Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12266 | Plasma |
|
Thermal Dynamics |
Pak 150 XL |
Good |
sold |
Photo /
More Info. |
1" mild steel max thickness-hand held torch unit: Thermal Dynamics Plasma Cutter
•The Thermal Dynamics Pak Master 150XL offers a range of high performance, genuine cut capacity plasma cutting systems designed to cut most metals up to 1 1/2''''(38mm) using air, nitrogen, or argon/hydrogen as the plasma gas. Uses the PCH/M-120 torch, which is available in either a 70 or 90 hand configuration, or in a 180 machine style with 1 3/8'''' (35mm) diameter mounting tube and 32 pitch rack. Ideal for hand applications and can be used in many mechanized applications.
•THERMAL DYNAMICS
•1 1/2'''' Genuine Cut Capasity (Carbon Steel) 5/8 Pierce Rating Maximum Life Parts SMART LOGIC This circuit prevents damage to the unit should it be connected to high line voltage while it is linked for low voltage. Smart Start Auto Pilot Restart Exclusive Tip Saver Circuit Efficient Inverter Technology
•UNSPC CODE: 23271707
•Torch Model : PCH-120 PCM-120
•PAK MASTER 150XL SYSTEM
|
|
Ad # 7806 | Plasma |
|
Miller |
Spectrum 375 |
Excellent |
SOLD |
Photo /
More Info. |
Portable Miller Spectrum 375 DC Plasma Cutting System: Includes all standard accessories |
|
Ad # 11408 | Plasma |
|
Lockformer |
Vulcan 1000 |
Good |
sold |
Photo /
More Info. |
5ft x 10ft : Lockformer Vulcan Plasma Table
5ft x 10ft |
|
Ad # 10637 | Plasma |
|
Cybermation |
700a |
Very Good |
Sold |
Photo /
More Info. |
5' X 10': Cybermation 700a complete with newer (2007) Hypertherm Pm1000 G3 series pla... |
|
Ad # 14199 | Plasma |
? |
Lockformer |
Vulcan 1800 |
Fair |
sold |
Photo /
More Info. |
10' x 5' Hypertherm Powermax 900: Lockformer Plasma Cutter
Model: Vulcan 1800
Bed Size: 5' x 10'
Controller: Micropath Plus
Electrical: 230/3Phase
Additional Information:
Hypertherm Powermax 900
Computer and Programs included
Burn table has been disassembled for loading. |
|
Ad # 15565 | Plasma |
|
Lockformer |
10' Notcher 10 ga |
Good |
Sold |
Photo /
More Info. |
: Lockformer 10’
Notcher 10 Ga.,
Serial No: 1DE 1899
dim:80" x 27" x 47"
|
|
Ad # 5698 | Plasma |
|
Hypertherm |
10 x 25 |
Very Good |
sold |
Photo /
More Info. |
10' x 25' Plasma Fuel Gas Cutting Table: Cutting Surface: 10' x 25' per Tank
(2) HT 2000 Hypertherm Power Sources
(1) Burny-5 with 540 Servo Pac
(2) Plasma Torches
(2) Fuel Gas Torches
(2) Water Tanks |
|
Ad # 9516 | Plasma |
|
Hypertherm |
Max 200 |
Good |
sold |
Photo /
More Info. |
2" mild steel max, 1" recommended.: Component of Turret Punch System ad #9517
Capacity
Mild Steel
Dross free
Production (pierce)
Severence (edge starts)
25 mm (1")
25 mm (1")
50 mm (2")
Stainless Steel Production (pierce)
Severence (edge starts) 25 mm (1")
50 mm (2")
Aluminum Production (pierce)
Severence (edge starts) 25 mm (1")
50 mm (2")
Speed*
(Mild steel)
Optimum quality 12 mm (1/2")
2159 mm/m
(85 ipm)
Cut angle ISO 9013 range** 4-5
Weldability
Ready to weld
Process gases
by material
(Plasma/shield) Mild steel
Stainless steel
Aluminum
Air/Air, O2/Air,
N2, CO2
Air/Air, N2/Air,
N2/CO2, H35/N2
Air/Air, N2/Air,
N2/CO2, H35/N2
Process amps Not all processes available
for all materials 40-200
beveling (200)
30 ft leads
|
|
Ad # 13941 | Plasma |
? |
MG Industries |
? |
Fair |
sold |
Photo /
More Info. |
Table Size: 43' x 12': Plasma Burn Table CNC
Table size: 43' x 12'
We can load, but buyer is responsible for
disassembly. |
|
Ad # 14237 | Plasma |
|
Longevity |
Forcecut 80i |
Good |
sold |
Photo /
More Info. |
4' x 8' : Longevity Plasma Cutting System
Model: Force Cut 80i
Capacity: 4' x 8'
CNC Plasma cutting table complete turn key
includes PC controller and Longevity Force Cut 80I
plasma with Proma THC. With full licensed Mach 3
software put it in your shop and load TAP cutting
files a start cutting. The PC controller is an all
in one box housing the PC , drivers, and power
supplies TAP files are loaded via a USB stick.
