| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13639 | Powered: Hole / Turret Punches |
| — |
Strippit |
Super 3030 |
Excellent |
sold |
Photo /
More Info. |
| 30 Ton: Specifications:
Tons Punching 30
Throat 30"
Hole Capacity 3-1/2"
Max Material Thickness 1/4" MS
Sheet Size 30" x 60"
Motor 1 HP 230/460/3
Weight 6500 LB
|
|
| Ad # 2915 | Powered: Hole / Turret Punches |
| — |
Quickwork |
23A |
Very Good |
SOLD |
Photo /
More Info. |
| Quickwork Shear / Punch: 2 HP. Capacity 3/16" Mild Steel, Throat 38". Holder For Shear, Mfg: Quick... |
|
| Ad # 229 | Powered: Hole / Turret Punches |
| — |
Wales Strippit |
# 10AA / 30 ton |
Good |
Sold |
Photo /
More Info. |
| Hole punch unit up to 3-1/2" Cap/ 30 ton: 15" throat;
30 Ton units-Electric
30 x 23" table,
gage system
nibbling acc
Will punch up to a hole Dia 3.5"
Misc Tooling Included |
|
| Ad # 14183 | Powered: Hole / Turret Punches |
| ? |
Thor |
1210 AH |
Excellent |
sold |
Photo /
More Info. |
| 10 Station, 12" throat, 1" Dia. 14 Gauge Mild Steel: Thor Turret Punch Press - Air over Hydraulic
Model: 1210 AH
Capacity:
10 Stations
12" throat
1" Dia hole
14 Gauge Mild Steel
Cycles: 60 strokes / min
|
|
| Ad # 14182 | Powered: Hole / Turret Punches |
| ? |
Rotex |
18 ACH-63 |
Excellent |
sold |
Photo /
More Info. |
| 18 Station, 24" throat, 25-30 tons of force: Rotex Hydraulic Turret Punch
Model: 18 ACH-63
Capacity: 18 Stations, 24" throat, 25-30 Tons of
force, 2" max punch size
Electrical: 230/3 phase
Example of punch capacity thicknesses@25tons in
mild steel: 1/2" hole thru 1/2" , 3/4" hole thru
7/16",1" hole thru 5/16", 1-1/2" hole thru 3/16",
2" hole thru 1/8"
|
|
| Ad # 13777 | Powered: Hole / Turret Punches |
| NA |
fabriLine |
— |
Good |
sold |
Photo /
More Info. |
| N/A: This is a used beam line. it was purchased not under
power and we have to buy to get the conveyors we
wanted. It is a 5 punch system. Owner advised it was
operational before taken out of service. |
|
| Ad # 6553 | Powered: Hole / Turret Punches |
| — |
Heck |
3-C |
Very Good |
sold |
Photo /
More Info. |
| Heck Trace-A-Punch Duplicator, Model 3-C, Nibbler and Punch: Cutting Capacity:
Mild Steel, Stainless Steel and Plastics: 1/8" max
Throat: 6-3/4"
Motor: 1.5 hp
Strokes per minute: 1,750 spm
Work Light
Stand |
|
| Ad # 13034 | Powered: Hole / Turret Punches |
| — |
Strippit |
Super 30 / 30 |
Good |
sold |
Photo /
More Info. |
| 30 Ton: Strippit Super 30/30 Punch. Lots of Tooling. 30" throat. 165 strokes per mi... |
|
| Ad # 9265 | Powered: Hole / Turret Punches |
| 70'S |
Strippit |
Super 30 Punch |
Good |
SOLD |
Photo /
More Info. |
| 1 -1/4" Top Punch Holder : Has 2 Gauge Fingers & 1 1/4" Top Punch Holder which has been welded and rep... |
|
| Ad # 12980 | Powered: Hole / Turret Punches |
| 1963 |
Wiedemann |
RA41-P |
Excellent |
sold |
Photo /
More Info. |
| Table Size 57" x 60": 1963 Wiedemann Turret Punch Press
Model # RA41-P
20 Station
