Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 3106 | RAM / Conventional EDM Machines |
|
Eltee Pulsitron |
|
Good |
SOLD |
No Photo /
More Info. |
Eltee Pulsitron EDM Machine: Tank capcity 55 Gal/209 litres, Travels:x-8", Y-6", Z-12" Maximum quill cle... |
|
Ad # 12386 | RAM / Conventional EDM Machines |
|
Easco Sparcatron |
|
Good |
sold |
Photo /
More Info. |
6" x 12": Eascatron Sparcatron
6" x 12" x 10" Travels
Futaba DRO
Votlage 440
|
|
Ad # 4442 | RAM / Conventional EDM Machines |
|
ELOX |
12-6636 |
Very Good |
Sold |
Photo /
More Info. |
66" x 36" ELOX SINKER EDM: MACHINE DETAILS:
Table Size: 66" x 36"
Tank Size: 70" x 40" x 24"
Dielectric Height: 18"
Travels:
X: 35"
Y: 15"
Z: 12"
Pneumatically Balanced (Twin Cylinders)
Distance Table/Platten: 32"
Platten Size: 14" x 12"
Hydraulic Servo in Z-Axis
Flat Ways throughout
Machine Only Dimensions: 80" x 100" x 115"
GENERATOR DETAILS:
Type Astra MKII 50S (a later retrofit)
Power: 50 Amp (peak)
Controls include: On Time, Off Time, Polarity, power, sevo feeds, servo sensitivity, dither, pick up etc etc
Generator Dimensions; 30" x 66" x 72"
FILTER DETAILS:
Double Paper Filter Cartriges Integrated into the machine.
Seperate flushing line fine filter unit |
|
Ad # 5612 | RAM / Conventional EDM Machines |
|
Hansvedt/South Bend |
150-B |
Very Good |
SOLD |
Photo /
More Info. |
Single Phase (110-V) 8" x 6" x 6" Table Top EDM: Travels:
X: 8"
Y: 6"
Z: 6"
Work Tank Size: 13" x 20" x 13 h
Work Table: 9" x 15"
Platen Size: 5" x 13-1/2"
Throat: 16" max. - 10" min.
Ram Pulser Unit (Timer)
Coolant Reservoir: 30 gallon (on Castors)
Filter: 5 micron Filter Quality
Coolant Pressure: 0 - 70 lbs adjustable
Generator: Pulse or Capacitor
Duty Cycle: 5% to 95% |
|
Ad # 2726 | RAM / Conventional EDM Machines |
1985 |
Elox |
18-6636 CNC |
Good |
SOLD |
Photo /
More Info. |
Elox EDM - RAM Type CNC: Table Size: X = 66 Y = 36 Z = 28
Travels: X = 36 Y = 15 Z = 18
50 Amp,Filter system,DC Servo motors,RS232 Port
Remote hand unit,10,000 table cap.
Bridge type system with the Y and Z axes on the bridge above the workpan.
DC drives on all three axes for automatic and simultaneous EDMing in any direction, orbital programming control in three planes, reciprocation on any axis in both directions and selectable inch or metric dimensioning.
