Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11760 | Gear Shapers |
|
Fellows |
645A |
Good |
sold |
Photo /
More Info. |
18" external: Fellows 645A Gear Shaper
MACHINE SPECIFICATIONS:
*Max. Pitch Diameter External 18"
*Max. Pitch Diameter Internal 18"
*Max. Face Width External 5"
*Max. Face Width Internal 5"
*Max. Diametric Pitch
- for Spur Gear 3/4
- for Helical Gears 3/4
*Machine Dimensions 5'3" x 4' x 6'5" High
*Machine Weight 6,800 Lbs.
MACHINE EQUIPPED WITH:
*0" Riser
*5 7/8" Spindle Bore
*5" Stroke
*Hollow Spindle
*Spur Guide
*220V
|
|
Ad # 1354 | Gear Shapers |
|
PAMA |
DMA-805-S |
Good |
Sold |
Photo /
More Info. |
PAMA GEAR SHAPER: Just arrived - in great shape
MORE DETAILS TO FOLLOW |
|
Ad # 13445 | Gear Shapers |
1975 |
Fellows |
10-2 |
Good |
sold |
Photo /
More Info. |
10" dia: Fellows Model 10-2 Gear Shaper
10" Max Diameter
2" Max Stroke
3'' Riser
4 DP
vari-speed stroke: 210-1260 / 105-630
Cutting Aerospace parts, tight tolerances!
Under Power for limited time & priced for quick removal !
MACHINE SPECIFICATIONS:
* Max pitch diameter (External)-10"
* Max pitch diameter (Internal)-10"
* Max face width, external & internal- 2"
* Max diametrical pitch spur- 4 DP
* Max diametrical pitch helical- 5 DP
* Bore through work spindle- 5.875"
* Cutter spindle diameter- 3.543"
*Distance between work table & cutter spindle 15"
* Max. OD of fixture- 19"
* Dimensions (L x H x W)- 91"x 97"x 60"
* Machine net weight, approx.- 13,000 lbs.
Machine Equipped With:
* 3 Cut
* Cutter at top
* 3 Inch riser
* Misc Change Gears
|
|
Ad # 10511 | Gear Shapers |
|
Teledyne-Landis |
32 TFRG |
Good |
sold |
Photo /
More Info. |
Teledyne-Landis Model 32TFRG, Gear Roll Finish Machin: #32TFRG TELEDYNE-LANDIS GEAR ROLL FINISHING MACHINE
Serial No. 32-TFRG-82, Model 32TFRG,
EQUIPPED WITH:
Fixturing
Vickers Hydraulics
CATALOGUE SPECIFICATIONS:
Rolling Force Capacity, Maximum 42000 LBS
Capacity Helical Gears With Automatic Multiple Revolving Turret Fixture, Diameter 2.5" (64MM)
Capacity Helical Gears With Automatic Single-Station Roll Over Fixture, Diameter 5" (127MM)
Capacity Helical Gears With Semi-Automatic Single-Station Fixture With Manual Load, Diameter 5" (127MM)
Production Rate Variable 6 to 15 PPM
NOTE: This Machine Is Designed To Meet Exacting Finish
Gear Specifications And Will Roll-Finish To Overall
Gear Tolerances. Machine Can Be Easily Incorporated
Into An Automated Line To Produce Gears For Many Applications
|
|
Ad # 10511 | Gear Shapers |
|
Teledyne-Landis |
32 TFRG |
Good |
sold |
Photo /
More Info. |
Teledyne-Landis Model 32TFRG, Gear Roll Finish Machin: #32TFRG TELEDYNE-LANDIS GEAR ROLL FINISHING MACHINE
Serial No. 32-TFRG-82, Model 32TFRG,
EQUIPPED WITH:
Fixturing
Vickers Hydraulics
CATALOGUE SPECIFICATIONS:
Rolling Force Capacity, Maximum 42000 LBS
Capacity Helical Gears With Automatic Multiple Revolving Turret Fixture, Diameter 2.5" (64MM)
Capacity Helical Gears With Automatic Single-Station Roll Over Fixture, Diameter 5" (127MM)
Capacity Helical Gears With Semi-Automatic Single-Station Fixture With Manual Load, Diameter 5" (127MM)
Production Rate Variable 6 to 15 PPM
NOTE: This Machine Is Designed To Meet Exacting Finish
Gear Specifications And Will Roll-Finish To Overall
Gear Tolerances. Machine Can Be Easily Incorporated
Into An Automated Line To Produce Gears For Many Applications
|
|
Ad # 10489 | Gear Shapers |
|
ITW |
2901-108 |
Good |
sold |
No Photo /
More Info. |
ITW Model 2901-108, Gear Burnisher : ITW
Model 2901-108 Automatic Gear Burnishing
S/N #12277
Best Use
For burnishing external gears, spur or helical, from 20 - 75mm in size. Removes or reduces nicks and burrs while improving surface finish. Used instead of honing and finish grinding when process calls only for nick and burr removal. Designed for symmetrical gears which can be rolled on the major diameter.
Function
Gears are rolled into and rolled out of machine. Gears are captured between three burnishing tools and rolled while the work piece is oscillated parallel with the tooling. Area is flooded with coolant. Work piece bore and tooling dies bore are parallel and in the horizontal (H) plane.
Advantages
High speed, process improvement, long tool life (500,000 - 750,000 cycles).
