| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8050 | Horizontal Band Saws |
| 1999 |
AMADA |
HK400 |
Excellent |
Sold |
Photo /
More Info. |
| 15.5 inch rounds-Full Mitre Capability 45 Degree: This multi-purpose saw features rigid post construction, constant 8 degree ... |
|
| Ad # 6974 | Horizontal Band Saws |
| 1992 |
AMADA |
H-2000 |
Good |
Sold |
Photo /
More Info. |
| USED AMADA MODEL H-2000, LARGE CAPACITY HORIZONTAL BANDSAW: USED AMADA MODEL H-2000, LARGE CAPACITY HORIZONTAL BANDSAW
MAX, CUTTING CAPACITY: 2000 X 2000MM (78.74" SQUARE)
SIDE CUTTING CAPACITY: 2000 X 400MM (78.4 X 14.74")
BLADE SIZE: 120MM WIDE X 1.6MM THICK, X 1700MMM LONG (4.72" X .06" X 669")
TABLE SIZE: 2000 X 5000 MM (78.74 X 196.85")
TABLE TRAVEL: 4500MM (177.165")
TABLE FEED RANGE: 30-2000 MM/MINUTE
(1.18 X 78.74" /MINUTE)
MAX. WORKTABLE WEIGHT CAP: 100 TON
SAW BLADE DRIVE MOTOR: 15 HP
HYDRAULIC DRIVE MOTOR: 7.5 HP
COOLANT MOTOR: 0.5 HP
APPROX. SIZE: 6840 H X 8370 W X 11100 L MM
(22.44' X 27.46' X 36.42')
ESTIMATED FLOOR SPACE REQUIRED: 11000 X 12700MM (36.08' X 41.67') |
|
| Ad # 9683 | Horizontal Band Saws |
| — |
Amada |
H250-SA |
Good |
sold |
Photo /
More Info. |
| 10" rounds/10x11 rect. semi-Automatic: 25ft. infeed conveyor
10ft. of outfeed conveyor
step pulley
variable speed
88-262 ft. per. min
Capacity: 10" x 11"
Capacity: standard specs below please verify..
Rectangle (H x W) 6.8" x 11.8"
Round 10"
Square (H x W) 10" x 11"
Blade Speed (Variable) 88- 262 FPM
Max. Work Load 3,300 Lbs.
Blade Size 1" x 0.037" x 138"
Wheel Diameter 16"
Dimensions (L x D x H) 80" x 48" x 46"
Weight 1,350 Lbs.
Equipped With:
Hydraulic Quick Acting Vise
Discharge Table
Work Length Stop
Coolant System
Blade Brush
Horsepower: 3
TEMPORARY SPECIFICATIONS SUBJECT TO VERIFICATION. BUYERS RESPONSIBILITY TO VERIFY ALL SPECIFICATIONS.
ALL QUOTATIONS SUBJECT TO PRIOR SALE..
1" blade
10" round cap.
10x12" rectan.max
swivel miter vise
hydr. bundel clamping |
|
| Ad # 7437 | Horizontal Band Saws |
| 1986 |
Amada |
H-250-SA |
Good |
sold |
Photo /
More Info. |
| Amada H-250-SA Horizontal Bandsaw: 3 HP Main Motor
1/2 HP Hydraulic Motor
12" x 10" Rectangular Cutting Capacity |
|
| Ad # 8095 | Horizontal Band Saws |
| 2000 |
Amada |
HA250W |
Very Good |
Sold |
Photo /
More Info. |
| 10" round capacity , fully automatic W/ mtl shuttle: 10"+ round capacity , 12" x 12" rectangle
Chip conveyor
fully automatic with shuttle vise 22" stroke
blade tension
27-300 fpm adj.variable speed drive
3 HP
1-1/4" wide blade |
|
| Ad # 6607 | Horizontal Band Saws |
| 1985 |
AMADA |
HFA500 |
Needs Work |
Sold |
Photo /
More Info. |
| AMADA MODEL HFA500 AUTOMATIC HORIZONTAL BANDSAW : AMADA MODEL HFA500 AUTOMATIC HORIZONTAL BANDSAW MFD. 1985
CAPACITY: 20" ROUND
20" X 20" RECTANGULAR
BLADE SIZE: 2" X 229" X .055"
BLADE SPEEDS: VARIABLE 50 TO 393 FPM
BAND WHEEL DIAMETER: 20.9"
INDEX STROKE: 0.2" TO 19.7"
TABLE WEIGHT CAPACITY: 5,800 LBS.
