|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9739 | Turning Center 4 - 10 in. chuck |
| 2006 |
Daewoo |
LYNX 220LC |
Very Good |
Sold |
Photo /
More Info. |
| collet lathe # 3J dead length w/ parts catcher: FEATURES
·20 HP spindle drive
·Large bar capacity
·Part catcher
·High speed spindle
·Heavy duty turret with 8.3” Curvic coupling
·Separate coolant tank
·Fast 0.15 second turret indexing
·One-piece Meehanite cast iron slant bed
·Pre-tensioned X axis ball screw
·Fast 1,417 IPM rapid traverse
·Large 12.6” maximum turning diameter
·65 PSI coolant pump
·Metered piston distributor lubrication
·Way lube separation system
·Electric torque limiters
·Tool setter
·Rigid tapping
·Compact design requires minimal floor space
SPECIFICATIONS
CAPACITY:
Swing over bed 20.1”
Swing over carriage 11.4”
Maximum turning diameter 12.6”
Maximum turning length-Lynx 220A12.7”
--Lynx 220LC20.7”
SPINDLE:Lynx 220ALynx 220CLynx 220LC
Spindle speed (RPM)60-6,00045 - 4,50040-4,000
Spindle noseASA-A2-5ASA-A2-6ASA-A2-6
Draw tube I.D.1.81”2.68”2.68”
Spindle bore diameter2.08”2.99”2.99”
A.C. Spindle Motor (15 minute rating)20 HP20 HP20 HP
Maximum spindle torque (15 minute rating)70 ft.-lbs.102 ft.-lbs.123 ft.-lbs.
BED, SADDLE, & CROSS SLIDE:
X axis travel6.9”
Z axis travel-Lynx 220A and Lynx 220C13.0”
-Lynx 220LC 21.6”
Inclined angle of bed30 degrees
X axis rapid traverse rate1,181 IPM
Z axis rapid traverse rate1,417 IPM
X axis ball screw diameter1.1”
Z axis ball screw diameter1.3”
Maximum X axis feed thrust1,440 lbs.
Maximum Z axis feed thrust1,660 lbs.
X axis repeatability+ 0.00006”
Z axis repeatability+ 0.00008”
TURRET:
Number of tools12
Turning tool shank size1.0”
Boring bar diameter1.5”
Turret index time (next station)0.15 sec.
Tool selectionBi-directional
Curvic coupling diameter8.3”
Turret clamping force8,765 lbs.
Turret index repeatability+ .0005 degree
TAILSTOCK (optional on Lynx 220A and 220C):
Tailstock quill diameter2.6”
Tailstock quill stroke (programmable)3.1”
Maximum tailstock quill thrust / maximum hydraulic pressure810 lbs. / 425 PSI
Tailstock spindle taperMT #4
COOLANT SYSTEM:
Coolant pump pressure65 PSI
Coolant pump motor1.2 HP
Coolant tank capacity (Lynx 220 / 220L)30 gal. / 32.5 gal.
HYDRAULIC / LUBRICATION:
Hydraulic tank capacity3 gal.
Hydraulic oil required (or equivalent)Mobile DTE 24 or Shell Tellus 32
Way Lubrication tank capacity0.5 gal.
Way Lubrication oil required (or equivalent)Mobile Vactra #2 or Shell Tonna T68
GENERAL:
Floor space – Length X Width (Lynx 220 / Lynx 220L)91” x 63” / 101” x 63”
Machine weight (Lynx 220A / Lynx 220C / Lynx 220LC)6,380 lbs / 6,490 lbs / 7,700 lbs.
Voltage required205 – 235 volt / 3 phase
Power requirement24 KVA (63 amps @ 220 volts)
|
|
| Ad # 11596 | Turning Center 4 - 10 in. chuck |
| 2004 |
Daewoo Puma |
240B |
Very Good |
sold |
Photo /
More Info. |
| 10" chuck: 2004 DAEWOO PUMA 240B
Chuck Size 10"
Max Diameter Bar Capacity 2.6"
Max Swing Over Bed / Carriage 21.7" / 15.4"
Turning Diameter (Max / Std) 13.8" / 8.3"
Distance Between Centers 26.3"
Max Machining Length 21.6"
Main Motor 25 / 20 HP AC
Tools 12
Spindle Speed 50 - 4500 RPM
Spindle Bore 2.99"
Spindle Nose A2-6
Spindle Torque 227 ft. lbs.