Schneeberger-Type antifriction roller bearings for sensitive and accurate movements on the X, Y, & Z axes. Table movement is numerically controlled with a variety of table travels. All 3 axes use a DC motor driven recirculating ball leadscrew with pulse coder feedback. The CNC controller will execute program blocks of information from 3 possible sources; non-volatile bubble memory in MEM mode, paper or mylar tape in TAPE mode, or from manual instructions entered by operator on keyboard MDI mode. |
|
Ad # 4441 | RAM / Conventional EDM Machines |
|
ELOX |
18.6636 |
Very Good |
Sold |
Photo /
More Info. |
66" x 36" ELOX CNC SINKER EDM: MACHINE DETAILS:
Table Size: 66" x 36"
Tank Size: 70" x 40" x 24"
Dielectric Height: 18"
Travels:
X: 35"
Y: 15"
Z: 18"
Z-Axis Pneumatically Balanced (Twin Cylinders)
Distance Table/Platten: 36"
Platten Size: 14" x 12"
Machine Only Dimensions: 80" x 100" x 130"
CONTROL DETAILS:
Type: GN 6 Series with touch screen menu for all EDM parameter Inputs
GENERATOR DETAILS:
Type M0II, B50S
Power: 50 Amp (peak)
Control/Generator Dimensions; 60" x 50" 66"
FILTER DETAILS:
Double Paper Filter Cartriges
Filter Unit Only Dimensions: 7' x 8.5' x 6'
|
|
Ad # 6910 | RAM / Conventional EDM Machines |
1992 |
CHARMILLES |
2-LC |
Very Good |
SOLD |
Photo /
More Info. |
50 AMP CHARMILLES ELECTRICAL DISCHARGE MACHINE: 50 AMP CHARMILLES ELECTRICAL DISCHARGE MACHINE
AREA OF TABLE ........................... 19-3/4΄΄ X 14΄΄
AREA OF RAM ............................. 9-1/4΄΄ X 6΄΄
AREA OF TANK ............................ 32΄΄ X 20΄΄ X 12΄΄
DISTANCE BETWEEN TABLE & MACHINING HEAD . 6΄΄ MIN. TO 21-1/2΄΄ MAX
MAXIMUM WEIGHT OF WORK PIECE ............ 1250 LBS
MAXIMUM ELECTRODE WEIGHT ................ 130 LBS
LONGITUDINAL TABLE TRAVEL ............... 12΄΄
CROSS TABLE TRAVEL ...................... 8΄΄
RAM TRAVEL .............................. 8΄΄
7 KVA CHARMILLES - EROWA ISOCUT SYSTEM
50 AMPS POWER SUPPLY
3 AXIS SONY DIGITAL READOUTS
COOLANT |
|
Ad # 10261 | RAM / Conventional EDM Machines |
84 |
Sodick/Inova |
22-nc |
Good |
sold |
Photo /
More Info. |
40 amp 300v 6x12 chuck : 24x14x18 tank
sodick 8100 control |
|
Ad # 6699 | RAM / Conventional EDM Machines |
1996 |
OMEGA |
405-D |
Excellent |
Sold |
Photo /
More Info. |
OMEGA 405-D CNC Ram type EDM Machine: OMEGA 405-D CNC Ram type EDM Machine
Work table size 17.7 x 9.8
Work tank internal dimensions 32.7 x17.7 x 11
Fluid level adjusting range 5.7-11.4
X-axis travel 9.8
Y-axis travel 5.9
Z-axis travel 8.6
Distance from top of work table to surface of electrode holder 17.3
Electrode holder dimensions 5.5 x 5.5
Distance from floor to work table top 34
Z axis servo mode DC Servo
Max. weight of electrode 110 lbs
Max. weight of work piece 1100 lbs
Dielectric tank capacity 500 liters
Max. machining current 30 amps
EQUIPPED WITH:
2- paper core fluid filtration mode
Submersive type tank
Electrode holder
Head depth measuring device
Sparkmaster Micro-computer current
pulse generator control
Input total power 4 KVA |
|
Ad # 12387 | RAM / Conventional EDM Machines |
|
Elox Astra 50s |
50s Royale |
Good |
sold |
Photo /
More Info. |
12" x 20": Elox Astra 50s
12" x 20" x 10"
41 KVA
Voltage 440/3 Phase |
|
Ad # 5024 | RAM / Conventional EDM Machines |
1988 |
Agie |
Agietron 100 |
Excellent |
Sold |
Photo /
More Info. |
Agietron 100 CNC EDM with ATC and Drop Tank: Agietron 100 with Drop Tank comprising:
Agiepulse Generator: 60 Amp
Dielectric Unit: DA 200 with Remcor chiller Unit
ATC: 14 Station
C-Axis: Integrated
Tank Size: 31.5" x 20.25" x 12.6" high
Table Size: 23" x 19"
Travels:
X = 13.8"
Y = 9.84"
Z = 13.8"
Table/Spindle Nose Distance: 5.1"/18.9"
Max. Workpiece Size:
30.7" x 19.7" x 8.66" high
Max. Electrode Weight: 440 lb
Max. Workpiece Weight: 1,320 lb
C-Axis:
Rotation Speed: 0 - 40 rpm
