User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15469 | CNC Lathe w/sub Spindle or Live Tooling |
1998 |
Mori Seiki |
SL -150 |
Excellent |
sold |
Photo /
More Info. |
Swing Over Bed 26.7" Between Centers 22": CNC Turning Center Lathe with Auto Bar Feeder
Make: Mori Seiki
Model: SL-150
Electrical: 220/3 phase
Swing Over Bed 26.7"
Swing Over Cross Slide 17.9"
Max. Turning Length 13.7"
Between Centers 22"
Spindle Bore Dia. 2.2"
Max. Bar Work 1.75"
Spindle Nose A2-5
Spindle Speeds 50-5000 RPM
Spindle Orientation .001 Degree
Number Of Turret Position 12
Number Of Rotary Positions 12
Rotary Spindle Speeds 3000 RPM
X - Axis Travel 9.1"
Z - Axis Travel 20.5"
C - Axis Travel 360,000 Degree
Tailstock Travel 20.3"
Rapid Traverse 708/944 IPM
Main Motor/Rotary 15 HP/3.5HP
Machine Weight 8,580 LBS.
EQUIPPED WITH:
MORI SEIKI MSC 500 CNC CONTROL
Auto Bar feeder included & Chip Conveyor
Comes with manuals |
|
We found 15 matching ads. Now displaying the remaining 15 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15373 | General Purpose Lathe 15in. to 23in. swing |
1989 |
Summit |
19-4x60 |
Good |
sold |
Photo /
More Info. |
19" swing x 60" between centers w/duplicator acc: Summit Lathe
Model: 19-4x60
Capacity: 19" swing x 60" between centers
Electrical: 220/3 phase
Spindle Bore: 4"
front and rear mounted chucks
Includes Lathe Duplicator acc. |
|
Ad # 15373 | General Purpose Lathe 15in. to 23in. swing |
1989 |
Summit |
19-4x60 |
Good |
sold |
Photo /
More Info. |
19" swing x 60" between centers w/duplicator acc: Summit Lathe
Model: 19-4x60
Capacity: 19" swing x 60" between centers
Electrical: 220/3 phase
Spindle Bore: 4"
front and rear mounted chucks
Includes Lathe Duplicator acc. |
|
Ad # 15372 | General Purpose Lathe 15in. to 23in. swing |
1989 |
Nardini |
1560 E |
Good |
sold |
Photo /
More Info. |
15" swing x 60" between centers: Nardini Lathe
Capacity: 15" swing x 60" between centers
Model: 1560 E
Electrical: 230/3 phase
3 jaw chuck
2" spindle bore |
|
Ad # 13703 | Tool Room Lathe 8in. to 14in. swing |
? |
Lux Cut |
1340 |
Needs Work |
sold |
Photo /
More Info. |
13" Swing x 40": Lux Cut Lathe
Model: 1340
Capacity: 13" swing x 40"
3 Jaw Chuck
Voltage: 220 3 phase |
|
Ad # 14255 | Tool Room Lathe 8in. to 14in. swing |
1960 |
Sheldon |
UM 70B |
Fair |
sold |
Photo /
More Info. |
13" Swing x 48" between centers: Sheldon Manual Lathe
Model: UM 70B
Capacity: 13" swing x 48" between centers
Electrical: 460/ 3 Phase
Spindle Bore: 1 3/8"
Quick Change tool holder
Steady rest
This machine is equipped with the "two-lever"
instantly-selectable spindle speed drive
system.
|
|
Ad # 15508 | Heavy Duty Large Lathe 24in. & over swing |
1942 |
Niles Tool Works |
A 12-3 |
Good |
sold |
Photo /
More Info. |
56" swing over bed x 276" between centers: Niles Tool Works Engine Lathe
Capacity: 54" Swing x 276" between centers
Specifications:
Swing Over Bed: 54"
swing over cross slide:44"
Distance Between Centers:276"
Spindle Speeds: (12) 3.94
- 232 RPM
Motor (Est.):50 HP
Equipped With:
36" 4-Jaw Chuck
(3) Steady Rests
Tool Post
10" Riser Block
Pendant Control
Can be seen under power. |
|
Ad # 15507 | General Purpose Lathe 15in. to 23in. swing |
1970 |
Monarch |
612 |
Good |
sold |
Photo /
More Info. |
16" swing x 54" between centers: Monarch Manual Engine Lathe
Capacity: 16" swing x 54" between centers
Electrical: 220 3 phase
4 Jaw Chuck
Steady Rest
Swing Over Bed Ways.16"
Swing Over Cross Slide.10"
Center Distance.54"
Spindle Hole.2"
Spindle Speeds.12 To 1,500 Rpm's
Spindle Nose.D-1-8
Feeds..0013 To .0821
Threads Inch.2 To 120 TPI
Threads Metric.No
Tail Stock Quill Diameter.4"
Tail Stock Quill Travel.6"
Tail Stock Taper.# 4 Morse
Steady Rest.4"
Main Motor.10 Hp 220 / 440 |
|
Ad # 14033 | General Purpose Lathe 15in. to 23in. swing |
1940 |
Monarch |
14" C |
Good |
sold |
Photo /
More Info. |
Swing: 16.5" x 30" between centers: Monarch Manual Lathe
Model: 14" C
Capacity: 16.5 Swing, 30" between centers
Electrical: 220/3 phase
1 3/4" thru head stock
16 Spindle speeds from 24-1000 rpm
Geared for chasing threads w/thread chasing dial
60 feed and threading speeds
5 HP
3 Jaw Chuck/4 Jaw chuck/collet head with 3/16,
1/4,5/16,3/8,7/16,1/2,9/16,5/8, and 1" collets
4 position Turret Tool Post
Aloris Type quick change tool post
Carbide insert tool holders for turning, (right,
left and straight) knurling tool, cut off tool,
boring bar holder
live ball bearing center
#6 MT - # MT adapter
3/4" drill chuck w/#6 MT for tail stock
|
|
Ad # 13957 | Tool Room Lathe 8in. to 14in. swing |
? |
Clausing |
1500 |
Good |
sold |
Photo /
More Info. |
14" Swing x 48" between centers: Clausing Lathe
Model: 1500
Capacity: 14 Swing x 48" between centers
Electrical: 220/3 phase, single phase converter included
3 and 4 Jaw chuck,collets, live center, metric gears, 5
h.p.-3Ψ motor with 1Ψ converter,extra oil
Note: slight leakage of some seals
SWING OVER CARRIAGE 8-1/4"
BED WIDTH 11"
SPINDLE BORE 1-9/16"
SPINDLE NOSE D1-4 CAMLOCK
SPINDLE SPEEDS INFINITELY VARIABLE:
LOW GEAR DRIVE 45 - 255 RPM
INTERMEDIATE GEAR DRIVE 180 - 1000 RPM HIGH
DIRECT DRIVE 360 - 2000 RPM
ENGLISH THREAD RANGE (54) 4 - 224 TPI
LONGITUDINAL FEED RANGE (54) .00065" - .0374" PER
REV
CROSS FEED RANGE (54) .00033" - .0187" PER REV
TAILSTOCK TRAVEL 5"
TAILSTOCK SPINDLE TAPER #4 MT |
|
Ad # 13927 | Ram Type & Saddle Type Turret Lathes |
1960's ? |
Warner & Swasey |
No.3 |
Good |
sold |
Photo /
More Info. |
15" Swing over bed: Warner & Swasey Turret Lathe
Model: No. 3
Swing over ways:15
Swing over cross slide:7
Cross slide travel:8
Carriage travel:17
Carriage feeds:.0025-.026 TPR
Max distance turret face to spindle nose:26
(approx.)
Turret feeds:.003-.030 TPR
Max turret stroke:10
Spindle speeds (12):67-1480 RPM
Spindle hole:1-3/4
Spindle nose:A-6
Bar feed capacity:1-1/2
Motor:7.5 HP, 220 volt, 3 phase
Includes 3 Jaw Chuck, Collet Closer with collet
pad set, 4 way Tool Post |
|
Ad # 13925 | Heavy Duty Large Lathe 24in. & over swing |
1950's ? |
Lodge and Shipley |
? |
Fair |
sold |
Photo /
More Info. |
36" Swing, 20 feet between centers: Lodge & Shipley Lathe
Capacity: 20ft. between centers, 36" Swing
Electrical: 110/Single Phase
HP: 2 |
|
Ad # 13816 | General Purpose Lathe 15in. to 23in. swing |
1980's |
Clausing |
Colchester 17" |
Good |
sold |
Photo /
More Info. |
17" x 60": Clausing Lathe Model: Colchester 17"
Capacity: 17" x 60"
Electrical: 230 / 3 phase
chuck: 10"-3 jaw
no taper attach
no gap bed
Sony DRO
Manual Included
SWING OVER BED ..............17-
1/4"
SWING OVER CROSS SLIDE ......10-
1/2"
DISTANCE BETWEEN CENTERS ....60"
SPINDLE NOSE CAMLOCK ........D1-8"
HOLE THRU SPINDLE ...........3-
1/16"
SPINDLE SPEED RANGE (16) ....20 -
1,600
RPM
ENGLISH THREADING RANGE (38) 2 - 72
TPI
METRIC THREADING RANGE (40) .4 - 14
MM
LONGITUDINAL FEED RANGE (45) 002" -
.032" IPR
CROSS FEED RANGE (45) .......001" -
.016" IPR
TAILSTOCK SPINDLE TAPER .....#5 MT
TAILSTOCK SPINDLE TRAVEL .... 7"
rigging/loading fee : $500.00 |
|
Ad # 13816 | General Purpose Lathe 15in. to 23in. swing |
1980's |
Clausing |
Colchester 17" |
Good |
sold |
Photo /
More Info. |
17" x 60": Clausing Lathe Model: Colchester 17"
Capacity: 17" x 60"
Electrical: 230 / 3 phase
chuck: 10"-3 jaw
no taper attach
no gap bed
Sony DRO
Manual Included
SWING OVER BED ..............17-
1/4"
SWING OVER CROSS SLIDE ......10-
1/2"
DISTANCE BETWEEN CENTERS ....60"
SPINDLE NOSE CAMLOCK ........D1-8"
HOLE THRU SPINDLE ...........3-
1/16"
SPINDLE SPEED RANGE (16) ....20 -
1,600
RPM
ENGLISH THREADING RANGE (38) 2 - 72
TPI
METRIC THREADING RANGE (40) .4 - 14
MM
LONGITUDINAL FEED RANGE (45) 002" -
.032" IPR
CROSS FEED RANGE (45) .......001" -
.016" IPR
TAILSTOCK SPINDLE TAPER .....#5 MT
TAILSTOCK SPINDLE TRAVEL .... 7"
rigging/loading fee : $500.00 |
|
Ad # 13803 | Ram Type & Saddle Type Turret Lathes |
1960's |
Warner & Swasey |
M-2250 # 5 |
Good |
sold |
Photo /
More Info. |
20" Turret with tooling: Warner & Swasey Turret Lathe
Model: M-2250 # 5 Lot 34
Electrical: 460/3 phase
Tooling and cabinet included
Swing Over Ways: 20"
Swing Over Carriage: 10-1/4"
Swing in Gap: 31-1/2"
Gap Bed Will Slide Back: Approx. 20"
Max. Distance Chuck to Turret, Bed Closed: Approx. 28"
Max. Distance Chuck to Turret, Bed Open: Approx. 47"
Spindle Speeds: 25 to 1556 RPM
Spindle Hole: 2-7/8"
Spindle Nose: A1-8
(6) Carriage Feeds: .004 to .045 TPR
(6) Cross Slide Feeds: .003 to .027 TPR
(6) Turret Feeds: .005 to .048 TPR
Turret Stroke: 12"
20/10 HP Motor
|
|
Ad # 15399 | Vertical Turret Lathe (VTL) |
1950's |
Bullard |
42" |
Good |
sold |
Photo /
More Info. |
42" 3 jaw chuck: Vertical Turret Lathe
Make: Bullard (Spiral Drive)
Model: 42"
Electrical: 220/3 phase
Table Size: 42"
Max Swing: 44"
Height Under Cross Rail: 33"
Height Under Turret Face: 43-1/2"
Table Speeds: (12) 4.1 to 70 RPM
Vertical Head Movement: 27"
Vertical Head Will Face: 44"
Vertical Movement Of Side Head: 25"
Horizontal Movement Of Side Head: 21"
30 HP Drive Motor
42" 3-Jaw Chuck
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14349 | CNC Vertical Milling Machines w\o ATC |
2008 |
Acra |
AM4ACNC |
Good |
sold |
Photo /
More Info. |
Table Size: 54" x 10": 3 axis cnc: CNC Vertical Milling Machine
Make: ACRA
Model: AM4ACNC
3 axis cnc control
vari-speed EVS head type
control: acu-rite millpower 3 axis
Capacity: Table - 54" x 10"
Electrical: 460/3 phase wired now
"X" Axis Travel:34"
"Y" Axis Travel:15"
"Z" Axis Travel:20"
Quill Travel:5"
Spindle Speed:50-5,000 RPM
Spindle Taper:#40
Spindle Motor:5 HP
riser block:12" ?