MOTORS: 5 HP BLADE DRIVE
2 HP HYDRAULIC
EQUIPPED WITH:
AUTOMATIC STOCK FEED
MULTIPLE INDEXING
HYDRAULIC BLADE TENSION |
|
| Ad # 6939 | Horizontal Band Saws |
| 1987 |
AMADA |
HFA400S |
Very Good |
Sold |
Photo /
More Info. |
| AMADA MODEL HFA400S AUTOMATIC HORIZONTAL BAND SAW: AMADA MODEL HFA400S AUTOMATIC HORIZONTAL BAND SAW
Capacity: 16" x 16" (Rectangular)
16.14" (Rounds)
Load Capacity: 5733 Lbs
Blade Length: 16'5"
Blade Width/Gauge: 1-1/2" x .05"
Blade Speeds (Variable): 50 - 393 FPM
Feed Length (Variable): .394" - 99.999"
Maximum Number of Pieces to be Cut: 999 per Station
Table Height from Floor: 25-1/2"
EQUIPPED WITH:
99 Station Micro-Processor Back Gauge
Blade Breakage and Slip Detection
Automatic Bar Feed
Hydraulic Clamps
Variable Feed and Speed Control
Automatic Hydraulic Screw Type Chip Conveyor
Coolant System
1/4 HP AC Coolant Pump Motor
5 HP AC Main Drive Motor
2 HP AC Hydraulic Pump Motor
Electrical Controls |
|
| Ad # 13011 | Horizontal Band Saws |
| demo mac |
Birmingham |
RF-916V |
New |
sold |
Photo /
More Info. |
| 10" rounds or 5 x 16" rec-vari speed: Birmingham "made in taiwan" quality saw # RF-916V
cutting capacity: mitre vise jaws
at 0deg : 9" round or 5" x 16" rectangle
at 45 deg: 6" round or 6" x 7.5" rectangle
2HP motor
vari-speed drive: 75-402 FPM
blade size: 93" x 3/4" x .035"-verify
cast frame
variable down feed pressure
coolant
auto end of cut shut off
roll around caster base included
nice saw almost no use on it-like new
|
|
| Ad # 7167 | Horizontal Band Saws |
| — |
Carolina |
HV-12 |
Very Good |
SOLD |
Photo /
More Info. |
| Horizontal AND Vertical Portable 12" Band Saw : NOTE: This saw can be used in either Vertical or Horizontal modes
Capacity: 12"
Infeed Roller Table and Table is included
|
|
| Ad # 7864 | Horizontal Band Saws |
| — |
Carolina |
HV-20 |
Good |
Sold |
Photo /
More Info. |
| Horizontal + Vertical Band Saw, 110 Volt Single Phase: EQUIPPED WITH:
Quick Setting Vise, From 90 to 45 Degrees
Hydraulic Cylinder: Double Action, Manual Controlled
Gearbox: Oil Filled, Sealed Cast Iron Case, W/50:1
Ratio Worm Gear
CATALOGUE SPECIFICATIONS:
Capacity, Nominal.............. 8-1/2" x 13"
Blade Length....................... 9' 7-1/2"
Blade Width............................ 3/4"
Blade Thickness........................ .032"
(3) Blade Speeds,...................... 55, 108, 153 FPM
Motor, Horsepower/RPM.................. 3/4 HP/1725 RPM
Electrical System...................... 115/1/60
Floor Space Required, L x W............ 58" x 21"
Overall Height, Horizontal............. 37"
Overall Height, Vertical............... 60"
Weight, Approximately.................. 300 LBS |
|
| Ad # 12076 | Horizontal Band Saws |
| 1990s |
Carolina industrial Equip |
HV20 |
Excellent |
sold |
Photo /
More Info. |
| 10" rounds or 12" x 20": Carolina Industrial Equipment
HV20 Bandsaw
12" x 20"
110 Single Phase |
|
| Ad # 7439 | Horizontal Band Saws |
| 2000 ? |
Carolina Industrial Equip |
LDC712 |
Good |
sold |
Photo /
More Info. |
| 7" x 12" Horizontal Bandsaw: 7" x 12" Rectangular cutting capacity |
|
| Ad # 14296 | Horizontal Band Saws |
| ? |
Carolina Saw |
9" |
Good |
sold |
Photo /
More Info. |
| 9" Round;11" x 9 Rectangle,mite vise jaws: manual horizontal band saw for sale
capacity: 9" rounds
hyd downfeed adjustable
mitre vise jaws up to 45 degrees
110/1 voltage
3/4 HP motor
3/4" blade width |
|
| Ad # 10745 | Horizontal Band Saws |
| new |
Cosen |
MH-1016JA |
Excellent |
sold |
Photo /
More Info. |
| 10" rounds: SPECIFICATIONS
Round
90°-10" round
45°-9""
Square
90°-9” x 9"
45deg-6.5” x 6.5””
Maximum Cutting
Capacity:
Rectangle
90° H x W-9” x 14.5"
45° H x W-6.5” x 9”
Blade:
Speed-95, 150, 213, 321 fpm--step pulley change
Size-1" x 11’ x .035"
Guides-Tungsten Carbide
Motor: 2HP
Coolant
coolant motor-1/8 hp
Weight 1,010 lbs.