Dielecrtic Capacity: 1,000 litres
Number of Flushing Connections: 7 |
|
Ad # 13611 | RAM / Conventional EDM Machines |
|
Elox |
Astra 50s MKII |
Good |
sold |
Photo /
More Info. |
8" x 20" x 12": Elox Royale-sinker type edm
Astra 50s Mk II
20 KVa
Travels
8" x 20" x 12"
System 3R
lots of 3R Tooling to go with it
Jig in machine does not go with |
|
Ad # 5094 | RAM / Conventional EDM Machines |
1993 |
Hansvedt |
Benchman |
Very Good |
SOLD |
Photo /
More Info. |
"Benchman" EDM Machine: SPECIFICATIONS
TABLE SIZE -------------------------------- 9" X 14"
X AXIS TABLE TRAVEL ----------------------- 8-1/2"
Y AXIS TABLE TRAVEL ----------------------- 5-1/2"
Z AXIS HEAD TRAVEL ------------------------ 8.2"
POWER SUPPLY ------------------------------ 30 AMP
MAX ELECTRODE WEIGHT ---------------------- 66 LBS
MAX WORKPIECE WEIGHT ---------------------- 220 LBS
VOLTAGE ----------------------------------- 115 VOLT, 1 PHASE
--------------------------------------------------------------------------------
EQUIPPED WITH
- PULSE 201E 30 AMP POWER SUPPLY
- 3R TOOLING SYSTEM WITH SINGLE COLLET
- ANILAM EDM 3-AXIS DIGITAL READOUT
--------------------------------------------------------------------------------
|
|
Ad # 9827 | RAM / Conventional EDM Machines |
1995 |
CREATIVE |
CR-3 |
Excellent |
SOLD |
Photo /
More Info. |
30 AMP: Very low hours, Very Clean. 3 Axis DRO with Auto Fire
Extinguisher. One owner. |
|
Ad # 6585 | RAM / Conventional EDM Machines |
1994 |
HANSVEDT |
CS-20 Tradesman |
Excellent |
Sold |
Photo /
More Info. |
HANSVEDT EDM, Model CS-20 Tradesman w/Gromax COC-200A III CNC Orbitor: HANSVEDT Conventional Ram Type EDM, Model CS-20 Tradesman w/Gromax Mode... |
|
Ad # 9316 | RAM / Conventional EDM Machines |
1990 |
Deckel |
DE 10 centerCNC/ Multiform 1 |
Very Good |
Sold |
Photo /
More Info. |
14"x 10" table: Has a Multiform 1 Control 3 axis with a rotating spindle feature
X 220 Y 170 Z 250 - Table 350 x 240 mm
3R-System-Head - 30A-Power
Catalog Specifications-verify below
Travel
X 8.5
Y 6.5
Z 10
Clearance table to quill 19.3 9.4
Clamping surface 13.7 x 9.4
Max. table load 440 lbs
Internal dimensions 19.6 x 14.75 x 10
Max. filling level 9
Max. workpiece height 7.5
Max. electrode weight 110 lbs
Rapid traverse 29.9
Creep feed rate .3
Max. cutting current 45A
Ignition voltage 150/180/220
Pulse duration 1-3.000
Pulse interval 1-500
has orbiting cycle
no tool changer can be added
has manuals
has less than 3865 hrs on machine
Has self cleaning filtering system
Approximate weight of machine 1400 lbs
|
|
Ad # 6889 | RAM / Conventional EDM Machines |
1989 |
Chevalier |
DM-323 |
Good |
Sold |
Photo /
More Info. |
EDM, Chevalier, DM-323 Conventional, Ram Type, Sinker: Sokki DU1003 3-Axis DRO
20 Amp Power supply
29.5" x 18.9" x 11.8" Tank Dimensions
19.7" x 11.8" Work Table
11.8" x 7.9" X-Y Travels
1,100 lbs Max. Workpiece Weight
7.9" Quill Stroke
20.9" Distance from table to electrode holder plate
132 lbs. Maximum electrode load
Anti-arc device
Auto fire extinguisher
Pulse-pressure-vacuum flushing
Micrometer depth gauge
Worklight
5,719 Hours of Work Time |
|
Ad # 15676 | RAM / Conventional EDM Machines |
2015 |
Makino |
EDAF3 |
Excellent |
sold |
Photo /
More Info. |
17.7" x 13.8" x 13.8": Makino EDAF3 CNC Ram EDM
2015 MODEL
TOTAL RUN HOURS 249
SPECIFICATIONS:
TABLE SIZE.................. 27.5" X 19.7"
MAX. PAYLOAD................ 1,764 LBS
X-AXIS...................... 17.7"
Y-AXIS...................... 13.8"
Z-AXIS...................... 13.8"
TANK SIZE................... 33.46" X 25.6" X 15.75"
DROP TANK................... YES
MAX. ELECTRODE WEIGHT....... 165 LBS
APPROX. FOOTPRINT........... 59.1" X 102.4" X 100.8"
EQUIPPED WITH:
16 POSITION AUTOMATIC TOOL CHANGER
SYSTEM 3R CHUCK
CARBIDE CIRCUIT
PROGAMMABLE C-AXIS
FLAME SENSOR
Tooling valued at 20k included.