Voltage: 220 / 3 Phase / 60 Cycle
Line Voltage: 208
Table Size 57" x 60"
LOTS Of Extra Dies |
|
| Ad # 12344 | Powered: Hole / Turret Punches |
| 1975 |
strippit |
custom3040 |
Excellent |
sold |
Photo /
More Info. |
| 40 tons: extended table right side, loaded with tooling,
cabinets,complete with duplicator, notcher, side
stops and holders |
|
| Ad # 13150 | Powered: Hole / Turret Punches |
| 1978 |
Rotex |
18 BCH - D |
Good |
sold |
Photo /
More Info. |
| 18 ton-hyd acuaction 25-30 tons force: Rotex Model 18 BCH - D
25-30 tons of force
24" throat
18 stations
2" max punch size
Hydralic acuation Powered 25-30 ton
Example of punch capacity thicknesses@25tons in mild steel: 1/2" hole thru 1/2" , 3/4" hole thru 7/16",1" hole thru 5/16", 1-1/2" hole thru 3/16", 2" hole thru 1/8"
Punch Sizes in machine-below
3/8-round
7/16-round
1/2" square
1" round
1-1/32-round
1-3/16-round
2" x 0.75 slot
Note: Punches may be Dull & a few empty spaces
|
|
| Ad # 12109 | Powered: Hole / Turret Punches |
| 1978 |
Amada |
D-500 |
Good |
sold |
Photo /
More Info. |
| 30 ton -- 3.5" max hole: Amada turret Punch # D-500
30 ton
2 stations
1" stroke
6-5/8" shut height
20" throat
24 x 84" table
3.5" max hole size
some tooling
|
|
| Ad # 14559 | Powered: Hole / Turret Punches |
| 1980? |
Roper Whitney |
ARLT231 |
Good |
sold |
Photo /
More Info. |
| 20 ton : Roper Whitney punch # ARLT 231
electric punch
comes with up to 4" punches hole cap
20 ton force
24" throat,height: 9-3/4"
2" stroke
100 strokes per min
bolster plate size: 1" x 12" x 18"
clutch: pin type non repeat
includes adjust sto-ram clutch system
2HP motor
lots of tooling shown
table 40" x 60" |
|
| Ad # 15336 | Powered: Hole / Turret Punches |
| 1989 |
Strippit |
super AG 30/30 |
Good |
sold |
Photo /
More Info. |
| 30 ton capacity:30" throat: Strippit 30/30 Super AG hole punch-semi-automatic fabricator
30 ton capacity
control:Earlix 2kh-700 #71456:1989
note: 5 full cabinets of tooling included!
note: generic machine specs below-please verify actual machines
Capacity -30 Tons
Throat Depth - 30"
Max Hole Diameter - 3.5" in 12 gauge
Max Material Thickness -1/4"
Table Size - 72" x 48"
Sheet Size - 30" x 30"
Stroke Length 5/8"
Hits per Minute 165
Motor 1 HP
Weight (Approx) 6,500 Lbs.
wired 208/3 phase |
|
| Ad # 13061 | Powered: Hole / Turret Punches |
| 2006 |
Geka |
55/E-500 |
Excellent |
sold |
Photo /
More Info. |
| 60 Ton-hole punch: Geka 60 ton Punch unit only--
std Specifications
Capacity: 60 Tons
Punching Capacity: 1-1/2" thru 3/8"
Throat Depth: 20"
Motor: 6.5 HP
Strokes/min. w/3/4" travel: 37
Maximum Travel: 2-3/8"
Working Height: 42"
Quick change punch holder, keyed for shaped tooling
Full stroke or jog mode
Limit switch adjustment of stroke
Operator's choice of two speeds for punch station with foot
pedal control
Work Table w/Productivity Gauging
Various Punches and Dies
This machine is in excellent condition and operates great.
