Net Machinery Home View Machinery for sale Index of Sold Archive
You are viewing a list of sold machinery in the NetMachinery Sold Archive. If you are looking for available machinery click View Machinery for sale
Home > Sold Machinery Archive > Metalformers, Benders, Notchers, Swagers > Swagers

We found 13 matching ads. Now displaying the remaining 13 ads.

(Tip: Click on the column headers to sort your results by that criteria)
Year Make Model Condition Price Details

Ad # 8052Swagers
Ad to Checklist
Fenn HydroFormer 2-H Good sold small camera icon Photo / More Info.
2" FENN 2-H Hydroformer: Hydraformer Capacity: 2" tube Solids: 15/16" 3" depth 2 piece Die-extra rollers & hammers lots of tooling approx: $10,000 worth

Ad # 4323Swagers
Ad to Checklist
1996 Victaulic Ridge/Victaulic # VH 901 Very Good Sold small camera icon Photo / More Info.
PORTABLE PIPE GROOVER on TRI-POD STAND: This machine is used for generating grooves on piping. It is a standard Pip...

Ad # 9701Swagers
Ad to Checklist
2002 Birmingham L-20 Very Good sold No Photo / More Info.
—: Model L-20 Features: All steel forming head Hardened and ground shafts Case hardened steel forming rolls Machine cut gears Needle roller bearings Capacity: 20 gauge (.036") max to 24 gauge (.024") min. Uses approximately 1 inch of metal to form pittsburgh type lock. Pocket Depth: 5/6" width of hammer-over edge, adjusts to 3/8" Speed: 25 feet per minute Motor: 1 H.P. 110 volt, single phase, V-belt drive Stand: Arc welded steel

Ad # 10586Swagers
Ad to Checklist
1992 Conrac 369 Good sold small camera icon Photo / More Info.
—: some dies included specs to follow

Ad # 10585Swagers
Ad to Checklist
PHI 369 Good sold small camera icon Photo / More Info.
—: Swager some tooling/dies Tech specs to follow

Ad # 2840Swagers
Ad to Checklist
Uknown STANDARD 3A Sold small camera icon Photo / More Info.
Standard Swager: Capacity: 1.75 " 5/8"Solid,1-3/4"Tubing capacity, 2Die, Die Length 2-1/2", Simular TO 3F Finn

Ad # 8376Swagers
Ad to Checklist
1974 IBP Jariston JB18 Good sold small camera icon Photo / More Info.
3/4 IBP JB 18, 2-DIE SWAGER: USED 3/4" IBP EQUIPMENT SWAGER, Two Die Type Capacity: 3/4" Dia. Maximum Tube 5/64" Dia. Minimum Tube Die Width:1 1/4" Die Height:1" Die Length:4" Hammer Width:1 1/4" Hammer Height:1" Hammer Length:4" Height to Spindle Centerline:36" EQUIPPED WITH: Selector Switch For Off On Automatic Oil Lubrication 2 HP 1450 RPM 230/460/3/60 Motor

Ad # 8375Swagers
Ad to Checklist
Abbey Etna 1515WD Good sold small camera icon Photo / More Info.
1-1/2 in ABBEY ETNA 2-DIE SWAGER: USED ABBEY ETNA SWAGER, 2-Die Type Capacities: 1-1/2" Tubing - Mild Steel 3/4" Dia. Solid - Mild Steel Die Width:3" Die Thickness:1-5/8" Die Length:15" Diameter of Rolls:1-31/32" Number of Rolls:16 Height to Spindle Centerline:40" Spindle Speeds Approx.:200 RPM EQUIPPED WITH: Approx. 24" Stroke Hydraulic Feed w/Air Actuated Clamps Gusher Coolant Pump w/Control Pushbuttons For Start - Stop 1/10 HP 3450 RPM Coolant Motor 7-1/2 HP 1800 RPM 220/440/3/60 Motor