For use with 1-3" Gears
|
|
Ad # 9405 | Gear Shapers |
|
PICCO |
K15 Gear Tooth Chamfering & Ro |
Good |
sold |
Photo /
More Info. |
Max gear diameter 23.6": Max gear pitch 1.6DP
Max gear diameter 23.6"
Cutter spindle speed 1450/2100/2800rpm
Range of number of teeth in work piece 10-88
Tilt of work piece spindle +20/-25 deg
Cutter spindle motor 1.5 HP
Work piece motor 1.5 HP
Complete Set of Index Chnage Gears for setting number of teeth in work piece
Coolant System
Controls for Manual & Full Automatic Operation
Single Cam for Radius, Cusp or Tangential Pointing of Internal & External Gears
Work Piece Positioning Device
Foot Actuated Work Piece Clamping
Operator's Manual, Parts List
|
|
Ad # 9417 | Gear Shapers |
|
Gleason |
14 Bevel Gear Generator |
Good |
Sold |
Photo /
More Info. |
Max cone distance (2.75"-3.5") 12": Max cone distance (2.75"-3.5") 12"
Max cone distance (1" face) 11.125"
Min cone distance 0"
Max pitch angle (90 degree shafts)84deg/18min
Min pitch angles 5 deg/42min
Max ratio 10/1
Max pitch diameter (see table)
Max face width 3.5"
Diameter of hole in work spindle (large end) 3.906"
Diameter of spindle thru-hole 3.063"
Hydraulic Work Chucking Cylinder, w/Draw-In Bar & Nuts
Stock Dividing Gauge
Upper & Lower Tool Setting Gauge w/Proof Block
Cutter Length Gauge
Standard Tool-Holders
Extended Tool-Holders
Tool & Gear Cabinet w/Good Assortment of Change Gears
|
|
Ad # 9400 | Gear Shapers |
|
Gleason |
12 Straight Bevel |
Good |
sold |
Photo /
More Info. |
Max cone distance (2.75"-3.5") 12": GLEASON MODEL 12 STRAIGHT BEVEL GEAR GENERATOR
Max cone distance (2.75"-3.5") 12"
Max cone distance (1" face) 10.5"
Min cone distance 0"
Max pitch angle (angular gears) 90 degrees
Min pitch angles 5 deg/18min
Max ratio 10/1
Max pitch diameter 24"
Max face width 3.5"
Max pitch (nominal) 3DP
Diameter of hole in work spindle (large end) 2.292"
Diameter of hole through spindle 3.06"
Manual Work Chucking
Upper & Lower Setting Gage w/Proof Block
Standard Feed Cam G12W-1038A
One (1) Set of Standard Tool Blocks
Change Gears w/Tool & Gear Cabinet
Roughing Yoke & Bushing
Self Contained Coolant System
|
|
Ad # 9372 | Gear Shapers |
|
Fellows |
10-2 |
Good |
sold |
Photo /
More Info. |
10" Diameter: Max pitch diameter, external 10"
Max pitch diameter, internal 10"
Max diameteral pitch spur 4DP
Max diameteral pitch helical 5DP
Min helix angle (w/proper guides)45 degrees
Max face width 2"
Max O.D. of work & fixture 19"
Max distance between table surface and bottom of cutter spindle, w/cutter ram in exterme upward position 10"
Max distance centerline of cutter spindle to work spindle centerline 9.055"
Standard Straight Spur Guide
Single Speed 5 HP main Motor w/3-Step Sheaves for Stroke Speed Variation (400-800, 450-900, 500-1000 strokes/min.)
One, Two, or Three Cut Dial Selection
Hydraulic Servo-Controlles Infinitely Variable Depth Feed
Hydraulic Fixture Clamping in Work Spindle
Assortment of Change Gears
Standard Sub-Base Height
|
|
Ad # 6024 | Gear Shapers |
|
SAMPUTENSILLI |
SCT-3 |
Good |
sold |
Photo /
More Info. |
SAMPUTENSILLI Model SCT-3 Gear Chamfer Machines: AB Panelview 900
The Samputensili Chamferer and Deburrer is a universal
style machine for shafts and gears.
SPECIFICATIONS:
Max. Workpiece Diameter .98"-13.78"
Max. Module 3.175 DP
Face Width Range .157"-4.134"
Max. Workpiece Length
- with gearing in center of workpiece 29.53"
- with gearing at one end of workpiece 19.69"
Tool Spindle drive Output, Approx. 2 HP
Total Connected Load of Machine 5-8 HP
Compressed Air Pressure 5 Bar
Compressed Air Consumption, approx. 50-70 l/min.
|
|
Ad # 7616 | Gear Shapers |
1960's |
Fellows |
# 6 |
Fair |
sold |
Photo /
More Info. |
Fellows # 6 Gear Shaper: Capacity:
18" diameter
Stroke: 6" (Needs verification)
copy of manual and gear change chart available
will sell both machines as a pkg. deal |
|
Ad # 11182 | Gear Shapers |
? |
Fellows |
# 6 |
Good |
sold |
Photo /
More Info. |
Fellows # 6: fellows # 6 gear shaper
has some change gears included as shown'
Holds good tolerances
has copy of manual and change gear chart included
2 machines availiable (this is the better of the 2) but will sell as a pkg see ad # 7616 |
|
Ad # 9262 | Gear Shapers |
1950 |
Fellows |
#7 |
Good |
Sold |
Photo /
More Info. |
#7: Gears as pictured, miscellaneous cutters included,
Quiet as a sewing machine and smooth as silk.
Will cut a 7" gear using a 3" cutter. Under power, must see. |
|