|
|
Ad # 14307 | Vertical Machining Centers (VMC) |
1999 |
Haas |
VF-1 |
Excellent |
sold |
Photo /
More Info. |
Table: 26" x 14": Haas Vertical Machining Center (high
torque,30HP
Model: VF-1
Capacity: Table 26" x 14"
Travels:
X-Axis 20
Y-Axis 16
Z-Axis 20
30HP High Torque power machine and 2 speed
Gear
Box
New "windows" purchased directly from Haas
and
installed last year ($1,140.00)
Upgrades for this machine:
30 HP spindle
10,000 RPM spindle
Programmable Coolant
Chip Auger
4th Axis Prewire
Haas QuickCode
Rigid Tap
Brushless Servos
USB (converted from floppy drive)
|
|
Ad # 14290 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1973 |
Milltronics |
Partner |
Good |
sold |
Photo /
More Info. |
50" x 10" Table: Milltronics CNC Milling Machine
Model: Partner
Capacity: 50" x 10' Table
Electrical: 230/ 3 phase
Specifications:
Spindle Taper R-8
Table travels: X axis 30 " Y axis 15" Z axis
5.5"
Vertical knee travel 16"
Spindel Speed range, Low 60-500 rpm High 500-
4200
In photo, computer monitor in use because CNC
monitor no longer works. |
|
Ad # 14174 | Vertical Machining Centers (VMC) |
1996 |
Haas |
VF-O |
Good |
sold |
Photo /
More Info. |
Table Size: 26" x 14": Haas Vertical Machining Center
Model: VF-O
Capacity: Table Size 26" x 14"
Year: 1996
MAXIMUM TABLE LOAD 3,000 LBS
SPINDLE NOSE TO TABLE TOP4" - 29"
X AXIS TRAVEL-20"
Y AXIS TRAVEL-16"
Z AXIS TRAVEL-20"
RAPID TRAVERSE RATE X, Y & Z AXES 710 IPM
CUTTING FEED RATE0.1 - 500 IPM
SPINDLE TAPER BT 40
SPINDLE SPEEDS 0 - 7,500 RPM
SPINDLE MOTOR 15 HP
TOOL CHANGER CAPACITY 20 STATION ATC
Includes several tool holder appox:10Pcs
Note: rigging fee approx: $800.00 |
|
Ad # 15470 | Vertical Machining Centers (VMC) |
2006 |
Haas |
SMINIMILL |
Excellent |
SOLD |
Photo /
More Info. |
X axis 16" Y axis 12" Z axis 10": CNC Vertical Machining Center
Make: Haas
Model: SMINIMILL
Capacity: X axis 16" Y axis 12" Z axis
10"
Spindle Nose to Table (~ max)14 "356 mm
Spindle Nose to Table (~ min)4 "102 mm
Table:
Length36 "914 mm
Length (Work Area)28.75 "730 mm
Width12 "305 mm
T-Slot Width5/8 "16 mm
T-Slot Center Distance4.33 "110.0 mm
Number of Std T-Slots33
Max Weight on Table (evenly distributed)
500 lb227 kg
Max Rating15 hp11.2 kW
Max Speed10,000 rpm10 000 rpm
Max Torque17 ft-lb @ 4600 rpm23 Nm @
4600 rpm
Max Rating15 hp11.2 kW
Max Speed10,000 rpm10 000 rpm
Max Torque17 ft-lb @ 4600 rpm23 Nm @
4600 rpm
Max Rating 15 hp
Max Speed 10,000 rpm
Max Torque 17 ft-lb @ 4600 rpm
Drive SystemDirect Speed Belt Drive
TaperCT or BT 40
Rapids on X1200 in/mi
Rapids on Y1200 in/min
Rapids on Z1200 in/min
Max Cutting833 in/min
Tool Changer:
TypeCarousel
Capacity 10
Air Required4 scfm, 100 psi
Coolant Capacity40 gal
Machine Run Time:6365 hours as of 3/9/2017
|
|
Ad # 15422 | CNC & Retrofit Knee / Bed Mills w/o ATC |
200? |
CWT |
Pro 1058-M |
Good |
sold |
Photo /
More Info. |
Table 58" x 10": CNC 3 Axes Retrofit Knee Mill
Make: CWT
Model: PRO 1058-M
Capacity: 58" x 10"
Electrical: 220/3 phase
Acu-Rite Control and Readout
CWTs Pro-1058 machining center is a multi-
purpose machine that can do guide and seat
work
as well as resurfacing, line boring and
cylinder boring.
|
|
We found 32 matching ads. Now displaying the remaining 32 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15394 | Vertical Boring Mills |
1989 |
Central Machinery |
30864 |
Good |
sold |
Photo /
More Info. |
Table Size: 29" x 8": 1-1/2 HP Milling/Drilling Machine
Make: Central Machinery
Model: 30864
Capacity: Table Size: 29" x 8"
This universal, 1-1/2 HP milling/drilling
machine is constructed from cast iron and
steel
to ensure maximum milling and drilling
precision.
Milling and drilling machine is easy to
operate, with the downfeed including both
rapid
and fine controls.
|
|
Ad # 15393 | Horizontal Mills |
1950's |
Elgin |
HM-5C |
Good |
sold |
Photo /
More Info. |
Table: 18" x 4": Horizontal Mill (mini)
Make: Elgin
Model: HM-5C
Capacity: table - 18" x 4"
Electrical: 220/3 phase
This is a very handy small sized horzontal
mill. perfect for the hobby user at home with
limited space or a small shop that does not
need a large mill.
|
|
Ad # 15394 | Vertical Boring Mills |
1989 |
Central Machinery |
30864 |
Good |
sold |
Photo /
More Info. |
Table Size: 29" x 8": 1-1/2 HP Milling/Drilling Machine
Make: Central Machinery
Model: 30864
Capacity: Table Size: 29" x 8"
This universal, 1-1/2 HP milling/drilling
machine is constructed from cast iron and
steel
to ensure maximum milling and drilling
precision.
Milling and drilling machine is easy to
operate, with the downfeed including both
rapid
and fine controls.
|
|
Ad # 15392 | Vertical Boring Mills |
1950's |
Kearney & Trecker |
10HP-3CH |
Good |
sold |
Photo /
More Info. |
Table size: 64" x 13": Vertical Boring Mill
Make: Kearney & Trecker
Model: 10HP-3CH
Capacity: Table - 64" x 13"
Electrical: 220/3 phase
|
|
Ad # 15393 | Horizontal Mills |
1950's |
Elgin |
HM-5C |
Good |
sold |
Photo /
More Info. |
Table: 18" x 4": Horizontal Mill (mini)
Make: Elgin
Model: HM-5C
Capacity: table - 18" x 4"
Electrical: 220/3 phase
This is a very handy small sized horzontal
mill. perfect for the hobby user at home with
limited space or a small shop that does not
need a large mill.
|
|
Ad # 15392 | Vertical Boring Mills |
1950's |
Kearney & Trecker |
10HP-3CH |
Good |
sold |
Photo /
More Info. |
Table size: 64" x 13": Vertical Boring Mill
Make: Kearney & Trecker
Model: 10HP-3CH
Capacity: Table - 64" x 13"
Electrical: 220/3 phase
|
|
Ad # 15384 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
9" x 48": Bridgeport Knee Mill
Capacity: Table 9"x 48"
Electrical: 230/3 phase
X and Y axis power feed
|
|
Ad # 15384 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
9" x 48": Bridgeport Knee Mill
Capacity: Table 9"x 48"
Electrical: 230/3 phase
X and Y axis power feed
|
|
Ad # 15377 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
Table Size: 9" x 42": Bridgeport Knee Mill
step pulley head
Capacity: 9" x 42" table
Electrical: 230/3 phase
X and Y axis power feed |
|
Ad # 15376 | Horizontal Mills |
1954? |
Kearney & Trecker |
5 HP - 2 CH |
Good |
sold |
Photo /
More Info. |
Table Size: 12" x 50" with arbor support: Horizontal Mill with arbor support
Make: Kearney & Trecker
Model: 5HP - 2CH
Capacity: Table 12" x 50"
Electrical: 230/3 phase |
|
Ad # 15376 | Horizontal Mills |
1954? |
Kearney & Trecker |
5 HP - 2 CH |
Good |
sold |
Photo /
More Info. |
Table Size: 12" x 50" with arbor support: Horizontal Mill with arbor support
Make: Kearney & Trecker
Model: 5HP - 2CH
Capacity: Table 12" x 50"
Electrical: 230/3 phase |
|
Ad # 15377 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
Table Size: 9" x 42": Bridgeport Knee Mill
step pulley head
Capacity: 9" x 42" table
Electrical: 230/3 phase
X and Y axis power feed |
|
Ad # 13699 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
57031 |
Good |
sold |
Photo /
More Info. |
Table size 9" x 42": Bridgeport Knee Mill
step pulley head for speed change
Model: 57031
Table size: 9" x 42"
Throat: 19"
220/ 3 phase
Sony DRO |
|
Ad # 13699 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
57031 |
Good |
sold |
Photo /
More Info. |
Table size 9" x 42": Bridgeport Knee Mill
step pulley head for speed change
Model: 57031
Table size: 9" x 42"
Throat: 19"
220/ 3 phase
Sony DRO |
|
Ad # 13684 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
Series II |
Good |
sold |
Photo /
More Info. |
60" x 12" series 2: Bridgeport Vertical Bed Mill
Model: Series II
vari-speed head
table size: 60" x 12"
230/3 Phase
HP: 2
Volts: 200,400 |
|
Ad # 13683 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Fair |
sold |
Photo /
More Info. |
36" x 9" table: Bridgeport knee Mill series 1
table size: 36"x 9"
step pully head
230/3 Phase
HP: 2 |
|
Ad # 14289 | Knee Mills (Bridgeport Type) |
1980's |
Millport |
2S |
Fair |
sold |
Photo /
More Info. |
42" x 9" Table: Millport Milling Machine
Model: 2S
Capacity: 42" x 9" Table
Electrical: 230/ 3 phase
Servo Power Feed
R-8 Spindle
Step Pulley; 16 Speeds: 80 - 5440 RPM's
9in. x 42in. Table
3 Spindle Down Feeds: .015; .003; .006
Quill Travel 5in.
Mill Vise 6in.
R-8 Collets
|
|
Ad # 14289 | Knee Mills (Bridgeport Type) |
1980's |
Millport |
2S |
Fair |
sold |
Photo /
More Info. |
42" x 9" Table: Millport Milling Machine
Model: 2S
Capacity: 42" x 9" Table
Electrical: 230/ 3 phase
Servo Power Feed
R-8 Spindle
Step Pulley; 16 Speeds: 80 - 5440 RPM's
9in. x 42in. Table
3 Spindle Down Feeds: .015; .003; .006
Quill Travel 5in.
Mill Vise 6in.
R-8 Collets
|
|
Ad # 14284 | Knee Mills (Bridgeport Type) |
|
Acra |
AM-3VAC |
Good |
sold |
Photo /
More Info. |
54" x 10" table: Acra Milling Machine
Model: AM-3VAC
Capacity: 54" x 10"
Electrical: 230/3 phase
SPECIFICATIONS:
- x-axis: 39.5"
- y-axis: 16.5"
- z-axis (knee): 16"
- quill travel: 5"
- spindle speeds: 50 - 5000 rpm
- spindle motor: 3 hp
Anilam DRO
Manual included
Has its own 3 phase converter |
|
Ad # 14284 | Knee Mills (Bridgeport Type) |
|
Acra |
AM-3VAC |
Good |
sold |
Photo /
More Info. |
54" x 10" table: Acra Milling Machine
Model: AM-3VAC
Capacity: 54" x 10"
Electrical: 230/3 phase
SPECIFICATIONS:
- x-axis: 39.5"
- y-axis: 16.5"
- z-axis (knee): 16"
- quill travel: 5"
- spindle speeds: 50 - 5000 rpm
- spindle motor: 3 hp
Anilam DRO
Manual included
Has its own 3 phase converter |
|
Ad # 14261 | Knee Mills (Bridgeport Type) |
|
Well-Setting |
942 |
Good |
sold |
Photo /
More Info. |
9" x 49" Table: Well-Setting Manual Mill
Model: 942
Capacity: 9" x 49" Table
Electrical: 230/3Phase
Table Longitudinal Travel (X-Axis).. 36"
Saddle Cross Travel (Y-Axis). 12"
Knee Vertical Travel (Z-Axis).. 16"
Ram Travel.. 12"
Quill Travel..5"
Spindle Taper..#R8
power feed on X
Mitutoyo DRO |
|
Ad # 14261 | Knee Mills (Bridgeport Type) |
|
Well-Setting |
942 |
Good |
sold |
Photo /
More Info. |
9" x 49" Table: Well-Setting Manual Mill
Model: 942
Capacity: 9" x 49" Table
Electrical: 230/3Phase
Table Longitudinal Travel (X-Axis).. 36"
Saddle Cross Travel (Y-Axis). 12"
Knee Vertical Travel (Z-Axis).. 16"
Ram Travel.. 12"
Quill Travel..5"
Spindle Taper..#R8
power feed on X
Mitutoyo DRO |
|
Ad # 14258 | Planer Mills |
1943 |
Rockford |
Openside OG |
Fair |
Sold |
Photo /
More Info. |
planer mill--3' x 3' x 12': Rockford Hydraulic Planer Mill
Make: Rockford
Model: OG Open side
Electrical: 230/3Phase
SPECIFICATIONS:
TABLE SIZE ............. 32" x 72"
TABLE STROKE ........... 144"
MAX HEIGHT UNDER RAIL .. 36"
APPROX MACHINE SIZE .... 28'L x 7'W x 9'H
|
|
Ad # 14259 | Knee Mills (Bridgeport Type) |
|
Well Setting |
BPS 1642 |
Good |
Sold |
Photo /
More Info. |
9" x 49" Table: Well-Setting Vertical Milling Machine
Model: BPS 1642
Capacity: 9" x 49"
Electrical: 230/3Phase
Table Longitudinal Travel (X-Axis).. 36"
Saddle Cross Travel (Y-Axis). 12"
Knee Vertical Travel (Z-Axis).. 16"
Ram Travel.. 12"
Quill Travel..5"
Spindle Taper..#R8
Acu-Rite DRO |
|
Ad # 14258 | Planer Mills |
1943 |
Rockford |
Openside OG |
Fair |
Sold |
Photo /
More Info. |
planer mill--3' x 3' x 12': Rockford Hydraulic Planer Mill
Make: Rockford
Model: OG Open side
Electrical: 230/3Phase
SPECIFICATIONS:
TABLE SIZE ............. 32" x 72"
TABLE STROKE ........... 144"
MAX HEIGHT UNDER RAIL .. 36"
APPROX MACHINE SIZE .... 28'L x 7'W x 9'H
|
|
Ad # 14259 | Knee Mills (Bridgeport Type) |
|
Well Setting |
BPS 1642 |
Good |
Sold |
Photo /
More Info. |
9" x 49" Table: Well-Setting Vertical Milling Machine
Model: BPS 1642
Capacity: 9" x 49"
Electrical: 230/3Phase
Table Longitudinal Travel (X-Axis).. 36"
Saddle Cross Travel (Y-Axis). 12"
Knee Vertical Travel (Z-Axis).. 16"
Ram Travel.. 12"
Quill Travel..5"
Spindle Taper..#R8
Acu-Rite DRO |
|
Ad # 14251 | Knee Mills (Bridgeport Type) |
|
Yuasa |
TX - 2000 |
Good |
sold |
Photo /
More Info. |
9" x 42" Table: Yuasa Vertical Milling Machine
Model: TX - 2000
Capacity: 9" x 42" table
Electrical: 230/3 phase |
|
Ad # 14103 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
2J |
Good |
sold |
Photo /
More Info. |
Table 9" x 42": Bridgeport Vertical Milling Machine
Model: 2J 1 1/2 HP
Capacity: 9" x 42"
X-Axis Travel 30
Y-Axis Travel 12
Z-Axis Travel (Knee) 16
Quill Travel 5
Ram Travel 12
Throat Distance 6-3/4 - 18-3/4
Spindle Speeds (Variable) 50 - 4200 RPM
Maximum Work Piece Load 750 LBS
Spindle Taper R-8cal: 230/ 3 phase
COMES WITH A JET TPFA-2 AUTOFEEDER, VISE AND
TOOLING
Machine was rebuilt 4 months ago, but is no
longer
needed.
|
|
Ad # 13928 | Knee Mills (Bridgeport Type) |
? |
Turn-Pro |
GS18V |
Excellent |
SOLD |
Photo /
More Info. |
10" x 54" table: Turn-Pro Vertical Milling Machine
Model: GS18V
Used very little, like new condition.