|
|
Ad # 11868 | RAM / Conventional EDM Machines |
1996 |
Aratron |
EDM 600 |
Excellent |
sold |
Photo /
More Info. |
: Excellent machine in excellent condition! Digital X,
Y,
and Z readout. Magnetic chuck. System 3R mag. head. |
|
Ad # 10305 | RAM / Conventional EDM Machines |
1990 |
Charmilles |
Form 20 |
Good |
Sold |
Photo /
More Info. |
30 AMP: 2 available-
Charmilles FORM 20
EDM machines with ISOCUT and (chiller??)
30amp
around 600hrs each
Are under power |
|
Ad # 7488 | RAM / Conventional EDM Machines |
1996 |
Agie Mondo |
Futura III |
Excellent |
Sold |
Photo /
More Info. |
1996 Agie Mondo Futura III: Amp
15" x 12" x 8.5" Travels
Oversize Tank
Hi POL
Floppy
Low Hours
Excellent Condition
Under Power!!!
Full Machine Specifications
40 AMP
X =15.0", Y=12.0", Z=8.5" (Approx)
Special Options Include
Oversize tank for large jobs or multiple set-ups
Hi POL
Floppy Disc Reader
Equipped With 3R ttoling and Haas Index Head which
are available, but not included in the price
Low hours, well maintained |
|
Ad # 6463 | RAM / Conventional EDM Machines |
|
EASCO |
GEMINI II |
Good |
sold |
Photo /
More Info. |
EASCO GEMINI II EDM MACHINE: EASCO GEMINI II EDM MACHINE:
RAM FACES ...................... (2) 6΄΄ X 11
΄΄
SIZE OF TANKS .................. (2) 24΄΄ X 38
΄΄
AREA OF TABLE (T SLOTTED) ...... 30΄΄ X 20΄΄
RAM TRAVEL ..................... 12΄΄
ADJUSTABLE CROSS RAM TRAVEL .... 16΄΄
TABLE TRAVEL (IN/OUT) .......... 12΄΄
RAM FEEDS (SERVO) .............. FINE & COURSE
POWER SUPPLY ................... SPARCATRON 4
POSITION
SERIAL ......................... 10D904/8
MODEL .......................... SPEC 10D/1001
POWER SUPPLY OUTPUT ............ 34 KVA
HOUR ON MACHINE ................ 4391 |
|
Ad # 11093 | RAM / Conventional EDM Machines |
2004 |
Charmilles |
HD 20 |
Very Good |
sold |
Photo /
More Info. |
small hole driller: Nice Looking and Fully Functional Charmilles HD20 EDM Drilling Machine. St... |
|
Ad # 13098 | RAM / Conventional EDM Machines |
2000 |
CHARMILLES |
HD20 |
Good |
sold |
Photo /
More Info. |
HD20 3.5 KVA x=13.7" y=9.8" z=13.3" : 2000 CHARMILLES HD 20
HD20 3.5 KVA x=13.7" y=9.8" z=13.3"
EDM MACHINE WITH ISOPULSE TYPE POWER SOURCE 3.5KVA
photo not actual machine |
|
Ad # 7162 | RAM / Conventional EDM Machines |
|
Elox |
HRP 63 |
Fair |
sold |
Photo /
More Info. |
Elox 20" x 5" Sinker EDM : Table Size: 20" x 5"
Tank Size: 24" x 16" x 12"
Generator Type: NPS 20 (Elox)
Integrated Filter Unit
Interval Timer
"T" Slotted Head |
|
Ad # 4620 | RAM / Conventional EDM Machines |
|
ELOX |
HRP-63 |
Good |
Sold |
Photo /
More Info. |
Ram -Conventional Type EDM: Power Pack: 60 AMP
Table Size-W: 9 "
Table Size-L: 42 "
X-Axis Travel: 30 "
Y-Axis Travel: 12 "
Z-Axis Travel: 12 "
|
|
Ad # 14674 | RAM / Conventional EDM Machines |
1990? |
Santec/sharp |
HS813 |
