User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8580 | CNC & Retrofit Knee / Bed Mills w/o ATC |
90's |
Lagun |
3L Deluxe |
Very Good |
Sold |
Photo /
More Info. |
11 x 54 Deluxe-3 axis cnc w/ manual control: 11 x 54 ?? table
3 axis Anilam 1100M control
Manual or CNC W/ manual quill
30 taper Erickson spindle
33" travel in X , 18 " in Y
4 HP
Power Knee feed
Factory -SPECIFICATIONS
Table Size (in.)
11 x 58 ????
Table T-slot (in./W x No. x Pitch)
5/8 x 3 x 2-1/2
Weight on Table (max./lbs.)
1,500
Table Longitudinal Travel - X-axis,
Manual/with Power Feed (in.) 38/35-1/8
Table Cross Travel - Y-axis (in.) 18
Table Knee Travel - Z-axis (in.) 16-7/8
Ram Travel (in.)
22-3/16
Spindle Taper
NST-40
Quill Diameter (in.)
3-3/8
Quill Travel (in.)
5
Number of Spindle Speeds
Infinite Variable Speed
Range of Spindle Speeds (RPM)
55 - 4,250
Power Quill Feeds (in./rev.)
0.0015, 0.003, 0.006
Head Tilt, Front/Rear ± 45o
Head Swivel, Left/Right ± 90o
Distance Spindle to Table (max./in.) 18
Distance Spindle to Column (min./in.)
5
Distance Spindle to Column (max./in.)
27
Column Turret Diameter, Graduated (in.) 16
Knee Width (in.) 15-3/4
Knee to Column Bearing Length (in.) 19
Saddle and Table Bearing Length (in.) 26
Ram and Turret Bearing Length (in.) 19
Ram Length (in.) 36
Main Motor 4 HP,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Overall Dimensions (in./W x D x H) 73 x 63 x 90
Net Weight (lbs.) 3,800
STANDARD EQUIPMENT
• Hardened and Ground Table Surface and Ways
• Draw Bar
• One-shot Lubrication System
• Complete Flood Coolant System
Made in Spain
• Special high strength gray iron Meehanite® castings with physical and chemical properties providing low clamping capacity, high modulus of elasticity, and excellent wear characteristics
• Head is mounted to heavy duty ram with knuckle joint, for maximum rigidity. Worm gear arrangement provides head tilts ± 45° front to rear and swivels ± 90° left to right for added versatility. Head and ram assembly can be easily rotated a full 360°
• 4 HP Constant, manual variable speed drive, dynamically balanced head with high velocity cooling system
• 55 - 4,250 RPM Infinite variable spindle speed in hi-low ranges for maximum torque and horsepower. Round tooth timing belt for high torque at low speed ranges
• Hard chromed 3-3/8" diameter quill with precision ground rack
• Four Fafnir® P-7 (or Barden® P-7) spindle bearings on super precision NST-40 taper spindle.
• Head mounted with forward-neutral-reverse switch and column mounted coolant on-off switch
• The high tensile strength castings normally have a Brinnell® hardness of 190 to 230HB while hardened surfaces, such as: ways, table top and front, are approximate 480HB, or about Rockwell® 50C scale
• Precision hardened and ground table surface, and with combination box and dovetail design hardened and ground ways
• Rigidity of a bed type mill and capacity of handling 1,500 lbs. maximum heavy work load with unique 3" diameter outboard column support, can be manually clamped
• Convenient front located table and saddle locks. Clamp handles are spring loaded to allow repositioning once locked
• Leadscrews rolled and ground to provide better accuracy and with a high nickel content to improve durability. Adjustable anti-backlash nuts allow for compensation as the machine ages
• Double nut assembly provides backlash adjustment of longitudinal and cross feed screws to eliminate backlash due to wear
• Anti-friction bearings are used throughout the machine
• One-shot central lubrication system provides oil to all sliding surfaces, nuts and leadscrews
• Complete flood coolant system is standard equipment. Pump is located on top of reservoir machine base inside the column
• Standard base chip pan as options
• Voltage required for 220V/440V/3 Phase/60 Hz., prewired 220V
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|