10 x 54" Table
3 hp Variable Speed head
R8 Taper
Power Table Feed
X - Y Axis, Anilam Wizard 450 Digital Read Out
Z Axis scale installed on head and works but
the reader only has 2 axis.
|
|
Ad # 13805 | Knee Mills (Bridgeport Type) |
? |
Gorton |
Mastermill |
Good |
sold |
Photo /
More Info. |
Table Size 48" x 12": Gorton Mastermill
Capacity: 48" x 12" table
Electrical: 220/ 3 phase
2.5 HP
Power Knee
|
|
Ad # 15402 | Manual Mill, Parts and Accessories |
|
Kearney & Trecker |
|
Excellent |
sold |
Photo /
More Info. |
: Various Tooling/change gears for Boring Mill
Fits: Kearney & Trecker Mills |
|
Ad # 15400 | Horizontal Mills |
1950's |
Cincinnati |
No.3 |
Good |
sold |
Photo /
More Info. |
Table Size: 16" x 64": Horizontal Boring Mill
Make: Cincinnati
Model: No.3
Electrical: 230/3 Phase
TABLE SIZE: 16" x 64-3/4"
TABLE TRAVEL: 16"
TABLE CROSS TRAVEL: 34"
SPINDLE TAPER: 50
KNEE TRAVEL UP & DOWN:16"
SPINDLE SPEEDS: 18-450 RPM
SADDLE & TABLE FEEDS: 3/8-90 IPM
RAPID LONG & CROSS: 150 IPM
RAPIDS KNEE: 37 IPM
MAIN MOTOR: 25HP |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14263 | Single Spindle Drill Press |
|
Chas. G. Allen |
30" #2 1/2 |
Good |
sold |
Photo /
More Info. |
Table: 44" x 25" Throat: 1': Single Spindle Drill Press
Make: Chas. G. Allen
Model: 30" #2 1/2
Capacity: Table: 44" x 25" Throat: 1'
DRILLS TO CENTER OF CIRCLE .. 30"
SPINDLE SPEEDS TWO RANGES ... 20 SPEED CHOICES
BACK GEAR (10) ...... 75 - 750 RPM
DIRECT DRIVE (10) ... 300 - 3000 RPM
SPINDLE STROKE ........ 7"
SPINDLE TAPER .... #3MT
SPINDLE FEEDS .... 12 CHOICES
DIRECT DRIVE .. .006, .004 & .002 IPR
BACK GEAR .... .024, .016 & .008 IPR
FINE FEED SETTING FOR 1/4 OF VALUE SHOWN ON
HANDLE
HEAD TRAVEL ...... 10"
TABLE TRAVEL ..... 16" |
|
Ad # 15521 | Single Spindle Drill Press |
? |
Jet |
JDP-17DX |
Excellent |
sold |
Photo /
More Info. |
17" with 14"x18" table: Spindle mounted dual laser guide system
provides a consistent drilling crosspoint on
workpiece
Innovative extra large 14" x 18" work table
features twin T-slot grooves for miter gauge
or
homemade jigs, table has lip designed edge
for
easy clamping of workpiece and a removable
insert
Hinged metal belt and pulley cover provides
easy access to the quick adjustment motor
mount
to allow rapid spindle speed changes
Drill press head has integrated AC worklight
Spindle has high-quality ball bearing
construction for long life
Adjustable spindle depth stop is ideal for
repetitive drilling
Powered by a heavy-duty 3/4HP, 1Ph, 115V
TEFC
motor and poly-v belt drive system
Clutch-type drill stop regulates drilling
depth
Drill press is designed for left or right
hand
operators, handles can be placed on either
side |
|
Ad # 13861 | Single Spindle Drill Press |
? |
Clausing |
20" #2276 |
Excellent |
sold |
Photo /
More Info. |
Table Size: 22" x 19 1/2" Throat: 10": Clausing Variable Speed Drill Press
Model: 2276
Electrical: 230 / 3 Phase
Capacity (hand feed)1-1/4"
Table Size
22" x 19-1/2"
Table slots
2 ea./15-1/2" long for ½" T-Bolts
Table travel, one setting
20"
Spindle to table (max)
33-1/8"
Spindle to base (max)
43-3/8"
Spindle Speed (2 speed infinitely
variable)..150~2000 RPM
Spindle travel
6-1/2"
Spindle nose
#3 Morse Taper
Spindle diameter
1.74"
Quill size ( round steel)
.2-1/2"
Quill return spring capacity
40 lb
Base, working surface, ground
15-1/2" x 13"
Base, T-Slots
2 ea./13" long for ½" T-Bolts
Column size
4" Dia./1/2" thick wall
Drill to center of circle
20" Diameter
|
|
Ad # 13789 | Multi Spindle Drill Press |
|
Allen |
No. 2 1/2 Motor Spindle |
Fair |
sold |
Photo /
More Info. |
: Chas G. Allen
4 Spindle Drill Press
Table size: 25"x62" |
|
Ad # 15398 | Radial Drill Press |
? |
Breda |
R1220MP |
Good |
sold |
Photo /
More Info. |
4ft arm: Radial Arm Drill Press
Capacity: 4ft arm
Make - Breda (Italy)
Model - R1220MP
Drilling Capacity - 65 mm
Arm Length - 1250 mm
Spindle Taper - MT5
Spindle Speed - 30 to 2,200 rpm
- Machine is in excellent working condition
with a refurbished motor
|
|
We found 12 matching ads. Now displaying the remaining 12 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15378 | Vertical Band Saws |
1989 |
Roll-In |
EF 1459 |
Good |
sold |
Photo /
More Info. |
Under Guides: 14 1/4" Throat:8 3/4": Vertical Band Saw (All Purpose)
Make: Roll-In
Model: EF 1459
Electrical: 110/1 phase
Capacity: Under Guides 14 1/4" Throat 8
3/4"
Blade Travel: 9" travel into work
Table Size: 18" x 30" |
|
Ad # 15375 | Horizontal Band Saws |
1989 |
Wellsaw |
1016 |
Good |
sold |
Photo /
More Info. |
Round 10.5" Flat 16.5" Rectangular 10"x 16": Horizontal Band Saw
Make: Wellsaw
Model: 1016
Capacity:
Round 10.5"
Flat 16.5"
Rectangular 10" x 16"
45 degree 10" x 9"
Electrical: 110/1 phase
Blade size: 1" |
|
Ad # 13704 | Cold Saws & Power Hack Saws |
2007 |
Scotchman |
CPO 350VS |
Excellent |
sold |
Photo /
More Info. |
14" Blade-ferrous: Scotchman Variable Speed Cold Saw
Model: CPO 350VS
Votlage: 208 3 phase
HP: 5
RPM: 11/117 variable
Blade Size (inches): 14 (350mm)
Mitering Range: 90 degrees left, 45 degrees
right
Round Solid Capacity 90 Deg (inches): 2
Round Solid Capacity 45 Deg (inches): 1-3/4
Round Tube Capacity 90 Deg (inches): 4-1/2
Round Tube Capacity 45 Deg (inches): 4
Square Tube Capacity 90 Deg (inches): 4
Square Tube Capacity 45 Deg (inches): 4
Rectangle Tube Capacity 90 Deg (inches): 4 x 5
Rectangle Tube Capacity 45 Deg (inches): 4 x 4 |
|
Ad # 13705 | Cold Saws & Power Hack Saws |
1989 |
Dake Mep |
Tiger 350 |
Good |
sold |
Photo /
More Info. |
14" Blade-ferrous cutting: Dake Mep Cold Saw- ferrous
Model: Tiger 350
Capacity: 14" blade
HP: 3
Voltage: 220 3 phase
Blade Speeds (4) 15, 30 , 45, 90 RPM
Motor recently rebuilt
|
|
Ad # 14181 | Horizontal Band Saws |
2002 ? |
Kysor |
KJ10 |
Excellent |
sold |
Photo /
More Info. |
10" x 18" : Kysor Horizontal Band Saw
Model: KJ10
Capacity: 10" x 18"
Electrical: 220/3 phase |
|
Ad # 14180 | Vertical Band Saws |
? |
Rockwell |
20 |
Excellent |
sold |
Photo /
More Info. |
20" throat, table 24" x 24": Rockwell Vertical Band Saw
Ferrous cutting
Model: 20
Series: 28 3x5
Capacity: 20" throat, table 24" x 24"
Electrical: 220/3 phase
Table Tilt: -15/+45 deg.
Variable Speed:
Low: 50-530
High: 450-4500
Blade Length: 12' 6"
Rockwell Motor:
2 HP - 230/460V - 6.2/3.1A
1725 RPM - 60 Hz - 3 PH
|
|
Ad # 14170 | Cold Saws & Power Hack Saws |
2010 |
Scotchman |
CPO 350 LT |
Good |
sold |
Photo /
More Info. |
14" Blade-ferrous cutting: Scotchman Cold Saw
Model: CPO 350 LT
Capacity: 14" blade - ferrous cutting
LT (Low Turn) designed for solid mild stee,
solid
stainless steel & thick wall pipe
Elecrtical: 460/3 phase
TUBING, 90 DEGREES
ROUND: 4-7/8"
SQUARE: 4-3/8" X 4-3/8"
RECTANGLE: 5-1/2" X 4"
TUBING, 45 DEGREES
ROUND: 4-3/8"
SQUARE: 4" X 4"
RECTANGLE: 4" X 4"
SOLID, 90 DEGREES
ROUND: 2"
SQUARE: 2" X 2"
SOLID, 45 DEGREES
ROUND: 1-3/4"
SQUARE: 1-3/4" X 1-3/4"
LT: 22/44 RPM
1 blade and owner's manual included |
|
Ad # 15522 | Vertical Band Saws |
? |
Jet |
JWBS 14CS |
Excellent |
sold |
Photo /
More Info. |
14" Throat, Table 15"x15": Jet Vertical Band Saw Ferrous or Wood Cutting
Model: JWBS 14CS
Electrical: 110/1 phase
Jet JWBS-14CS bandsaw includes a 3/8-inch 6
TPI
woodworking blade
Cuts stock up to 6 inches in height and 13.5
inches wide
1 hp motor provides 3000 sfpm of blade
rotation
Guide post has 1/16-inch depth-adjustment
increments between 0 and 6 inches
Roller bearing guides keep the Jet 14-inch
bandsaw blade rotating smoothly, minimizing
overheating
Cast-iron frame and table minimize cutting
vibration, enhancing work stability and
safety |
|
Ad # 13989 | Cold Saws & Power Hack Saws |
? |
? |
? |
Fair |
sold |
Photo /
More Info. |
12" throat, 14" blade: chop saw: Power chop Saw
Electrical: 220/ 3 phase
Capacity: 12" throat
14" blade
great for harder mtls..
Extra blade included |
|
Ad # 13984 | Tilt Frame Vertical Band Saw |
1989? |
Hem |
V125M |
Good |
sold |
Photo /
More Info. |
18" x 25" @ 90 deg. 18" x 18" @ 45 deg.: Hem Vertical Band Saw (tilt frame)
Model: V125M
Capacity: 18" x 25" @ 90 deg. 18" x 18" @ 45
deg.
Blade Size: 1 1/4" x 17'
Motor: 5 HP
80 PSI |
|
Ad # 13909 | Vertical Band Saws |
? |
National |
A |
Good |
sold |
Photo /
More Info. |
30" Throat: National Vertical Band Saw
Model: A
Capacity: 30" Throat
Table size: 2'x 4'
Electrical: 110/1 Phase |
|
Ad # 13785 | Cold Saws & Power Hack Saws |
1992 |
Scotchman |
Bewo CPO 250 |
Good |
sold |
Photo /
More Info. |
10" Blade: 10" (250 MM) BLADE CAPACITY
MANUAL CLAMP FOR MATERIAL VISE
MITER LOCKING DEVISE, STOPS AT 45*
LEFT, 90* STRAIGHT AND 45* RIGHT
Scotchman CP0 250 Cold Saw
ROUND CAPACITY 3-3/8"
45 DEGREE CAPACITY 2-1/2"
SQUARE CAPACITY 3" x 3"
RECTANGLE CAPACITY 3-1/2"x 2-3/8"
2 SPEED 60/120 RPM |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14253 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type 1R |
Good |
sold |
Photo /
More Info. |
10" Swing x 20" between centers: Landis Universal Cylindrical Grinder
Model: Type 1R
Capacity: 10" swing x 20" between centers
Electrical: 230/ 3 phase
Maximum Swing over Table 10"
Distance between Centers 20"
Table Traverse Speed2-240 IPM
Traverse Handwheel Graduation.001"
Traverse per Turn of Handwheel.200"
Swivel Table Graduated Degrees Included Angle
20°
Swivel Table Graduated Degrees Inches per Foot
4"
Headstock Center#10 Jarno
Tailstock Center#6 Jarno
Headstock Swivel120°
Standard Grinding Wheel Size12" x 1" x 5"
Maximum Width Full Wheel1.5"
Wheel Spindle Speed2000 & 2530 RPM
Maximum Hydraulic Infeed.090
Rapid Infeed Stroke1"
Grinding Wheel Swivel90° L-R
|
|
Ad # 13911 | Belt & Disc Grinders |
? |
Do-all |
BF |
Good |
sold |
Photo /
More Info. |
16" Throat Table 20" x 20": band file type: Doall Vertical Band File
Model: BF
Capacity: 16" throat
Table: 20" x 20" |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15397 | Metal Shapers, Horizontal |
? |
Gould Eberhardt |
16 Inch Universal |
Good |
sold |
Photo /
More Info. |
16" Stroke: MetalShaper (Horizontal)
Make: Gould Eberhardt
Model: 16 Inch Universal
Capacity: 16" Stroke
Approximate 12" Horizontal and Vertical
Table
Travel
Horizontal Head Adjustment
5 H.P. Motor
Electrical: 230/460/3 wired 230
Machine is under power and in great working
order.
