Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12767 | Vertical Band Saws |
|
Delta |
28303 |
Good |
sold |
Photo /
More Info. |
14": Delta Bandsaw Model 28303
14" throat
Blade Speed 40-60-81-115-3000 FPM
|
|
Ad # 8368 | Vertical Band Saws |
|
Doall |
Contour V-36 |
Good |
Sold |
Photo /
More Info. |
36" Doall, 30in x 30in Table, Welder/Grinder/Shear: USED 36" DOALL VERTICAL BAND SAW
Throat Depth:36"
Maximum Work Thickness:10"
Table Size:30" L-R x 30" F-B
Table Tilt:35dg - Forward
10dg - Both Sides & Rear
Auxiliary Table Size:20" L-R x 17" F-B
Wheel Diameter:16"
Band Length:162"
Band Width:1/2"
Band Speeds Approx.:50 - 1500 FPM
Floor to Top of Table:43-1/2"
EQUIPPED WITH:
Doall Welder, Grinder & Shear
Table Tilt Control Via Hand
Wheel
Hand Wheel Adjustment For
Blade Tension
Variable Speed Control Via
Hand Wheel
Air Chip Blower
Shift Lever For High & Low Speed
Pushbuttons For Start - Stop
1 HP 1740 RPM 220/440/3/60 Variable
Speed Pulley Drive Motor
|
|
Ad # 8367 | Vertical Band Saws |
1974 |
Tannewitz |
PV-1-E |
Good |
Sold |
Photo /
More Info. |
30in x 14in, Tilt Frame, Vertical Band Saw: USED 30" TANNEWITZ VERTICAL BAND SAW
Throat Depth:30"
Maximum Work Thickness:14"
Table Size:27.75" L R x 25.5" F B
Table Tilt:45 deg. Right
10 deg. Left
Floor to Top of Table:38.5"
Front Edge of Table to Saw:13"
Wheel Diameters:30"
Upper Wheel Vertical Adjustment:5.5"
Maximum Band Length:16'6"
Band Width:1/8" - 1.5"
EQUIPPED WITH:
Pushbuttons For Start Stop
Hand Wheels For Upper Wheel
Vertical Adj. & Table Tilt
5 HP 1150 RPM 330/460/3/60 Motor
|
|
Ad # 14804 | Vertical Band Saws |
|
STARTRITE |
V500F |
Good |
sold |
Photo /
More Info. |
3 HP - 5200 SFPM: Startrite Band Saw -
Model # V500F
3HP – 5200 SFPM
link to specs:[COPY & PASTE INTO BROWSER]
http://www.sterlingmachinery.com/db-
files/Startrite%20-
%20Clausing%20Vertical%20Metal%20Working%20Band
saws%20Brochure.pdf |
|
Ad # 10458 | Vertical Band Saws |
|
Do-All |
1612-3 |
Good |
sold |
Photo /
More Info. |
Do-All Model 1612-3, 16" throat" Vertical Band Saw : Do-All Vertical Band Saw, Model# 1612-3, 30.5" x 24"
Table Size 30.5" x 24"
Throat Depth 16"
Height Under Cast 12"
Hydraulic Feed To Table
Table Feed 12"
Speeds 25-6100RPM
Manual Band Tension
Table Cap 250 lbs
|
|
Ad # 7241 | Vertical Band Saws |
1964 |
Rockwell Delta |
28-365 |
Very Good |
sold |
Photo /
More Info. |
20" Rockwell Delta Vertical Band saw : 50-4500 RPM
Table Size 24" x 24"
1-1/2 HP
|
|
Ad # 12633 | Vertical Band Saws |
|
Lockformer |
Band Saw |
Good |
sold |
Photo /
More Info. |
24" : LOCKFORMER 24 S ( 24 “ Throat ) Band Saw. 1988
Model………………….
120 Volt single Phase………………………… |
|
Ad # 4449 | Vertical Band Saws |
2004 |
Acra |
kv100 |
Excellent |
Sold |
Photo /
More Info. |
Extra deep throat 39- 3/8": Like new saw with deep throat 40".
Max. work ht. 11 13/16",
tables(2) 17.75 x 19.5 & 23.5 x 19.5,
blade length. 177" width 1/8-5/8",
blade speed 65-265fpm - 400-1600fpm.
2 hp motor.
saw blade butt welder w/ annealing unit. blade shear, grinder, work light. Very clean, low hours. |
|
Ad # 14879 | Vertical Band Saws |
2008? |
Jet |
VBS--18MW |
Good |
sold |
Photo /
More Info. |
18" throat: Jet vertical band saw #VBS-18MW for wood or metal
throat: 18"
3/4" blade(comes with)
Blade Size:LxWxThickness(in.):137 x 3/4 x 0.0356
The JET Wood/Metal Vertical Bandsaw offers machine and fabrication professionals all the power and precision needed in a package that meets your individual specifications. JET has engineered a gear box that permits cutting of a great variety of materials
Features + Benefits
•Exclusive quick release, precision T-square style rip fence
•Built-in cutting height scale
• Extra large 19in. x19in. cast iron table
•Convenient speed changes with no tools required
•Ball bearing guide system reduces friction for longer blade life
•Lower blade wheel brush and dust collection port keeps things clean
•Heavy-duty gear box
• Smooth roller bearing guides
•Handy Miter gauge for accurate cuts
•Fence and rail assembly is included
•4in. dust chute resists clogging
•Durable 3/4in. tool steel (SKS2) blade
•Chip tray
• Easy-to-view blade tracking adjustment window
•Tension release lever
•Blade speeds: Metal (SFPM) 80, 150, 265
•Blade speeds: Wood (SFPM) 1,000, 1,800, 3,200
•12in. max. height capacity
•18 3/8in. throat capacity
• Roomy 19in.L x 19in.W table size
•Adjustable table tilt to right: 45 degrees
• Adjustable table tilt to left: 10 degrees
•37 1/2in. table height
motor HP: 1.5
Cutting Capacity (SFPM) Metal: 80/150/265;
Wood: 1,000/1,800/3,200
sells new for $2599.00 |
|
Ad # 7869 | Vertical Band Saws |
2004 |
Import |
4.5in ROund Capacity |
Very Good |
Sold |
Photo /
More Info. |
4.5" Round Horiz + Vertical, Portable Band Saw with Miter Vise, 110 V: Capacity:
Round: 4-1/2"
Rectangle: 4" x 6"
Blade: 1/2" Wide
Miter Vise - 45 or 90 deg
Portable (Castors)
110v/single phase supply |
|
Ad # 6039 | Vertical Band Saws |
1956 |
DO-ALL |
Type 16-2 |
Good |
Sold |
Photo /
More Info. |
16” 16-2 DO-ALL Vertical Band Saw: 16” 16-2 DO-ALL Vertical Band Saw
Throat 16”
Variable band speed 50-1500 FPM
Work height 10”
Wheel diameter 16”
Band length 120”
Band width 1/16”-3/4”
Table size 24”x24”
Table tilt 45ºR, 10ºL
EQUIPPED WITH:
20Speed transmission with variable speeds
Welder/grinder
Work light
1 H.P.
|
|
Ad # 12743 | Vertical Band Saws |
1991 |
Dake Johnson |
VH-40 |
Good |
sold |
Photo /
More Info. |
40" Throat: Dake Johnson Bandsaw-hyd table feed
40" Throat depth
Blade Speed 50-4250 FPM-low & hi range
table size: 26" x 26"
table travel hyd: 10"
tilt 10 deg left or right
table max weight: 850lbs
blade size: 186-189" x 1/8 to 3/4" width
2.2 HP motor
blade dust blow off pump/nozzle
welder: 1/8" -1" blades
wired: 220/3 Phase
Power Table feed-vari speed |
|
Ad # 5847 | Vertical Band Saws |
1973 |
DoAll |
TF-1421 |
Good |
Sold |
No Photo /
More Info. |
14" x 21" DoAll Medium Duty Tilt-Frame Band Saw: Maximum Cut 14" x 21" @ 90°
14" x 14" @ 45°
Blade Size 1" x 171"
Blade Speeds Variable 105 to 275 FPM
Hydraulic Drive 1.5 H.P., 208/230V 3Ph
Maximum Table Load 1,000 Lbs.
Equipped With:
Hydraulic Blade Head Feed
Hydraulic Vise Clamping
Hydraulic Blade Drive
Coolant Pan & Pump |
|
Ad # 10580 | Vertical Band Saws |
2000?? |
Delta |
28365 |
Good |
Sold |
Photo /
More Info. |
20" throat: 20" throat
tilt table
Good for wood, plastic or Metal
High speed/Low speeds
Variable speed drive-needs a little work |
|
Ad # 12003 | Vertical Band Saws |
2008 |
grob |
4v-24 |
Excellent |
sold |
Photo /
More Info. |
24" throat: grob 4v-24 vertical band saw
24" throat depth
Blade speed FPM: 40-5000
max work height table to top of column: 12"
3 speed gear box
tilt table 24" x 28"
carbide guides
very nice saw
std specs below:
24" Throat Depth, 12" Work Height
Saw Blades 1/8" - 1" Wide 179" Max.,
Net Weight 1670 lbs.
The most powerful metal cutting vertical band saws in the class. Heavy Duty Grob Inc. manufactured transmission with all cold rolled gears and splines for unequalled strength. Infinitely Variable speed range for complete control of your sawing needs. Completely manufactured in USA for the ultimate value in metal cutting bandsaws.
•3 h.p. 230/460 Volt Motor (Totally Enclosed Fan Cooled Ball Bearing Double Shaft Motor)
•Infinitely Variable Speed 40-5000 F.P.M.
•Speed Indicator
•Balanced Cast Aluminum Pulleys, Ball Bearing Mounted, Oil Resistant Rubber Facing
•Heavy Cast Iron Table - Tilt 45 down right, Tilt 5 down left
•3/8 - 1/2 Single Piece Hard Aluminum-Bronze Saw Guides |
|
Ad # 15107 | Vertical Band Saws |
196.? |
Do All |
1612-0 |
Good |
Sold |
Photo /
More Info. |
16" throat: Do-all vertical band saw # 1612-0
tilt table
blade speed indicator
capacity: 16" throat x 12" height
blade welder
work light
16" DOALL VERTICAL BANDSAW
MODEL: 1612-0
SPECIFICATIONS:
THROAT CAPACITY............ 16"
WORK HEIGHT CAPACITY........ 12"
BAND WIDTH CAPACITY...... 1/16" - 1/2"
BAND LENGTH ................ 125"
TABLE SIZE.............. 24" X 24"
TABLE TILT RIGHT / LEFT .45 / 10 DEGREES
BLADE SPEED INFINITELY VARIABLE:
2 SPEED RANGES.... 50 - 5200 FPM
WHEEL DIAMETERS..... 16-1/4"
APPROXIMATE SIZE... 50"x45"x60" H
UNIT WEIGHT......... 1,000 LBS. |
|
Ad # 14297 | Vertical Band Saws |
200? |
MSC/Vectrex |
500 #09514647 |
Good |
sold |
Photo /
More Info. |
20" Throat: MSC vari speed vertical band saw #500
Vertical Bandsaws; Drive Type: Variable Speed
Pulley; Throat Capacity (mm): 508.00;
Throat Capacity (Inch): 20"; Height Capacity
(Inch): 14-1/8; Height Capacity (mm): 358.78;
Phase: 3
•Variable speed pulleys are driven by a V-shaped
belt system and a variable speed assembly that
regulates an infinite speed range change by the
turn of a dial.
•Three-phase refers to three individual lines
(coils) that connect to and run voltage through
the motor. Each line alternates in a sequence as
it reaches its voltage peak. They provide a more
stable flow of voltage and more horsepower to the
equipment.