Rapid Traverse Rates (X / Z) 945 / 1200 IPM
X-Axis Travel 9.5"
Z-Axis Travel 22.8"
Turret Index (Single Step) 0.1 Seconds
Tailstock Taper MT #4
Machine Dimensions (L x W x H) 126.4" x 62.7" x 68.5"
Machine Weight 9470 lbs.
FEATURES:
FANUC 0iTB CNC CONTROL
10.4" Color LCD
8" Samchully H-08 3-Jaw Hydraulic Chuck
Programmable Tailstock Body & Quill
Automatic Tool Presetter
Servo Driven Turret
Turbo Chip Conveyor
Auto Parts Catcher
Slant Bed Box Way Construction
(4) Boring Bar Holders
(3) OD Wedge Blocks
Mfg Date November 2004
|
|
| Ad # 11598 | Turning Center 4 - 10 in. chuck |
| 2002 |
Daewoo |
Lynx 210LC |
Very Good |
Sold |
Photo /
More Info. |
| 8.25" chuck: 2002 DAEWOO LYNX 210LC
Chuck Size 8.25"
Max Diameter Bar Capacity 2.5"
Max Swing Over Bed / Carriage 20.1" / 13.7""
Max Turning Diameter 11"
Max Turning Length 20"
Tools 12
Spindle Motor 15 / 10 HP
Spindle Speed 45 - 4500 RPM
Spindle Bore 2.9"
Spindle Nose A2-5
Rapid Traverse Rates (X / Z) 630 / 945 IPM
X-Axis Travel 6.2"
Z-Axis Travel 12.9"
Turret Index (Single Step) 0.12 Seconds
Tailstock Taper MT #4
Machine Dimensions (L x W x H) 101" x 63" x 65"
Machine Weight 7700 lbs.
FEATURES:
FANUC 0iT CNC CONTROL
10.4" Color LCD
ATS A6-3J Collet Chuck
Tailstock
Manual Tool Presetter
Turbo Chip Conveyor
Auto Parts Catcher
Box Way Construction
(5) Boring Bar Holders
(5) OD Wedge Blocks
Mfg Date May 2002
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9738 | Vertical Machining Centers (VMC) |
| 2006 |
Daewoo |
DMV-3016L |
Very Good |
sold |
Photo /
More Info. |
| 32 x 16 x 20 travels-12K spindle RPM: FEATURES
* Fanuc Control
* 12,000 RPM spindle-option included
*Powerful 15 hp high torque spindle motor
*Cartridge spindle design
* High precision spindle with two double-row
cylindrical
roller bearings and two angular contact bearings.
* Spindle Air blow (M14)
* Spindle orientation
* Spindle speed override 10 - 150%
* Rigid tapping
Custom Macro B (User Definable)
{ Memory random double arm type (24) ATC
* Portable Manual pulse generatorraw;
* Program and data protection key switch
* Massive One-piece Meehanite cast iron bed
* Wide induction hardened and precision ground box way construction
* Low friction Reulon mating way surfaces
* Servo motors mounted directly to the oversized ballscrews
* Double Pre-tensioned Baliscrews
* Fast 1,181 IPM Rapid Traverse rate
* Metered piston distributor lubrication
Telescopic covers
* Base Flush Chip Disposal
Full enclosure splash guard
* Flood coolant with large separate coolant tank
Work light
* Operator call lamp (red, yellow, green)
Instruction manual, parts list, and electrical drawings
* Fanuc operator and maintenance manuals
SPECFICATIONS -General -verify
CAPACITY:
X axis travel32.2 inches
Y axis travel16.1inches
Z axis travel20.1 inches
Table loading area17.7 x 39.4 inches
Allowable table load1,320 pounds
Table T - slot spacing x width(4)-4.92x.71
SPINDLE:
Spindle nose to table top5.9 to 26,0 inches
Column to spindle center17.7 inches
Spindle taperISO No. 40
Spindle speed8,000 RPM
AC spindle motor (30 min.)15 HP
Spindle torque (30 min.)102 ft-lbs.