Good |
sold |
Photo /
More Info. |
hole popper: 25 amp: Santec HS813 hole popper edm
work table: 8.25 x 18.1"
travel:13" x,7.9" Y,13.6" Z
guide travel: 5.9"
electrode size: 0.3-3.0mm
max electrode length:15.75
ram platen to work table:3.9-9.85"
fluid cap:20L-2 tanks dialectric
3 axis DRO w/ edge finder for fast set up
power supply 25 amps 10 current settings w/ 10
steps
drills wide range of holes,from 0.3mm to 3.0mm
in
0.1mm increments
servo stepless VR control
notes: very nice machine! |
|
Ad # 11741 | RAM / Conventional EDM Machines |
1980 ? |
Belmont |
Maxicut ZNC-S-26 |
Fair |
sold |
Photo /
More Info. |
small hole driller-30A: Belmont Maxicut S-26 ZNC EDM Drilling Machine
Travels:
X Axis ................................. 11.8"
(300 mm)
Y Axis ................................. 9.8"
(250 mm)
Back Slide ............................. 5.9" ±
(150 mm)
Guide Height Adjustment ................. 5.9" ±
(150 mm)
Z Axis ................................. 13.7"
(350 mm)
Open Height:
Minimum ................................ 2.3"
(60 mm)
Maximum ................................ 8.2"
(210 mm)
Worktable Area .......................... 17.5"
W x 12" D
Workpan Area ............................ 34.2"
W x 22" D
Table Weight Capacity ................... 990
lb. (450 kg.)
Generator Maximum Avg. Current .......... 30 A
Overall Dimensions: 55" L x 63" W x 100" H
Weight (approx.): 3,410 lb.
Electrical: 220VAC, 60 Hz, 3.5 KVA
Hrs: 4836
Belmont Maxicut S-26 ZNC EDM Drilling Machine
|
|
Ad # 2130 | RAM / Conventional EDM Machines |
1998 |
Sodick |
MM3-Moldmaker 3 |
Excellent |
sold |
Photo /
More Info. |
CNC Conventional Ram type EDM: CNC control-Neuro Fuzzy 240
40 Amp power supply
Floppy drive
Filter system
Manuals
12"x x 8"y x 10"z travels
24" x 16" x table size
3R rotary tooling system |
|
Ad # 11727 | RAM / Conventional EDM Machines |
1997 |
Agie Elox |
Mondo 20/AF-4 |
Excellent |
Sold |
Photo /
More Info. |
Agie Elox Mondo 20 EDM with 3 axis travel of 10X 8Y 8Z: Mondo Star 20
Agie Elox Mondo 20 Ram EDM with 3 axis travel of 10X 8Y 8Z
Futura V Control
lots of tooling included: extra 3R head, approx: 75 tool holders,
CO2 Fire Extinguisher
Precision C-Axis
3R chuck
3D Orbiting
Jog Box
- Capacities Nominal work piece dimensions width 630mm
- length 380mm
- height 165mm
- Work tank internal dimensions width 630mm
- length 460mm
- height 230mm
- Work table dimensions width 400mm
- depth 300mm
Traversing path
- X axis 300mm
- Y axis 250mm
- Z axis 250mm
- Platen to table clearance min 268mm
max 518mm
- Maximum table load 200Kg
- Maximum ram workload 25Kg
- Flushing connections 3
- Nominal power connection 17Kva
- Electrics
- Complete With Agie future IV 1PM-EU Control system
- Approximate Dimensions 145 x 133 x 221cm High
- Approximate Weight 1265kgs
|
|
