|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 72? Make - Landis Model - 2R |
|---|
| FOR SALE: Ad # 9149 , Year = 72? , Make = Landis , Model = 2R | 
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: OD Grinder 14swing x 36 centers
|
| Ad #
9149 |
| Year:
| 72?
|
| Make:
| Landis
|
| Model:
| 2R
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- OD grinder
# 2R
14" swing x 36 in center dist
14 " wheel
Swivel/universal head
8" 3 jaw chuck
Std specs below-please verify
Normal work swing 6"-10"
Maximum work swing over table 6 31/32"
Nominal distances between work centers 18"-30"
Maximum work swing and diameter standard machine will grind with full standard wheel on machine with hydraulic infeed strokes 6" - 2" H.I. May be smaller on angular wheelhead machine because of work piece configuration
mimimum diameter wheel to grind zero diameter work on center 15". May be smaller on angular wheelhead machine because of work piece configuration
Coolant tank capacity 19 gallons
Hydraulic tank capacity 19 gallons
WORK CARRIAGE
Traverse speed - inches per minute 2 to 240 all lengths thru 72" 96" 120"
Traverse speed per turn of handwheel slow 0.100" fast 1.000"
Work rest capacity 1/4" to 2 1/2" - 6" 1/4" to 4" - 10"
WHEELHEAD AND WHEELFEED
Grinding wheel size 24" x 2" x 12"
Grinding wheel maximum width 5"
Grinding wheel spindle speeds rpm 1000/1271
Grinding wheel minimum diameter of worn wheel 15". May be larger on angular wheelhead machines because of workpiece configuration
Automatic infeed at table reversal on diameter basic machine 0.0003" to 0.004". Machine with hydraulic infeed 0.0002" to 0.004"
Distance wheel centerline to work centerline hydraulic infeed machine max 18", min. 7 1/2"
Work diameter reduction per revoution of wheelfeed handwheel 0.100"
Work diameter reduction per revolution of fine feed knob basic machine 0.010" hydraulic infeed 0.001"
Maximum hydraulic infeed on diameter for hydraulic infeed machines 0.090"
Rapid infeed stroke for hydraulic infeed machine max 2" min. 1/2"
HEADSTOCK AND FOOTSTOCK
Work centers footstock center movement by #10 jarno levers only
Headstock work speeds rpm dead spindle 94-154-246-400 live spindle 1000-154-240-400
ELECTRIC MOTORS
Wheel drive motor 7 1/2 hp
Wheel spindle lubrication pump motor 1/4 hp
Work drive motor 1/2 hp
|
| Electrical Description |
|
|
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