AUTOMATIC TOOL CHANGER:
Number of Tools24
Tool ShankCAT 40
Pull Stud (retention knob supply company #)711-23
Max. Tool Dia.3.5
Max. Tool Length9.8 inches
Max. Tool Weight17.6 lbs.
MOTION:
X and Y axis rapid traverse rate1,151IPM
Z axis rapid traverse rate708 IPM
Cutting feed rate04- 315 IPM
Least command increment0001"
" Positioning accuracy+/-,00020" (full stroke)
Repeatability+/-.00008"
GENERAL:
Floor Space Required (W x D)117" x 94"
Machine Weight11,000 lbs.
Voltage required - Fanuc205-235 Volts / 3 Phase
Power required35 KVA
|
|
| Ad # 11597 | Vertical Machining Centers (VMC) |
| 2001 |
Daewoo |
DMV-3016 |
Very Good |
sold |
Photo /
More Info. |
| travels: 32 x 16 x 20: 2001 DAEWOO DMV-3016
Travel: X-Axis 32.2"
Y-Axis 16.1"
Z-Axis 20.1"
Table Size 39.3" x 16.7"
Spindle Speed 12,000 RPM
Spindle Taper Cat 40
Spindle Nose to Table Top 5.9" - 26"
Spindle Motor 15 HP
Tools 24
Table Load Capacity 1320 lbs.
Rapid Traverse Rates (X & Y / Z) 945 / 708 IPM
Max Tool Diameter 3.54" / 5.9"
Max Tool Length 9.8"
Max Tool Weight 17.6 lbs.
Machine Dimensions (L x W x H) 116" x 94" x 108"
Machine Weight 12,100 lbs.
FEATURES:
FANUC 0i-MB CNC CONTROL
10.4" Color LCD
Graphic Display
Rigid Tapping
Inch / Metric Conversion
Helical Interpolation
(24) Position Side Mount Tool Changer
Coolant Thru Spindle (290 psi CoolJet)
Remote Manual Pulse Generator
Turbo Chip Conveyor
12,000 RPM Spindle Speed
Spindle Chiller Unit
Indexer Interface
Three Color Tower Light
Heavy Duty Box Way Construction
Mfg Date May 2001
|
|
| Ad # 11590 | Vertical Machining Centers (VMC) |
| 2002 |
Daewoo |
DMV-3016 |
Very Good |
sold |
Photo /
More Info. |
| 32 x 16 x 20: 2002 DAEWOO DMV-3016
Travel: X-Axis 32.2"
Y-Axis 16.1"
Z-Axis 20.1"
Table Size 39.3" x 16.7"
Spindle Speed 8000 RPM
Spindle Taper Cat 40
Spindle Nose to Table Top 5.9" - 26"
Spindle Motor 15 HP
Spindle Torque 103.4 ft. lbs.
Tools 24
Table Load Capacity 1320 lbs.
Rapid Traverse Rates (X & Y / Z) 945 / 708 IPM
Max Tool Diameter 3.54" / 5.9"
Max Tool Length 9.8"
Max Tool Weight 17.6 lbs.
Machine Dimensions (L x W x H) 116" x 94" x 108"
Machine Weight 12,100 lbs.
