Year:
| 2006
|
Make:
| Daewoo
|
Model:
| LYNX 220LC
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 7700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- FEATURES
·20 HP spindle drive ·Large bar capacity ·Part catcher ·High speed spindle ·Heavy duty turret with 8.3” Curvic coupling ·Separate coolant tank ·Fast 0.15 second turret indexing ·One-piece Meehanite cast iron slant bed ·Pre-tensioned X axis ball screw ·Fast 1,417 IPM rapid traverse ·Large 12.6” maximum turning diameter ·65 PSI coolant pump ·Metered piston distributor lubrication ·Way lube separation system ·Electric torque limiters ·Tool setter ·Rigid tapping ·Compact design requires minimal floor space
SPECIFICATIONS
CAPACITY: Swing over bed 20.1” Swing over carriage 11.4” Maximum turning diameter 12.6” Maximum turning length-Lynx 220A12.7” --Lynx 220LC20.7”
SPINDLE:Lynx 220ALynx 220CLynx 220LC Spindle speed (RPM)60-6,00045 - 4,50040-4,000 Spindle noseASA-A2-5ASA-A2-6ASA-A2-6 Draw tube I.D.1.81”2.68”2.68” Spindle bore diameter2.08”2.99”2.99” A.C. Spindle Motor (15 minute rating)20 HP20 HP20 HP Maximum spindle torque (15 minute rating)70 ft.-lbs.102 ft.-lbs.123 ft.-lbs.
BED, SADDLE, & CROSS SLIDE: X axis travel6.9” Z axis travel-Lynx 220A and Lynx 220C13.0” -Lynx 220LC 21.6” Inclined angle of bed30 degrees X axis rapid traverse rate1,181 IPM Z axis rapid traverse rate1,417 IPM X axis ball screw diameter1.1” Z axis ball screw diameter1.3” Maximum X axis feed thrust1,440 lbs. Maximum Z axis feed thrust1,660 lbs. X axis repeatability+ 0.00006” Z axis repeatability+ 0.00008”
TURRET: Number of tools12 Turning tool shank size1.0” Boring bar diameter1.5” Turret index time (next station)0.15 sec. Tool selectionBi-directional Curvic coupling diameter8.3” Turret clamping force8,765 lbs. Turret index repeatability+ .0005 degree
TAILSTOCK (optional on Lynx 220A and 220C): Tailstock quill diameter2.6” Tailstock quill stroke (programmable)3.1” Maximum tailstock quill thrust / maximum hydraulic pressure810 lbs. / 425 PSI Tailstock spindle taperMT #4
COOLANT SYSTEM: Coolant pump pressure65 PSI Coolant pump motor1.2 HP Coolant tank capacity (Lynx 220 / 220L)30 gal. / 32.5 gal.
HYDRAULIC / LUBRICATION: Hydraulic tank capacity3 gal. Hydraulic oil required (or equivalent)Mobile DTE 24 or Shell Tellus 32 Way Lubrication tank capacity0.5 gal. Way Lubrication oil required (or equivalent)Mobile Vactra #2 or Shell Tonna T68
GENERAL: Floor space – Length X Width (Lynx 220 / Lynx 220L)91” x 63” / 101” x 63” Machine weight (Lynx 220A / Lynx 220C / Lynx 220LC)6,380 lbs / 6,490 lbs / 7,700 lbs. Voltage required205 – 235 volt / 3 phase Power requirement24 KVA (63 amps @ 220 volts)
|
Electrical Description |
|
|