Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10093 | Shrinker/Stretchers, English Wheels, Power Hammers |
na |
|
English Wheel |
|
Sold |
No Photo /
More Info. |
: |
|
Ad # 9737 | Shrinker/Stretchers, English Wheels, Power Hammers |
2008 |
Baileigh |
MH-19 |
Excellent |
Sold |
Photo /
More Info. |
: 2008 Baleigh MH-19 Multi Function Power Hammer With: Variable Speed, 19" Th... |
|
Ad # 14996 | Shrinker/Stretchers, English Wheels, Power Hammers |
? |
Gnosjo |
Medium |
Good |
sold |
Photo /
More Info. |
Circle Nibbler 44" throat 15/64 cap : •Gnosjo nibbler/circle shear
Circle Nibbler 44" throat 15/64 cap
size: medium 15/64 cap
also a have a circle cutting attachment
approx:1"/22mm round shank tooling
made in sweden
4 position lever
some minor tooling included |
|
Ad # 9234 | Shrinker/Stretchers, English Wheels, Power Hammers |
|
Hufford |
Swingarm |
Very Good |
sold |
Photo /
More Info. |
Hufford 59 ton w/bulldozer: 1 set of 8” Gripper Jaws
Max. Distance Between Jaws: 237”
Max. Die Length for 180 degree Bend at Full Tonnage: 72”
Table Dimensions: 50” x 84”
Table Contains 76 Uniformly Spaced Tapped Holes and Keyways
Each Arm Movement is Independently Actuated
Tensions Cylinder Swivel: +/- 25 Degrees
Oil Reservoir: 180 Gallons
Electrical Motors: 1 – 25 hp, 1 – 40 hp, 1 – 20 hp, 2 – 5 hp (Carriage Movement)
Machine Speeds:
•Tension Cylinder Extend: 35 sec.
•Tension Cylinder Retract: 26 sec.
•Arms Move Back (107 Degrees): 29 sec.
•Arms Move Forward (107 Degrees): 10 sec.
Overall Dimensions:
•Width: 388”
•Depth (Arm Forward): 267”
•Height: 76”
|
|
Ad # 11463 | Shrinker/Stretchers, English Wheels, Power Hammers |
2011 |
Mittler Bros |
2700-24 |
Excellent |
sold |
Photo /
More Info. |
24" air power/planishing hammer: Mittler brothers 24" Pneumatic planishing hammer
includes foot pedal assy and stand &
assorted dies shown
like new condition |
|
Ad # 11581 | Shrinker/Stretchers, English Wheels, Power Hammers |
2010 |
Mittler Bros |
2700-24 |
Excellent |
sold |
Photo /
More Info. |
24" pneumatic plannishing hammer: 24" Planishing hammer w radius dies
pneumatic foot control
4600 hits per min
|
|
Ad # 11301 | Shrinker/Stretchers, English Wheels, Power Hammers |
|
Motorsports fabrication |
36" |
Very Good |
sold |
Photo /
More Info. |
36" throat: English Wheel
36" throat
20" work height
9" anvil
assorted dies shown |
|
Ad # 8217 | Shrinker/Stretchers, English Wheels, Power Hammers |
2002 |
Proline |
36" throat |
Excellent |
Sold |
Photo /
More Info. |
36" Proline Planishing Hammer: Air powered planishing hammer
cast iron frame
die rack
foot pedal
air regulator & lubricator
fine air control adj. knob
includes several dies shown |
|
Ad # 11295 | Shrinker/Stretchers, English Wheels, Power Hammers |
|
Proline |
|
Good |
sold |
Photo /
More Info. |
ProLine Planishing hammer: Proline planishing hammer
36" throat
set of dies-shown
roll around base
ProLine Planishing Hammers are designed for forming or planishing light gage sheet metal shapes. They can be used in numerous sheetmetal applications, including automobile and aircraft restoration, race car fabrication, sheetmetal stamping shops, etc
The lower arm on these cast iron floor models can be lowered to accommodate an optional bottom anvil for deep parts. Other special anvils are available, which allow the operator to move the lower arm off-center without losing position. They feature heavy duty pneumatic motors and sturdy cast iron frames.
Benefits:
•ProLine Planishing Hammers take the "work" out of metal work and saves the experienced metal man hours of time, leading to increased production.
•36" throat, cast iron construction.
•Lower arm drops down to extend depth to 18", with optional anvil for deep parts.
•Shown with optional die rack, dies & foot pedal extension.
•Ease of die changes.
Included:
•All parts are machined and assembled in-house for total quality control.
•Finest grade cast iron frame.
•Air regulator with lubricator.
•12-point Grade 8 bolts used throughout.
•Fine air control knob for easy operator adjustment.
•Made in the U.S.A.
•Special urethane cobalt blue paint.
•Electroless nickel plated parts.
•Optional die set available, made of S-7 tool steel, heat-treated and polished. |
|
Ad # 10219 | Shrinker/Stretchers, English Wheels, Power Hammers |
refurbed |
Pullmax |
P-5 |
Excellent |
Sold |
Photo /
More Info. |
Pullmax Power hammer #P-5: Pullmax P-5 Power hammer3/4" shank tooling
Movable lower die holder
some tooling shown
circle cutting acc.
machine upgraded -see below
|
|
Ad # 8561 | Shrinker/Stretchers, English Wheels, Power Hammers |
|
Pullmax |
P-21 |
Excellent |
Sold |
Photo /
More Info. |
: Pullmax P-21
Used Pullmax P21 Nibbling Machine
Throat 42"
Speed 1500 Strokes Per Minute
C/w Tooling
Dimension (LxWxH) 7' x 3' x 6'
Machine wThis is a Pullmax P21. The P21 is one of the best Pullmaxes available. It has variable speed, 7 position adjustable stroke and 4 position tool height. This makes it more controllable, allows it to give finer finishes and is more suitable for using Eckold type jaws. The throat is higher at 12" which allows bigger parts to be worked on. It uses 3/4 inch tooling
The throat is higher on a P21 than a normal Pullmax. Some of the tooling is longer to accomodate this, and some is the same length. Pullmax made two types of collet. One standard and one deep to allow use of short tooling on high throat machine.
|
|
Ad # 14701 | Shrinker/Stretchers, English Wheels, Power Hammers |
? |
Tatco |
TA-450EA-HD |
Good |
sold |
Photo /
More Info. |
36" throat dimpler/power hammer: TA-450EA-36"-HD (36" Frame)-hot ram coin dimpler
Tatco Stationary Hot Dimpler
36" throat
8" gap
temp: 0-800 deg F
dwell time: 0-30 sec
voltage of heater:110/1 & air
max force: at 90PSi :24,000lbs
max:set holder travel:1-3/4"
part of stroke at max.fore:final 3/16"
foot control
note:no dies/tooling included
note:was uused for working aluminum hot dimpler
meant for aircraft body panels
see link below for more info:
http://www.albertopetersen.com.ar/archivos/9475998
38usatco_air_tool_catalog_c_23___2012.pdf
|
|