|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8499 | Turning Center 11 in. & over chuck |
| — |
Warner & Swasey |
M-5940 Universal |
Good |
Sold |
Photo /
More Info. |
| 15in x 46in Warner & Swasey CNC Lathe With 12in Chuck: Control: GE/Fanuc GN 6 Series
Swing 15.723"
Swing Over Ways: 32" (for a distance of 16")
Length: 46in (approx)
8 Station Turret
Chuck: 12" Diameter Buck Chuck
Bar Capacity: 3.9
Spindle Power: 15 hp
Hydraulic "Drag-Along" Tailstock
Hydraulic Quill
Chip conveyor
|
|
| Ad # 8497 | Turning Center 4 - 10 in. chuck |
| 80's? |
Hitachi Seiki |
4NE-600 |
Needs Work |
Sold |
Photo /
More Info. |
| 22in x 24in Hitachi CNC Slant Bed Lathe: Control: Fanuc System 5T
Swing: 22.8"
Length: 24"
Chuck: 10" diameter Buck Chuck
Spindle Bore: 2-7/8" diameter
Spindle Speeds 20 -3150 RPM
Spindle drive: 15 hp
12 Station Turret
RS232 cable wired into cotrol box to program offline! |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8501 | General Purpose Lathe 15in. to 23in. swing |
| Late60's |
LeBlond |
Regal 15x54 |
Good |
Sold |
Photo /
More Info. |
| 15in x 54in Leblond Regal Engine Lathe: Swing over Bed 15-1/2"
Swing over Cross-Slide 9-1/2"
Distance between Centers 54"
Spindle Speeds (12) 30 to 1200 RPM
Spindle Mount L-0 Long Taper
Spindle Bore 1-17/32"
Feeds(Range) (48) .0018 to .104 IPR
Threads(Range-Inch) (48) 4 to 224 TPI
Threads (Range-Metric) None
Tailstock Taper #3 MT
Motor 5HP 480/240V 3Ph 60C 1800RPM
Accessories:
Quick Change "D" Sized Tool Post
12" 3 Jaw Chuck,
12" 4-Jaw Chuck,
18" 4-Jaw Chuck
Steady Rest,
14" Face Plate,
Micro Carriage Stop,
Coolant,
|
|
| Ad # 8500 | General Purpose Lathe 15in. to 23in. swing |
| 70's ? |
LeBlond |
Regal 19x78 |
Good |
Sold |
Photo /
More Info. |
| 19in x 78in Leblond Regal: Swing over Bed & Carriage Wings - 19"
Swing over Cross Slide - 12-1/4"
Distance between Centers - 78"
Spindle Speed(12) - 25-1000 RPM
Spindle Size of Hole - 1-3/4"
Spindle Nose - L-2
Inch Threads(48) - 2-112 tpi
Spindle Motor - 7.5 HP
Equipped with:
Tailstock
Quick Change Tool Post
12" 3-Jaw Chuck
Chip Pan Bed
|
|
| Ad # 8502 | Second Operation |
| — |
South Bend |
2D W |
Good |
Sold |
Photo /
More Info. |
| 8in Chuck South Bend Chucker Lathe with Turret: Swing Over Bed: 16" approx
Chuck: 8" 3-Jaw chuck
Turret: 6 Position
Cross Slide
Spindle Bore: 1"
Inch Threading
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8498 | Vertical Machining Centers (VMC) |
| 80's |
MAZAK |
Micro Center V |
Very Good |
Sold |
Photo /
More Info. |
| 32in x 16in Mazak Micro Center V Vertical Machining Center: Control: Fanuc 6 M
Table: 32" x 16"
Travels:X 30", Y 16", Z 8",
24-Position Automatic Tool changer
Spindle: CAT 40
Tool Changer: 24 Stations
Tool Changer: Dual (swing) Arm
All Boxed Ways
R232 cable wired into control box to program offline.. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8503 | Universal Mills (Horizontal / Vertical) |
| — |
Hardinge |
TM-UM |
Good |
Sold |
Photo /
More Info. |
| Hardinge TM-UM Precision Universal Milling Machine: Table: 6" x 24"
Travels: 8"Y x 18"X x 10"Z (knee)
Spindle Speeds: 100 - 1,850 rpm
Optional Vertical Milling Head |
|
| Ad # 8496 | Planer Mills |
| ? |
Cincinnati |
Hypro 38 x 150 |
Very Good |
Sold |
Photo /
More Info. |
| 38in x 150in Table, Cincinnati Hypro Planer Mill: Dual Column Housing -Planer Mill
Cincinnati Hypro Planer Mill in VERY GOOD condition.
Table Size: 38" x 159"
travels: 150" x 24" on column
42.5" between housing columns
one piece bed
25 HP DC motor W/ controls and 220/3 transformer / machine wired 460/3
side cut heads
Two Heads - independently Operated and fed, with tilt
Two Side Heads: Left and Right
Height under Rail" 40" (?)
Lots of Tool Holders included
Seperate Electrical Cabinet W/ transformer included
All Manuals/drawing ect-Documents included-very complete!
