Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8545 | Crimping, Beading & Flanging Machines |
2005 |
Birmingham |
L-20 |
Demo Machine |
Sold |
Photo /
More Info. |
20Ga. in 1 inch mtl..: 20 ga. capacity
5/16" width of hammer over edge adj up to 3/8"
25 ft per minute
1 hp
includes stand
optional rolls available- double seam, drive cleat, flange attach, right angle |
|
Ad # 14235 | Crimping, Beading & Flanging Machines |
|
|
|
Fair |
sold |
Photo /
More Info. |
Hand Cleat Bender, 20 Gauge mild steel x 30": Hand Cleat Bender
Capacity: 20 Ga Mild Steel (1.0mm)
Bend Length: 30" (762mm)
Cleat Depth:.500" (12.7mm)
|
|
Ad # 9702 | Crimping, Beading & Flanging Machines |
2002 |
Birmingham |
L-20 |
Very Good |
sold |
No Photo /
More Info. |
: Model L-20 Features:
• All steel forming head
• Hardened and ground shafts
• Case hardened steel forming rolls
• Machine cut gears
• Needle roller bearings
Capacity: 20 gauge (.036") max to 24 gauge
(.024") min.
Uses approximately 1 inch of metal to form
pittsburgh type lock.
Pocket Depth: 5/6" width of hammer-over edge,
adjusts to 3/8"
Speed: 25 feet per minute
Motor: 1 H.P. 110 volt, single phase, V-belt
drive
Stand: Arc welded steel
|
|
Ad # 10588 | Crimping, Beading & Flanging Machines |
1977 |
Blue Valley |
9-227 |
Good |
sold |
Photo /
More Info. |
1" thick Mtl capacity: Head Knuckling flanger
main drive motor 50hp 575 vlts 3 phs. 1650 rpm
hyd. unit 5hp-- 575 vlt 3phs. 1750 rpm
tooli1"r,2"r,2 3/4 r, 3 1/2r,4 1/2 r,5r, 5 3/4 r,6r,7 1/4 r,8r,10r,12r,14r
small head adapter included
chamfer cutting att. included
1" thick Mtl capacit
tooling each worth 4-6k each |
|
Ad # 12631 | Crimping, Beading & Flanging Machines |
|
Engel |
2007 |
Good |
sold |
Photo /
More Info. |
20g pittsbutgh: ENGEL “ High Speed “ 20 GA PITTSBUTGH Machine. 2007
Model - 220 / 440 Volt 3 PHASE……. In excellent
shape, has optional complete Grease package…….. |
|
Ad # 11010 | Crimping, Beading & Flanging Machines |
|
Engineering & Research& R |
HD |
Good |
Sold |
Photo /
More Info. |
metal former: former
vari speed drive upgraded |
|
Ad # 7001 | Crimping, Beading & Flanging Machines |
|
Flagler |
22 Slip &Drive |
Good |
sold |
Photo /
More Info. |
: Slip & drive machine |
|
Ad # 9273 | Crimping, Beading & Flanging Machines |
1998 |
Flagler |
20 Ga Standard |
Good |
SOLD |
Photo /
More Info. |
20 Gauge: This is a clean machine that was tested prior to removal prior to storage. ... |
|
Ad # 8577 | Crimping, Beading & Flanging Machines |
196? |
INGELS ELBOW MACHINE |
100 H MANUAL |
Very Good |
sold |
Photo /
More Info. |
: GREAT CONDITION.. LOTS OF TOOLING |
|
Ad # 11736 | Crimping, Beading & Flanging Machines |
|
Irvin Smith |
24" |
Good |
sold |
Photo /
More Info. |
24" bead roller: Irvin smith bead roller
24" throat
stand
no dies included |
|
Ad # 14232 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
Pittsburgh Machine |
Fair |
SOLD |
Photo /
More Info. |
20 Gauge: Lockfomer Pittsburgh Machine
Capacity: 20 Gauge
Electrical: 110/ 1 phase |
|
Ad # 8526 | Crimping, Beading & Flanging Machines |
|
Lockformer |
22GA |
Good |
sold |
Photo /
More Info. |
22GA: 22Ga.