Parts manual and service records included. |
|
Ad # 15397 | Metal Shapers, Horizontal |
? |
Gould Eberhardt |
16 Inch Universal |
Good |
sold |
Photo /
More Info. |
16" Stroke: MetalShaper (Horizontal)
Make: Gould Eberhardt
Model: 16 Inch Universal
Capacity: 16" Stroke
Approximate 12" Horizontal and Vertical
Table
Travel
Horizontal Head Adjustment
5 H.P. Motor
Electrical: 230/460/3 wired 230
Machine is under power and in great working
order.
Parts manual and service records included. |
|
Ad # 15414 | Metal Shapers, Horizontal |
1941 |
Morey |
No. 12M |
Good |
sold |
Photo /
More Info. |
Vertical:12" Stroke, 24" table: Vertical Metal Shaper/Slotter
Make: Morey
Model: No.12M
Capacity: 12" Stoke, 24" table
Electrical: 230/3 phase
- Rotary Table Diameter24"
- Maximum Diameter of Work Piece 54"
- Vertical Clearence Under Ram 20"
- Vertical Stroke of Ram 12" |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13863 | Tap & Metal Disintegrators |
? |
Uni-Tek |
100D-HD |
Excellent |
sold |
Photo /
More Info. |
60 amp: Uni-Tek 100-HD Electrode Tap Disintegrater
Electrical: 220/ single phase
Amps: 16
Cycles: 50/60 |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15467 | Horizontal and Vertical Hones |
? |
Sunnen |
MBB 1290 D |
Good |
sold |
Photo /
More Info. |
Honing Diameter .120" x 6": Precision Horizontal Honing Machine
Make: Sunnen
Model: MBB 1290 D
Capacity: 6"
Electrical: 110/1 phase
Honing Diameter .120" x 6"
Maximum Hone Length 16"
Honing Speeds 300, 450, 650, AND 800
Stroke Speeds 80, 110, 160, 220, 310 STROKES
PER MINUTE
Oil Tank Capacity 12 Gal
no tooling included or mandrels |
|
We found 12 matching ads. Now displaying the remaining 12 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13674 | Power Squaring Shear (Mechanical) |
? |
Niagara |
1016 |
Good |
sold |
Photo /
More Info. |
Mild Steel 16ft x 3/8" : 18-8 Stainless 1/4": Niagara Power Squaring Shear
Model: 1016
Capacity:Mild Steel - 16ft Length x
3/8"
18-8 Stainless 1/4"
includes:12' squaring arm and front
sheet
support
Voltage: 220/440 3 Phase
HP:30
High speed-approx 15/min strokes
new line starter installed recently
Note: ran good when taken out of
serviced
and tarped/covered well for storage-no rust
Rigging/Loading fee:$1000.00
blades are sharp-machine is ready to go
|
|
Ad # 13674 | Power Squaring Shear (Mechanical) |
? |
Niagara |
1016 |
Good |
sold |
Photo /
More Info. |
Mild Steel 16ft x 3/8" : 18-8 Stainless 1/4": Niagara Power Squaring Shear
Model: 1016
Capacity:Mild Steel - 16ft Length x
3/8"
18-8 Stainless 1/4"
includes:12' squaring arm and front
sheet
support
Voltage: 220/440 3 Phase
HP:30
High speed-approx 15/min strokes
new line starter installed recently
Note: ran good when taken out of
serviced
and tarped/covered well for storage-no rust
Rigging/Loading fee:$1000.00
blades are sharp-machine is ready to go
|
|
Ad # 14315 | Power Squaring Shear (Mechanical) |
1966 |
Cincinnati |
1008 |
Good |
sold |
Photo /
More Info. |
8ft. x 10 gauge: Cincinnati Power Squaring Mechanical Shear
Model: 1008
Capacity: 8ft. x 10 Gauge
Maximum Cutting Length:8' or 96"
Maximum Cutting Thickness:10 Gauge (Mild Steel)
12 Gauage (Stainless)
Maximum Strokes Per Minute:65
Standardd Back Gage Range:36"
Number of Hydraulic Holddowns:Nine (9)
Blade Size:102" x 3" x 1"
Throat Gap Length:6-1/2"
Shear Is Equipped With:
Hydraulic Holddowns
36" Front Operated Power Back Gauge
6' Squaring Arm
Twenty-One (21) Front Supports
Automatic Lubrication
Scrap Chute
Light Beam
Finger Guards
Mecanical Production Counter
|
|
Ad # 14223 | Power Squaring Shear (Hydraulic) |
? |
Hydra Tool Company |
HTC: 250-12SR |
Good |
sold |
Photo /
More Info. |
1/4" x 12 ft.: Hydra Tool Hyrdraulic Shear
Model: HTC 250-12SR
Capacity: 1/4" x 12 ft
Cutting capacity:1/4"
Overall Cutting Length:12'
Length of Knives:144"
Speeds Approx:207 IPM Down
Speeds Approx:276 IPM Up |
|
Ad # 14210 | Power Squaring Shear (Mechanical) |
? |
Clausing Edwards |
3.5/3000 |
Fair |
sold |
Photo /
More Info. |
10 Ft. x 10 Gauge: Clausing Edwards Mechanical Shear
Model: 3.5/3000
Capacity: 10ft. x 10 Gauge
Electrical: 230/460/3 phase |
|
Ad # 14164 | Power Squaring Shear (Mechanical) |
1976 |
Wysong |
1010 |
Excellent |
sold |
Photo /
More Info. |
10ft x 10 gauge: Wysong Mechanical Power Shear
Model: 1010
Capacity: 10ft. x 10 Gauge
Electrical: 230/460/3 wired 230
Capacity (Mild Steel):10 Ga.
Max. Cutting Length:120"
Rake of Upper Blade:3/8"
Number of Hold Downs:16
Back Gauge Range:36"
Strokes Per Minute:60
Equipped with:
Front Operated Power Back Gauge With Indicator
Square Arm
2 - Large Front Supports
One Shot Lube System
Electric Foot Pedal
Owner's Manual Included
|
|
Ad # 13985 | Power Squaring Shear (Mechanical) |
? |
Diacro |
36 Power Shear |
Good |
sold |
Photo /
More Info. |
36" x 16 Gauge: Diacro Mechanical Shear
Model: 36
Capacity: 36" x 16 Gauge
Electrical: 230 / 3 phase
Strokes per minute: 180
Length capacity: 37-3/4"
Rake angle: 3/8" |
|
Ad # 13981 | Power Squaring Shear (Mechanical) |
? |
Pexto |
G-3120-C |
Good |
sold |
Photo /
More Info. |
10ft x 10 gauge: Pexto Mechanical Shear
Model: G-3120-C
Capacity: 10ft x 10 Gauge Mild Steel, 14 Gauge
Stainless steel
Electrical: 220 / 3 phase
3 HP
|
|
Ad # 13946 | Power Squaring Shear (Mechanical) |
1967 |
Diacro |
48" Power Shear |
Good |
sold |
Photo /
More Info. |
4ft x 16 Gauge Mild Steel: Diacro 48" Power Shear
Model: 48
Capacity: 4' x 16 Gauge Mild Steel
4' x 18 Gauge stainless steel
Electrical: 220/3 phase
Length of knives: 50"
Rake angle: 5/16"
S.P.M. approx.: 160
EQUIPPED WITH:
18" front operated manual back gauge
with readout
Electric foot switch
(1) stock support arm
Pushbuttons for start - stop
(2) T-slots in top of bed
Production counter
Rear parts chute
1.5 HP 1725 RPM 208/220/440/3/60 motor
|
|
Ad # 13937 | Power Squaring Shear (Hydraulic) |
1987 |
LVD |
JS 25/10 |
Good |
sold |
Photo /
More Info. |
10' x 1/4": LVD Hydraulic Shear
Model: JS 25/10
Length of Cut: 10ft
Max Thickness: 1/4"
Total Power: 15 HP
Electrical: 230/ 3 phase
Tons: 16.5
power back gage 30" ?
squaring arm |
|
Ad # 13923 | Foot Stomp & Air Operated Shear |
? |
Tennsmith |
5216 |
Good |
sold |
Photo /
More Info. |
52" x 16 Gauge Mild Steel: Tennsmith Foot Squaring Shear
Model: 5216
Capacity: 52"
16 Gauge Mild Steel
20 Gauge Stainless Steel
Note: Shear available upon arrival of replacement |
|
Ad # 15473 | Power Squaring Shear (Hydraulic) |
|
Cincinnati |
1408 |
Good |
sold |
Photo /
More Info. |
8ft.x 3/16" Mild Steel: Hydraulic Power Squaring Shear
Make: Cincinnati
Model: 1408
Capacity: 8ft.x3/16"
LENGTH OF KNIVES: 8'4"
DISTANCE BETWEEN HOUSINGS: 8'3"
GAP: 18"
RAKE ANGLE: 1/4"
HOLDDOWNS: 9
HOLDDOWN TO KNIFE EDGE: 5/8"
DISTANCE UNDER HOLDDOWNS: 3/8"
FLOOR TO TOP OF BED: 32"
S.P.M. APPROX.: 60
EQUIPED WITH:
SQUARING ARM
FULL LENGTH FOOT TREADLE
AUTOMATIC OIL LUBRICATION
SPRING COUNTERBALANCES
(4) DOVETAIL SLOTS IN TOP OF BED D
5 HP
*comes with an extra set of blades
Blades currently on machine have recently been
sharpened. |
|
We found 13 matching ads. Now displaying the remaining 13 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13696 | Press Brakes (Hydraulic) |
? |
Diacro |
16-72 |
Good |
sold |
Photo /
More Info. |
25 Ton x 72": Diacro Hydra Power Press Brake
Model: 16-72
CNC Diacro Back Gauge
Length of Bed 72"
Distance between housings 62"
Capacity in mild steel (6') 16 ga.
Stroke 2"
Ram Adjustment 3"
Throat clearance 9"
Horsepower 3hp
Floor space 44" X 72" X 92" high
Weight 5,000 lbs
|
|
Ad # 13694 | Straight Apron Brakes |
? |
Tapco |
Commerical |
Excellent |
sold |
Photo /
More Info. |
10'6" Length x 35 gauge alum. or 24 gauge steel: Tapco Maximum Port-O-Bender
Model: Commercial
Capacity: 10'6" x 1 3/4" mouth opening, 14"throat
depth
Aluminum - 35 ga.
Steel - 24 ga.
Copper - 32 oz.
Very Portable to job site.
No power needed.
Comes with Port-O-Slitter and Operational Manual |
|
Ad # 14415 | Press Brakes (Hydraulic) |
? |
Roto Die |
10 |
Good |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 14287 | Straight Apron Brakes |
|
Chicago Dreis & Krump |
818 |
Fair |
sold |
Photo /
More Info. |
Capacity: 8' x 18 ga. mild steel 22 ga. stainless steel: Chicago Dreis & Krump Straight Apron Brake
Model: 818
Capacity: 8' x 18 ga. mild steel
8' x 22 ga. stainless steel
|
|
Ad # 14256 | Straight Apron Brakes |
|
|
|
Good |
sold |
Photo /
More Info. |
4ft x 14 Gauge: Straight Apron Hand Brake
Capacity: 4ft. x 14 Gauge |
|
Ad # 14221 | Finger Brakes-Box & Pan Brakes |
? |
Tennsmith |
HBU 48 16 |
Fair |
SOLD |
Photo /
More Info. |
4ft x 16ga: Tennsmith Finger Box & Pan Brake with Bench
Model: HBU 48 16
Capacity: 48" x 16 Gauge
|
|
Ad # 14208 | Finger Brakes-Box & Pan Brakes |
? |
Tennsmith |
HBU 48-12 |
Good |
sold |
Photo /
More Info. |
: Tennsmith Finger Box & Pan Brake
Model: HBU 48-12
Capacity: 48" x 12 Gauge mild steel
16 Gauge Stainless steel
|
|
Ad # 14212 | Press Brakes (Hydraulic) |
1960 |
Chicago |
SB 103 |
Fair |
sold |
Photo /
More Info. |
10ft. x 20 Gauge or 5ft. x 18 Gauge: Chicago Hydraulic Press Brake
Model: SB 103
Capacity:
10ft. x 20 Gauge (5/8")
5ft. x 18 Gauge
25 Strokes per min
2" Stroke
|
|
Ad # 14189 | Straight Apron Brakes |
2001? |
Tennsmith |
HB 121 |
Excellent |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Tennsmith Sraight Apron Hand Brake with Drop table
Model: HB 121
Capacity: 16 Gauge x 10ft. |
|
Ad # 14178 | Press Brakes (Mechanical) |
? |
Mercury |
6508 |
Excellent |
sold |
Photo /
More Info. |
10 ft. x 10 Gauge 100 Ton: Mercury Mechanical Press Brake
Capacity: 10ft. x 10 Gauge (100 Ton)
Model: 6508
Specifications:
Bending Capacity: 10ga.
Overall Bending Length: 10'
Distance Between Housings: 8' 6"
Stroke: 3"
Max. Die Space: 12"
Adjustment: 5"
Equipped With:
Lower Die Rail
Upper Die Holders
Removable Flange
|
|
Ad # 14034 | Straight Apron Brakes |
? |
Pexto |
PX 24-A |
Good |
sold |
Photo /
More Info. |
24" x 16 Gauge soft steel: Pexto Hand Brake
Model: PX 24- A
Capacity: 24" x 16 Gauge soft steel |
|
Ad # 14036 | Press Brakes (Hydraulic) |
? |
Bantam |
B 412 |
Good |
sold |
Photo /
More Info. |
4ft. x 12 ton 18 gauge mild steel: Bantam Press Brake (Pneumatic)
Model: B 412
Capacity: 4ft x 12 Ton
Tooling Space (in.)8-7/8
Ram Stroke (in.)0 - 1-7/8
Bed Adjustment (in.)2
Throat Depth (in.)5-3/4
Shut Height (in.)7-1/2
Bed and Ram Thick (in.)1-1/4
Ram Height (in.)9-7/8
Bed Width (in.)48
Between Housings (in.)48-1/4
Back Gauge Depth (in.)0 - 18
Maximum Free Air (ft³)2.2
Maximum Speed @ Full Stroke (SPM)30
Tooling pictured included
Users Manual Included |
|
Ad # 13802 | Straight Apron Brakes |
? |
Dreis & Krump |
Chicago Steel Bending Brake |
Good |
sold |
Photo /
More Info. |
8' x 16 gauge: Chicago Steel Bending Brake
Capacity: 8' x 16 gauge |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13698 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1956 |
Webb |
9L |
Fair |
Sold |
Photo /
More Info. |
8' 2" x 3/4" plate steel: Webb Initial Pinch Plate Bending Roll
Model: 9L
Capacity: 8'2" x 3/4" Plate Steel
Rolls: 3
Roll Diameter: 13"
220/440 3 Phase
HP: 20
machine was in good running condition when taken out of service-should just need a little cleaning up..
|
|
Ad # 14214 | Slip Rolls (Manual & Mechanicaly Operated) |
? |
Roper Witney Pexto |
88 1D |
Fair |
sold |
Photo /
More Info. |
22 Gauge x 36": Roper Witney Pexto Manual Slip Roll
Model: 881 D
Capacity: 22 Gauge x 36" |
|
Ad # 14209 | Slip Rolls (Manual & Mechanicaly Operated) |
? |
Tennsmith |
SR 48 |
Good |
sold |
Photo /
More Info. |
48" x 16 gauge mild steel: Tennsmith Powered Slip Roll
Model: SR48
Capacity:
16 Gauge mild steel
Maximum forming length: 49"
Diameter of rolls: 3"
HP: 3/4
Electrical: 230/3 phase |
|
Ad # 13958 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1974 ? |
Bertsch |
# 14 |
Good |
sold |
Photo /
More Info. |
12' x 3/4" & 19/32" pipe duty: Bertsch Plate Bending Roll, Pyramid type
Model: #14, 15" x 12' heavy duty,
Initial
Pinch
Bending Roll
Capacity: 12' x 3/4" mild steel capacity
boiler
duty, 19/32" pipe duty
Rear roll geared, and lower rolls
grooved
longitudinally; floating hinge bearing;
Air
cylinder system for drop hinge operation,
complete
with valve lubricator; 12" dia. dial type
position
indicator for rear roll
Front and rear mounted emergency "stop"
tension
cables; Guards enclosing gears
Arranged for power adjustment to lower
front
pinch roll; Arranged for double motor
drive,
with
motors and controls mounted and wired.