Includes:Hyd. Milling head attachment with power unit.
|
|
| Ad # 8488 | Vertical Boring Mills |
| — |
Cincinnati |
# 3 |
Good |
sold |
Photo /
More Info. |
| # 3: cincinnati # 3 Heavy duty Manual mill
50 taper spindle
table size: 62" x 15"
18-1300 spindle RPM
feeds 1/2-20 IPM17" throat
includes 10" vise
Also includes( 6 )50 taper holders...
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8489 | Multi Spindle Drill Press |
| — |
walker- turner |
— |
Good |
Sold |
Photo /
More Info. |
| 7.5" throat , 1/2" chuck: 4 head manual feed drill units
7.5" throat
8" table to chuck
15" between spindles
1/2" chucks
1/2 HP |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8491 | Power Squaring Shear (Hydraulic) |
| 92 |
Roper Whitney/Betenbender |
8ft x 10Ga |
Very Good |
Sold |
Photo /
More Info. |
| 8ft x 10Ga. 1/8inch: Hydraulic shear
8ft x 10Ga mild steel
solid table top
4 ft squaring arm
36" Hyd. backgage with counter display
General specs from factory-below
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10 Ga.
304 Stainless Steel(At Highest Rake) 10 Ga.
Main Motor (H.P.) .................. 10
Nominal Cutting Length .... 100 inches
Number of Holddowns ............... 15
Knives (Four(4) Cutting ... 100"x1"x3"
Rake of Moving Blade (per ..... 1/4
Back Gauge ....... 36 inches
Strokes Per................. 32
Oil Reservoir (Hydraulic Oil Included). . . . . 42 Gallons
Shipping Weight ............................... 7,000 lbs.
Machine Dimensions:
Overall Height ................. 55 inches
Overall Length ................. 121 inches
Overall Width .................. 74 inches(Including Back-gauge)
Electrical Requirements ................. 230V-28amp/460V-14amp
Recommended Power Line .................. 230V-8ga/460v-12ga
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging.
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments.
POWER RAKE - allows change of blade rake angle for minimum camber & twist.
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and
tipping. Optional urethane gripping pad protects soft and polished materials from marking.
NON-METALLIC GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting.
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts. continued>>>
8' x 125 cont'd -2- Dec. 12, 2007
DRIVE - two hydraulic cylinders pushing or pulling directly on cross-head, no rotating pin action saving on wear.
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump.
STANDARD EQUIPMENT
36" Power Backgauge
Hour Meter
backgage mechanical Readout
48" Squaring Arm With Inlaid Scale
NEMA Electrics
Light Beam/Shadow Line
All Hydraulic Fluid Included
All Steel Construction
American Made Motor Disconnect Switch
Hydraulic Self-Compensating 1” x 3” Knives - (4) Cutting Edges
Holddown Bar Assembly Disconnect Switch
Power Adjust Variable Rake Manual Swing-Up Backgauge
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8492 | Straight Apron Brakes |
| — |
Whitney-Jensen |
48-12 |
Good |
Sold |
Photo /
More Info. |
| 48" x 12Ga. straight brake W/ radius fingers: Extra heavy duty hand brake w/ radius fingers
adj. set back
has 2-3.5" wide fingers & 2-2" wide fingers- 4 total included |
|
| Ad # 8490 | Finger Brakes-Box & Pan Brakes |
| ? |
Chicago |
8187-8 |
Good |
Sold |
Photo /
More Info. |
| Powered-8ft x 3/16. heavy duty-leaf type: powered leaf brake
8ft x 3/16"8" finger extensions
5 hp
Heavy duty powered box & pan leaf brake
control-up,down, inch, clamp, unclamp
Specifications:
Bending Length: 96”
Specs...0-90 deg w/ adj stop cam/switch system
Capacity: 3/16” mild steel (55,000 PSI tensile)
Finger Extension: 8”
Minimum flange on 3/16” material: 1-1/2”
Main Motor: 5 HP
Machine Dimensions: 9’8” long x 8’ wide x 6’4” high
Machine Weight: 7,600 lbs.
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8495 | Misc. Sheetmetal Equip. |
| — |
Greenerd |
# 4 |
Good |
SOLD |
Photo /
More Info. |
| # 4: # 4 ARBOR PRESS
9" THROAT
MOVEABLE LOWER TABLE 12" DIA |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8766 | Misc. Welding Equip. / Acc |
| — |
Acorn |
— |
Very Good |
Sold |
Photo /
More Info. |
| 5 ft x 8 ft..: 5 ft x 8 ft W/ stand |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8493 | Surface Plates |
| — |
Metro lab |
— |
Good |
Sold |
Photo /
More Info. |
| 36 inch x 24 inch grade A: granite table
metal stand
36" x 24"
grade A |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8494 | Forklifts / Lift Trucks (All Types) |
| — |
T150D |
Catapilar |
Very Good |
Sold |
Photo /
More Info. |
| 15 thousand pounds: 15,000Lbs capacity
propane
202" lift max reach
solid tires
no side shift
tilt mast
48" fork length
39" fork width max
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