Ad # 6949 | RAM / Conventional EDM Machines |
1997 |
Agie/Elox |
Mondo 30 |
Excellent |
SOLD |
Photo /
More Info. |
Agie/Elox, Mondo 30, 3-axis Ram CNC Electrical Discharge Machine: Agie/Elox, Mondo 30, 3-axis Ram CNC Electrical Discharge Machine
SPECIFICATIONS:
Work Table (L x W)
25.6" x 20'
Maximum Part Weight
1000 lbs
Maximum Open Height
22.2"
Travels (x, y, z)
14" x 12'' x 9.8"
Work Tank (L x W x H)
35.8" x 26.7" x 15.7''
Electrical Requirements
190, 208, 230, 250, 400, 415, 460, 500V / 3Ph / 50/60 Hz
Service Requirements
Water & Air
Dielectric Capacity
140 Gallons
EQUIPPED WITH:
Complete Dielectric Coolant and Filtration System
Agie/Elox 3-axis, 50 Amp Controller with CRT, Futura III 2PM, SN AF 1112PM000014
Hand Pendant Controls
Manual |
|
Ad # 11268 | RAM / Conventional EDM Machines |
1998 |
Hardinge |
MS4/3050 |
Very Good |
sold |
Photo /
More Info. |
: tool changer |
|
Ad # 8436 | RAM / Conventional EDM Machines |
3/99 |
Hansvedt |
MV-10 |
Very Good |
sold |
Photo /
More Info. |
CNC Orbiting/Vectoring Sinker EDM, Travels: 8 x 6: Machine:
Type: MV 10
Table: 15" x 9"
Table Travels: 8" x 6"
Workpiece Capacity: 200 lbs
Workpiece: 24" x 16" x 11"
Ram Travel: 8"
Electrode Weight: 33 lbs
Power Supply:
Type: MP-1
75 Amps |
|
Ad # 6824 | RAM / Conventional EDM Machines |
|
Eltee |
Pulsitron TRM-21 |
Very Good |
Sold |
Photo /
More Info. |
Eltee Pulsitron TRM-21 EDM: Eltee Pulsitron TRM-21 EDM
Travels Z=12" , X= 8", Y= 6"
55 Gallon Tank Capacity
5 Micron Filtration
Max 35 PSI Flushing Pressure
Max 23 "hg Flushing Vac |
|
Ad # 14194 | RAM / Conventional EDM Machines |
1970s |
Raycon |
R-208 |
Good |
sold |
Photo /
More Info. |
10" x 16" x 10": Raycon EDM Sinker
Model R 208
6 KVA
11" x 18" Table
10" Plunge
Submerge Tank
2 Identical Machines available
|
|
Ad # 126 | RAM / Conventional EDM Machines |
70's |
CINCINNATI |
RAM TYPE |
Good |
Sold |
No Photo /
More Info. |
RAM TYPE EDM Z-MANUAL: READOUT:X,Y:
MANUAL Z AXIS;
75AMP |
|
Ad # 8599 | RAM / Conventional EDM Machines |
1991 |
charmilles |
Robofil 400 Sinker |
Very Good |
Sold |
Photo /
More Info. |
large sinker with toolchanger :17.7 x 12.6 x 16 travels: 20 Tool changer carousel
Erowa system
chiller
transformer
Factory Specs:verify below
31" X 47" X 17" DEEP TANK
:: Type : ROBOFORM 400
:: Travels: X x Y x Z :450mm x 320mm x 410mm : 17.72 " x 12.6" x 16.5"
:: Manufacturer : CHARMILLES
:: Description : max. workpiece weight: 800 Kg
Worktable size: 800 x 560 mm
C - axis
20-x toolchanger
Generator 128A
2 floppy discs
|
|
Ad # 9975 | RAM / Conventional EDM Machines |
2003 |
Charmill |
Roboform 20 |
Excellent |
sold |
Photo /
More Info. |
30m ,Charnill cnc edm: This was a support machine,.With very less running hrs. Machine still in pr... |
|
Ad # 15546 | RAM / Conventional EDM Machines |
1994 |
Charmilles Technologies |