Drive Type Variable Speed Pulley Throat Capacity
(mm) 508.00 Throat Capacity (Inch) 20 Height
Capacity (Inch) 14-1/8 Height Capacity (mm) 358.78
Phase 3 Blade Speeds (SFPM) 82 to 1496 Blade
Speeds (m/min) 25 to 456 Blade Length (mm) 4070.35
Blade Length (Inch) 160-1/4 Blade Width (mm) 3.18
to 25.40 Blade Width (Inch) 1/8 to 1 Table Length
(mm) 739.78 Table Length (Inch) 29-1/8 Table Width
(mm) 679.45 Table Width (Inch) 26-3/4 Floor to
Table Height (Inch) 39-3/8 Table Tilt Right ( )
15.00 Horsepower (HP) 2.00 Voltage 220 Overall
Height (mm) 2051.05 Overall Height (Inch) 80-3/4
vari speed
tilt table
air blow off
blade welder
Note:This saw will cut steel, aluminum, plastic,
wood, ext..looks in very good condition..little
use on it....price new $8797.00 |
|
Ad # 7931 | Vertical Band Saws |
80's |
Grob |
4V-24 |
Good |
Sold |
Photo /
More Info. |
24" Vertical saw with welder: 24" throat
welder
carbide guides
work light
has table feed but disconected, can be fixed
3HP 230/460 Volt motor(totally enclosed fan cooled ball bearing double shaft motor)
Infinitely variable speed 40-5000 FPM
Speed indicator
Balanced cast aluminum pulleys, ball bearing mounted, oil resistant rubber facing
Heavy cast iron table-Tilt 45 degrees down right, Tilt 5 degrees down left
3/8-1/2 Single piece hard aluminum-bronze saw guides -has carbide option
recently replaced rubber tires-band wheels
The most powerful metal cutting band saws in the class
Heavy duty manufactured transmission with all cold rolled gears and splines for unequalled strength
Infinitely variable speed range for complete control of your sawing needs
Completely manufactured in USA for ultimate value in metal cutting band saws
Specifications: 4V-24
Throat depth 24"
Work height 12"
Saw blades 1/8"-1" wide 179" max
Net weight lbs 1670
|
|
Ad # 15829 | Vertical Band Saws |
|
Grob |
NS-18 |
Good |
sold |
Photo /
More Info. |
18" throat: Grob NS-18 Vertical band saw
blade speed: 50-2030 FPM ,step pully change: with low /high gearbox
work light
air blow off
Motor Driven with 1 HP, 3-Phase, 60 Cycle, AC Motor & Controls
throat:18"
blade welder
mechanical table auto infeed
std machine specs below
SPECIFICATIONS:
Throat 18″
Speeds (10)50-2030 RPM
Bladewidth: 1/2″
Table Size 24″ x 24″
Table Tilt Left & Right :25 Degrees
Table Tilt Front & Back25 Degrees
Approximate Weight1,500 Lbs
spare blade
voltage 220/3 phase |
|
Ad # 5479 | Vertical Band Saws |
1965 |
TANNEWITZ |
3000MH |
Good |
SOLD |
Photo /
More Info. |
30" TANNEWITZ MODEL 3000MH VERTICAL BAND SAW: THROAT DEPTH ------------------------------ 30"
TABLE SIZE ---------- 32" X 41" WITH 4 "T" SLOTS
TABLE TILTS
VERTICAL CAPACITY ------------------------- 14"
VARIABLE SPEED RANGE ------------- 45 TO 9000 FPM
HYDRAULIC TABLE FEED
MAIN DRIVE MOTOR ----------------- 7.5 HP 440 VOLT
LENGTH OF BLADE -------------------- 17' |
|
Ad # 8797 | Vertical Band Saws |
1960 |
DoAll |
6012-3 |
Very Good |
SOLD |
Photo /
More Info. |
60" : 60” DoAll vertical Bandsaw/ W Hydraulic Table Feed
Model: 6012-3
Serial Number: 130-60112
Year: 1960
Specifications:
Throat Capacity60”
Work Height Capacity12”
Band Width Capacity1/8” - 1”
Table Size32” X 40” X ¾”
Table Stroke16”
Weight Capacity of Table2,000 lbs
INF. Variable Hydraulic Feed Range0 – 8 FPM
INF. Variable Hydraulic Feed Force Range0 – 600 lbs
Table Tilt45 degrees R, 5 Degrees L
Auxiliary Table Size30 ½” X 30 ½”
Blade Speed infinitely Variable3 speed Ranges from 40 – 9000 FPM
Band Length:
2 wheel186”
3 wheel273”
Approximate Size120” X 70” X 78” H
Approximate Weight6500 lbs
Equipped With:
Hydraulic Table Feed
Hydraulic Table Tilt
DoAll DBW-8 Blade, Grinder & Shear
Work Light
7 ½ HP Drive Motor
|
|
Ad # 7119 | Vertical Band Saws |
|
DoAll |
V-36 |
Good |
Sold |
Photo /
More Info. |
36" DoAll Vertical Saw with Tilt Table : 36 inch throat
13 in work height
Table Size: 30.5" x 30.5"
Secondry Table: 20" x 17"
Tilt in both Directions |
|
Ad # 15522 | Vertical Band Saws |
? |
Jet |
JWBS 14CS |
Excellent |
sold |
Photo /
More Info. |
14" Throat, Table 15"x15": Jet Vertical Band Saw Ferrous or Wood Cutting
Model: JWBS 14CS
Electrical: 110/1 phase
Jet JWBS-14CS bandsaw includes a 3/8-inch 6
TPI
woodworking blade
Cuts stock up to 6 inches in height and 13.5
inches wide
1 hp motor provides 3000 sfpm of blade
rotation
Guide post has 1/16-inch depth-adjustment
increments between 0 and 6 inches
Roller bearing guides keep the Jet 14-inch
bandsaw blade rotating smoothly, minimizing
overheating
Cast-iron frame and table minimize cutting
vibration, enhancing work stability and
safety |
|
Ad # 14754 | Vertical Band Saws |
1989 |
DoAll |
TF 2021NC |
Good |
sold |
Photo /
More Info. |
20" x 21" 45 Degree Max: DoAll# TF 2021NC tilt frame vertical band saw
GENERAL SPECIFICATIONS
Capacity 20” X 21”
Capacity at 45 Degrees 14”
X
20”
Blade Speeds 50 to 300
FPM
Blade Size 192” X 1
1/4”
Head Feed Rate 0-12 IPM
Main Motor Horsepower 10
EQUIPPED WITH
Hydraulic Head Tilt
Automatic Belt Tension
Coolant System
Hydraulic Feed
Replaceable Wear Plates
Infeed Shuttle |
|
Ad # 4594 | Vertical Band Saws |
1974 |
DoAll |
3612-3 |
Good |
Sold |
Photo /
More Info. |
36" DOALL VERTICAL BAND SAW: 36" x 12" Doall #3612-3, tilt frame, hyd. sliding table feed, welder/grinde... |
|
Ad # 8366 | Vertical Band Saws |
|
Doall |
2013-10 |
Good |
Sold |
Photo /
More Info. |
20": USED 20" DOALL CONTOURMATIC VERTICAL BAND SAW
Throat Depth:20"
Maximum Work Thickness:13"
Table Size:26" L-R x 26" F-B
Table Tilt:45dg to Right
10dg to Left
Band Length:154"
Band Width:1/16" - 1"
Wheel Diameter:20"
Floor to Top of Table:43"
Band speeds Approx.:50 - 5200 FPM
EQUIPPED WITH:Doall Model DBW-15 Welder, Grinder &
Shear w/Control
Doall Band Speed Indicator
Band Tension Adjustment
Contouring Attachment
Adjustable Insert Guides
Pushbuttons For Start - Stop
Handwheels For Variable Speed Drive &
Feed Heavy or Light
Work Light
Mounted on Portable I-Beam
3 HP 1755 RPM 230/460/3/60 Variable
Speed Drive Motor
|
|
Ad # 9258 | Vertical Band Saws |
|
DoAll |
ML |
Good |
sold |
Photo /
More Info. |
: Throat depth 16", 2' x2' table, 1/2" blade max, separate blade welder, cabi... |
|
Ad # 4709 | Vertical Band Saws |
1984 |
DO-ALL |
CONTOURMATIC 3612-2H |
Excellent |
Sold |
Photo /
More Info. |
36" DO-ALL Contour-Matic Vertical Band Saw:
Item # 3882 -- Basic Information
Category
Saws
Sub-Category
Saws, Vertical Band
Manufacturer
DO-ALL
Model
Contourmatic 3612-2H
Year
1984
Size
36
FOB
Wilmington, DE.