Power 230V, 3 ph, 60 Hz
Shipping Dimensions 72” x 38” x 45”
Floor Space (L x W x H) 69" x 28" x 42.5"
Machine Features:
Machine Structure & Design:
Heavy-duty hydraulic cylinder plus precision
ground hinge support and guide the rugged saw
frame through the entire cutting cycle
Special wear resistant DU bushing is used to
ensure durability and long use life
Cast iron quick set up vise features straight and
miter cuts from 90 to 45 degrees
It enables miter cutting at desired angles via
the large easy-to-read mitering scale
Large rugged base provides support for the heavy
cast, and it comes with built-in coolant &
hydraulic systems to offer both sound stability &
all-in-one convenience
Blade Drive:
A 2 hp motor, heavy-duty reducer, and variable
step drive assembly with excellent mechanical
design feature the essentials for production
cutting.
The 4-speed transmission is equipped with the
best worm gear speed reducer
The worm shaft is hardened and ground. Together,
they provide quiet, powerful, and trouble-free
drive
Blade Guidance & Lubrication System:
Carbide blade guides with roller bearings pre-
align the blade before entering carbide blade
guides This feature reduces wear on blade guides
and blade, thus enhancing blade life
The rigid guide arms are mounted on an extra wide
precision ground dovetail slide for more solid and
supportive surface
This rigid design owes to use of superior cast-
iron which greatly reduces vibration and achieves
better cutting result
Two additional guides located on a central axis
support the blade from the top, giving it extra
penetrating force
The carbide guides are relieved to allow coolant
flow to lubricate and cool the blade as well as
work piece
Integral coolant system.
Blade brush to remove chips from blade gullet
Control & Automation:
Down feed rate & cutting pressure contro
The feed rate may be adjusted by setting the dial
between 0 and 10 via the hydraulic down feed valve
The vast range of adjustment allows proper
setting which results in longer blade life,
shorter cutting times, and better finishes
The control panel is clearly arranged and
centrally located on top of saw head at chest
level
Material Clamping & Feeding:
Cast iron vises
Secure clamping via a dependable manual lead
screw system with anti-slip hand wheel
Safety:
Conduits protect all exposed electric wiring and
hydraulic circuits
Alert orange for blade guards and access doors
Standard Accessories:
Easy blade change with front access at waist
level
Adjustable material stop
Bi-metal saw blade
Operation & parts manual
|
|
| Ad # 4688 | Horizontal Band Saws |
| 1982 |
COSEN |
SA400 |
Good |
Sold |
Photo /
More Info. |
| 16" x 24" COSEN Horizontal Band Saw, Model SAH400: 16” x 24” SAH400 COSEN Horizontal Band Saw, new 1982
Maximum diameter of cut 16”
Maximum width of cut 24”
Blade size 1 ¼”
Equipped with:
Double vertical column design
Power vise
14” discharge tray
(2) dead entry rollers
Coolant
Wire brush
1 ½ H.P. hydraulic unit
5 H.P. 3/60/220-440 volt main-drive motor with controls
Wired for 3/60/220 volt operation
Dimensions: 92”LR x 45”FB x 90” High |
