Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8371 | Swagers |
1965 |
Fenn |
8FS |
Good |
sold |
Photo /
More Info. |
3-3/8in FENN 4-DIE SWAGER: USED FENN SWAGER "STATIONARY DIE" - Four Die Type
Ideal for Use Where It Is Desirable to Keep Work From Rotating Such As In
Swaging Square & Symmetrical Shapes
Four Die Type
Capacity:
Solids - 3-3/8" Mild Steel
Tubing - 6" Mild Steel
Die Width:6.5"
Die Height:6"
Die Length:15"
Hammer Width:6.5"
Hammer Height:5.5"
Hammer Length:15"
Number of Rolls:12 x 21.5" Long
Inner Dia. of Rolls:23.5" (Approx.)
Diameter of Flywheel:57"
Opening Thru Spindle:7" Square
Pass Line:37.5"
EQUIPPED WITH:
Horizontal Feed System for Flats With 5" Wide Vertical Clamp (Powered)
4 Hammers - 15" Long 2 Die Blocks - For Flats - 8-1/2" Long
1/3 HP 1125 RPM 115/230/1/60 Coolant
Motor
20 HP 650-2200 RPM 240 Volt D.C. Shunt Wound Drive Motor
Feed: 46" L-R x 21" F-B x 55" H
|
|
Ad # 8052 | Swagers |
|
Fenn |
HydroFormer 2-H |
Good |
sold |
Photo /
More Info. |
2" FENN 2-H Hydroformer: Hydraformer
Capacity: 2" tube
Solids: 15/16"
3" depth
2 piece Die-extra rollers & hammers
lots of tooling approx: $10,000 worth
|
|
Ad # 10586 | Swagers |
1992 |
Conrac |
369 |
Good |
sold |
Photo /
More Info. |
: some dies included
specs to follow |
|
Ad # 8373 | Swagers |
|
Torrington |
433 |
Good |
sold |
Photo /
More Info. |
2-1/4in TORRINGTON ROTARY SWAGING MACHINE , 2-DIE TYPE: USED TORRINGTON ROTARY SWAGING MACHINE, 2-Die Type
Capacity:
Solids:5/8" Mild Steel
Tubing:2-1/4" Mild Steel
Die Width:2.687"
Die Height:1.920"
Die Length:3"
Hammer Width:2.687"
Hammer Height:1.750"
Hammer Length:3"
Height to Spindle Centerline:38"
Spindle Speed Approx.:250 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
Motor Driven Coolant Pump & Tank
Production Counter
5 HP 1750 RPM 220/440/3/60 Motor
|
|
Ad # 8376 | Swagers |
1974 |
IBP Jariston |
JB18 |
Good |
sold |
Photo /
More Info. |
3/4 IBP JB 18, 2-DIE SWAGER: USED 3/4" IBP EQUIPMENT SWAGER, Two Die Type
Capacity:
3/4" Dia. Maximum Tube
5/64" Dia. Minimum Tube
Die Width:1 1/4"
Die Height:1"
Die Length:4"
Hammer Width:1 1/4"
Hammer Height:1"
Hammer Length:4"
Height to Spindle Centerline:36"
EQUIPPED WITH:
Selector Switch For Off On
Automatic Oil Lubrication
2 HP 1450 RPM 230/460/3/60 Motor
|
|
Ad # 9701 | Swagers |
2002 |
Birmingham |
L-20 |
Very Good |
sold |
No Photo /
More Info. |
: Model L-20 Features:
• All steel forming head
• Hardened and ground shafts
• Case hardened steel forming rolls
• Machine cut gears
• Needle roller bearings
Capacity: 20 gauge (.036") max to 24 gauge
(.024") min.
Uses approximately 1 inch of metal to form
pittsburgh type lock.
