axis speed, 787 IPM Turret bushing in good shape Lots of tooling, (pictured) no RS232-cassett only All Manuals
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1970 Make - Package Machinery Model - Type # UE-6 |
---|
FOR SALE: Ad # 11969 , Year = 1970 , Make = Package Machinery , Model = Type # UE-6 |
|
Category: Packaging Equipment
|
Capacity: 14" x 12" Shrink Wrap Machine
|
Ad #
11969 |
Year:
| 1970
|
Make:
| Package Machinery
|
Model:
| Type # UE-6
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 96" x 48" x 65"H |
Machine Location:
|
City: |
On Request
|
State: |
Virginia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Shrink Wrap Machine
Mfg. by Package Machinery Type, UE-6 14" x 12" package size
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|