|
| Ad # 14156 | Horizontal Band Saws |
| 1996 |
Dake |
JH10 |
Good |
sold |
Photo /
More Info. |
| 10" round capacity or 18" flats: Dake #JH10 manual horizontal band saw
capacity:10" round capacity or 18" flats
blade width: 1"
motor: 1 HP
vise: swivel to 45 deg quick release
stock stop
hand feed adj hydraulic:on blade downfeed
blade speeds: 50,90,160,270 FPM
coolant system-3 gallon
|
|
| Ad # 9688 | Horizontal Band Saws |
| — |
Dake |
J |
Fair |
sold |
Photo /
More Info. |
| 12" rounds/16" flats: Kysor Johnson Model J Horizontal Manual Bandsaw Cutting capacities to 12" ... |
|
| Ad # 8569 | Horizontal Band Saws |
| 1997 |
Dake |
Shark 270 SX |
Good |
Sold |
Photo /
More Info. |
| 10.5 inch rounds: Horizontal band saw-mitre cutting
swing bow arm style
tall work height-ergonomic
10.5" round capacity
Semi-Automatic(cutting arm returns to top position at end of cycle)
2 speed cutting (only 1 speed working) needs minor repair selector switch replaced)
no conveyor |
|
| Ad # 14385 | Horizontal Band Saws |
| 1996 |
Dake |
JH10 |
Good |
sold |
Photo /
More Info. |
| 10" round capacity or 18" flats: Dake #JH10 manual horizontal band saw
capacity:10" round capacity or 18" flats
blade width: 1"
motor: 1 HP
vise: swivel to 45 deg quick release
stock stop
hand feed adj hydraulic:on blade downfeed
blade speeds: 50,90,160,270 FPM
coolant system-3 gallon |
|
| Ad # 10715 | Horizontal Band Saws |
| — |
Dake -Johnson |
J10 |
Good |
sold |
Photo /
More Info. |
| 10" rounds / 18" flats-manual saw : 10" rounds
18" flats
3/4" blade
speeds-50, 90, 160, 270, fpm
1 hp
variable downfeed control..
coolant-3 gallons
mitre vise jaws swivel
|
|
| Ad # 14275 | Horizontal Band Saws |
| — |
Do -All |
C 916 |
Good |
sold |
Photo /
More Info. |
| 11" Rounds 11 x 16": Do All Model C 916
11" Rounds
11" x 16" rec flat/bundle
1-1/4" Blade
Band Length 159 Inches
230 Volt 3 Phase
|
|
| Ad # 8355 | Horizontal Band Saws |
| 1980 |
Do All |
C-1216A |
Good |
sold |
Photo /
More Info. |
| 12" x 16" Flats: USED 12" X 16" DOALL HORIZONTAL BAND SAW
Capacity:12" x 16" Flats
15" Round
Band Wheels:16" Diameter
Blade Size:1.5" x 162" x .035"
Work Height:30"
Blade Speeds Approx.:40-450 FPM
EQUIPPED WITH:Automatic Shuttle Type Bar Feed
w/24" Stroke
Clamp & Feed Hydraulic Vises
Hydraulic Head Elevation
Index Length Control w/Digital Readout
Automatic Hydraulic Tension Control Centralized Control w/Push-Pull Buttons For Hydraulic Start-Stop; Band Start-Stop; Auto Cycle Start-Stop; Selector Switches For Index Reverse-Hold-Forward; Index Vise Open-Automatic-Clamp; Fixed Vise Automatic-Open-Clamp & Operation Manual-Automatic Joystick For Saw Head Up-Hold; Automatic-Down Coolant Pump & Motor w/Control For On-Off Band Speed Fast-Hold-Slow & Feed Force Control Gauges For Band Speed In FPM & Feed Force In PSI Power Driven Band Chip Removal Brush 1/3 HP 3450 RPM Coolant Pump Motor 2 HP 1800 RPM 230/460/3/60 Hydraulic Pump Motor
5 HP 1800 RPM 230/460/3/60 Main Motor
|
|
| Ad # 7440 | Horizontal Band Saws |
| — |
Do-all |
? |
Good |
Sold |
Photo /
More Info. |
| Doall Horizontal Bandsaw: 3 HP Main Motor