Ad # 8377Swagers
Ad to Checklist
Abbey Etna Mdl 1512 Good sold small camera icon Photo / More Info.
1-1/2in Abbey Etner 1512, 2-Die Swager: USED ABBEY ETNA SWAGER, 2-Die Type Capacity: Tubing:1-1/2" Mild Steel Solids:3/4" Mild Steel Die Length:12" Die Width:2-1/2" Die Thickness:1-5/8" Hammer Thickness:2-3/8" Height to Spindle Centerline:38" Spindle Speed Approx.:200 EQUIPPED WITH: Approx. 24" Stroke Hydraulic Feed Pushbuttons For Start - Stop 1-Set of Dies 7-1/2 HP 1150 RPM 220/440/3/60 Motor

Ad # 8371Swagers
Ad to Checklist
1965 Fenn 8FS Good sold small camera icon Photo / More Info.
3-3/8in FENN 4-DIE SWAGER: USED FENN SWAGER "STATIONARY DIE" - Four Die Type Ideal for Use Where It Is Desirable to Keep Work From Rotating Such As In Swaging Square & Symmetrical Shapes Four Die Type Capacity: Solids - 3-3/8" Mild Steel Tubing - 6" Mild Steel Die Width:6.5" Die Height:6" Die Length:15" Hammer Width:6.5" Hammer Height:5.5" Hammer Length:15" Number of Rolls:12 x 21.5" Long Inner Dia. of Rolls:23.5" (Approx.) Diameter of Flywheel:57" Opening Thru Spindle:7" Square Pass Line:37.5" EQUIPPED WITH: Horizontal Feed System for Flats With 5" Wide Vertical Clamp (Powered) 4 Hammers - 15" Long 2 Die Blocks - For Flats - 8-1/2" Long 1/3 HP 1125 RPM 115/230/1/60 Coolant Motor 20 HP 650-2200 RPM 240 Volt D.C. Shunt Wound Drive Motor Feed: 46" L-R x 21" F-B x 55" H

Ad # 8373Swagers
Ad to Checklist
Torrington 433 Good sold small camera icon Photo / More Info.
2-1/4in TORRINGTON ROTARY SWAGING MACHINE , 2-DIE TYPE: USED TORRINGTON ROTARY SWAGING MACHINE, 2-Die Type Capacity: Solids:5/8" Mild Steel Tubing:2-1/4" Mild Steel Die Width:2.687" Die Height:1.920" Die Length:3" Hammer Width:2.687" Hammer Height:1.750" Hammer Length:3" Height to Spindle Centerline:38" Spindle Speed Approx.:250 RPM EQUIPPED WITH: Pushbuttons For Start - Stop Motor Driven Coolant Pump & Tank Production Counter 5 HP 1750 RPM 220/440/3/60 Motor

Ad # 8374Swagers
Ad to Checklist
1993 Fenn 3F Good Sold small camera icon Photo / More Info.
1-3/4" FENN 2-DIE TYPE SWAGER: USED FENN SWAGER, 2-Die Type Capacity: Solids:5/8" Mild Steel Tubing:1-3/4" Mild Steel Die Width:2-1/4" Die Height:1-19/32" Die Length:2-1/2" Hammer Width:2-1/4" Hammer Height:1-17/32" Hammer Length:2-1/2" Height to Spindle Centerline:35" Spindle Speed Approx.:312 RPM EQUIPPED WITH: Pushbuttons For Start - Stop 5 HP 1725 RPM 230/460/3/60 Motor

Ad # 8372Swagers
Ad to Checklist
Torrington 438 Good sold small camera icon Photo / More Info.
2-1/2in TORRINGTON SWAGER, 2-Die Type: USED TORRINGTON SWAGER, 2-Die Type Capacity: Solids:1" w/1-1/2" Die 5/8" w/3" Die Tubing:2-1/2" Mild Steel Largest Taper in (1) Operation:8-1/4" Die Width:2.937" Die Height:1.920" Die Length:8-3/8" Hammer Width:2.937" Hammer Height:1.750" Hammer Length:8-3/8" Diameter Hole Through Spndle:2-5/16" Height to Spindle Centerline:40" Spindle Speed Approx.: 250 RPM EQUIPPED WITH: Pushbuttons For Start - Stop (1) Set of Dies 10 HP 1750 RPM 3 Phase 60 Cycle Motor


Content copyright 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.