Roboform 20 |
Good |
sold |
Photo /
More Info. |
Work Table 15.75" x 11.81": Charmilles Roboform
20 CNC EDM Sinker
Machine
Work Table
15.75" x 11.81"
Max Table Load
Capacity 440 Lbs
Work Tank 25" x
17" x 9"
X-Axis Travel
11.8"
Y-Axis Travel
9.86"
Z-Axis Travel
9,8"
Tool Changer
Type Rack/Inside Tank
Style
Too Changer
Capacity 4 Positions
Dielectric Fluid
Capacity 55 Gallons
Machine Weight
1,760 Lbs
Machine Size 80"
x 52" x 92" |
|
Ad # 6948 | RAM / Conventional EDM Machines |
1996 |
Charmilles |
Roboform 20 CNC |
Excellent |
Sold |
Photo /
More Info. |
Charmilles, Roboform 20 CNC, 3 axis Ram CNC Electrical Discharge Machi: Charmilles, Roboform 20 CNC, 3 axis Ram CNC Electrical Discharge Machine
SPECIFICATIONS:
Travels (XxYxZ) . . . . . . .11.8" x 9.8" x 9.8"
Tank Size (WxDxH) . . . . . . 23.6" x 15.7" x 7"
Table Size (WxD) . . . . . . . . .15.7" x 11.8"
Maximum Workpiece Weight (Lbs) . . . . 441
Distance Ram Platen to Table (Max) . . . . .15.3"
Overall Dimensions (WxDxH) :
Tool (WxDxH) . . . . . . . . . 54" x 52" x 95"
Controller (WxDxH) . . . . . . 26" x 25" x 75"
Approximate Weight:
Tool (Lbs) . . . . . . . . . . 2100
Controller (lbs) . . . . . . . . .595
Electrical Requirements (V,Hz,Ph): . . . 380,60,3
Service requirements : . . . . .Water & 6 Bar Air
EQUIPPED WITH:
Complete Dielectric and Filtration System
Charmilles 32 Amp Power Supply (No 'C' Axis)
4 Position Mecatool Tool Changer
6" x 12" Magnetic Chuck
Power Transformer |
|
Ad # 6342 | RAM / Conventional EDM Machines |
1996 |
Charmilles |
Roboform-2000 |
Very Good |
Sold |
Photo /
More Info. |
Charmilles, Roboform-2000, Sinker EDM Machine: 128 APM
48 Position 3R Macro Tool Changer
C Axis
4 Axis
7700 Hours |
|
Ad # 15574 | RAM / Conventional EDM Machines |
2015 |
Hankook NSD EDM MAX |
SD-750-76 |
Good |
Sold |
Photo /
More Info. |
25 x 17": 2015 Hankook NSD EDM
MAX, SD-750-76, Drill
Machine, 3 Phase,
220V, 60HZ
std mfr specs below
- please verify
Tables (X x Y)
750mm x 450mm 25.6" x
17.7"
W - Electrode
Travel 700mm 27.6"
Z - Guide Travel
360mm 14.2"
Maximum Work Piece
Size 1140mm x 580mm
45" x 22.8"
Maximum Distance
Table to Guide 90mm -
452mm 3.6" - 17.8"
Work Piece Weight
500Kg 1100 lbs.
Electrode Diameter
.3mm - 3.0mm (6.0mm
opt.) .012"-.124"
Maximum Electrode
Length 700mm 28"
Machine Weight
1600Kg 3520 lbs.
Machine Dimensions
1910 x 1980 x 2300
76" x 79" x 90.5"
Power Supply 60A
Automatic Electrode
Charger (AEC) 15 (32
opt.)
Automatic Guide
Changer (AGC) 4 opt.
Work Tank Size 130
liters 34 gal.
Power Input
220/3/60 6kVA |
|
Ad # 8013 | RAM / Conventional EDM Machines |
2001 |
SHARP |
SED 300C |
Demo Machine |
sold |
Photo /
More Info. |
36 AMP POWER SUPPLY: THIS MACHINE IS "CHERRY"! WAS BOUGHT FOR A
SPECIFIC JOB BUT HARDLY USED. THE TIMER ON
THE MACHINE SHOWS 46.5 HOURS.