1/3 HP Hydraulic Motor |
|
| Ad # 2124 | Horizontal Band Saws |
| 1989 |
Do-All |
C-916M |
Good |
sold |
Photo /
More Info. |
| 10" Manual Horizontal band saw: 10" round capacity
9 x 16" rectangle capacity
coolant
1" blade width
2HP
mitre vise |
|
| Ad # 6567 | Horizontal Band Saws |
| — |
Do-All |
C-916 |
Excellent |
Sold |
No Photo /
More Info. |
| Do-All Model C-916 , 9" round capacity manual horizontal bandsaw: Do-All Model C-916 horizontal bandsaw,with one new 1" X 159" blade, gravity... |
|
| Ad # 6880 | Horizontal Band Saws |
| 2005 |
DoAll |
C-916A |
Very Good |
Sold |
No Photo /
More Info. |
| Automatic band saw 9 x 16": 9" x 16" capacity |
|
| Ad # 10160 | Horizontal Band Saws |
| 1997?? |
DoALL |
C-916 |
Very Good |
Sold |
Photo /
More Info. |
| 10-3/4" rounda;9 x 16 retangle capacity: CAPACITY: 9" X 16" FLATS / 10-3/4" ROUNDS
BAND WHEELS: 14-1/2" DIAMETER
BLADE SIZE: 159" L X 1" W
WORK HEIGHT: 26"
BLADE SPEEDS APPROX: 105 - 275 FPM
O.A.D.: 86" L-R X 26" F-B X 53" H
APPROX WEIGHT: 1,500 LBS
EQUIPPED WITH:
HYDRAULIC FEED CONTROL & HEAD
RELEASE VALVE
5-1/2" HIGH VISE WITH HAND LEVER FOR CLAMPING
RECIRCULATING COOLANT PUMP & CHIP PAN
SAW BLADE ADJUSTMENT GUIDE
PUSH BUTTONS FOR START - STOP
SELECTOR SWITCH FOR COOLANT - ON - OFF
V/S DRIVE ADJUSTMENT VIA HANDWHEEL
2 HP 1800 RPM 230/460/3/60 MOTOR, wired 460/3
|
|
| Ad # 15131 | Horizontal Band Saws |
| — |
DoALL |
C1216A |
Fair |
sold |
Photo /
More Info. |
| 12 X16: Used machine, was working when picked up. Customer
traded it out after purchasing new machine. 12X16
rect. capacity, 1-1/4" blade automatic stock feed
with discharge tray and power feed and gravity
conveyors 10' Each |
|
| Ad # 10472 | Horizontal Band Saws |
| — |
DOALL |
C-68 |
Very Good |
SOLD |
No Photo /
More Info. |
| 12" DIA.: SAW HAS HYDRAULIC POWER FEED, RUNS GOOD, BUT NEEDS A GOOD CLEANUP, AND ONE ... |
|
| Ad # 12505 | Horizontal Band Saws |
| 1985 ? |
DoAll |
C-916 |
Good |
sold |
Photo /
More Info. |
| 9"x16" flats / 10-3/4" rounds: One Used - Doall 9" x 16" Horizontal Band Saw
Model# C-916 manual saw
CAPACITY: 9" X 16" FLATS / 10-3/4" ROUNDS
BAND WHEELS: 14-1/2" DIAMETER
BLADE SIZE: 159" L X 1" W
WORK HEIGHT: 26"
BLADE SPEEDS APPROX: 105 - 275 FPM
O.A.D.: 86" L-R X 26" F-B X 53" H
APPROX WEIGHT: 1,500 LBS
EQUIPPED WITH:
mitre cutting swivel vise
HYDRAULIC FEED CONTROL & HEAD
RELEASE VALVE
5-1/2" HIGH VISE WITH HAND LEVER FOR CLAMPING
RECIRCULATING COOLANT PUMP & CHIP PAN
SAW BLADE ADJUSTMENT GUIDE
PUSH BUTTONS FOR START - STOP
SELECTOR SWITCH FOR COOLANT - ON - OFF
V/S DRIVE ADJUSTMENT VIA step pulley
2 HP 1800 RPM 230/460/3/60 MOTOR
|
|
| Ad # 13129 | Horizontal Band Saws |
| — |
DoAll |
C-4 |
Fair |
sold |
Photo /
More Info. |
| 12" round: Stationary machine Is fairly light weight and compact idea in
a smaller shop. Has a separate unit to hold the cutting oil
and pump that plugs into saw unit. |
|
| Ad # 15248 | Horizontal Band Saws |
| 1984 |
DoAll |
C-916 |
Good |
sold |
Photo /
More Info. |
| 9" round: DoAll C-916 manual band saw
9" round,9 x 16" rectangle
step pully drives
manual vise
conveyor included: 8ft outfeed ,20ft infeed