Item # 3882 -- Full Description
(1) Preowned 36” DO ALL Contour-Matic Vertical Band Saw, Model 3612-2H,new 1984
Throat, band to column 35 ½”
Maximum work height 12”
Band width 1/16” to 1”
Saw band length, two wheel drive 125”
Saw band length, three wheel drive 175”
Band speed, infinitely variable, two ranges 5-300 FPM, 850-5,200 FPM
Number of table t-slots 2
Table size (with coolant trough) 26 ½” x 33 ½”
Table height to floor 40 ¼”
Table tilts 45° R, 10° L
Table feed, hydraulically actuated 0 to 6 FPM
Table feed force 0 to 175 lbs.
Table stroke 12”
EQUIPPED WITH:
DO ALL Hi-Torque DC electronic drive-drive system delivers up to 85% of torque directly to the drive wheel. Electronic speed control holds band speed at the proper settings so that speed change is instantaneous. By eliminating many components of the mechanical speed control assemblies vibration is minimalized, which provides far better blade life. And, almost all the torque is delivered to the point of cut.
Hydraulically actuated table feed with (3) position (forward/reverse/stop) remote electric foot pedal control
Butt welder with flash grinder and blade shear
Air compressor and mist coolant
Dual range transmission with tachometer
Band tension indicator dial
Work light
3 H.P. 3/60/230-460 volt blade drive motor and electrical controls
Machine is wired for 460 volt operation
An optional 1-year breakdown warranty may be available for only 4% of the purchase price. Call for details.
Approx. weight: 2,200 lbs.
Approx. floor space required: 59”L-R x 74”F-B x 77 ½”High
Condition: Exceptional
|
|
Ad # 15130 | Vertical Band Saws |
55 |
Doall |
V26 |
Good |
sold |
Photo /
More Info. |
12X26: used machine running when it was picked up. Had
it
powered
up runs good. No lose bearings. Taken as
trade
customer
needed room in shop and did not use it that
much.
Has DBW5
blade welder condition unknown |
|
Ad # 11423 | Vertical Band Saws |
|
Kalamazoo-Startrite |
30 RFW |
Very Good |
sold |
Photo /
More Info. |
: Kalamazoo Startrite Vertical Bandsaw with Blade
Welder
Table Top: 21" x 21"
Distance: throat band to column: 30"
Distance base top to saw top: 13" |
|
Ad # 7922 | Vertical Band Saws |
|
JET |
VBS 280 |
Fair |
Sold |
Photo /
More Info. |
Jet VBS 280 Vertical Bandsaw with Welding Unit: Welding Attachment
Work light |
|
Ad # 13273 | Vertical Band Saws |
|
Do-All |
36-3 |
Good |
sold |
Photo /
More Info. |
36" throat: Do-All saw
36" throat
# 36-3
0-5,000 fpm
welder
12" work height
tilt table
24 x 30 table plus extension 24 x 24"
Note:hyd table feed system needs work |
|
Ad # 14440 | Vertical Band Saws |
1980's |
Powermatic |
87 |
Good |
sold |
Photo /
More Info. |
12" maximum work thickness: Table Size: 24"x24"
Table Tilt: 45 degree R. - 15 degree L.
