We found 6 matching ads. Now displaying the remaining 6 ads.
(Tip: Click on the column headers to sort your results by that criteria)
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15851 | Measuring Hand Tools |
2016 |
tiger stop |
TS-16 |
Good |
sold |
Photo /
More Info. |
16 ft stroke infeed: Tigerstop Model TS16-Purchased new in May 2016 - TBNR16 Work piece
stroke: 16ft overall length 18ft w/ 8ft outfeed table
More often than not, production levels come up short because there isn’t a machine that allows both experienced and inexperienced workers to perform faster. If you need a device that will boost production, you have to get your hands on the TigerStop TS16. The TigerStop T16 is so simple to operate that training new employees is extremely fast. Allot five to ten minutes of training and your new hire will produce rapidly the most precise cuts. When fitted with the optional TigerOptimizer, the TigerStop T16 will be able to figure out the most suitable cut for the length of the wood or metal. This revolutionary option avoids wasting and rework.
- TBNR08 Work piece
- BF Fence
- MVPK
- SAP
Working Length16"
Drive Speedup to 180 fpm
Accuracy+/- 0.004"
Pushing Weight (No Roller Tables)up to 90#
Pushing Weight (Roller Tables)up to 120#
Power Requirement120VAC 8A 60Hz
Drive Type32mm steel-reinforced belt
Motor TypeDC full loop servo with optical encoder
Display Type4x20 LCD |
|
Ad # 12401 | Measuring Hand Tools |
|
Dakota Ultrasonics |
MX-3 |
|
sold |
No Photo /
More Info. |
: Dakota Ultrasonics MX-3 Thickness Gauge
10 Ounces (with batteries)
2.5 W x 4.5 H x 1.24 D
Operating Temperatures: -20 to 120F
Case has extruded aluminum body with nickel-
plated
aluminum end caps (gasket sealed)
Keypad has sealed membrane that is resistant to
both water and petroleum products.
Display is a multi-function 4.5 digit liquid
crystal
display with 0.500 inch numerals, backlit for use
in
poor light conditions.
Backlit is selectable on/off/auto (illuminates
only
when taking a measurement).
Bar graph indicates stability of reading.
Memory - Numeric data storage, 10 files of 100
reading per file
Certification - Factory calibration traceable to
NIST &
MIL-STD-45662A
Warranty - 5 Year Limited.
Measures from 0.025 to 19.999 inches (0.63 to 500
millimeters)
Units - English and Metric
Resolution - 0.001 inches (0.01 Millimeters)
Four readings per second for single point
measurements, or 16 per second in Scan Mode -
captures the minimum thickness. |
|
Ad # 13357 | Measuring Hand Tools |
|
Trimos |
Telm |
Good |
sold |
Photo /
More Info. |
50 millionths resolution ; 40in max length: Nice Trimos Vertical measurement mach. 40 inch max.
HEIDENHAIN READOUT. Being replaced with 60 in.
machine. Came from aircraft ind. 50 millionths
resolution |
|
Ad # 8483 | Measuring Hand Tools |
|
Mitutoyo |
height master 12inch |
Very Good |
sold |
Photo /
More Info. |
12 inch capacity: 12 inch digtal height gage
inch/ metric
digital display
0.0001 resolution |
|
Ad # 12240 | Measuring Hand Tools |
2007 |
Mitsutoyo |
LH600 |
Excellent |
sold |
Photo /
More Info. |
24" max height 600mm: Mitsitoyo LH 600 Height gage
Linear Height Gauge LH-600 High Performance 2D Measurement System, SPC Output, 24kg Mass
0-24" or 600 mm max height
model# 518-331A-21
std. specs below -please verify
Measurement range of 0 to 24 inches (0 to 600 mm), with selectable resolution to 0.000001" (0.0001 mm)
Graphic LCD digital readout with backlighting and keypad provides statistical functions for data analysis
Air-cushion with adjustable height for movement or measurement supports rapid inspection
Motorized drive for ease of vertical probe positioning
Statistical process control (SPC) output to transmit results to a Mitutoyo miniprocessor or computer
The Mitutoyo 518-341A-21 LH-600D linear height gauge is a high-performance 2D measurement system with a measurement range 0 to 24 inches (0 to 600 mm), a backlit, graphic LCD digital readout with keypad, selectable resolution to 0.000001” (0.0001 mm), and statistical functions for data analysis. The unit has data outputs to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC), output to a receipt printer, and input for data entry from a Mitutoyo Digimatic tool.
The gauge is accurate to + or - 0.000043+0.00024L/24” (0.0011+0.006L/6 mm) at 20 degrees C, where L is the range travelled from the base position in inches (mm).
This height gauge has an air-cushion with an adjustable height using a pneumatic floating system for unit movement or measurement. A motorized drive supports even, precise travel on the beam in continuous mode, or in 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, or 40 mm steps, with adjustable speed up to 40 mm per second, while an electrostatic capacitance linear encoder helps prevent overspeed errors which helps ensure repeatable, precise measurement. The 5-mm diameter eccentric electronic touch-signal probe supports precise digital measurement with triggering in both up and down directions. The height gauge supports a measuring force to 1 newton. Mitutoyo guarantees frontal perpendicularity of 6 microns and straightness of 4 microns.
The electronic microprocessor provides advanced program functions that include measuring the height of an upward- or downward-facing surface, the diameter and center of a hole or shaft, the width and center of an inner or outer diameter, the minimum or maximum height of an upward- or downward-facing surface and the distance between them, and the width and center position between two elements. Additionally, the electronic controls provide the ability to set the absolute reference point (ABS), an offset to the ABS, an incremental origin point (INC) at any position, and to switch ABS and INC origin. Functions for 2D measurement include rotation and translation of coordinate axes, coordinate storage, and intersection-angle calculation. The unit may be programmed to compensate for the diameter of the probe tip, to set nominal values for an out-of-tolerance warning, and has a memory capacity for 50 measuring programs and 60,000 measurement data points. A sealed keypad has function keys for operation and alpha-numeric keys for user-entered data. The graphical LCD digital readout has a 320 x 240 dot resolution with an LED backlight, and displays statistical functions and histograms. It can display in English, German, French, Spanish, Italian or Japanese, and can display measurements in inches or metric units.
Output ports transmit results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for SPC, or through alternate RS-232C or USB ports. An output port transmits reports to a receipt printer (not included) or a commercially available A4-size printer. The unit can also store and retrieve results to/from a floppy disk drive (not included). The unit comes with a rechargeable nickel-metal hydride (Ni-MH) battery pack, an AC adapter, a probe diameter calibration block, a clear cover, and a conveyance handle. The height gauge weighs 52.9 lbs (24 kg).
Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds an electronic touch-signal probe to the gauge. On compatible units, the probe may be replaced by a pointer that is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. Height gauges are typically used in manufacturing, machining, and mechanical engineering.
Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
sell new for 8,000 list price |
|
Ad # 12065 | Measuring Hand Tools |
2011 |
Tauring |
Arc Meter |
Excellent |
sold |
Photo /
More Info. |
: TAURING Arc Meter– Excellent Condition
http://www.tauringroupusa.com/specials.php
Bought New: 05/02/11
Paid: $1,499
Includes: Arc Meter and Case
Remarks: Really neat and very accurate tool,
provides inside and outside arc measurements in “
or mm’s, no need for calculations or charts. If you
work with bend radius’s this will save you making
expensive mistakes and pay for itself 10 x over.
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|