Motors: for 230/3/60 characteristics:
30 HP, 1200 RPM, main: motor with
mounted
brake
and stepless control = #85438 (H)
15 HP, 1200 RPM, rear roll adj: motor
with
mounted brake and control = #85438(H)
(2) 1 HP, 900 RPM, flange-foot mounted
front
roll
adj: motors with special frames
Gear covers included (not pictured)
No pit is required except for the hinge
cylinder
unless the working height can be
tolerated.
Machine sold for $70,000 in 1974 |
|
Ad # 13940 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1980 |
Bertsch |
#11 |
Good |
sold |
Photo /
More Info. |
10' x 1/2" thick: Bertsch Plate Bending Rolls
Model: #11
Capacity: 10' x 1/2" ; 26" x 1"
Diameter of rolls: 14"
Heavy duty, Initial Pinch type bending
roll, Grade A-285 steel capacity, 11/16" x
10'
to 96" and larger dia. in "one pass" boiler
duty, 19/32" x 10' to 15 1/2" dia. in "one
pass" pipe duty, built with: Rear roll
geared,
lower rolls grooved longitudinally approx.
3'
on each side; Floating hinge bearing; 0" to
approx. 2" pinch opening; Air cylinder
system
for drop hinge operation; Guards enclosing
gears; Centralized, Farval grease
lubrication
system; Front and rear emergency "stop"
tension
cables; Arranged for double motor drive,
with
motors and controls mounted and wired
Electrical:460/3 phase
25 HP main motor
15 HP rear roll adjusting motor
(2) 3/4 HP squirrel cage motors
No pit is required except for the hinge
cylinder unless the working height can be
tolerated.
List Price of machine in 1980,
$95,750.00 |
|
We found 53 matching ads. Now displaying the remaining 53 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15390 | Joining: Riveters, Crimping, Beading and Flanging |
2006 |
Enco |
330399 |
Good |
Sold |
Photo /
More Info. |
20 Gauge: Pittsburgh Lock
Former Machine with
Flanger
Make: Enco
Year: 2006
20 Gauge
|
|
Ad # 15380 | Plate & Bending Rolls: Initial Pinch/Plate |
1942 |
Bertsch |
#9 |
Good |
sold |
Photo /
More Info. |
1/2" x 8ft: Initial Pinch Plate Bending Roll
Make: Bertsch
Model: #9
Capactiy: 1/2" x 8ft.
Roll Length: 96"
Roll Diameter: 10"
Electrical: 460/3 phase
Built with rear roll geared
Lower roll grooved longitudinally
Brass bearings throughout
Air controlled hinge
Steel gears with guards
Main drive motor 15HP
Machine is currently under power and in
operation.
Does not require to be set in pit to
accommodate cylinder. Machine is lifted
on
stands.
|
|
Ad # 15370 | Hole Punches: Single,Turret and CNC |
1984? |
W.A. Whitney |
620 PULSA |
Fair |
sold |
Photo /
More Info. |
Table: 7ft. x 6ft: CNC Turret Punch Press
Make: W.A. Whitney
Model: 620 Pulsa
Electrical: 440/3 phase
20 Station
Westinghouse Producer II Controller
4″ max punch capacity, 1500″ IPM, lots of
tooling
Original price New $134,000
|
|
Ad # 15370 | Hole Punches: Single,Turret and CNC |
1984? |
W.A. Whitney |
620 PULSA |
Fair |
sold |
Photo /
More Info. |
Table: 7ft. x 6ft: CNC Turret Punch Press
Make: W.A. Whitney
Model: 620 Pulsa
Electrical: 440/3 phase
20 Station
Westinghouse Producer II Controller
4″ max punch capacity, 1500″ IPM, lots of
tooling
Original price New $134,000
|
|
Ad # 15367 | Plate & Bending Rolls: Initial Pinch/Plate |
? |
Niles Bement Pond |
? |
Fair |
sold |
Photo /
More Info. |
6 ft. X Thickness?: Plate & Bending Rolls: Initial Pinch/Plate
Make: Niles Bement Pond
Length of Rolls: 6 feet
Roll Diameter: 7 inches
This machine is hydraulic and requires a
hydraulic motor, that is not included with
this plate roller. |
|
Ad # 13714 | Brakes Press: Hydraulic |
1960's ? |
Diacro |
18-48 |
Fair |
sold |
Photo /
More Info. |
12 Ton x 4ft : Diacro Hyda-Power Press Brake
Model: 18-48
Capacity: 12 ton x 4ft
voltage: 220/ 3 phase
HP: 3
Overall length of bed & ram: 4'
Distance between housings: 25"
Stroke: 1-1/2"
Ram adjustment: 2"
Shut height S.D.A.U.: 7-1/2"
Throat depth: 6-1/2"
Width of bed: 3/4"
upper die minimal tooling as shown
Rear Operated Hand Back Gauge |
|
Ad # 14419 | Misc. Sheetmetal Equip. |
? |
|
18" x 20 Gauge |
Good |
sold |
Photo /
More Info. |
18" x 20 Gauge: Manual Cleat Bender
Capacity: 18" x 20 Gauge
|
|
Ad # 14417 | Misc. Sheetmetal Equip. |
? |
Stanley Bostitch |
S25-SAW |
Excellent |
sold |
Photo /
More Info. |
26" throat: Stitching Machine
Make: Stanley Bostitch
Model: S25-SAW
Capacity: 26" throat
Electrical: 110/single phase
|
|
Ad # 14416 | Misc. Sheetmetal Equip. |
80's ? |
Tennsmith |
CB 18 |
Good |
sold |
Photo /
More Info. |
18" x 20 Gauge Soft Steel: Cleat Bender
Make: Tennsmith
Model: CB 18
Capacity: 18" x 20 Gauge Soft Steel |
|
Ad # 14392 | Brakes Press: Hydraulic |
? |
Roto Die |
10 |
Good |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
used to bed 16ga angle in hvac shop
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 14393 | Crimping, Beading & Flanging Machines |
? |
Roto Die |
10 |
Fair |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 14359 | Brakes: Manual Hand |
? |
Chicago Dreis & Krump |
520 |
Good |
sold |
Photo /
More Info. |
5ft. x 18 Gauge: Straight Apron Hand Brake
Make: Chicago Dreis & Krump
Capacity: 5 ft. x 18 Gauge
Model: 520 |
|
Ad # 14358 | Notching / Nibbler Machines |
? |
Libert |
1036 |
Good |
sold |
Photo /
More Info. |
10 Gauge , 36" throat-circle shear: Hi Speed Shear/Nibbler-circle shear
Make: Libert
Model: 1036
Capacity: 10 Gauge, 36" throat
Electrical: 110/single phase
no extra tooling
10-45 FPM cutting speed |
|
Ad # 14283 | Crimping, Beading & Flanging Machines |
|
Roto Die |
15 |
Good |
sold |
Photo /
More Info. |
120" x 14 gauge mild Steel, or 16 gauge Stainless Steel: Roto Die Hydraulic Press Brake
Model: 15
Capacity: 10' x 14 gauge mild steel,
10' x 16 gauge stainless steel
Motor 15 HP
Length of Stroke 3"
Strokes / Minute 20 to 50
Die Clearance 2-1/8"
Die Space 7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with
indicators,
length-of-stroke adjustment.
|
|
Ad # 14265 | Brakes Press: Mechanical |
|
Lennox |
2506 |
Good |
sold |
Photo /
More Info. |
6ft. x 16 Gauge: Mechanical Press Brake
Make: Lennox
Model: 25-06
Capacity: 6ft. x 16 Gauge
Electrical: 230/3 phase
6ft. x 16 Gauge
3" ADJ RAM,
2"STROKE,
1.5 HP,
16 GAUGE
All dies and rack included |
|
Ad # 14254 | Brakes Press: Mechanical |
1960's ? |
Chicago Dreis & Krump |
1214 R |
Good |
sold |
Photo /
More Info. |
16ft. x 150 Ton: Chicago Dreis & Krump Mechanical Press Brake
Model: 1214R
Capacity: 150 Ton x 16'
Electrical: 230/ 3 phase
|
|
Ad # 15584 | Brakes: Manual Hand |
? |
Chicago Dreis & Krump |
S-818 |
Good |
sold |
Photo /
More Info. |
8ft x 18 Gauge: Make: Chicago Dreis & Krump
Model: 818
Capacity: 8' x 18 Gauge mild steel
Maximum bending length: 96"
Hand operated
Removable nose bar and angle bar |
|
Ad # 15577 | Brakes Press: Hydraulic |
2012 |
Holem |
WC67Y 50/2500 |
Needs Work |
sold |
Photo /
More Info. |
50 ton x 8ft.: Hydraulic Press Brake nc/plc(go to)backgage controller
Make: Holem
Model: WC67Y-50/2500
Capacity: 50 Ton x 8ft.
Electrical: 460/3 phase
Year: 2012
power back gage
Nominal force(KN)500
Worktable length(mm)2500
Distance between holes(mm)1850
Depth of throat(mm)230
Slider travel(mm)100
Max open height(mm)320
Main power(Kw)5.5
Powered backgauge
equipped with multi groove bottom die
1. The whole machine is made by plate welded
stress and treated by vibration to remove
inner stress, to make sure long
time bending accuracy, rigidity and
stability.
2. Hydraulic system is controlled by double
cylinders, mechanical stopper, torsion bar
to realize synchronization, machine is
runningsmoothly and reliably.
3. Distance of back gauge and stroke of
slide is adjusted by electrical control and
fine-tuning manually, and digital display
device is adopted to make operation more
frequently.
4. Upper mold clamping system is equipped
with deflection compensation system
Note: As seen in photo of the electrical
area, a white wire was cut to foot pedal by mistake. This took the machine out of operation. An electrician should be able to correctly
reconnect wire easily and machine would be in good working order,bought a new unit
|
|
Ad # 15573 | Slip Rolls: Manual & Mechanicaly Operated |
|
National |
NR 4816 |
Excellent |
sold |
Photo /
More Info. |
48" x 16 gauge mild steel: Mechanical Slip Roll
Make: National
Model: 4816
Capacity: 48" x 16 Gauge
Electical 220 3 phase
Maximum Forming Length48 1/4/1226mm
Diameter of Roll3/76mm
Roll Speed 18 rpm/14.13 sfpm
Foot Pedal operated |
|
Ad # 14235 | Crimping, Beading & Flanging Machines |
|
|
|
Fair |
sold |
Photo /
More Info. |
Hand Cleat Bender, 20 Gauge mild steel x 30": Hand Cleat Bender
Capacity: 20 Ga Mild Steel (1.0mm)
Bend Length: 30" (762mm)
Cleat Depth:.500" (12.7mm)
|
|
Ad # 14230 | Misc. Sheetmetal Equip. |
? |
Wilder Machinery |
Workhorse 1624 |
Fair |
SOLD |
Photo /
More Info. |
16 Gauge mild steel x 24": Wilder Workhorse Slitter
Model: 1624
Capacity: 16 Gauge
Throat: 24"
Maxium Slitting Width: 24.25"
Minimum Slitting Width: 1.25"
Motor: 3/4 HP
Electrical: 115v/single phase |
|
Ad # 14234 | Crimping, Beading & Flanging Machines |
|
Lockformer |
Outside Tap Machine |
Fair |
sold |
Photo /
More Info. |
26 Gauge Outside Tap Machine: Lockformer Outside Tap Machine
Capacity: 26 Gauge
Electrical: 220/3 phase |
|
Ad # 14232 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
Pittsburgh Machine |
Fair |
SOLD |
Photo /
More Info. |
20 Gauge: Lockfomer Pittsburgh Machine
Capacity: 20 Gauge
Electrical: 110/ 1 phase |
|
Ad # 14236 | Misc. Sheetmetal Equip. |
|
Duro Dyne |
FDCC-2 |
Good |
sold |
Photo /
More Info. |
: Duro-Dyne Flexible Duct Connector Dispenser
Model: FDCC-2
Handles all common configurations of Duro Dyne
Flexible Duct Connector
Wheels lock to prevent dispenser from moving
360 degress casters for easy maneuverability
around the shop
Capacity for up to 3 rolls of Duro Dyne
Flexible
Duct Connector or Vane Rail
Ball bearing rollers for effortless
dispensing
Shear attachment |
|
Ad # 14225 | Misc. Sheetmetal Equip. |
? |
Glass Master |
Goov-Master 215 |
Fair |
sold |
Photo /
More Info. |
10ft. x 1" and 1.5": Groov-Master Ductboard cutting machine
Make: Glass Master
Model: 215T
Capacity: 10ft. x 1" and 1.5"
Table included
|
|
Ad # 14219 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
|
Fair |
sold |
Photo /
More Info. |
60" x 16 Gauge: Lockformer Bead Roller with Drop table
Capacity: 60" x 16 Gauge
Electrical: 220/110/1 phase |
|
Ad # 14220 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
16 |
Fair |
sold |
Photo /
More Info. |
16 Gauge: Lockformer Pittsburgh Snaplock Machine
Capacity: 16 Gauge
Electrical: 220/ 3 phase
|
|
Ad # 14217 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
22 |
Fair |
sold |
Photo /
More Info. |
22 Gauge: Lockformer Pittsburgh Machine with Flanger
Model: 22
Capacity: 22 Gauge
Electrical: 110/220/1 phase
|
|
Ad # 14213 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
Cleatformer |
Fair |
sold |
Photo /
More Info. |
22 Gauge: Lockformer
Model: Cleatformer
Capacity: 22 Gauge
Electrical: 230/3 phase
Rollformer "S" & Drive Cleat Rolls
Slitting Attachment For "S" Cleats
Slitting Roll For Drive Cleats
Male Snaplock / Button Lock Rollformer |
|
Ad # 15523 | Benders & Swagers: Pipe and Tube |
? |
Enerpac |
Z 12071 |
Good |
sold |
Photo /
More Info. |
: Bending Machine with Hydraulic Acc.