Throat, Blade to Column Guard: 19" 3/4
Maximum Work Thickness: 12"
Speed Range:
Low (infinitely variable): 47-470 rpm
High (infinitely variable): 520-5200 rpm
Blade Width Capacity: 1/8 - 1"
Blade Length: 149"-152"
Upper Wheel Adjustment: 1-1/2"
Band Saw Wheel Diameter: 20"
Main Drive Motor: 2hp |
|
Ad # 11275 | Vertical Band Saws |
? |
Do-All |
26-2 |
Good |
sold |
Photo /
More Info. |
Do All Model 26-2, 26" inch Throat, Power Feed: Variable Transmission 35-800
Blade Welder
Power Table
26" Throat
36" x 36" Table
16" Working Depth |
|
Ad # 8364 | Vertical Band Saws |
1983 |
Marvel |
8 Mark I |
Good |
Sold |
Photo /
More Info. |
18in x 20in Marvel, Table 24.25in x 33in, 50-450 FPM: USED 18" X 20" MARVEL VERTICAL BAND SAW
NEW 1983
Capacities:
18" x 20" Mild Steel - Nominal
18" x 22.5" Mild Steel - Maximum
18" x 12.25" Mild Steel - 45dg - Nominal
18" x 13" Mild Steel @ 45dg Maximum
Working Surface of Table:24.25" L-R x 33" F-B (T-Slotted)
Maximum Tilt of Column & Blade: 45dg - Left or Right
Blade Size:14'6" Long x 1"
Distance Floor to Table:35.5"
Blade Speeds Approx.:50 - 450 FPM
EQUIPPED WITH:
Operating Control w/Pushbuttons
For Start - Stop
Selector Switch For Coolant On-Off
Blade Speed Adjustment With Direct
Reading Dial
Selector Switch For Neutral - Feed
6" High Quick Acting Vise
Hand Wheel to Move Blade & Column
Feed Pressure Control With Scale
1/4 HP 3450 RPM 230/460/3/60
Coolant Pump Motor
2 HP 1800 RPM 220/440/3/60 Variable
Speed Drive Motor
|
|
Ad # 8360 | Vertical Band Saws |
|
Doall |
1612-3 |
Good |
sold |
Photo /
More Info. |
16in Doall, 24" x 30.5in Table, 35-6000 FPM, with Welder, Grinder: USED 16" DOALL CONTOURMATIC VERTICAL BAND SAW
Throat Depth:16"
Maximum Work Thickness:12"
Table Size:24" L-R x 30-1/2" F-B
Table Tilt:45dg To Right
10dg To Left
Band Size:125" Length x 1" Thick
Wheel Diameter:16-1/4"
Upper Wheel Adjustment:3-1/2"
Floor To Top Of Table:45"
Band Speeds Approx:35-6000 FPM
Equipped With:
Model DFW-15 Doall Welder, Grinder & Shear
Doall Band Speed & Band Tension Indicators
Push Buttons For Start - Stop
Selector Switch For Straight-Contour
Coolant & Chip Drawer
Variable Speed Control Via Hand Wheel
Gear Shift Lever For Medium - High - Low
Drum Switch For Reverse - Stop -
Approach-Feed
3 HP 1745 RPM 230/460/3/60 V/S
Drive Motor
|
|
Ad # 9497 | Vertical Band Saws |
1972 |
Grob |
4V-24 |
Good |
Sold |
Photo /
More Info. |
24 inch throat w/ blade welder: Grob Model 4V-24 has a 24" throat and is equipped with a blade welder and w... |
|
Ad # 12589 | Vertical Band Saws |
|
Tannewitz |
TR3613M |
Good |
sold |
Photo /
More Info. |
: This Tannewitz Band Saw, model TR3613M,
capacity 18” X 36” was recently purchased from an
air force base that is no longer operational. Machine
is in excellent working condition and is up to
standards. This particular machinery has not been
used for mass production..
MACHINE SOLD AS IS.
Buyer is responsible for all shipping/loading costs
and arrangements.
|
|
Ad # 5480 | Vertical Band Saws |
1957 |
GROB |
2S-36-U |
Good |
SOLD |
Photo /
More Info. |
36" GROB VERTICAL BAND SAW: THROAT DEPTH ------------------------ 36"
WORK HEIGHT ------------------------ 20"
TABLE SIZE ----------------------- 36" X 36"
BLADE SIZE ----- ( WIDTH ) -------- 1/8" TO 1-1/4"
BLADE SIZE ----- ( LENGTH ) --------- 242" TO 252"
TABLE TILTS --------- 45 DEG. RIGHT, 15 DEG. LEFT
BLADE SPEED ---- ( VARIABLE ) --- 40 TO 15,000 RPM
MAIN DRIVE MOTOR ------------ 15/10 HP A.C.
EQUIPPED WITH ---
BLADE WELDER/GRINDER
EXTRA BLADE |
|
Ad # 9654 | Vertical Band Saws |
1986 |
Wholesale Tool Co. |
LCM-450 |
Good |
Sold |
Photo /
More Info. |
Power Band Saw: 20" x 24" worktable
1/4" - 3/4" blade
worklight
1 hp motor
20" throat |
|
Ad # 5284 | Vertical Band Saws |
2003? |
MSC/T-Jaw |
# 09514670 |
Excellent |
Sold |
Photo /
More Info. |
40" Throat Vertical Bandsaw: Floor mounted 40" throat x 14" height.
Motor 2hp
Blade sizes 1/8" to 1".
Tilt bed 15 degrees Rt or Lt.
Lever speed changer transmission.
Speed variation 65 to 1292 fpm.
Replaceable rubber tires on blade wheels.
Built in blade welder, squaring shear, & grinder. |
|
Ad # 5846 | Vertical Band Saws |
1966 |
Tannewitz |
GVTNE |
Excellent |
Sold |
Photo /
More Info. |
35-1/2" Tannewitz Vertical Band Saw: Capacity 35-1/2" Throat
Distance Under Throat 16-1/4"
Table Size 31" x 41" Working Surface
36" x 46" Overall (w/ Coolant Trough)
Blade Size Up to 1-1/4" x 244"
Blade Speeds 55 to 11,000 FPM (3-Speed Gear Box and Vari-Speed Drive)
Motor 15 H.P. 208/220/440Volt 3 Phase
Wheel Diameter 36"
Table Tilt 45°
Table Stroke 16½"
Equipped With:
Hydraulically Fed Table
Adjustable Table Feed Pressure
Coolant
Electro-Hydraulic Blade Brake
Integrated Reeves Vari-Speed Drive |
|
Ad # 14762 | Vertical Band Saws |
2014 |
Grizzley |
G8144Z |
Excellent |
sold |
Photo /
More Info. |
12" throat: Grizzley #G8144Z vertical band saw
This versatile bandsaw allows intricate cutting
of
aluminum or brass to tool steel. Features a
blade
welding station which includes a cutter,
welder,
annealer and a grinder. Ideal for making inside
cuts and quick repairs.
Features:
•Variable speed from 104–1300 FPM
•Blade welding station includes cutter, welder,
annealer and grinder
•Left, right table tilting control
•Integrated chip pan
•Upper and lower blade guides
•Work light
•Wheel brush
Specifications:
•Main motor: 1 HP, 220V, 3-phase, 1725 RPM with
single-phase inverter
•Grinder motor: 1/8 HP, 220V, single-phase
•Power source: 220V, single-phase, 60 Hz
•Maximum cutting height: 5-1/8"
•Throat capacity: 12-3/16"
•Blade length range: 94-1/4"–98-1/4"
•Blade size range: 1/8"–3/8"
•Blade speed: Variable, 104–1300 FPM
•Electric welder: 1.2 KVA
•Table tilt: 45° right, 15° left
•Floor to table height: 34-5/8"
•Table size: 18-1/8" x 22-1/8"
•Overall dimensions: 34" W x 59-7/8" H x 21-
1/4"
D
•Approximate shipping weight: 428 lbs.