FEATURES:
FANUC 0i-MB CNC CONTROL
10.4" Color LCD
Graphic Display
Rigid Tapping
Inch / Metric Conversion
Helical Interpolation
Background Editing
Coolant Thru Spindle (290 psi CoolJet)
24 Position Side Mount Tool Changer
Remote Manual Pulse Generator
Turbo Chip Conveyor
Three Color Tower Light
Heavy Duty Box Way Construction
|
|
| Ad # 8958 | Horizontal Machining Centers (HMC) |
| 7/2005 |
Daewoo/Doosan |
DHP 5000 |
Excellent |
Sold |
Photo /
More Info. |
| 19.7 in pallet ,travels 33.4 X, 27.6-Y, 29.5- Z: travels: 33.4 in X, 27.6 in Y, 29.5 in Z
pallet size-19.7 x 19.7 (2)
load 1100 lbs
max swing of part 31.5 dia x 36.6 height
index -1 degree
rotart pallet shuttle-change time 8 sec
spindlke iso 40 big plus type
14,000 RPM spindle speed
30 HP
60 tools changer
2,362 IPM rapids
accuracy +- 0.00020 repatabilty 0.00008
ridged tapping
Control Fanuc 18iM
spindle taper air blow
thru spindle coolant 1000PSi
includes- tombstomnes & 8 kurt vises
power on time-5404hrs, cutting time-1704hrs operation time-2659 hrs
t-sloted table
max tool dia-2.95 in
max tool dia w/ adj pocket empty-5.5 in
max tool length-15.7 in
max tool weight-22,21 lbs
max spindle torque-139 ft-lbs
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11600 | Knee Mills (Bridgeport Type) |
| 1980 ? |
Hartford |
— |
Good |
sold |
Photo /
More Info. |
| 9 x 42 table: Hartford manual Knee mill
9 x 42 table
step pulley head
2 axis mits dro--needs scale cleaned on one axis
kurt D675 vise
drill chuck
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11595 | Fully Automatic Horizontal Band Saw |
| 2004 |
Do-All |
C-330NC |
Very Good |
sold |
Photo /
More Info. |
| 13" round fully automatic shuttle feed: 2004 DO-ALL C-330NC
AUTOMATIC CUTOFF SAW
Capacity (Round) 13"
Capacity (Rectangle) 13" x 13"
Blade Size 1" x 166"
Blade Speed 50 - 400 FPM
Electric 208-230V
Power 19.4 amps
Weight 3800 lbs.
FEATURES:
Dual Column Production Band Saw
(11) Programmable Speeds
10 ft. Roller Conveyor
Mfg Date January 2004
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11599 | Surface Grinders |
| 1981 |
Okomoto |
PFG-450 |
Good |
sold |
Photo /
More Info. |
| Hyd Long feed 6 x 18: 1981 OKAMOTO PFG-450
HYDRAULIC SURFACE GRINDER
Grinding Capacity (W x L) 6" x 18"
Wheel Size 7" Dia. x 0.5" Thick
Table Size 8" x 20"
Distance Under Wheel 12"
Cross Travel 7"
X-Axis Travel 18.7"
Y-Axis Travel 0.4" to 66' FPM
Table Feed Rate 0.4" - 792 IPM
Auto Cross Feed Increment 0 to 0.250"
Cross Feed Handwheel Grad. 0.001"
Wheelhead Graduations (Coarse/Fine) .0004 / .0001
Grinding Wheel Speed 8000 RPM
Hydraulic Pump Motor 1 HP
Weight 3000 lbs.
FEATURES:
Hydraulic Longitudinal Feed
Power Electric Cross Feed (Continuous & Incremental)
Manual Downfeed of the Grinding Wheelhead, Dual Vertical Feed Mechanism (Coarse & Fine Selections)
Saddle Locking Devise
Walker Magnetic Chuck 6" x 12"
|
|
| Ad # 12569 | Pedestal & Bench Grinders |
| late 90s |
Down draft |
BG3036 |
Good |
sold |
Photo /
More Info. |
| 30" x 36": Down Draft model BG3036
grinding table
250/3phase Volts
30" x 36"
Year late 90s |
|
| Ad # 11397 | Pedestal & Bench Grinders |
| 2005 ? |
Baldor |
A559-343 |
Very Good |
sold |
Photo /
More Info. |
| diamong wheel pedistal tool sharpening : Baldor Tool sharpening pedestal grinder
6" diamond wheels included
1/2 HP
tilt table
light
water cup
very nice unit |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8545 | Crimping, Beading & Flanging Machines |
| 2005 |
Birmingham |
L-20 |
Demo Machine |
Sold |
Photo /
More Info. |
| 20Ga. in 1 inch mtl..: 20 ga. capacity
5/16" width of hammer over edge adj up to 3/8"
25 ft per minute
1 hp
includes stand
optional rolls available- double seam, drive cleat, flange attach, right angle |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12186 | Benders-Pipe and Tube |
| 1997 |
Ercolina |