|
|
| Ad # 8356 | Horizontal Band Saws |
| — |
Doall |
C-916 |
Good |
sold |
Photo /
More Info. |
| 9" x 16" Flats: USED 9" x 16" DOALL HORIZONTAL BAND SAW
Capacity:9" x 16" Flats
10-3/4" Rounds
Band Wheels:14-1/2" Diameter
Blade Size:159" Long x 1" Width
Work Height:26"
Blade Speeds Approx:105-275 FPM
Equipped With:Hydraulic Feed Control & Head
Release Valve
5-1/2" High Vise With Hand Lever
For Clamping
Recirculating Coolant Pump &
Chip Pan
Saw Blade Adjustment Guide
Power Driven Band Chip Removal
Brush
Push Buttons For Start-Stop
Selector Switch For Coolant
On-Off
Emergency Stop Button
V/S Drive Adjustment Via Handwheel
2 HP 1800 RPM 230/460/3/60 Motor
|
|
| Ad # 16044 | Horizontal Band Saws |
| 1998 |
Ellis |
1600 |
Fair |
sold |
Photo /
More Info. |
| 10" rounds mitre cutting: Ellis 1600 band saw
Built in protractor for fast and accurate selection of angles
Stock remains in one position for all cuts
Head moves left or right for angle cuts
Quick conversion from horizontal to vertical saw (optional table needed for vertical sawing)
Capacity to cut 10 In. round at 90
10 In. wheels-standard
Heavy steel, welded & machined for accuracy & durability
10 Ft. x 1 In. x 0.035 In. blade size
Quick adjusting vise
Amperage (A)
23
Application
Metal cutting
Assembled Weight (lbs)
481
Band Saw Frame Material
Steel
Band Saw Type
Portable
Blade Guide Type
Bearings
CSA Certified
Yes
Color / Finish
Green
Cord Length (ft)
6
Country of Origin
USA
Cutting Capacity - Depth of Throat (in)
11
Cutting Capacity Height (in)
11
Dust Blower
No
Dust Port
No
Dust Port Outside Diameter (in)
0
ETL Listed
No
Fence Included
No
Horsepower (hp)
1
Internal Supplier Part #
1600
Maximum Blade Length (In) 120
Maximum Blade Width (In) 1
Maximum Feet Per Minute 250
Maximum RPM 3450
Minimum Blade Width (in) 1
Minimum Feet Per Minute 70
Single Phase
16 In. Vertical Band Saw
Saw Wheel Material Aluminum
Speeds 3
Stand Included
Yes
Table Height From Floor (In)
47
Table Length (in)
59
Table Material
Steel
Table Tilt Left (Deg)
45
Table Tilt Right (Deg)
45
Table Width (in)
24
Thrust Bearing Contact Point
Edge
UL Listed
Yes
Voltage 110/220 Volts
Wheel Diameter (in) 8
|
|
| Ad # 12406 | Horizontal Band Saws |
| 2000s |
Ellis |
1100 |
Good |
sold |
Photo /
More Info. |
| 8" x 10" Round 8": Ellis Model 1100 Bandsaw
8" x 10"
8" Round
Miter 45 degrees
70-135 FPM |
|
| Ad # 9750 | Horizontal Band Saws |
| 2003 |
Ellis |
1800 |
Good |
Sold |
Photo /
More Info. |
| 11" round cap: Head Moves Left or Right for Angle Cutting
Built-in Protractor for Fast and Accurate Selections of Angles
Stock Remains in One Position for All Cuts
Capacity to Cut 11" Round at 90°
Capacity to Cut 10" Pipe at 90°
Capacity to Cut 14" Flat at 90°
Specifications 1800
Capacity 11" Round at 90°
. 10" Pipe at 90°
. 14" Flat at 90°
. 11" H x 10" W at 90°
. 9" Round at 45°
. 8" Pipe at 45°
. 9" Flat at 45°
. 11" H x 6" W at 45°
Blade Speeds 70-135-230 FPM
Blade Size 11'0" x 1" x .035
Head Pressure Hydraulic Cylinder
Vise Quick Adjusting
Shut Off Automatic
Motor 1 H.P.
. 110/220 Single Phase
. 3 PH
Shipping Weight 640 lbs.