Note: like new includes 3 spare blades and
cutting wax,very nice heavy duty saw for wood
or
metal use!
|
|
Ad # 11536 | Vertical Band Saws |
|
ENCO |
135-1545 |
Very Good |
sold |
Photo /
More Info. |
14-3/4" throat: 14 3/4in Vertical Bandsaw 1 HP 220V 1 Phase
Will cut steel, aluminum alloys, cast iron, bass, even plastic or plexiglass
Both models come complete with large capacity welder, blade cutter, blade grinder and work lamp.
0.025" blade thickness
Table inclination 15° front and back, 15° right and left
Model 135-1545 infinitely variable speed
Vertical Bandsaw 14 3/4"
Motor & electrics 1 HP, 220V, 1 PH
Speeds SFPM 65 to 265
Capacity Thickness 9 1/4" Max
Capacity Width 14 3/4" Max
Table Size 19 3/4" x 19 3/4"
Blade length 122"
Blade Width 3/8"
Blade thickness 0.025"
Height Floor to Table 39 1/4"
Overall Height 68"
Welder 2.0 KVA
|
|
Ad # 8210 | Vertical Band Saws |
|
Delta |
20-V |
Fair |
SOLD |
Photo /
More Info. |
20" Vertical Band Saw with Hand Fed Table: Throat: 20"
Blade Width: 3/4"
Table: Custom Hand Fed, 36" x 36" |
|
Ad # 5478 | Vertical Band Saws |
1951 |
DoAll |
V-60 |
Good |
SOLD |
Photo /
More Info. |
DOALL MODEL V60 CONTOURING VERTICAL BAND SAW: THROAT DEPTH ------------------------------ 60"
MAXIMUM WORK THICKNESS CAPACITY ----------- 12"
TABLE SIZE ----------------- 30" X 30" X 2-1/4"
DISTANCE TABLE TO FLOOR -------------- 44"
TABLE TILT, UNIVERSAL SWIVEL ---- 35 DEG. FORWARD
TABLE TILT, UNIVERSAL SWIVEL - 10 DEG. TO BOTH SIDES & REAR
WHEEL DIAMETER ------------------------- 26"
UPPER WHEEL ADJUSTMENT ----------------- 5-3/4"
SAW LENGTH ----------------------------- 254"
FILE BAND LENGTH --------------------- 249"
CUTTING SPEED ------------------ 50 TO 1500 FPM
EQUIPPED WITH ---
POWER FEED
BLADE WELD/GRINDING ATTACHMENT
CHIP CHUTE
JOB SELECTOR
WORK LIGHT
SPEED REGULATOR
SPEED INDICATOR |
|
Ad # 14180 | Vertical Band Saws |
? |
Rockwell |
20 |
Excellent |
sold |
Photo /
More Info. |
20" throat, table 24" x 24": Rockwell Vertical Band Saw
Ferrous cutting
Model: 20
Series: 28 3x5
Capacity: 20" throat, table 24" x 24"
Electrical: 220/3 phase
Table Tilt: -15/+45 deg.
Variable Speed:
Low: 50-530
High: 450-4500
Blade Length: 12' 6"
Rockwell Motor:
2 HP - 230/460V - 6.2/3.1A
1725 RPM - 60 Hz - 3 PH
|
|
Ad # 12776 | Vertical Band Saws |
|
Rockwell |
28-200 |
Good |
sold |
Photo /
More Info. |
: Rockwell
Model 28-200
13" Throat
Voltage 110/1 Phase |
|
Ad # 4428 | Vertical Band Saws |
|
DoAll |
|
Good |
Sold |
Photo /
More Info. |
30" Do-All Vertical Band Saw: 36" throat
Work light |
|
Ad # 8636 | Vertical Band Saws |
|
doall |
2013-10 |
Very Good |
sold |
Photo /
More Info. |
: w/ welder154" band length..file band 153" up to
1" blade..30" table |
|
Ad # 10950 | Vertical Band Saws |
|
DoAll |
36-R |
Good |
sold |
Photo /
More Info. |
36" tilt table: 36" throat
tilt table
550/3 elect.
variable speed 30x60 table
21" height opening |
|
Ad # 6562 | Vertical Band Saws |
1977 |
Grob |
4V-18 |
Good |
Sold |
Photo /
More Info. |
Grob Vertical Bandsaw Model 4V18 with tilting table work light and RWP: Grob Model 4V-18 with tilting table, work light, 18" throat tilt table,RWP ... |
|
Ad # 8807 | Vertical Band Saws |
|
Do-All |
2612-2H |
Good |
SOLD |
Photo /
More Info. |
26 x 12: 26" throat
12" work height
welder
high speed 25-5000
hyd table feed
3 speed gear box
24 x 31 table |
|
Ad # 11739 | Vertical Band Saws |
|
victor |
DCM-6 |
Good |
sold |
Photo /
More Info. |
24" throat: victor vert band saw
dcm-6
24" throat
digital blade speed indicator
vari speed: low 65-280FPM, high 400-1640FPM
2 HP
max blade width: 5/8"
work height: 11-13/16"
welder
tilt table |
|
Ad # 12102 | Vertical Band Saws |
|
Do-All |
2013-10 |
Good |
sold |
Photo /
More Info. |
20" throat: Do all # 2013-10 vertical band saw
20" throat
15" work height
24 x 24 tilt table
work light
rpm: 50-5200: hi Low speeds ranges
blade welder |
|
Ad # 12218 | Vertical Band Saws |
|
North State |
WBS-20L |
Good |
sold |
Photo /
More Info. |
20" Throat : North State Bandsaw WBS-20L
220 Single Phase Voltage
3 Speed
20" Throat |
|
Ad # 12108 | Vertical Band Saws |
|
Parma |
work-a-matic |
Good |
sold |
Photo /
More Info. |
8" round: parma self feed vert saw
8" throat
13" work height
3/4" blade
29 x 18" table |
|
Ad # 2867 | Vertical Band Saws |
1970 |
Grob |
4V-24 |
Good |
Sold |
Photo /
More Info. |
Grob Vertical Band Saw: 24" throat
tilt table
Blade Welder
Variable speed gear box |
|
Ad # 5873 | Vertical Band Saws |
1965 |
DO-ALL |
2612-2H |
Good |
Sold |
Photo /
More Info. |
26” DO-ALL Contour-Matic Vertical Band Saw with Hydraulic Feed Table: Throat: 26”
Work height: 12”
Table size: 24” x 30 ½”
Table weight-capacity: 1000 lbs.