This is a well built welded table each slider has
10 sealed ball bearings fully functional limit
switches and floating head assembly for the torch
mount. The force cut 80I has 2 torches Trafimet P
81 machine torch with 25' lead and AG-60. Spare
tips and electrodes for both torches come with the
table. Also tutorials for SheetCam and Inkscape on
CDs to help you get started. The table overall
dimensions a re 9' 3" X 6' 6"
|
|
Ad # 7888 | Plasma |
|
Koike Aronson |
D80 |
Good |
Sold |
Photo /
More Info. |
200 AMP Koike Aronson D80 Hypertherm HT2000 Plasma Cutter: 40-200 Amp Output
9' x 30' Air Table
2 Axis Hybrid D80 Control
CNC Control needs work
Cutting Capacity of 2" thick mild steel edge start
Pierce Capacity of 1-1/2" thick mild steel
Production Cutting Capacity of 1" thick mild steel piercing
Remote High Frequency Control
Remote Current Control
Gas Console
|
|
Ad # 14109 | Plasma |
|
Hypertherm |
Hyspeed HT2000LHF |
Excellent |
sold |
Photo /
More Info. |
6' x 16', 18 gage to 1-1/2" thick: Hypertherm Plasma HT2000LHF, 6' x 16' Table,
18 gage to 1-1/2" thick capacity
Down Draft System, Computer w/ software -
Everything to you need to cut! Bread and butter
thicknesses to cut are 14 gage material to 1-1/4"
although it can cut thinner than 14 gage and
thicker than 1-1/4". We don't have means of
loading and transporting so keep that in mind. You
should have a professional moving company handle
that. |
|
Ad # 5590 | Plasma |
07' 1979 |
Koiki |
1K5000 |
Good |
sold |
Photo /
More Info. |
18' x 79" Tracer Type Plasma Cutter: Cut Area: approx. 18 ft x 79"
Generator:
L-Tech Type PCM-100 Plasmarc |
|
Ad # 14172 | Plasma |
10/2008 |
Burlington Automation |
Python X |
Excellent |
sold |
Photo /
More Info. |
60 Ft. In feed & Pierce up to 1.5" thick: Burlington Automation Python X Robotic Plasma
60 Ft. In feed & Pierce up to 1.5" thick
Cutting System
Torch Model: HPR
260
Will Fabricate:
Beams
Channels
Angle Iron
HSS Square and
Rectangular
Tubes
Flat Bar and Strip
Plate
Grating
What is does:
-High Quality Bolt Holes Approved
For Structural Joints By AISC, CISC And
Other Institutions
-Unlimited Bolt Hole Size -
No Tool Changeover Between Hole Sizes
-Copes With Computer
Numerical Control(CNC) Machine Accuracy
-Cut To Length Up To 6 Times
Faster And Straighter Than A Band Saw
-Miter Cuts With Compound Angles
-Slots For Knife Connections And Bracing In
HSS
-Complete Stair Stringers Including
Layout For Treads,Weld Prep Bevel Angles
-Automatically Cut I-Beams In Half To
Producing T
Beams
-Full Text Scribing & Marking (non
destructive)
-Upper/Lower Case Letters & Numbers
-Layout Marks For Clips And Stiffeners
Along
length of beam
-Center, Top Or Bottom Bolt Hole
Referencing/Justification
Includes:
ABB Robot
Hypotherm Plasma
60Ft. In feed
40ft. Independent Out
feed
Roller Convayors
All steel is
Galvanized
Cooling Package
Wireless Remote
Programs - Versa Fab &
WT
Filtered Dryers
Material Sizes for Processing:
Beam Width 4" (101 mm) 48" (1219mm)
Beam Height4" (101 mm)17" (432mm)
HSS Tube 2" x 2" (50 x 50 mm)
24"x16" Channel Width3" (76 mm)36" (914mm)
Channel Height1.25" (32 mm)4" (101mm)
Angle:3"x3" (76 x 76mm)8"x8"
Strip/Plate Width4" (101 mm)36" (914mm)
Strip/Plate Thickness0.25"(6.3mm)1.25" (32
mm)
run time hrs: less than 3000 as of 3-8-15
very
low
note: complete system pkg w/upgrades: screw
air
comp,isolation transfer, tanks, manifold, ext
infeed table, hot weather protect system with
optional software:angle proccessor, beam
splitting
into t's, tube steel processor, flat bar
processor, infeed takes 67ft beams was $900,000
system when new...
|
|
Ad # 14705 | Plasma |
10/2012 |
Shengda |
XZQQ-625 |
Good |
sold |
Photo /
More Info. |
stone cutter: saw: bridge cutting saw: Shengda # XZQQ-625 Stone cutting saw
0-45 deg tilt blade blade
80" x 126" wood table
190" total width between housings
blade dia: 625mm or 24"
head travel in /out on side
rails:140"
rpm: 2085
tilting table
wired 220/3 currently
factory specs below:
Bridge cutting machine:
XZQQ-625
Max.working dimensions(LxWxH) Mm
3200x3200x200
Max.diameter of blade Mm 625
Table dimensions(LxW) Mm 3200x2000
Table tilting degree No 0-85
Table rotating degeree No 360
Head tilting degree no 0-45
Main motor power Kw 15
Overall dimensions(LxWxH) mm
6000x5000x2600
This machine is PLC controlled with
cutting
dimensions set by terminal input. All
operation
are executed either manually by the
operator or
automatically by the program carrying
out
parallel cuts with max 8 different
dimensions
repeatable up to 1999 times. The
switchboard,
with operation buttons, programmer and
liquid
crystal display on it, is mounted on
the
right
hand side of the machine. The
switchboard make
operator easily to control the machine
from the
sawing area when the stone is being
positioned.
The saw is equipped with a laser
illumination
system to aid in lining up the cut. The
most
important is the blade holder of
machine
can be
tilting from 0 to 45 degree for
chamfering
cutting. So the machine can be satisfy
for
different special processing request.