Size Table Height 28
. Length 66"
. Width 29 "
. Height 47"
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Durability
Ad Summary:
Mitre Band Saw, 11" Round at 90°, 14" Flat at 90°, Blade size 11'0" x 1" x .035
Optional Equipment
Item No. Description Price
.. Vertical Table 11" x 20" with Blade Guard and Post
. Single Stock support Stand 5' Long - 1 Roller
. Stock Stand with Adjustable Gauge 2 Rollers
|
|
| Ad # 11231 | Horizontal Band Saws |
| 2007 |
Ellis |
1800 |
Very Good |
sold |
Photo /
More Info. |
| 11" round , 14" flats ;mitre head saw: 1800 Mitre Band Saw
Features
Head of band saw moves left or right for angle cutting
Built-in Protractor for fast and accurate selection of angles
Stock remains in one position for all cuts
Specifications 1800 Mitre Band Saw
Capacity 11” Round at 90°
10” Pipe at 90°
14” Flat at 90°
11” H x 10” W at 90°
9” Round at 45°
8” Pipe at 45°
9” Flat at 45°
11” H x 6” W at 45°
Blade Speeds 70-135-230 FPM
Blade Size 11’0” x 1” x .035
Head Pressure Hydraulic Cylinder
Vise Quick Adjusting
Shut Off Automatic
Motor 1 H.P. 110/220 Single Phase or 3 PH 220-440-460-480
Shipping Weight 640 lbs.
Size Table Height 28
Length 66”
Width 29 “
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Durability
Accessories
Stock stand with rollers
blade
Note: very low hrs of use...very good condition... |
|
| Ad # 11180 | Horizontal Band Saws |
| 2006 ? |
Ellis |
1800 |
Good |
sold |
Photo /
More Info. |
| 11" round : Ellis 1800 Horizontal band saw
1800 Mitre Band Saw
Capacity 11” Round at 90°
10” Pipe at 90°
14” Flat at 90°
11” H x 10” W at 90°
9” Round at 45°
8” Pipe at 45°
9” Flat at 45°
11” H x 6” W at 45°
Blade Speeds 70-135-230 FPM
Blade Size 11’0” x 1” x .035
Head Pressure Hydraulic Cylinder
Vise Quick Adjusting
Shut Off Automatic
Motor 1 H.P. 110/220 Single Phase 3 PH 220-440-460-480
Shipping Weight 640 lbs.
Size Table Height 28
Length 66”
Width 29 “
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Dura
|
|
| Ad # 11232 | Horizontal Band Saws |
| 2005 |
Ellis |
1600 |
Good |
sold |
Photo /
More Info. |
| 10” Round at 90°, 8"pipe 11" flat: 1600 Mitre Band Saw
Head of band saw moves left or right for angle cutting
Built-in protractor for fast and accurate selection of angles
One-step conversion from horizontal to vertical band saw
Stock remains in one position for all cuts
Portable-this band saw moves easily to the job site
Specifications 1600 Mitre Band Saw
Capacity 10” Round at 90°
8” Pipe at 90°
11” Flat at 90°
6 7/8” Round at 45°
6” Pipe at 45°
7 1/4” Flat at 45°
Blade Speeds 70-135-250 FPM
Blade Size 10’0” x 1” x .035
Head Pressure Hydraulic Cylinder
Vise Quick Adjusting
Shut Off Automatic
Motor 1 H.P. 110/220 Volt Single Phase
Portable 10” Wheels-Standard
Shipping Weight 481 lbs.
Size Table Height 27”
Length 59”
Width 24 “
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Durability
Accessories
|
|
| Ad # 9079 | Horizontal Band Saws |
| 1998 |
Ellis Mitre Bandsaw |
3000 |
Very Good |
Sold |
Photo /
More Info. |
| 13.5 in round, 13 x 19 rectangle-mitre head: Ellis Mitre Band Saw model #3000.