top bender-050 |
Good |
sold |
Photo /
More Info. |
| 2-1/2" OD: Ercolina- top bender-TB 050
software #RC0063B-T
rotary draw style bender
foor pedal operation
● Bends material to 2½” OD
● Heavy-duty gear case with maximum 11⅞” CLR
● Patented tooling system achieves CLR two times diameter without mandrel
● Low voltage 24V controls
● Operator friendly control panel memorizes bend angle and springback
● Programmable bend angles 0 to 180°
● Adjustable material springback for bend accuracy
● Single bending speed
● Bends to 90° in five seconds
● Remote foot pedal for hands free operation
● Patented swing away vise system and hex mounted tooling increase productivity
● Overload protection controls
● Standard multiple language capability
● Transportation wheels and lift handle built into base cabinet
● Tool free tooling changes with multiple CLR available for each diameter
● Accepts Ercolina® two axis A40/P positioner table
● Comprehensive (1) one-year warranty
Machine Capacities
Material Maximum Maximum
Diameter Thickness
Pipe 2” ID Schedule 40
Mild steel tube 2½” .125
Soft brass 2½” .140
Stainless steel 2½” .065
Welded furniture tube 2½” .125
ST 35 hydraulic steel 2½” .125
304L hydraulic stainless 2½” .095
Hard copper and aluminum 2½” .187
Round solids 1½” --
Rectangular solids ⅜” x 2 ⅜” --
Rectangular tube 1¼” x 2½” .118
Square tube 2½” x 2½” .083
Square solids 1¼” x 1¼” --
Mild steel T 2½” x 2½” .236
Mild steel C channel 2” x 1” .200
All capacities based on mild grade material using machine at low bending speed;
Dimensions and Specifications
Height x Length x Width 30” x 20” x 40”
Bending speed 1.7
Motor 220 volt
Minimum and Maximum CLR ⅜”-15”
Bending angle range 0 to 180◦
Weight 374
Also have manual in digital form-PDF
Includes these tooling dies and formers:
(all for round tubing=1-3/4"-R70, 1-1/4-R87, 1-3/8-R12, 1-1/2-R90, 3/4-R56, 7/8-R67,3/8"-R36, 1/2" R36, 1-1/8" R82, 1-1/2"-R150 |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12187 | Engine & Machine Shop Equip. |
| — |
sunnen |
650 |
Good |
sold |
Photo /
More Info. |
| sunnen rod hone: sunnen 650 rod hone
300/150 rpm
includes: ag300 gage s/n# 21099 |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11603 | Tool Presetters |
| — |
Zoller |
— |
Very Good |
sold |
Photo /
More Info. |
| Zoller cat 40: Zoller Presetter
includes computer & software
complete system |
|
| Ad # 11396 | Coordinate Measuring Machine, (CMM) |
| 2001 |
Faro |
Gold Arm # G08-05 |
Excellent |
sold |
Photo /
More Info. |
| Faro gold -2ft arm table mount: Faro Gold Arm
2ft model
# G08-05 Rev 12
table mount
includes: tool box table , lap top software & roll around mount table, extra probes, rev works software(included) and creative design software(included) that works inside of solid works (not included)-complete pkg ready to go..
2001 FARO GOLD ARM G08-05
Whether measuring new tooling, inspecting a prototype, or reverse engineering a product, FARO has a time and scrap reducing solution for you. FARO's coordinate measurement hardware touches the future of CAM2 (Computer- Aided Manufacturing Measurement) with its “point-and-click” simplicity and portability. From single parts to complex assemblies, the FaroArm offers high precision measurement in any manufacturing environment.
Number of Axes 7
Size 8 ft.
Accuracy +/- 0.41 mm
Construction Titanium
Mfg Date March 2001
FEATURES:
Portable Coordinate Measuring System
Creative Design and Reverse Engineering Software
Portable Tool Box Table with Machined Mounting Plate
Will do training on using arm , if needed |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11601 | Cleaning Equipment |
| 2002 |
Air King |
M40H |
Very Good |
sold |
Photo /
More Info. |
| Air mist/dust collector-2 available: Air King Air Filtration units
used for:welding smoke, oil mist, chemical fumes,
or dust.