Pittsburg Hem/ pipe lock flanger |
|
Ad # 14217 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
22 |
Fair |
sold |
Photo /
More Info. |
22 Gauge: Lockformer Pittsburgh Machine with Flanger
Model: 22
Capacity: 22 Gauge
Electrical: 110/220/1 phase
|
|
Ad # 12632 | Crimping, Beading & Flanging Machines |
1985 |
Lockformer |
20ga |
Good |
sold |
Photo /
More Info. |
20GA Pittsburg Machine: LOCKFORMER “ High Speed “ 20 GA PITTSBURGH Machine.
1985 Model – 220 Volt 3 PHASE.. In excellent shape |
|
Ad # 8475 | Crimping, Beading & Flanging Machines |
|
Lockformer |
Flanger 20Ga |
Very Good |
Sold |
Photo /
More Info. |
16 Ga & 20 Ga.: Pittsburg type-Seamer & Auto flanger machines Set -2 machines:
Auto flanger is 16Ga. capacity
Seamer is 20 Ga.
|
|
Ad # 14213 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
Cleatformer |
Fair |
sold |
Photo /
More Info. |
22 Gauge: Lockformer
Model: Cleatformer
Capacity: 22 Gauge
Electrical: 230/3 phase
Rollformer "S" & Drive Cleat Rolls
Slitting Attachment For "S" Cleats
Slitting Roll For Drive Cleats
Male Snaplock / Button Lock Rollformer |
|
Ad # 9388 | Crimping, Beading & Flanging Machines |
|
Lockformer |
24S |
Very Good |
sold |
No Photo /
More Info. |
24 in throat: Specifically designed for the sheet metal shop,
this simple, rugged, cast-iron
body design will handle virtually any cutting
job. Three blade speeds (100, 600
and 3000 fpm) cut just about any material
smoothly, accurately and quickly,
even on complicated patterns, whether run through
singly or stacked an inch high.
There’s no lead-off; the blade won’t twist — even
small radius cuts — and work
is easy to back out. Other enhanced features
include a full 24" throat and three
14" wheels instead of the typical 24" or 26" two-
wheel layout. As a result, you can
cut a 4-foot-wide piece of material right down
the center.
-------------------------------------------------
-------------------------------
Features
-Full 24" throat
-Three 14" wheels
-Three blade speeds
|
|
Ad # 14234 | Crimping, Beading & Flanging Machines |
|
Lockformer |
Outside Tap Machine |
Fair |
sold |
Photo /
More Info. |
26 Gauge Outside Tap Machine: Lockformer Outside Tap Machine
Capacity: 26 Gauge
Electrical: 220/3 phase |
|
Ad # 14219 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
|
Fair |
sold |
Photo /
More Info. |
60" x 16 Gauge: Lockformer Bead Roller with Drop table
Capacity: 60" x 16 Gauge
Electrical: 220/110/1 phase |
|
Ad # 12106 | Crimping, Beading & Flanging Machines |
|
Lockformer |
18ga |
Good |
sold |
Photo /
More Info. |
18ga: Pittsburg/Acme-combination machine
18ga max cap
2 available |
|
Ad # 14220 | Crimping, Beading & Flanging Machines |
? |
Lockformer |
16 |
Fair |
sold |
Photo /
More Info. |
16 Gauge: Lockformer Pittsburgh Snaplock Machine
Capacity: 16 Gauge
Electrical: 220/ 3 phase
|
|
Ad # 12390 | Crimping, Beading & Flanging Machines |
|
lockformer |
Pittsburg 18 |
Good |
sold |
Photo /
More Info. |
18 ga: Lockformer Pittsburg 18
18 GA |
|
Ad # 12100 | Crimping, Beading & Flanging Machines |
|
Lockformer/maplewood |
elbow combination machine |
Good |
sold |
Photo /
More Info. |
elbow combination machine 10ga cap: Lockformer/maplewood combination Elbow machine
10ga max capacity
22" throat
cuts elbows in duct work
lots of tooling included
foot pedal control
30k new |
|
Ad # 10059 | Crimping, Beading & Flanging Machines |
2008 |
Mittler Brothers |
200-36 |
Demo Machine |
Sold |
Photo /
More Info. |
36" throat w/ stand: 36" throat
foot switch
stand
3 sets of dies
will handle up to 0.040" mild steel & 0.50 aluminium |
|
Ad # 6998 | Crimping, Beading & Flanging Machines |
|
New Dimension |
BR50478 |
Excellent |
sold |
Photo /
More Info. |
: This machine will put 5 beads on 5' wide sheets -
stiffens material. |
|
Ad # 7002 | Crimping, Beading & Flanging Machines |
|
Niagra |
Power Crimper:180 |
Good |
sold |
Photo /
More Info. |
Power Crimper-12 ga: This one horsepower machine is used to crimp duct ends--
machine has multiple dies -approx: dozen or so
Specification Description
Capacity:
Slitting 12 Ga.
