User SearchYour search results (if any) appear below in groups of 75 for each section.
Grinding Machinery
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9150 | Jig Grinders |
|
Moore |
# 3 |
Good |
Sold |
Photo /
More Info. |
Moore # 3 .----20in: # 3 jig grinder
24 x 11 table
20 inch
10 in throat
Std specs for 3G-please verify below
Table Working Surface: 11" x 24"
Table Travels: 18" Longitudinal, 11" Cross
Spindle Housing Vertical Travel: 12-5/8"
Spindle Vertical Travel: 3-5/8"
Spindle to Column Ways: 10"
Spindle to Column Below Ways: 13-1/2"
Table Top to Wheel Collet Adjustable: 2" to 18"
Taper Adjustment of Spindle: Up to 1-1/2 Degrees or 3 Degrees Total
Grinding Capacity: 3/16" to 5" No Extension Up to 8" with Extension
Grinding Hole Diameter Capacity: 1/64" to 3-1/2" and Larger with Special Tooling
Compressed Air Requirement: 100 PSI at 35 CFM, Oil Free Less Than 75% Humidity
Variable Head Rotation Speeds: 4 to 250 RPM
Head Vertical Stroke Speed: 4 to 240 SPM
|
|
Ad # 9149 | Cylindrical Grinders (O.D. & I.D.) |
72? |
Landis |
2R |
Good |
Sold |
Photo /
More Info. |
OD Grinder 14swing x 36 centers: OD grinder
# 2R
14" swing x 36 in center dist
14 " wheel
Swivel/universal head
8" 3 jaw chuck
Std specs below-please verify
Normal work swing 6"-10"
Maximum work swing over table 6 31/32"
Nominal distances between work centers 18"-30"
Maximum work swing and diameter standard machine will grind with full standard wheel on machine with hydraulic infeed strokes 6" - 2" H.I. May be smaller on angular wheelhead machine because of work piece configuration
mimimum diameter wheel to grind zero diameter work on center 15". May be smaller on angular wheelhead machine because of work piece configuration
Coolant tank capacity 19 gallons
Hydraulic tank capacity 19 gallons
WORK CARRIAGE
Traverse speed - inches per minute 2 to 240 all lengths thru 72" 96" 120"
Traverse speed per turn of handwheel slow 0.100" fast 1.000"
Work rest capacity 1/4" to 2 1/2" - 6" 1/4" to 4" - 10"
WHEELHEAD AND WHEELFEED
Grinding wheel size 24" x 2" x 12"
Grinding wheel maximum width 5"
Grinding wheel spindle speeds rpm 1000/1271
Grinding wheel minimum diameter of worn wheel 15". May be larger on angular wheelhead machines because of workpiece configuration
Automatic infeed at table reversal on diameter basic machine 0.0003" to 0.004". Machine with hydraulic infeed 0.0002" to 0.004"
Distance wheel centerline to work centerline hydraulic infeed machine max 18", min. 7 1/2"
Work diameter reduction per revoution of wheelfeed handwheel 0.100"
Work diameter reduction per revolution of fine feed knob basic machine 0.010" hydraulic infeed 0.001"
Maximum hydraulic infeed on diameter for hydraulic infeed machines 0.090"
Rapid infeed stroke for hydraulic infeed machine max 2" min. 1/2"
HEADSTOCK AND FOOTSTOCK
Work centers footstock center movement by #10 jarno levers only
Headstock work speeds rpm dead spindle 94-154-246-400 live spindle 1000-154-240-400
ELECTRIC MOTORS
Wheel drive motor 7 1/2 hp
Wheel spindle lubrication pump motor 1/4 hp
Work drive motor 1/2 hp
|
|
Ad # 9144 | Cylindrical Grinders (O.D. & I.D.) |
87 reman |
Heald |
OG/271 toolroom |
Good |
sold |
Photo /
More Info. |
ID grinder 20 x 20": 20 x 20 capacity
12" 4 jaw chuck
Univ swivel head
speed adj
10 HP0G6606 GRINDERS, INTERNAL
MODEL #271 HEALD INTERNAL GRINDER
EQUIPPED WITH:
Power Draw Bar Wheel Guard Cover For Head
Hydraulic Tank Power Feed On End Table
Feed Box Spindle Motor
Speed Vari=Drive Motor on Work Spindle Coolant Tank
Cash Head Conjugate Sine Bar
CATALOG SPECIFICATIONS: std specs verify
Swing Over Table (Straight Work), Diameter .... 18"
Swing Inside Standard Chuck Guard, Diameter ... 12"
Hole Length Ground, Maximum ................... 5"
Hole Diameter Ground .......................... 1/8" - 5-1/2"
Included Angle Taper, Maximum ................. 60 degree
Grinding Speed ................................ 0 - 20 FPM
Rapid Traverse ................................ 35 FPM
Workhead Speeds ............................... 400, 266, 200, 133 RPM
Floor Space W/Coolant Tank .................... 93" x 85"
Net Weight, Approximate ....................... 7400 lbs.
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9143 | Horizontal and Vertical Hones |
89?? |
Sunnen |
EC-3500 |
Very Good |
Sold |
Photo /
More Info. |
Sunnen Automatic Hone 6.5 in programmable: Used Sunnen Model EC-3500,
Manual Stroking: .060-6.5"
Power Stroking: .060-4"
INTERNAL WORK DIA. RANGE, MANUAL.............. .060" TO 6.5"
INTERNAL WORK DIA. RANGE WITH POWER STROKING.... .060" TO 4"
AUTOMATIC SIZING................................ .125" TO 2"
STROKE LENGTH.................................. .236 T0 6.7"
SPINDLE SPEEDS, ADJUSTABLE IN FINE INCREMENTS. 200-3,000 RPM
STROKE RATE, ADJUSTABLE IN FINE INCREMENTS....... 60-500 SPM
COOLANT CAPACITY ................................ 32 GALLONS
APPROX. MACHINE WEIGHT .......................... 1,875 LBS.
EQUIPPED WITH:
ELECTRONIC CONTROL SYSTEM
AUTO CYCLE FEATURING
AUTO POWER STROKING
STONE SAVER
AUTO SIZING CAPABILITY
AUTO SHUT-OFF
DETACHABLE COOLANT CART
5.5 HP, 3/60/230-460 VOLT SPINDLE DRIVE MOTOR
Automatic Stroking: .125-2"
Stroke Length: .236-6.7"
Spindle Speeds: 200-3000 RPM adjustable in fine increments
5.5 H.P. 3 Phase/60/230-460 Volts
32 Gallon Coolant Tank
Includes manuals & some tooling
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9148 | Hardness Testers |
|
Detroit |
PHL-2 |
Good |
Sold |
Photo /
More Info. |
Brunel-20 inch work height, 9 in throat-long stroke: Detroit PHL-2
20inch work height
Brinell scale
9" throat depth
5000 PSI converted to Brinell
last calibrated on 9-11-07---was due 09-11-08 |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|