|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1985 Make - TAISEI Model - GRI-2000S |
|---|
| FOR SALE: Ad # 7267 , Year = 1985 , Make = TAISEI , Model = GRI-2000S | 
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Model GRI-2000S TAISEI Internal Grinder
|
| Ad #
7267 |
| Year:
| 1985
|
| Make:
| TAISEI
|
| Model:
| GRI-2000S
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 17,500 lbs
|
| Dimension: L x W x H | 232.25" x 46" x 81.5" |
Machine Location:
|
| City: |
On Request
|
| State: |
Delaware
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Model GRI-2000S TAISEI Internal Grinder
Diameter of hole to be ground 1.97” to 27.6”
Max. length of hole ground 39.4”
Max. length of work 78.7”
Max. swing inside chuck guard 33.5”
Height from table top to centerline of work over table 19.7”
Max. swing over table 39.4”
Max. stroke of table 78.7”
(6) Table grinding feeds 5.12-35.43 IPM
(6) Table rapid traverse rates 10.24-70.87 IPM
Table travel per revolution of handwheel 0.9”
Workhead spindle taper No. 5 M.T.
Workhead swivel adjustment up to 15 degrees ±
Workhead transverse adjustment:
Forward from center 3.9”
Backward from center 19.8”
Workhead transverse adjustment per
revolution of handwheel 0.24”
Infinitely variable work head speeds 10-150 RPM
Manual wheel infeed (cross feed) 0.04”
Manual wheel infeed (crossfeed) per
revolution of handwheel 0.0001”
Automatic hydraulic wheel infeed (crossfeed) per
table stroke on work radius 0.0001” to 0.0012”
Hydraulic cross & reverse arrangement of wheelhead 8”
Grinding heads spindle speed ranges 4670 to 7000 RPM
EQUIPPED WITH:
(6) Grinding spindles
(2) 4.72” Dia. x 42” reach
(1) 4.72” Dia. x 24” reach
(1) 4” Dia. x 32” reach
(1) 2 ¾” Dia. x 12” reach
(1) 1” Dia. x 12” reach
Inch calibrated wheel infeed index dial graduated to read 0.0002” per
division on work diameters
Infinitely variable workhead speeds
Automatic hydraulic wheel infeed
Hydraulic cross-traverse arrangement of wheelhead (8”)
Common mounting base for work rest and wheel dresser
Angular wheel dresser
32” Dia. faceplate with dual center
28” Dia. 4-jaw chuck
3 point roller steady rest w/ riser
Automatic cycle controls
Rapid traverse table
Chuck guard
Wheel balancing stand with mandrel
(11) Wheel mounts with grinding wheels
25” x 42” x 10 3/8” High T-Slotted auxiliary work support table
Exterior coolant system with splash guards
Automatic lubrication
2 H.P. Table feed motor
5 H.P. Workhead drive motor with ring-cone type speed variation and
work spindle controller
5 H.P. Wheel spindle drive motor
Main and auxiliary control panels
|
| Electrical Description |
- 3/60/440 volt input with transformer
|
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