Pocket Depth: 5/6" width of hammer-over edge,
adjusts to 3/8"
Speed: 25 feet per minute
Motor: 1 H.P. 110 volt, single phase, V-belt
drive
Stand: Arc welded steel
|
|
Ad # 10585 | Swagers |
|
PHI |
369 |
Good |
sold |
Photo /
More Info. |
: Swager
some tooling/dies
Tech specs to follow |
|
Ad # 8375 | Swagers |
|
Abbey Etna |
1515WD |
Good |
sold |
Photo /
More Info. |
1-1/2 in ABBEY ETNA 2-DIE SWAGER: USED ABBEY ETNA SWAGER, 2-Die Type
Capacities:
1-1/2" Tubing - Mild Steel
3/4" Dia. Solid - Mild Steel
Die Width:3"
Die Thickness:1-5/8"
Die Length:15"
Diameter of Rolls:1-31/32"
Number of Rolls:16
Height to Spindle Centerline:40"
Spindle Speeds Approx.:200 RPM
EQUIPPED WITH:
Approx. 24" Stroke Hydraulic Feed
w/Air Actuated Clamps
Gusher Coolant Pump w/Control
Pushbuttons For Start - Stop
1/10 HP 3450 RPM Coolant Motor
7-1/2 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 8374 | Swagers |
1993 |
Fenn |
3F |
Good |
Sold |
Photo /
More Info. |
1-3/4" FENN 2-DIE TYPE SWAGER: USED FENN SWAGER, 2-Die Type
Capacity:
Solids:5/8" Mild Steel
Tubing:1-3/4" Mild Steel
Die Width:2-1/4"
Die Height:1-19/32"
Die Length:2-1/2"
Hammer Width:2-1/4"
Hammer Height:1-17/32"
Hammer Length:2-1/2"
Height to Spindle Centerline:35"
Spindle Speed Approx.:312 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
5 HP 1725 RPM 230/460/3/60 Motor
|
|
Ad # 2840 | Swagers |
Uknown |
STANDARD |
3A |
|
Sold |
Photo /
More Info. |
Standard Swager: Capacity: 1.75 "
5/8"Solid,1-3/4"Tubing capacity,
2Die,
Die Length 2-1/2",
Simular TO 3F Finn
|
|
Ad # 4323 | Swagers |
1996 |
Victaulic |
Ridge/Victaulic # VH 901 |
Very Good |
Sold |
Photo /
More Info. |
PORTABLE PIPE GROOVER on TRI-POD STAND: This machine is used for generating grooves on piping. It is a standard Pip... |
|
Ad # 8377 | Swagers |
|
Abbey Etna |
Mdl 1512 |
Good |
sold |
Photo /
More Info. |
1-1/2in Abbey Etner 1512, 2-Die Swager: USED ABBEY ETNA SWAGER, 2-Die Type
Capacity:
Tubing:1-1/2" Mild Steel
Solids:3/4" Mild Steel
Die Length:12"
Die Width:2-1/2"
Die Thickness:1-5/8"
Hammer Thickness:2-3/8"
Height to Spindle Centerline:38"
Spindle Speed Approx.:200
EQUIPPED WITH:
Approx. 24" Stroke Hydraulic Feed
Pushbuttons For Start - Stop
1-Set of Dies
7-1/2 HP 1150 RPM 220/440/3/60 Motor
|
|
Ad # 8372 | Swagers |
|
Torrington |
438 |
Good |
sold |
Photo /
More Info. |
2-1/2in TORRINGTON SWAGER, 2-Die Type: USED TORRINGTON SWAGER, 2-Die Type
Capacity:
Solids:1" w/1-1/2" Die
5/8" w/3" Die
Tubing:2-1/2" Mild Steel
Largest Taper in (1) Operation:8-1/4"
Die Width:2.937"
Die Height:1.920"
Die Length:8-3/8"
Hammer Width:2.937"
Hammer Height:1.750"
Hammer Length:8-3/8"
Diameter Hole Through Spndle:2-5/16"
Height to Spindle Centerline:40"
Spindle Speed Approx.: 250 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
(1) Set of Dies
10 HP 1750 RPM 3 Phase 60 Cycle Motor
|
|