It also comes with an attachment to accomodate up to 4 inch
holes thru 10ga material and a large number of dies and
tooling approx: 25 pcs |
|
| Ad # 11114 | Powered: Hole / Turret Punches |
| 2008 |
Clark |
H-66 |
Good |
Sold |
Photo /
More Info. |
| 66 ton: The CLARK # H-66
66-ton industrial grade Iron Worker featuring multiple functions, including: Punch, Angle Shear, Flat Shear, Round/Square Bar Shear, Rec. Notch, V-Notch, Channel Shear, Press Brake, Angle Bending and Pipe Notching! It comes standard with: quick-change coupling nut & sleeve, squaring arm with scale, gauging table with stops, punching base table, safety guards and more.
Includes-
* Large Squaring Arm
* 15-in Squaring Arm Scale
* Gauging Table Stops
* Two-Piece Gauging Table
* Quick-Change Coupling Nut & Sleeve
* Multi-Vee Brake Bending Attachment
* Punching Base T-Slot Table
* Installed Safety Guards
Features-
* PUNCHING- The Punching Station offers a full range of universal punches and dies. Unique style allows for large angle iron punching and large channel punching. A large stripper viewing window and the swing away design offers ease of operation. Two-piece gauging table with rulers and stop is offered as standard equipment. Quick change coupling nut and sleeve makes for rapid replacement or changing of the die in use.
* NOTCHING- The Notching Stations unique design allows for unsurpassed cutting of angle and flat barstock. Electrically Interlocked safety guards are installed for maximum operator safety. Built into this ironworker are three gauging stops for precise positioning along with ventilated guard for maximum operator visibility.
* FLAT SHEARING- At the Flat Bar Shearing Station you can easily adjust the hold for precision cutting and shearing without loosing operator visibility. The large 15-inch squaring arm is inlaid with a scale and comes standard on all machines. A specially contoured anti-distortion blade provides quality cuts while a lower blade offers maximum versatility with four usable edges. Set Screws allow for easy gapping with no shimming required. An included large squaring arm makes miter cuts easy to do. Three-foot electronic back gauge allows for fine adjustment and precision accuracy and features a large contact button for maximum productivity. The fully protected electrical harness offers both safety and reliability.
* ANGLE SHEARING- The angle cut shear has the ability to cut angled iron at a 45° angle from both the top and bottom leg, allowing for a picture frame like corner to be made for perfect welds. Installed safety guards are both large and strong offering protection while the machine is in use.
* BAR SHEARING- Round and Square bar shearing station has multiple holes for a variety of sizes. The adjustable hold-down provides a clean squaring cut and with large, heavy-duty knobs the precise hold can be made.
Punching Station accepts a full range of universal punch and dies. Unique style allows for large angle iron punching & large channel punching.
Punching Station has large viewing window on stripper. Uses swing-away design for easy operation. A large two-piece gauging table with rulers and stop is included as standard equipment. Features quick-change coupling nut and sleeve for rapid die replacement.
Notching Station has a unique design allowing for unsurpassed cutting of angle and flat bar. Electrically interlocked safety guard in-place for maximum operator safety. Ventilated guard for maximum operator visibility. Three gauging stops for precise positioning.
Flat Bar Shearing Station has easily adjustable hold-down with good operator visibility for accurate cutting. Large 15" squaring arm with inlaid scale as standard equipment.
Specially contoured anti-distortion blade for quality cuts. Lower blade has for usable edges. Allen head set screws allow for easy gapping of the machine. No shimming is required.
Large, strong guarding for maximum safety.
The angle iron shear has the ability to cut angle iron at 45° both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds.
Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold-down for clean square cutting. Optional channel and "I" beam shears are available.
Diamond shaped blade for quality cuts and no material loss with minimal deformity. 45° miter cut, both top and bottom leg, for a picture frame corner.
Large heavy knobs. Precise square bar cutting.
Mitering with included large squaring arm.
Press brake tooling is supplied as standard equipment, including goose-neck top and multi-vee bottom.
|
|