The cut
is controlled through an inverter.
|
|
Ad # 7118 | Plasma |
11/97 |
Koike Aronson |
AG 1200JH |
Very Good |
Sold |
Photo /
More Info. |
53" x 125" Koike Aronson Dual Headed Plasma Cutter : Burny 3 CNC Control
Dual Plasma Heads
Cut Table: 53" x 125" x 24" deep
Water Tank
Tracks: 60" w x 158" long, Carrier Track Travel approx 56"
Includes: dual head cutter with optic & programmable control
Full Documents and many spare parts included |
|
Ad # 7726 | Plasma |
87 |
Hobart |
HPW 400 |
Very Good |
Sold |
Photo /
More Info. |
Plasma Arc welder and cutter up to 1" cap.: Requires a DC power supply input. Such as the DC
output from a AC-DC arc welder or similar DC
power supply. It is water cooled for continuous
welds or cuts, it also has built-in flow meters for water,
shield and plasma gases. Arc current is adjustable
with coarse and fine controls. A wide range of operating
input voltages, and is single phase.
|
|
Ad # 14527 | Plasma |
90's? |
AKS |
R1830-HD3070 master-cut |
Good |
sold |
Photo /
More Info. |
72" x 120" cutting area: AKS plasma machine:72" x 120" cutting area
torch: Hypertherm # HD3070
Hypertherm HD-3070 HyDefinition Plasma
Cutting system with Torch Height Control
DUST-HOG model SBD 8-2H
|
|
Ad # 8208 | Plasma |
1970 |
Thermal Arc |
8 x 20, 1200 Amps |
Good |
sold |
Photo /
More Info. |
8ft x 20 ft, 1200 AMPs, 480Volts: Gantry plasma cutter
1200 AMP 480V, 3 phase
3ea - 400 AMP power supplies (Thermal Arc 350),
variable from 100-400 AMPS
Can be used individually or combined, depending
on power requirements.
2ea - Thermal Arc 500 torch heads, w remote
height adjust
8 ft x 20 ft false bottom tank with replaceable
slats
Recirculating refrigerated torch
cooler(refrigerates torch head and input water)
Spare parts, including tips and nozzles
Burny 3 CNC controller(preprogrammed shapes
library, and custom size input)
This will cut from .187 through 4" thick steel
plate.
In use for 10 years at this facility
|
|
Ad # 7314 | Plasma |
1984 |
MG |
|
Excellent |
sold |
Photo /
More Info. |
12’x 24’ MG CNC Plasma/Oxygen track type Burning Machine with table: 12’x 24’ MG CNC Plasma/Oxygen track type Burning Machine with table
Max. burning width 12’
Max. burning length 24’
EQUIPPED WITH:
(1)Oxygen torch with motorized lifter
(1)Plasma torch with motorized lifter
153 x 24’ water table w/ pump system
Burny 3 CNC control with cassette
*Note Machine is less Plasma power supply |
|
Ad # 7649 | Plasma |
1985 |
LINDE |
CM350-9 |
Good |
Sold |
Photo /
More Info. |
LINDE PLASMA/FLAME CUTTING SYSTEM: LINDE PLASMA/FLAME CUTTING SYSTEM
AREA OF WATER TABLE ................... 114´´ X 108´´
CENTER DISTANCE BETWEEN RAIL .......... 11'4´´
CUTTING WIDTH ......................... 111´´
CONTROL MODEL ......................... LINDE #UCNC-8
WATER TABLE MFG ......................ANDERSON ENGINEERING
NUMBER OF LINDE PLASMA UNITS: ......... 2
TYPE .................................. 200-3
P/N ................................... #677740
SERIAL ................................ #X85C-14687 & #F85K-50166
PLASMA CONTROL ........................ #PCC-8
LINDE POWER SUPPLIES .................. 2
TYPE .................................. PLASMARC #PHC-601
P/N ................................... #677330
SERIAL ................................ #F85K-50165
INPUT ................................. 380/415/460 VOLT - 50/60 CYCLE
OUTPUT ................................ 420 VCU MAX. - 250 VOLT - 600 AMP |
|
Ad # 8999 | Plasma |
1989 |
Vulcan |
1800 |
Very Good |
sold |
Photo /
More Info. |
5X10' 3/8" MS: This machine is in Very Good condition. It is
ideal for a sheet metal shop HVAC or other. Max
traverse speed 650ipm. This machine was rebuilt
by AP and used for 1 1/2 years. After complete
overhaul the machine was installed in March 07.
The machine is up for sale as the previous
buyer is going out of business and has no
further need for the machine. The plasma is a
40A HT40c with a cutting capacity of 3/8". The
table has a 5X10 cutting area. Machine is
equipped with a floating head using a pneumatic
lifter. At this time the machine is in storage.
This machine may be sold AS-IS or setup to your
cutting specifications with new higher
capacity torch, height control and more.
Ask about adding a new PM2000 CAM software
package with full HVAC fitting library.
|
|
Ad # 10402 | Plasma |
1991 |
cybermation |
cyb2200 |
Good |
Sold |
Photo /
More Info. |
84 x 240: table size 84"x240" works good. it is disassembled and in storage right now... |
|
Ad # 13677 | Plasma |
1993 |
L-teck/esab |
CM300/8 |
Fair |
sold |
Photo /
More Info. |
Plasma & oxy fuel: 9 x 12' cut area: 1993 L-teck/Esab plasma/oxy cutting system
300 amp power supply #esp-300
new Esab vision controller upgraded in 2005
2 oxy fuel heads w/p36 torch can mirror or
std cuting
max cutting area: 9ft x 12ft
stand alone cooler for torch
collission detecton
2 flow control boxes PEC91
no water table-verfy?