Table tilt: R-45°, L-10°
Blade size 1/16”-1”
Variable blade speeds 25 - 6000 FPM
EQUIPPED WITH:
Tilt table
Hydraulic table feed with remote foot pedal control
Contouring attachment
DBW-8 butt welder, grinder and shear
Air pump and chip blower
Built-in coolant pump and tank
Variable blade speeds
Work light
3 H.P. 3/60/220-440 volt motor and controls
Wired for 3/60/220 volt operation
|
|
Ad # 1704 | Vertical Band Saws |
2000 |
Tannewitz |
# TR4012VWH |
Demo Machine |
Sold |
No Photo /
More Info. |
Large High speed Vertical band saw: 40" Throat
welder
Hyd. Table feed
12" under guides
variable speed with RPM display
4 wheel band
3HP
high speed
|
|
Ad # 13909 | Vertical Band Saws |
? |
National |
A |
Good |
sold |
Photo /
More Info. |
30" Throat: National Vertical Band Saw
Model: A
Capacity: 30" Throat
Table size: 2'x 4'
Electrical: 110/1 Phase |
|
Ad # 8365 | Vertical Band Saws |
|
Marvel |
8/M8/M2 |
Good |
Sold |
Photo /
More Info. |
18in x 24in MARVEL VERTICAL BAND SAW: USED 18" X 24" MARVEL VERTICAL BAND SAW
High Column Machine
Capacities:18" x 24" Mild Steel - Nominal
18" x 28" Mild Steel - Maximum
18" x 20-3/4" Blade @ 45Dg. Maximum
Working Surface of Table:32-3/4" L-R x 25-1/2 F-B (T-Slotted)
Maximum Tilt Of Column & Blade:45Dg. Left or Right
Blade Size:15'8" Long x 3/4"
Distance Floor To Table:33"
Blade Speeds Approx:50-200 FPM
Equipped With:
Power Feed With Adjustable Blade
Feed Pressure & Auto Stop
6" High Quick Acting Vise
Handwheel For Feed & Quick Return
Push Buttons For Start-Stop
Direct Reading Feed Scale
Protractor For Angle Of Column &
Blade
Joy Stick For High-Mid-Low
Blade Guides
1.33 HP 1800 RPM 230/460/3/60 Motor
|
|
Ad # 14902 | Vertical Band Saws |
2014 |
Grizzley |
G8144Z |
Excellent |
sold |
Photo /
More Info. |
12" throat: Grizzley #G8144Z vertical band saw
This versatile bandsaw allows intricate
cutting of aluminum or brass to tool steel.
Features a blade welding station which includes a
cutter, welder, annealer and a grinder. Ideal for
making inside cuts and quick repairs.
Features:
•Variable speed from 104–1300 FPM w/ digital
display
•Blade welding station includes cutter,
welder,
annealer and grinder
•Left, right table tilting control
•Integrated chip pan
•Upper and lower blade guides
•Work light
•Wheel brush
Specifications:
•Main motor: 1 HP, 220V, 3-phase, 1725 RPM
with
single-phase inverter
•Grinder motor: 1/8 HP, 220V, single-
phase
•Power source: 220V, single-phase, 60
Hz
•Maximum cutting height: 5-1/8"
•Throat capacity: 12-3/16"
•Blade length range: 94-1/4"–98-1/4"
•Blade size range: 1/8"–3/8"
•Blade speed: Variable, 104–1300 FPM
•Electric welder: 1.2 KVA
•Table tilt: 45° right, 15° left
•Floor to table height: 34-5/8"
•Table size: 18-1/8" x 22-1/8"
•Overall dimensions: 34" W x 59-7/8" H
x 21-
1/4" D
•Approximate shipping weight: 428 lbs.
Note: like new includes 3 spare blades
and
cutting
wax
|
|
Ad # 7867 | Vertical Band Saws |
|
Marvel |
Series 8/Mark 1 |
Very Good |
Sold |
Photo /
More Info. |
18" Throat, Tilt Frame Marvel Vertical Band Saw: Throat: 18"
Height: 20"
Manual Tilt: +/- 45 degrees
Table: 33" x 24"
Blade Width: 1"
Blade Speed: 50 - 45 fpm
5' Infeed Roller Conveyor, 22" Wide
5' Outfeed Roller Conveyor, 22" Wide
Coolant System
Manual Vise |
|
Ad # 8363 | Vertical Band Saws |
1985 |
Marvel |
Series 8 Mark I |
Good |
Sold |
Photo /
More Info. |
18" x 20" Mild Steel: USED 18" x 20" MARVEL VERTICAL BAND SAW
Capacities:18" x 20" Mild Steel - Nominal
18" x 22-1/2" Mild Steel - Maximum
18" x 12-1/4" Mild Steel @ 45dg - Nominal
18" x 13" Mild Steel @ 45dg - Maximum
Working Surface Of Table: 24-1/4" L-R x 33" F-B (T-Slotted)
Maximum Tilt Of Column & Blade:45dg-Left Or Right
Blade Size:14'6" Long x 1" Thick
Distance Floor To Table:36"
Blade Speeds Approx:50-450 FPM
Equipped With:Operating Control w/Pushbuttons
For Start-Stop
Blade Speed Adjustment With Direct
Reading Dial
Selector Switch For Neutral Feed
Coolant Pump & Chip Pan
6" High Quick Acting Vise
Handwheel To Move Blade & Column
1/4 Coolant Pump Motor
2 HP 1800 RPM 220/440/3/60
V.S. Drive Motor
|
|
Ad # 15116 | Vertical Band Saws |
|
Tannewitz |
TR18 |
Good |
sold |
Photo /
More Info. |
18" throat: Tannewitz TR18 vertical band saw
18" throat
work light
vari speed
Rugged Cast Iron Frame eliminates deflection &
vibration for precise cutting. Infinitely
variable
speed for all types of materials. Hand wheel
controlled speed changes. Speed changes while
in
operation w/o stopping or w/o pulley changes.