SPECIFICATIIONS
model # M-40H
Dimensions: 26"H 48"W 72"L
Weight 440 lbs
Input Power 208/230/460 Volt 3 Phase
Power Consumption 3320 Watts
Maximum Capacity 4000 CFM
Motor 2 H.P. STD
Speed Single Speed
Power Junction Box (Motor starters/discount not
included)
Construction 16 Gauge
Paint Dark blue chemical resistant polyurethane
Noise Level 5', dBA 74 Std
Options M-40 Pressure Gauge: Indicates when to
change filters
Mounting Brackets
Silencer: reduces sound by 6 decibels
3 H.P. 208/230/460 Volt 3 Phase
Washable Aluminum Mesh Pre-filter
The AIR-KING unit has been engineered using high
quality products housed in a 16 Gauge steel
cabinet, finished in a dark blue chemical
resistant polyurethane paint for long unit life.
Each unit is a self-contained system and can be
used individually for smaller operations or in
groups for larger areas. AIR-KING provides
efficient removal of irritating contaminants such
as welding smoke, oil mist, chemical fumes, or
dust.
AIR-KING uses efficient filters which have been
constructed using micro-glass fibers. The filters
are able to separate sub-micron particles from the
air passing through the unit and hold them in high
quantities. Four inch pleated pre-filters catch
the larger particles and extend the bag filters
life. A wide range of different filters are
available for different applications. Filter
efficiencies are rated by ASHRE standards 52- 76.
The M-40V also comes with the option of adding an
additional Wrap-A-Round Pre-filter, that increases
the life of the pleated pre-filter and main bag
filter.
Iowa Distributing Company Inc., has been in the
air cleaning business for over 30 years and has
provided air cleaning systems in thousands of
large and small industrial facilities throughout
the United States and Canada.
APPLICATIONS
• Welding Smoke
• Grinding Dust
• Bondo Dust
• Diesel Smoke
• Oil Mist
• Printing Powder
• Plastic Dust
• Other Smoke/Dust Problems
FEATURES
• Disposable Filters
• Low Operating Cost
• Self-Contained
• Four Way Louvers
• 16 Gauge Cabinet
• Cleaner Air
• Option-Pressure Gauge BENEFITS
• Low Maintenance
• Economical
• Easy to Install
• Easy to Direct Air Flow
• Durability
• Healthier Environment
• Filter Change Indicator
washable Aluminum Mesh Pre-filter
You Can Afford Clean Air
By reducing make-up air requirements up to 80%,
your AIR-KING media air cleaning system could
return your initial equipment cost in a very short
period of operational use. The energy cost savings
alone makes your AIR-KING system an attractive
investment for small operations or for the large
multi-unit installations.
Efficient removal of irritating contaminants such
as smoke, oil mist, chemical fumes, or dust
provides a cleaner, healthier atmosphere for
employees and improves morale as well as
productivity.
Installation of your AIR-KING unit is usually
quite simple. The unit is designed for chain
hanging, rod mounting or a wall bracket
installation. The location of the units and the
design of the airflow system can best be handled
by your sales engineer after an inspection of your
particular area.
How It Works
In the last several years much more efficient
filters have been constructed using micro-glass
fibers. These improved filters are able to
separate sub-micron particles from the air passing
through the unit and hold them in high quantities.
A wide range of different filters are available
for different applications. Filter efficiencies
are rated by ASHRE standards 52-76.
|
|
| Ad # 11602 | Vibratory Equipment |
| 2006 |
Giant |
GB-3 |
Very Good |
sold |
Photo /
More Info. |
| 2 bowl system-3cu ft each: Giant 3 cu ft bowls x 2
2 bowl system rough finishing & Polishing plus fluid disposal system
2-GB-3 vibratory bowls one filled with roughing ceramic grit to knock off burrs other filled with steel shot to polish material
includes below
511 hydrominder unit
55 gal settling tank
urethane screen
heavy duty bowl spiral bowl used for steel media polishing
pump unit
paid over 20 k new for complete system |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