note:We are unable to find the manual for the
machine. The cabling is in usable condition, as
to be expected for a machine that has been offline
for 2 years. The LTEC is able to be networked and
uses Columbus nesting software not included.The
power supply is with the LTEC machine. also came
across the manuals, including schematics, for the
LTEC
Note:buyer needs to be aware that with the 9x12
table it will be an oversized load
NOTE:machine has been dissasembled and taken out
of service for 2 years now but ran fine before
removed
|
|
Ad # 7768 | Plasma |
1994 |
Burny 3 |
|
Very Good |
SOLD |
Photo /
More Info. |
: Burny 3 Control - Perfect for CNC plasma, conventional flame, routing, etc.... |
|
Ad # 7110 | Plasma |
1994 |
Hypertherm |
HT-400 |
Fair |
Sold |
Photo /
More Info. |
400 Amp Power Source, 12' Gantry, 20' of Rails: CNC Plasma Cutting Machine - 12' Gantry (Heath GXA Shape Cutter) with a Bur... |
|
Ad # 10623 | Plasma |
1995 |
MG Industry |
MMIA |
Very Good |
sold |
Photo /
More Info. |
6' x 20' table, cuts up to 3/4" steel: The Plasma Cutter was up graded from a 1070 Hypertherm control-70 watts to ... |
|
Ad # 10691 | Plasma |
1995 |
KOIKE ARONSON |
IK-1200JH |
Excellent |
sold |
Photo /
More Info. |
4X10 table-oxy fuel: KOIKE ARONSON IK-1200JH
4X10 CUTTING AREA
BURNY 2.5 CNC CONTROL W/ MODEM-RS232
no plasma torch(is set up for it (plasma)
but has 2 oxy fuel torches included w manual height control)
BURNY FILE SERVER SOFTWARE W/ DONGLE
HYPERTHERM TORCH HEIGHT CONTROL on plasma
2 OXY FUEL STATIONS
LINATROL TRACING UNIT
NO PLASMA UNIT INCLUDED |
|
Ad # 7876 | Plasma |
1997/8 |
KOMATSU |
RAZOR |
Very Good |
SOLD |
Photo /
More Info. |
4' x 8', 40 Amp Komatsu RAZOR Fine Plasma Cutting MAchine: Cutting Area: 4' x 8'
Generator Output: 40 Amp
Plasma Unit: Type JU 1201, Fine Plasma unit G-940-II
System Model: KPG940-B2
Gas Cooling Unit
Cutting Capacity - (General and Depending upon cutting speed):
1/4" in Mild Steel
7 ga in Stainless Steel
14 ga in Aluminum
All original documents - Programming, operational, maintenance, parts etc
|
|
Ad # 5594 | Plasma |
1997 |
KOIKE |
MN 1500 |
Excellent |
SOLD |
Photo /
More Info. |
3/8" Steel:KOIKE # MN1500 CNC Plasma Cutting Machine: KOIKE model# MN-1500.
Excellent condition. Only used to cut aluminum.
Capacity up to 3/8" steel x (60" x 240")table. Includes water table, all manuals and some spare parts.
Hypertherm Cutting System: 20-50 AMP Adjustable
50 Shape Library:, inch/metric, auto or manual test run, display, Auto acell/ decel on corners, test run mode, single step mode, built in diagnostics, 128K part storage, scaling, auuto part alignment, mirror image, program rotation in .01" increments, RS-232/422 communications. |
|
Ad # 8928 | Plasma |
1997 |
Messer-MG |
MPMM |
Good |
sold |
Photo /
More Info. |
Max cutting width 8' max cutting length 12': Maximum Cutting Width 8'
Maximum Cutting Length 12'
Center to Center Machine Rails
Equipped With Burny 5E CNC Controls (Left Hand
Mounted)
9" High Resolution Color Graphic Display
3 1/2" Floppy Drive
Standard Shape Library
Infinately Variable Speed Drives
Hypertherm HD3070 Hydefinition 100 AMP Plasma
Power
Torch Interface
Interlogic RSVP 401 HD Torch Lifter
Cutting Range 0.048" to 2" with Oxygen
Quickstop Torch Collision Protection Pneumatic
Drill
Maximum Capacity1/2" Diameter Hole on 1" Plate
Pneumatic Drill
Marks and Scribes Lines on Material CMC/Burny
M:12630-141AF High Volt
High Torque Drives Zephyr Zoned Downdraft Table
With Central Duct Amp.
Heavy Duty 115Lb /Foot Crane Rail
Rack and Pinion Drives in Both Axis'
Gas Regulators
Many Spare Parts
Power Trak in Longitudinal Axis
Type 22R Hose and Cable Carrier System
Gas Required Oxy Fuel Natural
Plasma Gas Oxygen
Shield Gas Clean Dry Air
Nitrogen Required for Pre Flow
Electrical Requirements: Machine 115V/1PH/60HZ
Plasma Source 440V/3PH/60HZ
|
|
Ad # 14523 | Plasma |
1997 |
Komatsu |
KCR-095 |
Good |
sold |
Photo /
More Info. |
120" x 60" Sheet: Komatsu KCR-095 plasma cutter
120" x 60" Sheet
Mild Steel Thickness Capacity: .750"
Rated Output: 120 AMP
X Axis Travel: 3073mm (121")
Y Axis Travel: 1549mm (61")
Z Axis Travel: 200mm (7.9")
X & Y Axis Rapids: 400 IPM
Z Axis Rapids: 500 IPM
Equipped with: Komatsu Programmable Control
Komatsu Model G9120 II Fine Plasma Unit |
|
Ad # 14335 | Plasma |
1997 |
Komatsu |
Rasor Rev II |
Good |
Sold |
Photo /
More Info. |
6ft x 12ft: Komatsu Rasor Rev II
1997
Komatsu Fine Plasma Cutter G990-II
6ft x 14ft
Fume Extractor
Rasor Rev II Control
220 voltage
Cutting capacities include mild steel up to 1"
(25.4 mm), aluminum up to 3/4" (19 mm) and
stainless up to 3/4" (19 mm).
rapid traverse speed capable of 1200 inches per
minute,
an open table design to accommodate deep parts
interface capability with third party CAD/CAM
systems.