Make: Enerpac
Model: Z 12071
With Enerpac Hush-Pup EEJ-121 Hydraulic Pump
Tooling included |
|
Ad # 15518 | Hole Punches: Single,Turret and CNC |
1970's? |
Strippit |
30/30 Custom |
Good |
sold |
Photo /
More Info. |
30 Tons x 30" throat: Strippit 30/30 Custom Punch (single station)
Electrical: 220/3 phase
PUNCHING CAPACITY - 30 TONS
1" RD IN 1/4" MILD STEEL
3.5" RD IN 12 GA MILD STEEL
THROAT DEPTH - 30"
DIE HEIGHT FROM FLOOR - 39"
STROKE - 5/8"
SHUT HEIGHT- 5-15/32"
SPEED - 165 SPM
VERTICAL TABLE ADJUSTMENT - 2-1/4"
Sold With:
3 1/2" swing arm with tool holder - 2"
notcher
swing arm with holder, punches, and dies -
multiple 1 1/4"swing arm and 2 die adaptors
File Cabinets with miscellaneous tooling
|
|
Ad # 14165 | Brakes Press: Hydraulic |
? |
Roto Die |
10 |
Excellent |
sold |
Photo /
More Info. |
10ft x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is
equipped
with
depth-of-stroke adjustment with
indicators,
length-of-stroke adjustment.
|
|
Ad # 14166 | Crimping, Beading & Flanging Machines |
? |
Roto Die |
10 |
Excellent |
sold |
Photo /
More Info. |
10ft x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge max
6ft. x 10 Gauge max
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7Ί cross-braking groove
85Ί die opening 3/8 wide
85Ί die opening 7/8 wide
30Ί die opening 1/2 wide
Roto-Die hydraulic press brake is
equipped
with
depth-of-stroke adjustment with
indicators,
length-of-stroke adjustment. |
|
Ad # 14161 | Brakes Press: Mechanical |
60's ? |
Chicago |
L series ? |
Good |
sold |
Photo /
More Info. |
30 Ton x 6ft.: Chicago Press Brake - Mechanical
Model: L series?
Capacity: 6ft. x 30 Ton
Electrical: 220/ 3 phase
Distance between housings: 54"
Throat: 6" |
|
Ad # 14162 | Brakes: Manual Hand |
60's ? |
Whitney Jensen |
614 ? |
Good |
sold |
Photo /
More Info. |
6ft x 14 Gauge: Whitney Jensen Straight Apron Hand Brake
(Combination Brake)
Capacity: 6ft x 14 Gauge (Mild Steel)
Can be modified into a Box and Pan Finger brake
Box and Pan Fingers included |
|
Ad # 14039 | Brakes: Manual Hand |
? |
Chicago Deis & Krump |
816 |
Good |
sold |
Photo /
More Info. |
8ft. x 16 Gauge: Straight Apron Hand Brake
Make: Chicago Deis & Krump
Model: 816
Capacity: 8ft. x 16 Gauge Mild Steel & 20 Gauge
Stainless steel
|
|
Ad # 14040 | Shears: Sheet Metal |
? |
Famco |
No.18-36 |
Fair |
sold |
Photo /
More Info. |
18 Gauge x 36": Foot Stomp Shear
Make: Famco
Model: No.18-36
Capacity: 18 Gauge x 36"
Back Gauge included, but not pictured. |
|
Ad # 14039 | Brakes: Manual Hand |
? |
Chicago Deis & Krump |
816 |
Good |
sold |
Photo /
More Info. |
8ft. x 16 Gauge: Straight Apron Hand Brake
Make: Chicago Deis & Krump
Model: 816
Capacity: 8ft. x 16 Gauge Mild Steel & 20 Gauge
Stainless steel
|
|
Ad # 14040 | Shears: Sheet Metal |
? |
Famco |
No.18-36 |
Fair |
sold |
Photo /
More Info. |
18 Gauge x 36": Foot Stomp Shear
Make: Famco
Model: No.18-36
Capacity: 18 Gauge x 36"
Back Gauge included, but not pictured. |
|
Ad # 15505 | Brakes Press: Hydraulic |
2002 |
Piranha |
175-12 |
Good |
sold |
Photo /
More Info. |
175 ton x 12ft.: Hydraulic Press Brake
Make: Piranha
Model: 175-12
Year: 2002
Capacity: 175 ton x 12 ft.
Electrical: 230/ 3 phase
Overall Length of Bed and Ram 12'
Distance Between Housings 10'6"
Bending Capacity 3/16" x 12'
Stroke Length 8"
Open Height 17"
Closed Height 9"
Throat depth 8"
12' 4-Way Die Set
Pedestal Control Station W/Palm & Foot
Controls
Flush Floor Design
Manual back gauge
Owner's Manual included |
|
Ad # 13993 | Shears: Sheet Metal |
2004 |
Tin Knocker |
1624 |
Excellent |
sold |
Photo /
More Info. |
16 Gauge x 24.25": Tin Knocker Slitter
Model: 1624
Capacity: 16 Gauge
Throat: 24"
Maxium Slitting Width: 24.25"
Minimum Slitting Width: 1.25"
Motor: 3/4 HP
Electrical: 115v/single phase
Nice machine with less than 40hrs.
Owner's manual included |
|
Ad # 13990 | Joining: Riveters, Crimping, Beading and Flanging |
|
Metal Manufacturing, Inc. |
|
Good |
sold |
Photo /
More Info. |
24" x 20 Gauge: cleat bender: Cleat Bender
Make: Metal Manufacturing, Inc.
Capacity: 24" x 20 Gauge
|
|
Ad # 15503 | Hole Punches: Single,Turret and CNC |
1991 |
Wiedemann |
C 2500 |
Good |
sold |
Photo /
More Info. |
22 Ton, 49" x 49" sheets: CNC Murata Wiedemann :Turret Punch
Model: C2500
Capacity: Tons 22
Sheet Size:49"x 49" (49" x 98" w/repo)
Hits Per Minute on 1" Centers 200
Number of Turret:Stations 22 (2 Auto
Index)
Tooling style #112
Max Material Thickness:1/4" MS 165
Lbs
Max Hole :Capacity1.125 Hole in 1/4"
3" Hole in .135
Fanuc 0-P control
Notes: Machine is not under
power. Was taken out of
production because it was replaced by a
different machine.
Was in good working order at the time of
removal from power. |
|
Ad # 13967 | Ironworkers: Notching and Nibblers |
? |
Kingsland |
J18 |
Good |
sold |
Photo /
More Info. |
60 Ton: Kingsland Ironworker
Model: J18
Capacity: 60 Ton, two station
will shear plate punch cope and crop.following
angle cropping 4x4x 1/2@ 90degree, 3x3x 5/16 @
45
degree T 3x3x 1/2, CHANNEL 5x 2 1/2, JOIST 5X2
1/2, ANGLE 5X3 1/2 X 3/8 PUNCH 1 1/8 X 1/2 ,
SHEAR
1/2 INCH PLATE COMES COMPLETE WITH HAND OILER
New Blades
Single Phase or Three Phase |
|
Ad # 13968 | Ironworkers: Notching and Nibblers |
? |
Mubea |
KBL 11 N |
Good |
sold |
Photo /
More Info. |
38 Ton: Mubea Ironworker
Model: KBL 11 N
Capacity: 38 Ton
good working machine
you can punch cut bend or notch with it
Chart reads for cutting
rd= 1 5/16 thick
sq = 1 3/16
flat bar 5 1/8 wide x 1/2 thick
notch depth of notch 2 3/4
width of notch 1 1/2
thickness of material 3/8
punching
1 inch hole thru 7/16 material
3/4 thru 1/2 plate |
|
Ad # 15483 | Brakes Press: Hydraulic |
1989 |
Accurpress |
71008 |
Good |
sold |
Photo /
More Info. |
100 ton x 8ft.: Hydraulic Press Brake
Make: Accurpress
Model: 71008
Electrical: 220/3 phase
Capacity: 100 Ton x 8ft.
Overall Length of Bed & Ram:8'
Distance Between Housings:6'4"
Stroke:8"
Open Height:14"
Closed Height:6"
Throat Depth:10"
Bed Height:34"
Some Tooling Included
Manual Backgauge
|
|
Ad # 13932 | Benders & Swagers: Pipe and Tube |
|
Bema |
|
|
sold |
Photo /
More Info. |
1": Bema CNC Tube Bender
Capacity: 1"
Electrical: 220/3 phase
1 Die Included: 1" round |
|
Ad # 13908 | Ironworkers: Notching and Nibblers |
? |
Benchmaster |
181-E |
Good |
sold |
Photo /
More Info. |
5 Ton 1/8": Benchmaster Notcher
Model: 181-E
5 Ton
Capacity: 1/8"
Electrical: 110/1 Phase |
|
Ad # 13907 | Hole Punches: Single,Turret and CNC |
? |
Whitney-Jensen |
130 |
Good |
sold |
Photo /
More Info. |
10 Ton 18" throat: Whitney-Jensen Punch Press
Model: 130
Throat: 18"
10 Ton
Electrical: 230/3 phase |
|
Ad # 13898 | Brakes Press: Mechanical |
1975 ? |
Wysong |
90-10 |
Good |
sold |
Photo /
More Info. |
90 Ton-- 12': Mechanical Press Brake
Make: Wysong
Model: 90-10
Capacity: 90 Ton 12"
Distance Between Housing: 10'-6"
Ram Stroke: 3"
Length Of Bed & Ram: 12'
Tonnage: 90
Weight: 16,800 LBS.
Ram Adjustment: 4"
Shut Height: 12"
Throat: 8-1/2
Strokes Per Minute: 40
Horsepower: 5
|
|
Ad # 15475 | Plate & Bending Rolls: Initial Pinch/Plate |
1999 |
Famar |
A 312 20/2 |
Good |
sold |
Photo /
More Info. |
14 Gauge x 78": Initial Pinch Plate Bending Rolls(Pyramid Type)
Make: Famar
Year: 1999
Capacity: 14 Gauge x 78"
Electrical: 220/3phase
Number of rolls: 3
Roll Diameter: 4.5"
HP: 3
|
|
Ad # 15472 | Brakes Press: Hydraulic |
2008 |
Acra Bend |
US 8810 |
Good |
sold |
Photo /
More Info. |
CNC 88 tons x 10ft.: CNC Hydraulic Press Brake
Make: Acra-Bend
Model: 8810
Capacity: 88 Tons x 10ft.
Tonnage:.................. 88
Bending length:........... 98.4
Dist. Between Housings:... 81.8
Throat Depth:............. 9.8
Stroke Length:............ 3.94
Ram Adjustment:........... 1.96
Fast Approach Speed....... 120 IPM
Fast Return Speed......... 120 IPM
Press Speed............... 20 IPM
Motor Size:............... 10 HP - 220/440V -
3
Phs
Capacities:
MILD STEEL:
9 Ga ............... 8'
5/16" .............. 4
STAINLESS:
13 Ga .............. 8'
ALUMINUM:
1/4" ............... 8'
|
|
Ad # 15432 | Benders & Swagers: Pipe and Tube |
1973 |
Pines |
Teledyne K-24631 No.0.75 |
Good |
sold |
Photo /
More Info. |
No. 0.75 (40mm): Pines Teledyne Hydraulic Tube Bender
Model: K-2431 No.0.75
Capacity: 40mm
Electrical: 220/3 phase
No tooling included
Round Tubing Non Ferrous: Inches 1 1/2 x
.065
Round Tubing: Inches 1 3/8 x .065
Round Tubing Stainless: Inches1 1/8 x .065
Steel Pipe: Inches (1.050 x .154)
Square Tubing: Inches1 x .065
Round Bar: Mild SteelInches1
Square Bar: Mild SteelInches0.675
Max. Horizontal & Vertical
Dimensions: Inches 1.625
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14179 | Tube & Pipe Notchers |
? |
Comaca |
Unipunch |
Excellent |
sold |
Photo /
More Info. |
12" x 12" x 1/4": Comaca Unipunch
Capacity: 12" x 12" x 1/4"
Electrical: 220/3 phase
|
|
Ad # 14035 | Benders-Pipe and Tube |
? |
Hossfeld |
#2 |
Good |
sold |
Photo /
More Info. |
2" tube and pipe-manual bender: Hossfled Bender-manual
Model: #2
Capacity: 2" pipe and tube
Comes with blocks, rollers, pins, handle,
extension and stop
Pipe dies 180 degree bend:
1/2"P x 1.75" CLR
1/2"P x 3" CLR
3/4" P x 4" CLR
1" x 5" CLR
2" x 8" CLR
Tube dies 180 degree bend
3/4" x 3" CLR
7/8" x 8 1/2" CLR
1" x 8" CLR
1" x 3" CLR
3/4" x 7" CLR
1 1/4, 1 1/2, 2" Square tubing crush bend 4"
inside radius
Follow Along large CLR tubing dies:
1" P x 48 CLR
1" P x 24" CLR
1" T x 83" CLR
1" T x 48" CLR
3/4" T x 14" CLR
3/4" T x 13" CLR
|
|
Ad # 13899 | Multi-Slides |
2002 |
Durma |
VHKM 2006 |
Good |
sold |
Photo /
More Info. |
1/4 ": Durma Notcher
Capacity: 1/4 inch
Long cut: 7 3/4 " x 7 3/4"
Angle cut:30 ° -140 °
Container capacity:50 liters
Stroke: 1.4
Strokes per min: 28
Electrical: 220/3 phase |
|
We found 6 matching ads. Now displaying the remaining 6 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13708 | Ironworkers |
1977 |
Metal Muncher |
MM61C |
Good |
sold |
Photo /
More Info. |
49 Ton: Metal Muncher Ironworker 49 Ton
Model: MM61C
Capacity: 49 Ton
Volts: 220 / Single Phase
RATED PUNCHING CAP:49 TON
DIA/THICKNESS: 1-1/16" IN 1/2"
1-3/8" IN 3/4"
BAR SHEAR: 1" X 6", 1/2" X 12"
ANGLE SHEAR: 4" X 4" X 3/8"
COPER SQUARE NOTCHER. 3" X 3" X 3/8"
THROAT: 9"
BED SLOT WIDTH: 4"
OPERATING PRESSURE: 3500 PSI
MOTOR: 7HP
|
|
Ad # 14412 | Manual: Hole / Turret Punches |
|
Wiedemann |
R2 |
Good |
sold |
Photo /
More Info. |
: Manual Turret Punch (rotex type)
Make: Wiedemann Machine Co.
