Year:
| 90's
|
Make:
| Lagun
|
Model:
| 3L Deluxe
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 3700
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 11 x 54 ?? table
3 axis Anilam 1100M control Manual or CNC W/ manual quill 30 taper Erickson spindle 33" travel in X , 18 " in Y 4 HP Power Knee feed
Factory -SPECIFICATIONS Table Size (in.) 11 x 58 ???? Table T-slot (in./W x No. x Pitch) 5/8 x 3 x 2-1/2 Weight on Table (max./lbs.) 1,500 Table Longitudinal Travel - X-axis, Manual/with Power Feed (in.) 38/35-1/8 Table Cross Travel - Y-axis (in.) 18 Table Knee Travel - Z-axis (in.) 16-7/8 Ram Travel (in.) 22-3/16 Spindle Taper NST-40 Quill Diameter (in.) 3-3/8 Quill Travel (in.) 5 Number of Spindle Speeds Infinite Variable Speed Range of Spindle Speeds (RPM) 55 - 4,250 Power Quill Feeds (in./rev.) 0.0015, 0.003, 0.006 Head Tilt, Front/Rear ± 45o Head Swivel, Left/Right ± 90o Distance Spindle to Table (max./in.) 18 Distance Spindle to Column (min./in.) 5 Distance Spindle to Column (max./in.) 27 Column Turret Diameter, Graduated (in.) 16 Knee Width (in.) 15-3/4 Knee to Column Bearing Length (in.) 19 Saddle and Table Bearing Length (in.) 26 Ram and Turret Bearing Length (in.) 19 Ram Length (in.) 36 Main Motor 4 HP, 220V/440V/3 Phase/60 Hz., Prewired 220V Overall Dimensions (in./W x D x H) 73 x 63 x 90 Net Weight (lbs.) 3,800 STANDARD EQUIPMENT • Hardened and Ground Table Surface and Ways • Draw Bar • One-shot Lubrication System • Complete Flood Coolant System Made in Spain • Special high strength gray iron Meehanite® castings with physical and chemical properties providing low clamping capacity, high modulus of elasticity, and excellent wear characteristics • Head is mounted to heavy duty ram with knuckle joint, for maximum rigidity. Worm gear arrangement provides head tilts ± 45° front to rear and swivels ± 90° left to right for added versatility. Head and ram assembly can be easily rotated a full 360° • 4 HP Constant, manual variable speed drive, dynamically balanced head with high velocity cooling system • 55 - 4,250 RPM Infinite variable spindle speed in hi-low ranges for maximum torque and horsepower. Round tooth timing belt for high torque at low speed ranges • Hard chromed 3-3/8" diameter quill with precision ground rack • Four Fafnir® P-7 (or Barden® P-7) spindle bearings on super precision NST-40 taper spindle. • Head mounted with forward-neutral-reverse switch and column mounted coolant on-off switch • The high tensile strength castings normally have a Brinnell® hardness of 190 to 230HB while hardened surfaces, such as: ways, table top and front, are approximate 480HB, or about Rockwell® 50C scale • Precision hardened and ground table surface, and with combination box and dovetail design hardened and ground ways • Rigidity of a bed type mill and capacity of handling 1,500 lbs. maximum heavy work load with unique 3" diameter outboard column support, can be manually clamped • Convenient front located table and saddle locks. Clamp handles are spring loaded to allow repositioning once locked • Leadscrews rolled and ground to provide better accuracy and with a high nickel content to improve durability. Adjustable anti-backlash nuts allow for compensation as the machine ages • Double nut assembly provides backlash adjustment of longitudinal and cross feed screws to eliminate backlash due to wear • Anti-friction bearings are used throughout the machine • One-shot central lubrication system provides oil to all sliding surfaces, nuts and leadscrews • Complete flood coolant system is standard equipment. Pump is located on top of reservoir machine base inside the column • Standard base chip pan as options • Voltage required for 220V/440V/3 Phase/60 Hz., prewired 220V
|
Electrical Description |
|
Comments: |
- Nice machine !! ready to go...
Includes approx 20 tool holders ...
|
|