http://www.komatsuplasma.com/kai/ctd/en/rasorre
v/pdf/rasorrev.pdf |
|
Ad # 7492 | Plasma |
1997 |
M.G. |
MPC-2010 |
Very Good |
Sold |
Photo /
More Info. |
1997 M.G. MPC-2010 Multi-Process CNC Cutting Machine: 10' x 24' M.G. Multi-Process CNC Cutting Machine
Full Machine Specifications
Burny 5 CNC Control
Maximum Cutting Width 120"
Maximum Cutting Table Width 136"
Maximum Cutting Length 288"
Rail Center 156"
Max. Cutting Capacity (Hy-Def Plasma) 1/2"
Max. Cutting Capacity (HT-2000) 1"
Maximum Positioning Speeds 600 IPM
Equipped With:
Burny 5 CNC Controlw/ 14" Color CRT
(1) Hypertherm HD3070 70 Amp. Hy-Definition Plasma
(1) Hypertherm HT2000 200 Amp. Plasma System
Rhapsody Mdl. RSVP401 Torch Height Control
Programmable Air Scribe Marker
Pneumatic Drill Head, Max. 1/2" Hole in 1" MS Steel |
|
Ad # 12655 | Plasma |
1998 |
Lockformer |
Vulcan 2900 |
Good |
sold |
Photo /
More Info. |
5' x 10': LockFormer Vulcan 2900
5ft x 10ft
Hypertherm HT40C Plasma Cutter
Hankison Air Dryer
|
|
Ad # 14215 | Plasma |
1998 |
MG Systems/Welding |
Hypertherm 2000 |
Fair |
sold |
Photo /
More Info. |
2" Thick, Was cutting on 20ft x 45ft table: MG Systems Plasma Cutting System
Model: Hypertherm 2000
Capacity: 2" thickness, was cutting on 20ft.x
45ft. table
Electrical: 460/3
Maximum OCV (U0) ......280 VDC
Output Current (I2) ...40 to 200 amps
Output Voltage (U2) ...150 VDC
Maximum current at 100% duty cycle...200 amps
Note: This is the cutting system only. Water
table not included. A new system was
purchased
and the original table was kept.
Includes:
A set of 50ft. rails
Owner's manuals
Cutting system was disassembled for loading.
|
|
Ad # 15386 | Plasma |
1998 |
Messer |
MG Promaster |
Good |
sold |
Photo /
More Info. |
6' x 12' 1/2' mild steel, 3/8' stainless: 1998 Messer MG – Promaster Gantry Style
CMC Burny Model 12630-141AF High Voltage
1.5 GHZ Processor
Hypertherm HD 3070
100 AMP Hydefinition Power Source
Cutting Range: ½” mild steel, 3/8” stainless
Max cutting width: 6’
Max cutting length: 12’
|
|
Ad # 12221 | Plasma |
1998 |
Messer |
Pilot M2B2-0000 |
Good |
sold |
Photo /
More Info. |
: Used MG Pilot control w/ complete drive package: amplifier, shielded cables... |
|
Ad # 8236 | Plasma |
1998 |
Koike Aronson |
Fabmaster 510 |
Excellent |
Sold |
Photo /
More Info. |
100 Amp Fabmaster 510: 1998 Koike Aronson FabMaster FM 510.
This machine is in excellent condition. Max traverse speed 1000ipm. The Hypertherm Max 100 plasma has a pierce capacity of 5/8". The bed supports up to 5X10 1" plate. New slats installed. Machine is still under power. Demonstration available. This machine can be setup to your specifications with new torch height control and more.
This machine is equipped with:
5X10 Cutting Area.
Hybrid D80 control with graphical user
interface.
Used Word Address or ESSI NC.
3 1/2" floppy disk drive.
2 serial port configurable for RS232 or RS422
Internal Hard Drive
Many extra features.
Hypertherm Max 100 plasma
100 Amp Max Output
Plasma Gas : Dry Shop air
240/480 VAC Supply
1 hand torch with 25' leads.
Floating Head Assembly
Extra Consumables.
Machine comes with original software
Original software includes HVAC fitting
package
(Profile Master Ver. 8)
Add or upgrade to new software package.
Installation & Training available. |
|
Ad # 15409 | Plasma |
1998 |
Vicon |
Fabricator |
Fair |
sold |
Photo /
More Info. |
3/4": Used Vicon Fabricator cnc plasma complete with hypertherm
HD3070 High Definition plasma torch
unit is not under power, and has not been since taken from
power 2 years ago.It includes the torch and operating
componentry |
|
Ad # 2661 | Plasma |
1998 |
Westinghouse |
PMSO |
Very Good |
Sold |
Photo /
More Info. |
Plasma Cutter tracing table 4' x 4': Cuts 1/4" steel, 7/16" Aluminum
4' x 4' table
Tracing Speed 100 mm/min - 3000 mm/min
Pak Master 50 TDC
Air & Nitrogen only
Made in USA
Has manuals. |
|
Ad # 15411 | Plasma |
1999 |
Lockformer |
Vulcan |
Excellent |
sold |
Photo /
More Info. |
.25": Excellent condition Lockformer HVAC CNC Plasma table 5x10
very well cared for
complete with entire operating system for making duct work,
literally plug N Play |
|
Ad # 11066 | Plasma |
1999 |
Lockformer |
Vulcan 2900 |
Good |
sold |
Photo /
More Info. |
5 x 10 table: Used Lockformer Vulcan 2900 Plasma Cutter
Serial # VUL-3402
5’x10’ Table with new inserts
Cutting capacity 3/8" up to 1/2" max steel
Powermax 1000 Plasma Source series
Includes: Software
spare parts for all major components
New Head
SpeedAire Air Dryer
Assorted Tips
Video of plasma running available.
new drives and head ..
spare parts-
runs good ready to go
|
|
Ad # 10859 | Plasma |
1999 |
ESAB |
Shadow |
Good |
sold |
Photo /
More Info. |
100 amp plasma: ESAB-100 amp unit
vision 100 controller,
travel 6'x14'
air dryer
oxy fuel station |
|
Ad # 12852 | Plasma |
1999 |
Vicon |
fabricator |
Good |
sold |
Photo /
More Info. |
3/4" 5x10: Vicon high definition plasma system 5x10
100% usa made
complete with all hardware and software
hypertherm hd3070 high def torch with gas console
machine needs good bath only |
|
Ad # 15490 | Plasma |
2002 |
Multi Cam |
1000 |
Excellent |
sold |
Photo /
More Info. |
5' x 10' table-3/8 capacity in steel : 5x10 cnc plasma
3/8" capacity steel
complete hvac library
all components included
recently replaced hypertherm powermax 1000 (2 mos old)
Unit features, optional liner cutting attatchment |
|
Ad # 7580 | Plasma |
2002 |
Esab |
ESP 150 |
Excellent |
SOLD |
Photo /
More Info. |
150 amps, Capable of severing 2" material: These machines were purchased new in 2002 to dismantle a gold mine and were... |
|
Ad # 5692 | Plasma |
2003 |
Koike Aronson |
IK 1200J |
Excellent |
sold |
Photo /
More Info. |
48" x 120" Koike Aronson Shape Cutting Machine: IK 1200J Koike Aronson shape cutting machine.
