| Year:
| 1997
|
| Make:
| KENT
|
| Model:
| KGS-63SD1
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 4,000 Lbs.
|
| Dimension: L x W x H | 148" x 100" |
Machine Location:
|
| City: |
On Request
|
| State: |
New York
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 12" x 24" KENT Hydraulic Surface Grinder, Model KGS-63SD1
Capacity:
Overall table working area (width x length) 11.81" x 25.59"
Longitudinal table travel 27.95"
Cross table travel 13.39"
Maximum table load (with chuck) 550 Lbs.
Maximum/Minimum distance between working table 21.25"/4.72"
and spindle center
Table Cross Feed:
Longitudinal table speed 8 to 100 F.P.M.
Cross feed hand wheel is graduated in increments of .0001"
Automatic cross feed per stroke of table .02" to .4"
Grinding Wheel:
Standard wheel dimensions 14" diameter x 1.5" maximum
Width x 5" bore
Spindle speed 1,740 R.P.M.
Downfeed:
Automatic down feed increment 0.0001" to .004"
Downfeed hand wheel is graduated in increments of .0001"
Downfeed travel per revolution of hand wheel .02"
EQUIPPED WITH:
Hydraulically actuated longitudinal feed
Electromechanically actuated cross feed
Automatic incremental downfeed of grinding wheel head driven by stepping motor
Programmable logic controller (PLC) of all machine functions including: "Rough
Downfeed" increment and number of passes, "Fine Downfeed" increment and
number of passes, "Sparkout" times, "Downfeed Mode" for control of incremental
downfeed with table at right end of stroke, left end of stroke, or both left and right
end of stroke, "Wheel head Elevation & Position" for control of elevation increment
at completion of grinding job, "Jog" increment to allow the operator to select three
different jog rates of the grinding wheel head, and "Reset" to set the current position
of the grinding wheel as 0 point The PLC has a LED display to show the position
of the grinding wheel in relation to the starting point.
Selector switch for surface or plunge grinding modes of operation
Selector switch for automatic incremental downfeed, downward jogging, or power
rapid elevation of grinding wheel head
12" x 23-5/8" Fine division electromagntetic chuck with console mounted controls
including: variable magnetic strength, magnetization/demagnetization mode
selector, and voltage gauge meter
Over-the-wheel parallel dresser
External hydraulic pump and tank
External coolant pump and tank with paper band filtration
5 H.P. 3/60/575 volt spindle drive motor
|
| Electrical Description |
- transformer for 3/60/220 volt input
|
|