Model: R2
Capacity: 5 Ton, 12 Stations, 12" throat |
|
Ad # 14183 | Powered: Hole / Turret Punches |
? |
Thor |
1210 AH |
Excellent |
sold |
Photo /
More Info. |
10 Station, 12" throat, 1" Dia. 14 Gauge Mild Steel: Thor Turret Punch Press - Air over Hydraulic
Model: 1210 AH
Capacity:
10 Stations
12" throat
1" Dia hole
14 Gauge Mild Steel
Cycles: 60 strokes / min
|
|
Ad # 14182 | Powered: Hole / Turret Punches |
? |
Rotex |
18 ACH-63 |
Excellent |
sold |
Photo /
More Info. |
18 Station, 24" throat, 25-30 tons of force: Rotex Hydraulic Turret Punch
Model: 18 ACH-63
Capacity: 18 Stations, 24" throat, 25-30 Tons of
force, 2" max punch size
Electrical: 230/3 phase
Example of punch capacity thicknesses@25tons in
mild steel: 1/2" hole thru 1/2" , 3/4" hole thru
7/16",1" hole thru 5/16", 1-1/2" hole thru 3/16",
2" hole thru 1/8"
|
|
Ad # 14155 | Ironworkers |
2002 |
Mubea |
HIW 750/510 |
Good |
sold |
Photo /
More Info. |
82 Ton: Mubea Ironworker
Capacity: 82 Ton
Model: HIW 750/510
Electrical: 230/460/3 phase
Punching:
Max. Tonnage.......82 Ton
Punch Capacity.....1-1/4 Hole Thru 3/4 Plate
Max Stroke Length .3-1/8"
Throat.............20"
Bar Shear:
Flat Max. Thickness...12" x 3/4
Flat Max. Width.......18 x 5/8
Angle Shear:
Max. Size.............6" x 6" x 1/2"
Coper Notcher:
Max Size..............2-1/16" x 3-1/2" x 7/16"
Round/Square:
Max. Size ............2"
Motor Size............10 HP
(5) Separate Work Stations:
Punching......Standard
Angle.........Standard
Flat Bar......Standard
Notching......Standard
Rod/Square....Standard
|
|
Ad # 13870 | Ironworkers |
1975 ? |
Mubea |
BF 10 |
Fair |
sold |
Photo /
More Info. |
21 Ton-mechanical type: Mubea Ironworker
Model: BF 10
Capacity: 21 Ton
mechanical ironworker
Electrical: 230/ 3 phase
Round Holes...1 1/4" in 3/16" & 9/16" in 7/16"
Number of Strokes Per Minute...72,
Depth of the Throat...2"
Plate Shear...6"x 5/16",
Angles...3x3x5/16"@
90A degree 2x2x4 1/4"@ 45A degree,
Round Bar & Square Bar...1 3/32",
Channel...2 3/4"x 1/2"x 6"@ 90A degree
Some tooling included |
|
We found 9 matching ads. Now displaying the remaining 9 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14410 | Spot Welders |
|
Eisler |
19" throat |
Good |
sold |
Photo /
More Info. |
19" Throat, 10 KVA, 46 AMP: Eisler Spot Welder
Capacity: 19" throat, 10 KVA, 46 Amp |
|
Ad # 14411 | Spot Welders |
|
Taylor |
WB-18-20 Foot Oper. |
Good |
sold |
Photo /
More Info. |
18" throat, 20 KVA: Spot Welder
Make: Taylor Winfield
Capacity: 18" Throat, 20 KVA
Foot Operated
Electrical: 220/single phase |
|
Ad # 15578 | Portable Welders |
? |
Lincoln |
SA 300-TM27 |
Good |
sold |
Photo /
More Info. |
300 AMP: LINCOLN ''CLASSIC III''
Model: SA-300 TM27
Capacity: 300-AMP GENERATOR TYPE DC ARC WELDER
Hours: 2062
Gasoline Engine, 1115v/230v, 3.0 kva, 60 hz
|
|
Ad # 14186 | Portable Welders |
? |
Miller |
MPS 20 AFT |
Good |
sold |
Photo /
More Info. |
20 KVA, 22" Throat: Miller Portable Spot Welder with cooler
Capacity: 20KVA, 22" throat
Electrical: 220/single phase |
|
Ad # 14185 | Spot Welders |
? |
Miller |
MPS 20 AFT |
Good |
sold |
Photo /
More Info. |
20 KVA, 22" Throat: Miller Portable Spot Welder with cooler
Capacity: 20KVA, 22" throat
Electrical: 220/single phase |
|
Ad # 14188 | Portable Welders |
? |
Hobart |
Mega Mig 300 RVS |
Good |
sold |
Photo /
More Info. |
300 AMPS: Hobart Portable Welder with wire feed/spool gun
Model: Mega Mig 300 RVS
Capacity: 300 AMP
Electrical: 220/3 phase |
|
Ad # 14037 | Mig & Tig Arc Welders |
? |
Powcon |
200 SM |
Good |
sold |
Photo /
More Info. |
250 AMP: Powcon Welder with wire feeder
Model: 200 SM
Feeder: Power Drive 1
Capacity: 250 AMP
Manuals included for welder and feeder
Electrical: 220/ 1 phase |
|
Ad # 13992 | Spot Welders |
|
Eisler Engineering Compan |
TBS-6 |
Fair |
sold |
Photo /
More Info. |
12" throat: 380KVA: Spot Welder
Make: Eisler Engineering Company
Electircal: 220/ 1 Phase
Supply: 380KVA
Series A
Type: TBS -6 |
|
Ad # 13987 | Portable Welders |
? |
Miller |
Thunderbolt AC/DC |
Good |
sold |
Photo /
More Info. |
AC/DC 230 Volts, 45.5 Amp.: Miller Portable Welder AC/DC
Model: Thunderbolt
230 Volts
1 Phase
45.5 amps. |
|
We found 7 matching ads. Now displaying the remaining 7 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15379 | Hydraulic H-Frame Press |
1989 |
Carolina Tool & Equipment |
CBP 1200 |
Good |
sold |
Photo /
More Info. |
50 Ton: Hydraulic H-Frame Press
Make: Carolina Tool & Equipment
Model: CBP 1200
Capacity: 50 Ton
Electrical: 110/1 phase
Table Range: 1" to 40"
30" Wide Bed
|
|
Ad # 14231 | Slitters |
? |
Wilder Machinery |
Workhorse 1624 |
|
SOLD |
Photo /
More Info. |
16 Gauge mild steel x 24": Wilder Workhorse Slitter
Model: 1624
Capacity: 16 Gauge
Throat: 24"
Maxium Slitting Width: 24.25"
Minimum Slitting Width: 1.25"
Motor: 3/4 HP
Electrical: 115v/single phase |
|
Ad # 13994 | Slitters |
2004 |
Tin Knocker |
1624 |
Excellent |
sold |
Photo /
More Info. |
16 Gauge x 24.25": Tin Knocker Slitter
Model: 1624
Capacity: 16 Gauge
Throat: 24"
Maxium Slitting Width: 24.25"
Minimum Slitting Width: 1.25"
Motor: 3/4 HP
Electrical: 115v/single phase
Nice machine with less than 20hrs.
Adjustable feet added for use on unlevel
ground.
Owner's manual included. |
|
Ad # 13931 | OBI Presses |
1960's ? |
Niagra |
A3 |
Fair |
sold |
Photo /
More Info. |
45 Ton: Niagra OBI Punch Press
Model: A3
Capacity: 45 ton
Stroke... 4"
Slide Adjustment...2 1/4"
Shut Height... 12 1/4"
Bed Size (L-R,F-B)...28" x 18"
Ram Size (L-R,F-B)... 11 3/4" x 13 3/4"
Throat..10 1/4"
Opening Thru Back..13 1/2"
Strokes Per Minute..100
|
|
Ad # 13935 | OBI Presses |
1950's ? |
Federal |
No.3 |
Fair |
sold |
Photo /
More Info. |
32 Ton: Federal OBI Punch Press
Model: No.3
Capacity: 32 Ton
Stroke: 2-1/2"
Slide adjustment: 2"
Shut height S.D.A.U.: 9-1/4" to top of bed
Area of bed: 21" L-R x 12" F-B
Bolster thickness: 1-3/4"
Area of slide: 8" L-R x 8" F-B
Shank hole diameter: 1-3/4"
Throat depth: 7"
Opening through back: 10-3/4"
Floor to top of bed: 33"
|
|
Ad # 13924 | Slitters |
- |
Wilder Workhorse |
LD 2051 |
Good |
sold |
Photo /
More Info. |
20 Gauge Mild Steel: Wilder Slitter
Model: Workhorse LD2051
Capacity: 20 Gauge Mild Steel, 43 Ft./Min
Electrical: 110/single phase
Note: Machine available upon arrival of
replacement. |
|
Ad # 13865 | Hydraulic C-Frame Press |
1980's |
Haeger |
HP6-B |
Good |
sold |
Photo /
More Info. |
6 Ton: Haeger Insertion Press
Capacity: 6 ton
Electrical: 230 / 3 phase
THROAT DEPTH . 18Inch
RAM ADJUSTMENT . 3/8Inch - 8-1/2Inch
MAX. ADJUSTABLE STROKE TO . 8-1/2Inch
MAX. WORKABLE TOOL DEPTH TO . 12Inch
RAM PRESSURE . 200-12,000 POUNDS
MOTOR . 1-1/2 HP / 480V / 3 PH
WEIGHT . 1,000 LBS.
Tooling included |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14237 | Plasma |
|
Longevity |
Forcecut 80i |
Good |
sold |
Photo /
More Info. |
4' x 8' : Longevity Plasma Cutting System
Model: Force Cut 80i
Capacity: 4' x 8'
CNC Plasma cutting table complete turn key
includes PC controller and Longevity Force Cut 80I
plasma with Proma THC. With full licensed Mach 3
software put it in your shop and load TAP cutting
files a start cutting. The PC controller is an all
in one box housing the PC , drivers, and power
supplies TAP files are loaded via a USB stick.
This is a well built welded table each slider has
10 sealed ball bearings fully functional limit
switches and floating head assembly for the torch
mount. The force cut 80I has 2 torches Trafimet P
81 machine torch with 25' lead and AG-60. Spare
tips and electrodes for both torches come with the
table. Also tutorials for SheetCam and Inkscape on
CDs to help you get started. The table overall
dimensions a re 9' 3" X 6' 6"
|
|
Ad # 14215 | Plasma |
1998 |
MG Systems/Welding |
Hypertherm 2000 |
Fair |
sold |
Photo /
More Info. |
2" Thick, Was cutting on 20ft x 45ft table: MG Systems Plasma Cutting System
Model: Hypertherm 2000
Capacity: 2" thickness, was cutting on 20ft.x
45ft. table
Electrical: 460/3
Maximum OCV (U0) ......280 VDC
Output Current (I2) ...40 to 200 amps
Output Voltage (U2) ...150 VDC
Maximum current at 100% duty cycle...200 amps
Note: This is the cutting system only. Water
table not included. A new system was
purchased
and the original table was kept.
Includes:
A set of 50ft. rails
Owner's manuals
Cutting system was disassembled for loading.
|
|
Ad # 14199 | Plasma |
? |
Lockformer |
Vulcan 1800 |
Fair |
sold |
Photo /
More Info. |
10' x 5' Hypertherm Powermax 900: Lockformer Plasma Cutter
Model: Vulcan 1800
Bed Size: 5' x 10'
Controller: Micropath Plus
Electrical: 230/3Phase
Additional Information:
Hypertherm Powermax 900
Computer and Programs included
Burn table has been disassembled for loading. |
|
Ad # 14172 | Plasma |
10/2008 |
Burlington Automation |
Python X |
Excellent |
sold |
Photo /
More Info. |
60 Ft. In feed & Pierce up to 1.5" thick: Burlington Automation Python X Robotic Plasma
60 Ft. In feed & Pierce up to 1.5" thick
Cutting System
Torch Model: HPR
260
Will Fabricate:
Beams
Channels
Angle Iron
HSS Square and
Rectangular
Tubes
Flat Bar and Strip
Plate
Grating
What is does:
-High Quality Bolt Holes Approved
For Structural Joints By AISC, CISC And
Other Institutions
-Unlimited Bolt Hole Size -
No Tool Changeover Between Hole Sizes
-Copes With Computer
Numerical Control(CNC) Machine Accuracy
-Cut To Length Up To 6 Times
Faster And Straighter Than A Band Saw
-Miter Cuts With Compound Angles
-Slots For Knife Connections And Bracing In
HSS
-Complete Stair Stringers Including
Layout For Treads,Weld Prep Bevel Angles
-Automatically Cut I-Beams In Half To
Producing T
Beams
-Full Text Scribing & Marking (non
destructive)
-Upper/Lower Case Letters & Numbers
-Layout Marks For Clips And Stiffeners
Along
length of beam
-Center, Top Or Bottom Bolt Hole
Referencing/Justification
Includes:
ABB Robot
Hypotherm Plasma
60Ft. In feed
40ft. Independent Out
feed
Roller Convayors
All steel is
Galvanized
Cooling Package
Wireless Remote
Programs - Versa Fab &
WT
Filtered Dryers
Material Sizes for Processing:
Beam Width 4" (101 mm) 48" (1219mm)
Beam Height4" (101 mm)17" (432mm)
HSS Tube 2" x 2" (50 x 50 mm)
24"x16" Channel Width3" (76 mm)36" (914mm)
Channel Height1.25" (32 mm)4" (101mm)
Angle:3"x3" (76 x 76mm)8"x8"
Strip/Plate Width4" (101 mm)36" (914mm)
Strip/Plate Thickness0.25"(6.3mm)1.25" (32
mm)
run time hrs: less than 3000 as of 3-8-15
very
low
note: complete system pkg w/upgrades: screw
air
comp,isolation transfer, tanks, manifold, ext
infeed table, hot weather protect system with
optional software:angle proccessor, beam
splitting
into t's, tube steel processor, flat bar
processor, infeed takes 67ft beams was $900,000
system when new...
|
|
Ad # 13941 | Plasma |
? |
MG Industries |
? |
Fair |
sold |
Photo /
More Info. |
Table Size: 43' x 12': Plasma Burn Table CNC
Table size: 43' x 12'
We can load, but buyer is responsible for
disassembly. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15385 | Air Compressors, Piston Type |
1989 |
Ingersoll Rand |
T 30 242-5D |
Good |
sold |
Photo /
More Info. |
80 gallon horizontal : Ingersoll Rand
MAXIMUM PRESSURE: 125 PSI
TANK SIZE: 80 GALLON HORIZONTAL
CERTIFICATION: UL/CSA/ASME
MOTOR: 5 HP/ 220/ 2 phase
DIMENSIONS: 67" x 24" x 46"
WEIGHT: 655 LBS |
|
We found 6 matching ads. Now displaying the remaining 6 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13809 | Engine & Machine Shop Equip. |
1980's |
Winona Van Norman |
CG 280 |
Good |
sold |
Photo /
More Info. |
Crank Shaft grinder:79" between chucks: Winona Van Norman Crankshaft Grinder
Model: CG280
Under power
Manual included
Electrical: 230/ 3 phase
10.5 HP
Max. distance between chucks: 79" (2006 mm)
Max. distance between centers: 81" (2057 mm)
Max. swing over table: 22" (558 mm)
Stroke capacity: 10" (254 mm)
Max. grinding wheel diameter: 30" (762 mm)
Tolerance: 0 to one thousandth with cone zero with
steady rest
Includes: 3 grinding wheels with centers(arbors)
Head offset measuring device
3 crankshaft centering fixture
crankshaft journal checking square
wheel face, side and radius dresser
2 self centering chucks 200mm. dia.