Laser eye tracer type pattern recognition
This is a nc tracer eye type cutting machine with optical eye and one torch, but can handle up to 4 torches. Just draw part on paper with marker and it will cut out part automatically...
Includes:
Hypertherm Powermax 600 with machine torch 086034.
Circle scanner tracer.
Line detection converted to x and y drive.
Up to four torch max.
Cutting thickness: 8" with one torch 6" with two torches, 4" with three torches, and 2" with four torches.
Tracing range is 48".
Effective cutting width is 48".
Effective cutting length is 120".
Overall rail system is 165.5".
Moveable tracing table is 48 x 47-1/4 inches.
Manual torch lift.
Input power is 115v,50-60hz single phase 10 amp.
no table under cutting torch..
has less than 800 hrs on it |
|
Ad # 13746 | Plasma |
2003 |
Komatsu |
TFPL 6084 Twister |
Good |
sold |
Photo /
More Info. |
300 amp High Definition: (2003)
Komatsu Plasma Cutter (HIGH DEFINITION)
Model TFPL 6084 Twister
cutting bed: 8.5' x 55.5'
300 amp
76 kva
carbon steel 36mm max thickness
speed: 6m/min
positioning accuracy: =/- 0.15/300mm
repeatability: =/- 0.10mm
|
|
Ad # 9551 | Plasma |
2004 |
Kamatsu |
TFPL 6084 Twister |
Good |
Sold |
Photo /
More Info. |
cutting bed: 8' x 40': (2004)
(2) Kamatsu Model TFPL 6084 Twister
cutting bed: 8' x 40'
300 amp
76 kva
carbon steel 36mm max thickness
fanuc 18m control
speed: 6m/min
positiong accuracy: +/- 0.15/300mm
repeatability: +/- 0.10mm
2 units available
|
|
Ad # 15670 | Plasma |
2004 |
TRACKER |
|
Good |
sold |
Photo /
More Info. |
5 x 10: 2004 TRACKER 5X10
PLASMA TABLE, WITH
THERMAL DYNAMICS
151 POWER SUPPLY.
MACHINE CUTS UP TO 1-
1/2" STEEL. ITEMS
INCLUDED ARE AS
FOLLOWS, LAPTOP
COMPUTER LOADED WITH
COREL DRAW 4 AND CUT
N COMMAND, EXHAUST
FAN, AND EXTRA
MISC TIPS AND
ELECTRODES. WE BOUGHT
THIS MACHINE NEW
AND HAS RECENTLY
UPGRADED TO A NEW
WATER TABLE. FILL
FREE TO CONTACT US
WITH ANY QUESTIONS. |
|
Ad # 15719 | Plasma |
2004 |
TRACKER |
|
Good |
sold |
Photo /
More Info. |
5 x 10: 2004 TRACKER 5X10 PLASMA TABLE, WITH THERMAL DYNAMICS 151 POWER SUPPLY.
MACHINE CUTS UP TO 1-1/2'' STEEL.
ITEMS INCLUDED ARE AS FOLLOWS:
LAPTOP COMPUTER LOADED WITH COREL DRAW 4 AND CUT IN COMMAND EXHAUST FAN EXTRA MISC. TIPS AND ELECTRODES.
Power is 3phase 220, operating air pressure 80psi
WE BOUGHT THIS MACHINE NEW AND HAVE RECENTLY UPGRADED TO A NEW WATER TABLE. |
|
Ad # 8931 | Plasma |
2004 |
Multicam |
MP-305 |
Good |
sold |
Photo /
More Info. |
Travels 80" X 145": Maximum Cutting Width 80"
Maximum Cutting Length 145"
Maximum Clearance Under Gantry 6"
Equipped With Multicam CNC Controls
Pendant Control
High Speed Contouring
Self Diagnostics
Hypertherm HPR 130 AMP
Hydefinition Plasma Power Source
Torch Interface
Manual Gas Console
Cutting Range .048"- 2" Oxygen
Hypertherm Automatic Torch Height Control
Precision Dual X-Axis Drives
|
|
Ad # 13675 | Plasma |
2005 |
ESAB |
Sabre |
Good |
sold |
Photo /
More Info. |
3 axis cnc-10 x 13" cut area: 1-1/4" mth max: 2005 Esab Sabre 3 axis plasma cutter
uses a ESAB 200AMP plasma unit # EXP/EPP200
Cut area: 10'x 13' max
pierce up to 1-1/4" steel
control:Hypertherm-edge# 4P2-1146-0101-2-w/
shape library
break away head design
water table
new linear bearing installed recently
network capable |
|
Ad # 7639 | Plasma |
2006 |
CNC Machinery |
PLZ4x8 |
Excellent |
Sold |
Photo /
More Info. |
4' x 8' Plasma Cutter: 4 x 8 sheet size
machine has cut only a few samples, employ to operate machine left company, machine comes with everything for sheetmetal shop operation including bobcad, mach 2 and design fab 2 programs, hard bound manual, computer, plasma cutter and cables, interface and indicator panel
must see to believe condition of machine |
|
Ad # 13676 | Plasma |
2007 |
ESAB |
Sabre SXEP1-4000-vis52 |
Good |
sold |
Photo /
More Info. |
Hi-DEF 12' x 12' travel 200amp: 2007 ESAB Sabre SEXP1-4000-vis52
control:Esab ANC52-0 w/usb port-network capable w/ shape manager files & technology files macros: on board diagnostics
travels: 12' x 12' max: table 12' x 11'
collission sensor head
water table
air curtain capable& methane etching capable-not included
|
|
Ad # 12635 | Plasma |
2007 |
Tracker |
60" x 120" |
Needs Work |
sold |
Photo /
More Info. |
60" x 120": 100 amp : 2007 Tracker 60” x 120” plasma cutting table.