TABLE SIZE IS 11.8" X 23.6" TABLE TRAVEL = 7.8" X
11.8".
36 AMP POWER SUPPLY
THIS UNIT IS EXTRA CLEAN AND HAS MORE DUST
ON IT THAN ANYTHING ELSE. |
|
Ad # 13589 | RAM / Conventional EDM Machines |
? |
Eltee Pulsitron/EP |
TR 30 |
Good |
sold |
Photo /
More Info. |
30 AMP -sinker: Eltee Pulsitron-EP# TR30
Tank Size 17-1/2" x 14-1/2" x 9"Deep
30 AMP
3 axis DRO
Comes with original manual; runs and looks
great
note: std specs below -please verify actual
machine
Quill travel, servo control
.. 5
Additional head adjustment on column
8
Throat distance
. 10 ½
Maximum clearance from quill to table
.17
Table travels :
X-axis travel
.. 8
Y-axis travel
. 6"
Table load capacity
. 240 lbs
|
|
Ad # 7172 | RAM / Conventional EDM Machines |
|
Eltee Pulsatron |
TR-20 |
Good |
Sold |
Photo /
More Info. |
13" x 19" Tank Sink EDM Machine : Generator: 30 Amp
Table Size: 8" x 6"
Tank Size: 13" x 19"
Filter Unit Included;: (See photo) |
|
Ad # 1152 | RAM / Conventional EDM Machines |
1984 |
Elox |
Workmaster 45 |
Good |
Sold |
Photo /
More Info. |
Large Sinker Type EDM: 50Amp unit
low hours
filter
chiller
28" x 16" table size |
|
Ad # 8973 | RAM / Conventional EDM Machines |
1988 |
Elox |
Workmaster 45 |
Very Good |
sold |
Photo /
More Info. |
16KVA: This is a good working EDM machine , We have very
few hours of use and has been kept in excellent
condition.
It comes with a full control panel , tank .
All manuals are available as well as additional
parts.
16KVA
less than 100 hrs total on this machine |
|
Ad # 4486 | RAM / Conventional EDM Machines |
1999 |
Gromax |
ZNC-P46-100A |
Very Good |
sold |
Photo /
More Info. |
20" x 16" Ram Edm with DRO and Prog Z Axis: Power Supply: Amps 100 amp
Table: 27.6" x 15.8"
Maximum Table Load 3,300 lbs
Travels:
X-Axis (Longitudinal) 19.8"
Y-Axis (Cross) 16.0"
Z-Axis (Vertical) 7.25"
Tank: 45" x 25" x 16" deep
Additional Spec's:
Max. Workpiece Size: 35" x 22" x 16"
Backslide Travel: 15.5"
Quill Travel: 7.25"
Max. Distance Table Top to Electrode: 27.7"
Dielectric Reservoir Capacity: 79 Gal.
Equipped With: Fuzzy Logic CNC Control w/14" CRT on Screen Programming
3-Axis DRO's w/Auto Depth Stop
*Ram Type Z-Axis Programmable Sinker EDM
2 available-see ad 4487 |
|
Ad # 4487 | RAM / Conventional EDM Machines |
1998 |
Gromax |
ZNC46-75A |
Very Good |
sold |
Photo /
More Info. |
RAM EDM with DRO and Prog Z Axis: Power Supply: Amps 75 amp
Table: 27.6" x 15.8"
Maximum Table Load 3,300 lbs
Travels:
X-Axis (Longitudinal) 19.8 "
Y-Axis (Cross) 16.0 "
Z-Axis (Vertical) 7.25 "
Tank: Length 45" x 25" x 16" deep
Additional Spec's:
Max. Workpiece Size: 35" x 22" x 16"
Backslide Travel: 15.5"
Quill Travel: 7.25"
Max. Distance Table Top to Electrode: 27.7"
Dielectric Reservoir Capacity: 79 Gal.
Equipped With: Fuzzy Logic CNC Control w/14" CRT on Screen Programming
3-Axis DRO's w/Auto Depth Stop
*Ram Type Z-Axis Programmable Sinker EDM |
|