Circle Cutting 12 Ga.
Flanging 14 Ga.
Crimping- Beading 16 Ga.
Circle Cutting Diameter 6"- 18"
Flanging Diameter 13"- 48"
Shaft Size 1 7/8"
Distance Between Shaft Centers 3"
Throat Depth 12"
Roll Speed 15 FPM
Dimensions (L x W x H) 42" x 24" x 64"
Weight 1,200 Lbs.
|
|
Ad # 4259 | Crimping, Beading & Flanging Machines |
|
Pittsburg |
16-GA |
Good |
Sold |
Photo /
More Info. |
Heavy Duty 16 ga. LOCKFORMER: Capacity: 16 ga.
Includes a Pipe Lock Acc. |
|
Ad # 11064 | Crimping, Beading & Flanging Machines |
|
Pittsburg |
TR1-4458 |
Good |
Sold |
Photo /
More Info. |
Lockformer 22GA: |
|
Ad # 11170 | Crimping, Beading & Flanging Machines |
1973 |
Potter & Rayfield |
type 1510-120 |
Very Good |
sold |
Photo /
More Info. |
Air opereated electric coil winder-Spreader: air powered wire coil spreader
120" bed
direct reading scales 0-150"
P & R compensating mechanism
increased capacity-loop length, slot length, spread, including angle and coil cross section
powerful air coil holders
air actuated spreader mechanism
coil holders air swivel to desired angles
power air operated knuckle kickups
ease of adjustment
Machine used to wind coils for electric motors |
|
Ad # 12634 | Crimping, Beading & Flanging Machines |
2007 |
RAMS |
20GA |
Good |
sold |
Photo /
More Info. |
Duct Flanger: RAMS 20 GA Power Duct FLANGER . 2007
Model…………………………….…. 120 Volt single |
|
Ad # 14773 | Crimping, Beading & Flanging Machines |
1998? |
Roper Whitney |
3617 |
Good |
sold |
Photo /
More Info. |
18ga rotary former: Roper Whitney 3617 powered beading/crimper former
Model: 3617
Capacity: 18 Gauge
Throat: 13"
Distance Between Ctrs: 3"
Roll Speed: 40 RPM
Motor: 3/4 HP, 230 or 460 Volt, 3 Phase
Weight: 475 lbs.
* Versatile machine designed for deep
throat
(Up to 13")beading crimping, and other roll
operations.
* Up to 18 gauge material. Back-geared,
with
steel horn, bronze bushed bearing and 1-
piece
frame. Mounted on floor stand w/
adjustable
motor
mount, "V" belt drive, and 3/4 H.P. geared
head
motor.
* Unit includes gauges and spacing
collars
for
all operations except flanging. Rolls
ordered
separately.
ROLL SETS ARE ALL SOLD SEPARATELY-one
included
as shown
|
|
Ad # 14283 | Crimping, Beading & Flanging Machines |
|
Roto Die |
15 |
Good |
sold |
Photo /
More Info. |
120" x 14 gauge mild Steel, or 16 gauge Stainless Steel: Roto Die Hydraulic Press Brake
Model: 15
Capacity: 10' x 14 gauge mild steel,
10' x 16 gauge stainless steel
Motor 15 HP
Length of Stroke 3"
Strokes / Minute 20 to 50
Die Clearance 2-1/8"
Die Space 7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with
indicators,
length-of-stroke adjustment.
|
|
Ad # 14393 | Crimping, Beading & Flanging Machines |
? |
Roto Die |
10 |
Fair |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 14166 | Crimping, Beading & Flanging Machines |
? |
Roto Die |
10 |
Excellent |
sold |
Photo /
More Info. |
10ft x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge max
6ft. x 10 Gauge max
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is
equipped
with
depth-of-stroke adjustment with
indicators,
length-of-stroke adjustment. |
|