Computer- Asus M2NBP_VM with 2.4 ghz
processor
and 512mb RAM.
Running version 3.11.18 control software
and Corel DRAW X3
Plasma Cutter- Thermal Dynamics
Cutmaster
151 - z axis cut has auto down feed-active
tracking
Advertised thickness for the plasma
cutter
is up to 1-1/4" genuine cut. Unit is 100
amp.
Set up for 208-230 single phase.
Note:needs a new or repair of the main control board you can replaced or get it
repaired to function properly,board In stock at Tracker for $600. |
|
Ad # 9861 | Plasma |
2008 |
ESAB |
PieceMaker 2 - 5 |
Excellent |
sold |
Photo /
More Info. |
ESAB Plasma Table, PieceMaker 2 - 5, 5x10 : This Piecemaker 2 plasma cutting table has a 5x10 cutting surface. Sells f... |
|
Ad # 9103 | Plasma |
2008 |
Torchmate |
III |
Excellent |
Sold |
Photo /
More Info. |
5x10 table: This machine has less than 4 hours on it, in wood only.
Fully loaded with everything.
Also, will do wood, plastic and foam production.
5 ft x 10 ft table
X,Y, Z axis. 3D routing production.
Price can be reduced by deleting some of the following add-ons:
Router attachment-std-does not want to seperate
Hypertherm 1000 with torch (brand new)-if not wanted less $2000
Torchmate CAD-comes with it std
BOBcad CAD/CAM 3d Axis-if not needed less 4,000
Arc Height Voltage control unit-std
Carrier Unit-std
To much to list on here!
With all the attachments and CAD systems... cost is over $38,000.00
|
|
Ad # 11585 | Plasma |
2008 |
Esab |
peacemaker-2 |
Excellent |
sold |
Photo /
More Info. |
6' x 30': 2008 esab plasma table ..100 amp..very good condition...low hours of usage.... |
|
Ad # 13691 | Plasma |
2008 |
PlasmaCAM, Inc., Colorado |
DHC |
Excellent |
sold |
Photo /
More Info. |
48-inch by 48-inch pattern: 2008 PlasmaCAM, Inc., Colorado # DHC
48-inch by 48-inch pattern
Owner has computer disc & programs.
Makes high-quality ducts, fittings, flanges and brackets for custom mechanical jobs. Other uses include ornamental iron work, signs and lettering, metal art, designs, sculptures, geometric shapes, body panels for automobiles, and many more uses. Can cut up to a 48-inch by 48-inch pattern. Cuts up to thickness of 1 inches (max). Cutting area is 48-1/2 inches square, but can cut pieces up to 20 feet long by indexing. Additional information can be found at: http://www.plasmacam.com/indexfla.php.
|
|
Ad # 10591 | Plasma |
2008 |
CNC Tracker |
4X8 pro table |
Excellent |
sold |
No Photo /
More Info. |
1" cut 4X8 plasma cutting table: Only used 60 hours. Comes complete with machine head torch
and plasma cutter made by Miller. The brochure indicated that it
can sever up to 1" thick steel in a single pass. |
|
Ad # 9570 | Plasma |
2008 |
PlasmaCam |
DHC2 |
Excellent |
Sold |
Photo /
More Info. |
4ft x 20ft cutting capacity, 4 x 4 table: PlasmaCam CNC Cutting outfit. Digital height control. Closed-loop servo c... |
|
Ad # 10291 | Plasma |
2010 |
MicroStep |
Plasmacut |
Demo Machine |
sold |
Photo /
More Info. |
5' x 10' Plasma Cutting Machine with HSD 130 Hypertherm: Demo machine as new. Hypertherm HSD 130 Power source and Microstep Control.... |
|
Ad # 13678 | Plasma |
2011 |
ESAB |
Combirex DX3500 |
Good |
sold |
Photo /
More Info. |
360 amp:12ft x 18ft plasma w/ oxy head: 2011 EASAB Combirex DX3500 Plasma/oxy fuel system
control:esab vision 51
360 amp power unit w/ seperate chiller# ec-11
shape mgr software
break away head
1 oxy head included
bed : 9' x 13'
pc 36 torch unit
travels: 12'w x 18' L max
sold for 165,000 new |
|
Ad # 16040 | Plasma |
2013 |
Dynatorch/Hypertherm |
XLR8 |
Good |
sold |
Photo /
More Info. |
5' x 10ft :1" cap: 2013 Dynatorch XLR8 with a Hypertherm Powermax 105. It will accommodate 5 X... |
|
Ad # 15567 | Plasma |
2014 |
Hornet |
SS |
Good |
Sold |
Photo /
More Info. |
5 x 10ft: 2014 Retro Systems,
Hornet SS CNC Plasma
Cutting Machine, 5x10
Cutting Area, Model:
HSS60-ESR150, S/N:
2583, w/ Hypertherm
PowerMax 105, S/N:
105-010838
std mfg specs below-
please verify actual
machine
he Hornet SS CNC
plasma cutter is
configured with
heavy-duty components
to deliver decades of
unmatched cutting
performance. This CNC
plasma machine is
designed for
customers who require
a unitized industrial
quality plasma table
with no more than one
plasma torch and one
oxy-fuel torch. The
Hornet SS may be
configured with an
integrated CNC
cutting table in
either a water table
or downdraft air
table design.
The CNC plasma
machine is configured
with a Hypertherm
Edge Connect PC based
CNC control,
Hypertherm Sensor
torch height control
electronics, Hornet
Cutting Systems RSVS-
200 plasma lifter,
powerful AC servo
motors, low back-lash
planetary gear boxes
and precision ground
linear guides for all
drive axes to deliver
premium motion
control and cutting
accuracy.