1 steady rest
grindwheel hub puller
conic center
The machine is in good working order.
|
|
Ad # 15466 | Engine & Machine Shop Equip. |
? |
Sunnen |
MBB 1290 D |
Good |
sold |
Photo /
More Info. |
Honing Diameter .120" x 6": Precision Horizontal Honing Machine
Make: Sunnen
Model: MBB 1290 D
Capacity: 6"
Electrical: 110/1 phase
Honing Diameter .120" x 6"
Maximum Hone Length 16"
Honing Speeds 300, 450, 650, AND 800
Stroke Speeds 80, 110, 160, 220, 310 STROKES
PER MINUTE
Oil Tank Capacity 12 Gal
Main Motor 1/2 HP
|
|
Ad # 15430 | Engine & Machine Shop Equip. |
?? |
Storm Vulcan |
15A Special |
Good |
sold |
Photo /
More Info. |
60" Between centers: Crankshaft Grinder
Make: Storm Vulcan
Model: 15A Special
Capacity: 60" between centers
Electrical: 220/3 phase
Max. swing over table: 21"
Stroke capacity: 7"
Max. grinding wheel diameter: 24"
Includes:
8 grinding wheels
Arnold Gauge
Steady Rest
Wheel Dresser |
|
Ad # 15418 | Engine & Machine Shop Equip. |
? |
Tobin Arp |
CB 24000 |
Good |
sold |
Photo /
More Info. |
.900 to 2.5": Overhead Cam Bearing
Align Boring Machine
Make: Tobin-Arp
Mode: CB 24000
3 arms included
Capacity: .900 to
2.5 inches
Electrical:
110/single phase
belt change-type
6-speed spindle
air/ hydraulic
infinitely variable
feed rate
control and
combination floor
stand
Minor tooling
included a few cutters |
|
Ad # 15415 | Dynamometers |
2013 |
Dynojet |
224X |
Excellent |
sold |
Photo /
More Info. |
2,000+ HP / Torque and up to 200MPH: Mobile Dynamometer (Drive On/ Drive off dyno)
Make: Dynojet
Model: 224x
Capacity: 2,000+ HP / Torque and up to
200MPH
Electrical: 110/1 phase
The 224x chassis dynamometer is Dynojets
most
versatile and best selling performance
chassis
dynamometer on the market. The 224x
dynamometer
features a 24" knurled, precision balanced
drum, a 2000HP / 2000 FT LBS measurement
capacity and a max speed of 200 MPH.
upgraded to Dynoware RT and WinPep 8
new Fanless i7 PC, UPS
upgraded the receptacles to GFCI
Drum Diameter 24 IN / 61 CM Drum Width 81 IN
/
205 CM
Maximum Axle Weight 3000 LBS / 1361 KG Air
Requirements 100 PSI
Operating Temp Range 32 to 158 F / 0 to 70 C
Timing Accuracy +/-1 Microsecond Drum Speed
Accuracy +/-1/100th MPH RPM Accuracy
+/-1/10th
RPM
Has a generator and very quiet Air Compressor
All of the crowd control chains/stands and
fire
extinguishers go with it as well as the 55
daybright pop-up monitor.
Has ramps for both ends
One end has Air Bag lifts to get low ride
height cars on it.
It is the only one to have quick tie E-Track
for the front wheels so you can get cars on
and
off faster than any other dyno out there.
It has a rubberized no slip spray-lined
surface
the full length dyno deck.
Tent not included.
Delivery included with purchase.
|
|
Ad # 15413 | Engine & Machine Shop Equip. |
1980's |
Winona Van Norman |
CG 280 |
Good |
sold |
Photo /
More Info. |
Crankshaft Grinder: 79" between chucks: Winona Van Norman Crankshaft Grinder
Model: CG280
Under power
Electrical: 230/ 3 phase
10.5 HP
Max.distance between chucks: 79"
(2006mm)
Max.distance between centers:81"
(2057mm)
Max. swing over table: 22" (558 mm)
Stroke capacity: 10" (254 mm)
Max. grinding wheel diameter: 30"(762
mm)
Includes 3 steady rests, extra grinding
wheels as pictured, grinding wheel
sharpener
Also includes a crankshaft straightner that
is not pictured. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14003 | Miscellaneous Inspection Equipment |
|
McGill Airflow |
|
Excellent |
sold |
Photo /
More Info. |
: McGill Airflow
HVAC Testing and Balancing Machine
HP: 1
Electrical: 110v/single phase |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14233 | Shelving & Racking |
|
|
|
|
sold |
Photo /
More Info. |
8 Rack, 10ft tall metal rack for 10'x5' sheet storage: 8 Rack, 10ft tall metal rack for 10'x5' sheet
storage |
|
We found 9 matching ads. Now displaying the remaining 9 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15395 | Cleaning Equipment |
? |
Econoline |
UFE-S108 |
Good |
sold |
Photo /
More Info. |
5 PSI to 120 PSI: Sandblasting Cabinet with Dust Collector
Make: Econoline
Capacity: 5 PSI to 120 PSI
48" x 48" Super flip Top
Electrical: 110/1 phase
Hopper door for easy media changes
Foot Pedal
|
|
Ad # 14451 | Misc. Finishing Equip. |
1984? |
Timesaver |
237-1m |
Good |
SOLD |
Photo /
More Info. |
36" wide: Timersaver Metal Sander
Make: Timesaver
Model: 237-1m
Capacity: 36" belt width
Electrical: 460/3 phase
Dust collector included
Dimensions: 4'x 4'x 5'
Unable to be used in current shop
because the
electrical supply is 230V. |
|
Ad # 14286 | Bead & Shot Blasters |
2002 |
Wheelabrator |
BCP Trublast |
Good |
sold |
Photo /
More Info. |
Work Opening 15" x 15": Wheelabrator Bead and Shot Blaster (4 Wheel)
Model: BCP Trublast
Capacity: Work Opening 15" x 15"
Electrical: 460/ 3 phase
Machine parameters:
Single pass cleaning envelope: 12 wide x
12 high
Work opening: 15 wide x 15 high
Variable speed
Conveyor pass height: 3 above finished
floor
level
Floor space 114 wide x 14-1 long plus
conveyors
Dust collector
Blast wheels 4 ea 15 hp
Abrasive reclaim
Bucket elevator assembly
Abrasive separator
Abrasive storage hopper/ adder
Machine work conveyors: entrance and exit
slave
driven chain and sprocket
Hours: 5028
Purchased in 2002
All Manuals included
There is some shot in the hopper that is
included. Size 390.
|
|
Ad # 15593 | Misc. Finishing Equip. |
2012 |
Timesaver |
Lynx 37 MWT DBB-60 |
Needs Work |
sold |
Photo /
More Info. |
37" wide belt: Timesaver Wet Wide Belt Sander
Model: Lynx 37 MWT DBB-60
Capacity: 37" belts
3 heads - 1 belt, 2 brushes
Electrical: 460/3 phase
60 Abrasive Belt Length
Automatic Abrasive Belt Tracking
0-8 Bed Opening (38 Constant Passline)
15-45 FPM Feed Speed
6 Diameter Contact Drum
6 Diameter Brush
Built-in Coolant Filter and Re-circulation Pump
Air Knife Parts Dryer
was used occasionally (2-3) times a week machine hrs approx 2800 as of 4/1/19
Previous questions answered on unit-below
Why types of material were ran through the machine? ...used for stainless ,aluminium ,titanium..
Are there any service records? ..minimal..just replaced conveyor belt recently
What if any parts have been replaced in the machines lifetime?... a few refurbs
Are there loading capabilities? If not who is responsible for them?...we can load onto flat bed
Is the machine in fair conditions but it needs some work to reach its full potential and run properly, but not worn out..such as work-door latch safety switch,middle station drum has wobble(bearing)may needs replaced on bearings installed on belt shaft or alignment issue? station 3 needs motor repaired or replaced..also main conveyor in feed feed belt has tear and may need replaced depending on application drum has gouge in it and may need replaced but 2 ft part on left ok,1 ft part on right ok..with no finishing marks on part...we didnt need too for our if not replaced ok for about 24" part width ..buttons work but plastic insert is broken on a few of them.
Does the machine function as its supposed to? yes but it will need 5-10k for optimal peak performance and to put in good running condition, possible to work around most issues..
Does the seller warranty the item? no as is where is..no warranty
Does the machine come with any extras? Belts brushed etc..a few spare belts
What type grit belts were used? 80-400 grit used
note:machine sold new for $110,000
|
|
Ad # 15520 | Misc. Finishing Equip. |
? |
Powermatic |
BD31A |
Excellent |
sold |
Photo /
More Info. |
Combination disc/ belt sander, Belt 6"x48" Disc 12": Powermatic Disc/Belt Sander
Model: BD31A
Style (Type)Combination Belt/Disc
Disc Diameter (In.)12
Disc Speed (RPM)2,375
Disc Table Tilt (Deg.)15 Up, 45 Down
Disc Table Size (L x W) (In.)17-1/4 x 9
Sanding Belt Size (L x W) (In.)6 x 48
Belt Speed (RPM)2,410
Belt Table Tilt (Deg.)45 Down
Belt Table Size (L x W) (In.)13-1/4 x 7-1/2
Sanding Arm Locking Positions0/45/90
Dust Collection Minimum CFM Required (CFM)
400
Dust Port Outside Diameter (In.)4
Motor Power (HP)1-1/2
Motor Phase1
Motor Voltage (V.)115/230
Prewired Voltage (V.)115
Wiring RemarksPush Button Switch
Motor Current (Amps)14/7 |
|
Ad # 13934 | Cleaning Equipment |
|
|
|
Good |
sold |
Photo /
More Info. |
: Air Ducts and Piping
Pipe Diameters: 6" 14" 24" |
|
Ad # 13811 | Vibratory Equipment |
1995 |
LS Industries |
7 S |
Good |
sold |
Photo /
More Info. |
7 cu. ft.: LS Industries Shaker
Model: 7 S
Capacity: 7 cu ft.
Manual included
We can load |
|
Ad # 15423 | Cleaning Equipment |
|
Storm Vulcan |
Mark IV |
Good |
sold |
Photo /
More Info. |
50" table x 76" work height: Industrial wash cabinet
Make: Storm Vulcan
Model: Mark IV
Capacity: 50" table x 76" load height
Electrical: 220/3 phase
225 gallon capacity
|
|
Ad # 15417 | Cleaning Equipment |
1980's |
Mart |
CYCLONE 30 HI-PROFILE Retract |
Fair |
sold |
Photo /
More Info. |
30" table x 55" work height: Parts Washer/Rinser
Make: Mart
Model:Cyclone 30 HI Profile Retractable
Turntable
Capacity: 30" table x 55" work height
Electrical: 220/3 phase
100 AMPS
Turntable Diameter: 30 inches
Work Height: 55 inches
Table Load Capacity: 1000 lbs
Heavy Duty Capacity: 1,500 lbs
Reservoir Capacity:130 gallons
Duplex Reservoir: Add 47 gallons
Sludge Capacity:37 gallons
Machine does show signs of cosmetic wear and
tear, but is in good working order. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14000 | Routers |
1971? |
JET |
TWSS-3-3/708399 |
Good |
sold |
Photo /
More Info. |
Tilting Spindle Wood Shaper with Powermatic Feeder: Jet Tilting Spindle Wood Shaper with Powermatic
Feeder
Model: TWSS-3-3
Electrical: 230/ 3 phase
5 HP
Variable Speeds
Tooling: Various profile cutters
Operator's manuals included for spindle
shaper and
feeder
|
|
Ad # 15431 | Sanders |
|
White-Time Saver |
SPD 24 |
Good |
sold |
Photo /
More Info. |
24" belt width: White-Timesaver Speedbelt Sander (wood)
Model: Speedsander SPD 24
Capacity: 24" wide belt
Electrical: 220/3 phase
Machine has been taken out of service. Is
in
good working condition.
|
|
Ad # 15403 | Saws |
2005 |
Omga |
T 2005 OPT 6000 |
Good |
Sold |
Photo /
More Info. |
Non-Ferrous-Max. Piece Thickness 5" Max. piece Width10": Sawing, Up Cut /
Optimizing
non ferrous
Make: Omga
Model: T 2005 OPT
6000
Capacity:
Max. Piece
Thickness5″
Max. piece Width10″
Max. infeed
length13′ 20′
Max. feed Speed400
FPM
Saw blade motor
power7.5 HP
Saw blade
diameter18″ (20″
Optional)
Feed motor power5
HP cc
Cutting Speed0.5
1 sec.
Average number of
cuts30 40 min.
Electrical: 460/ 3
phase
New Zanasi
Controller Box
New computer in box
for cabinent
Printer head
rebuilt in 2016
Owner's Manual
included
Saw was
disassembled because
is was taken out
of production. Was
in good working order
at
the time.
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|