Maintenance free air pumps to remove chips @ the
cutting point. Machine light. Rubber tires for
better tracking.
Blade Speeds (FPM): 82-384 FPM
Height Capacity (max/in): 10"
Throat Capacity (max/in): 18"
Table Size (in): 22 1/4" x 19 5/8"
Table Tilt: 15° L&R, 10° F&B
Blade Length (approx./in): 140 1/2"
Blade Width (min-max/in): 1/8" - 5/8"
Table Height at 90° (in): 39 3/4"
Floor Space Required (in): 40 1/2" x 22"
Motor: 1HP 1PH 115/230V
NW (lbs): 836 lbs |
|
Ad # 14391 | Vertical Band Saws |
|
craftsman |
12" |
Good |
sold |
Photo /
More Info. |
12" throat x 6" work height: craftsman vertical band saw
12" throat x 6" work height
110/1 voltage
62" x up to 1/4"wide blade size
includes a wood/metal blade 1/8" wide
ready to go...nice home or light duty industrial
saw |
|
Ad # 9527 | Vertical Band Saws |
2002 |
Birmingham |
KB3O |
Excellent |
Sold |
Photo /
More Info. |
12 3/8 X 6 7/8: 12-3/8" throat
2 tables one never used
Rip Fence
Miter
Work Lamp
Blade shear
Built in blade and tire cleaning brush
Saw blade butt welder with integrated annealing unit 1/8” – 5/8”
Blade Grinding Wheel W/Light
Air Chip Remover
220 Single Phase
SAW Cost New with extras is $2800.00 |
|
Ad # 5778 | Vertical Band Saws |
1994 |
DO-ALL |
3613-1 |
Excellent |
Sold |
Photo /
More Info. |
36” 3613-1 DO-ALL Vertical Band Saw: Throat 36”
Maximum work height 13”
Table size 24” x 30 ½”
Table tilt 45° Right, 10° Left
(2) ranges infinitely variable band speeds 50-300, 850-5200 FPM
Table weight capacity 500 lbs.
Maximum table feed 12”
Band length 125”
Band width 1/16”-1”
|
|
Ad # 9716 | Vertical Band Saws |
87 |
Rollin-in |
|
Good |
sold |
Photo /
More Info. |
18x30 table roll-in: roll-in
18x30 table
roll-in-auto feed type
9x9 cut
1/4-3/4 blade
75-500 fpm
light |
|
Ad # 7764 | Vertical Band Saws |
|
Rockwell |
Model 20 |
Needs Work |
SOLD |
Photo /
More Info. |
: *Rockwell Model 20 Vertical Band
*Blade Grinder and Welder
*Needs tires and a blade
*240 Volt
*3 Phase |
|
Ad # 11317 | Vertical Band Saws |
|
Delta |
20 |
Fair |
Sold |
Photo /
More Info. |
20" throat: Delta
wood/metal saw
rpm-75-4500
2 speed gear box
vari speed
tilt table 24" x 24"
it runs |
|
Ad # 7801 | Vertical Band Saws |
2006 |
Grob |
4V-18 |
Excellent |
Sold |
Photo /
More Info. |
18" Grob Vertical Bandsaw with Welder: Throat: 18"
Table Size: 28" x 24-1/2"
Table Tilt 10 deg - 0 - 45 deg
Variable Speed Drive
Built-in Welder Unit |
|
Ad # 9773 | Vertical Band Saws |
|
Enco |
Enco-450 |
Very Good |
sold |
No Photo /
More Info. |
14" capacity: Enco band saw w/blade welding accessory.
Single phase converter. |
|
Ad # 14563 | Vertical Band Saws |
80's? |
Rollin |
EF1459 |
Good |
sold |
Photo /
More Info. |
: Rollin # EF 1459 vertical band saw
std specs below:
Roll-In Saw built its reputation on the
versatility and durability of this terrific band
saw – the EF1459, a.k.a, “The Original.” This was
the first saw in America to use a patented
gravity-feed system that saves time and energy.
The EF1459 is actually a horizontal band saw on
a vertical frame. An all-purpose band saw, it
handles all metals, plastics, and woods in a wide
variety of cuts. It is a fast, accurate cut-off
machine that is perfect for notching, slitting,
and slotting. A reliable addition to your shop
floor, this band saw doubles as a contour,
profile, and rip saw.
Accurate Gravity Feed
The EF1459 band saw has a capacity of 14½ inches
under the guides and a 9 inch cut. The blade and
vertical column travel on an inclined track that
feeds into the cut in a straight path. Gravity
enables the blade to find its most efficient feed
rate. Counterweight control provides adjustment
for optimum cutting pressure and long blade life.
The work piece remains stationary and your hands
need not be in the cutting area during cut-off, an
important safety feature.
Hydraulic Feed Control and Blade Shield
The Roll-In Saw Vertical EF1459 is equipped with
a hydraulic safety feed regulator and adjustable
saw blade guard. An adjustable stop can be pre-
set to control the depth that the blade travels
into the work.
High Quality Yet Cost-Effective
The Roll-In Saw EF1459 is equipped with a large,
rigid 18 ½ inch x 30 inch precision-ground table.
Hardened grooved roller guides allow blades from ¼
to ¾ inch wide without adjustment. Blade wheels
have rubber tires to prevent blade slippage. The
band saw comes furnished with an angle plate
swivel work block, large C-clamp, blade/speed
selector chart, blade, one horsepower motor and
switch.
Technical Data
Capacity Under Guides 14 ½”
Throat 8 ¾”
Blade Travel 9” Blade travel into work
Blade Size 3/4” Width x 8/12T x 10' Length .035
thick (bi-metal)
Guards Covers 4 step pulleys, blade and lower
wheel
Guide Rollers for Blade Width 1/4”, 3/8”, 1/2”,
5/8” and 3/4”
Blade Speeds 70, 140, 270 and 525 fpm
Table Precision ground, cast iron table, 18 ½” x
30”
Table Height 30" from floor
Wheels Cast iron, 14” x 1 1/8”
Wheel Tires Replaceable rubber
Motor 1 HP, 110/220V, 60-cycle single-phase;
Dimensions 30” Width x 66” Height x 40” Length
Shipping Weight 650 lbs. F.O.B Cleveland, Ohio
|
|