Standard Features of
the Hornet SS CNC
Plasma Cutter
Hypertherm
Plasma Edge Connect
CNC Control with
Phoenix CNC software
Heavy Wall Steel
Tubing Machine Frame
and Gantry Beam
Fabricated End
Trucks
1,000 IPM Rapid
Traverse Speed
(25m/min)
Tucked 20mm
Linear Guides on Main
Rail Axis (X)
Dual 20mm Linear
Guides on Cross Axis
(Y)
Alloy Steel
Pinion Gears
Tucked 3/4”
(19.5 mm) Gear Rack
Planetary Gear
Heads
Enclosed
Flexible Cable
Carriers on Both X &
Y Axis
Tool Carriage
for Two Tools
Phoenix CNC Control
Software
Microsoft
Windows 10 – embedded
version.
Hypertherm
Phoenix CNC software.
Remote Help via
the internet.
Cut Pro Wizard
Customizable
process tables.
CAD file to CNC
converter & row and
column nesting.
Enlarged screen
elements with pop-up
keyboards and number
pads.
Shape library
with 68 shapes,
allowing more than
300 parts to be
programmed.
Shape Wizard
allows to construct /
edit parts on screen
Dynamic kerf
compensation.
Restart cutting
ahead or behind
current position or
move to exact pierce
number.
Move forward or
backward on path.
Watch windows
for speed, position,
consumable life,
process data, and
status messages.
Online Help
function
Plasma THC
Technology
SENSOR THC
electronics and
Hornet Cutting
Systems RSVS-200
Lifter:
Delivers
Hypertherm Rapid Part
Technology with
ProNest and Collision
Avoidance
600 IPM (15
m/min) vertical
positioning speed
Pierce height
sensing using Ohmic
or position error
stall detection
Maintains torch
to plate height
during cut via
voltage regulation
8″ (200 mm)
stroke travel for
torch positioning
50-300 VDC Arc
Voltage Range in .1
volt increments
Pneumatic plasma
torch collision mount
with E-Stop to CNC
THC Control
Parameters:
Transfer height
Pierce height
Pierce time
Cutting height
Cutting voltage
Retract height
after cut |
|
Ad # 15136 | Plasma |
2015 |
Knuth |
Plasma-Jet DST 1530 |
New |
sold |
Photo /
More Info. |
5 x 10 with Hypertherm 130 XD: Plasma-Jet DST 1530 HPR 130 XD
World-Class Plasma Cutter Systems based on
the know-how and technology of the market
leader Hypertherm
Allowing maximum utilization of all
possibilities offered by state-of-the-art
plasma technology:
•Selection of the optimum Hypertherm plasma
source
•Hypertherm MicroEDGE Pro CNC control &
software package
•Sensor for automatic torch height control
(THC)
•Electro-pneumatically controlled vacuum
table
•Extremely rigid design for maximum cutting
precision
•Dual-drive bridge
•High-quality linear guides on all axes
•Dynamic AC servo drives on all axes with
maintenance-free, zero-backlash planetary gears
•Low-wear and low-maintenance helical gears
are designed for continuous operation
•Optimum bed speed even for fine contours and
tight radii
•Automatic torch height control
•Adjustable cutting current
•Stand-alone cutter table features rigid
steel construction for high load capacity
•Stand-alone table eliminates thermal and
mechanical influences on the plasma cutter
system
•Quick-coupling for cutter head changes in
seconds
•Minimized tooling time ensure maximum cost
savings
•Use the existing cutting parameters stored
in the control to find the optimum cut
•Available with oxy-fuel cutter head, tube
cutter and other options
Specifications:
cutting range 65x138 "
rapid feed 787 "/min
table load capacity 205 lbs/ft²
Plasma source - Hypertherm – HPR130XD
•Mild steel cut capacity
Dross free cutting 16 mm (5/8")
Production pierce 32 mm (1-1/4")
Maximum cutting capacity 38 mm (1-1/2")
•Stainless steel cut capacity
Production pierce 20 mm (3/4")
Maximum cutting capacity 25 mm (1")
cut angle ISO 9013 range 2-4
plasma source power 29.5 Hp
cutting current 30 - 130 A
process gases Material specific
plasma source dimensions 43x22x38 "
plasma source weight 858 lbs
Accuracies
positioning accuracies ± 0,02 mm / 0,0008"
repeatability ± 0,02 mm / 0,0008"
Measures and weights
overall dimensions 138x197 "
weight (without plasma source/vacuum) 5,940
lbs
Control
Hypertherm MicroEDGE Pro
Increased quality and productivity for
reduced cost using an advanced control
technology!
•HyDefinition cut quality
•Automatic kerf-width compensation according
to material thickness, current and speed
•Automatically adjusted plunge-cut and
cutting height ensure maximum service life of
wear parts
•Offline software automatically sets up the
cutting process parameter
•Easy configuration of orders with CutPro
Wizard
•User prompts to enter board type and wear
part number
•Tips for cutting optimization
•Operator manual for CNC, torch height
control and plasma source on the operating
display
•Diagnostics via Internet
•Offline diagnostics via form requisition/CNC
software for the parts program
•Operating system: Windows
•Industrial PC with 15" touch-screen monitor
•Graphical user interface
•USB port
Standard Equipment
Hypertherm CNC control, Hypertherm plasma
source, Z axis sensor for torch-height control,
mini-starter set for consumable parts,
operating manual and programming instructions.
Included Optional Equipment
Automatic Gas Console
Filter exhaust system
Hypertherm PRONEST Base Software
|
|
Ad # 15063 | Plasma |
2015 |
Vicon |
HD 510 |
Good |
sold |
Photo /
More Info. |
5 x 10 table: Vicon HD 510 Plasma Cutting System
hypertherm powermax 125 cutting unit for station 1
table: 5' X 10'
Vicon fitting software
power max torch leads
hypertherm PHC-sensor height control
monitor on machine control
Okidata printer
208-240/440-480 3 Phase |
|