|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Shears
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9059 | Power Squaring Shear (Hydraulic) |
| 86?? |
Wysong |
10-144 |
Good |
Sold |
Photo /
More Info. |
| 12ft x 10GA...(1/8)in: 12ft x 10Ga. (1/8") capacity
36 power back gage
front support arms
solid table top |
|
| Ad # 9058 | Power Squaring Shear (Hydraulic) |
| 2007 |
Betenbender |
16-10 |
Excellent |
Sold |
Photo /
More Info. |
| 16ft x 10ga. (1/8 in )capacity: ** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC SHEAR QUOTE
Model 16-125, 16' x 10ga.(mild steel)
SPECIFICATIONS:
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10ga.
304 Stainless Steel(At Highest Rake) 10ga.Non Production
Main Motor (H.P.) ............................ 15
Nominal Cutting Length ........................ 196 inches
Number of Holddowns ........................... 28
Knives (Four(4) Cutting Edges) ................ 196"x1"x4"
Rake of Moving Blade (per foot) ............... 1/4
Back Gauge Range .............................. 36 inches
Strokes Per Minute ............................ 15
Oil Reservoir (Hydraulic Oil Included). . . . . . . 56 Gallons
Shipping Weight ............................... 20,000 lbs.
Machine Dimensions:
Overall Height ....... 61 inches
Overall Length .... 204 inches
Overall Width .. 76 inches(Including Backgauge)
Electrical Requirements ................. 230V-28amp/460V-14amp
Recommended Power Line .................. 230V-8ga/460v-12ga
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging.
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments.
POWER RAKE - allows change of blade rake angle for minimum camber & twist.
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and
tipping. Optional urethane gripping pad protects soft and polished materials from marking.
ALLOY BRONZE GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting.
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts.
continued>>>
16' x 10ga. cont'd -2-
DRIVE - two hydraulic cylinders pushing or pulling directly on crosshead, no rotating pin action saving on wear.
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump.
STANDARD EQUIPMENT
36" Power Backgauge With Hour Meter
L.E.D. Readout 48" Squaring Arm With Inlaid Scale
NEMA/Square D Electrics Light Beam/Shadow Line
All Hydraulic Fluid Included All Steel Construction
American Made Motor Disconnect Switch
Hydraulic Self-Compensating 1” x 4” Knives - (4) Cutting Edges
Holddown Bar Assembly Disconnect Switch
Power Adjust Variable Rake Manual Swing Up Backgauge
16ft cut length x 10Ga. capacity (1/8")
solid table top
one shot lube
361 run time(power on) hrs on machine, very low actual cut time!
Automec Fully programmable fron power back gage
5 preset programmable power 36 in back gage |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9064 | Press Brakes (Mechanical) |
| — |
Chicago |
253 |
Good |
Sold |
Photo /
More Info. |
| 36 in bed x 18 tons: 36 in bed, 30 in between housings
18 ton
6in throat
no back gage
foot pedal actuation
has hole punch unit with it-uni punch
|
|
| Ad # 9063 | Press Brakes (Hydraulic) |
| 1994 |
LVD |
240/20-PP1 |
Very Good |
Sold |
Photo /
More Info. |
| 20 ft x 240 tons: 20ft bed
200 inches / 16'7" between houisings
12" throat
240 ton
pit required
max capacity: PPI 220/61?? on tag
upper & lower dies
1/2" wide V lower die opening -used for this HVAC sheet metal work
Back gage LVD/Barco # MNC95C not sure if 3 axis, verify ??
floppy drive
Auto leveling system?
dual palm buttonsafety switch- roll around pendent
Currently set in a shallow pit
34"in rear power back gage W/ up/down & in /out control
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9067 | Mig & Tig Arc Welders |
| — |
Miller |
Syncrowave 250 |
— |
Sold |
Photo /
More Info. |
| arc welder power source only: syncrowave 250 power source -no leads |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9069 | Shelving & Racking |
| — |
— |
— |
Very Good |
Sold |
Photo /
More Info. |
| heavy duty racks: approx 12 ft high
2000 lb shelf capacity
67 in total width
2 available |
|
| Ad # 9068 | Forklifts / Lift Trucks (All Types) |
| — |
clark |
GCS15 |
Good |
Sold |
Photo /
More Info. |
| 2700 lb capacity: lp gas
2700 lb capacity max
188" reach
solid tires
4227 hrs
no side shift
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