mitre head swivels
Blade size is 13'-6" x 1" x .037; capactities are 12.75" round at 45 degrees, 13 1/2" round at 90 degrees and 19" flat at 90 degrees
wired 220/1 phase
includes (2) 10ft sections of conveyor |
|
| Ad # 10986 | Horizontal Band Saws |
| 1998 |
HE&M |
H90A-1 |
Good |
sold |
Photo /
More Info. |
| 12-3/4" round x 12 3/4" flat: Blade size - 1" x 12' 10" x .035"
3 hp motor
Control console on top of saw arm
Semi auto or fully automatic modes
Out of stock switch
Blade break switch
Shaft driven power blade brush
Variable vise pressure
2 each hold down fixtures
Feed table with mechanical digital readout
Vertical alignment bar
Flood coolant system
Wash down hose
18" exit support
0 - 24" stroke - single index
Reduced capacity top clamp - main vise
Reduced capacity top clamp - feed vise
24" solid discharge table |
|
| Ad # 3301 | Horizontal Band Saws |
| 1982 |
HEM |
1200A |
Needs Work |
Sold |
No Photo /
More Info. |
| Semi Automatic Band Saw: 16" capacity round
20" flat bar capacity
1-1/4" blade
|
|
| Ad # 11314 | Horizontal Band Saws |
| 1990s? |
HYD Mech |
S-20 |
Very Good |
sold |
Photo /
More Info. |
| Mittering Bandsaw 2 hp 13" x 18" rectangle 13" round : HYD Mech-S-20 auto feed saw
60 Degree Mitering
2 hp
Blade speeds 90 ft/min to 370 ft/min
13" Round Capacity
13" x 18" capacity at 90 degrees
Quick locking vise
Coolant system |
|
| Ad # 15201 | Horizontal Band Saws |
| — |
Hyd Mech |
S-20 |
Good |
sold |
Photo /
More Info. |
| 13" round: Hydmech S-20 manual scissor style horizontal
mitre pivot band saw
The S-20 manual band saw features a swing
head design and provides exceptional miter
cutting capability for light to medium duty
applications.
Featuring a 13″H x 18″W capacity at 90°, 3
HP motor, and 1″ blade, the S-20 is a versatile
machine ideal for use in tight working spaces.
Rectangular Capacity at 90° -13” H x 18” W
Round Capacity at 90° :13″
Blade Dimensions :1” x 14′ 10”
Blade Drive 2 HP
Blade Speed 45-330 sfm
Coolant Tank Capacity 6 US gal
Machine Weight 2,200 lbs
Machine Dimensions :92” W x 75” L x 52” H
Std features:
Easy swing, heavy duty cast iron saw
head
2 HP direct blade drive
36” material in-feed roller table and
19” out feed table
Heavy duty sliding vise jaw
Mechanical band tensioning
Cast iron band wheels
Swing away control
Replaceable blade brush
Robust steel base
Easy to read angle scale with angle
locking mechanism
Cast iron guide arms. Idler side guide
arm is adjustable and supported by linear rail.
Gravity head feed
Replaceable carbide guide inserts
Safety door interlocks
Flood coolant with wash down hose
Laser light
Work light
|
|
| Ad # 12393 | Horizontal Band Saws |
| 2001 |
Hyd-Mech |
DM-10 |
Good |
sold |
Photo /
More Info. |
| 9-3/4" Round 11" x 7.5": Hyd-Mech DM-10
220 Volts
Capacity at 90°: Rectangular 7.75" x 11"
Square 9"
Round 9.75"
Blade Size: 1"
HP: 2/2.5 HP
Operation: Manual
Mitering?: 60° left, 45° left and right
|
|
| Ad # 16029 | Horizontal Band Saws |
| — |
Hyd-Mech |
S-20 |
Good |
sold |
Photo /
More Info. |
| 20 ton: Lightly used Hyd-Mech S-20, comes complete and
with 8' roller table for material feed. We have
forklift to load and unit is already on a pallet.
Not sure of the exact year, looks to mid 1990's.
std mfg specs below -please verify actual machines..
YDMECH’s S-20 Manual Miter Cutting Band Saw was the first band saw to incorporate a swing head design for miter cutting. These innovations have been at the core of the HYDMECH trademark. These versatile, scissors-style machines are designed for multiple light/medium duty applications and are ideal for use in tight working spaces and cutting tight angles into a variety of materials. This band saw features a 13″H x 18″W capacity at 90°, 3 HP motor, and 1″ blade, which makes this a versatile metalworking machine ideal for metal fabrication shop
Detailed Specifications
Rectangular Capacity at 90°13” H x 18” W330 mm H x 457 mm W
Round Capacity at 90°13″330 mm
Blade Dimensions1” x 14′ 10”25.4 mm x 4521 mm
Blade Drive3 HP VFD2.2 kW VFD
Blade Speed45-330 sfm13-100 m/min
Coolant Tank Capacity6 US gal22 liters
Machine Weight2,200 lbs997 kg
Machine Dimensions92” W
75” L
52” H2337 mm W
1905 mm L
1320 mm H |
|
| Ad # 16045 | Horizontal Band Saws |
| 2007 |
Hyd-Mech |
S20-m |
Good |
sold |
Photo /
More Info. |
| 13″H x 18″W capacity at 90°: Hyd mech S20-M band saw: series 3
miter cutting capability for light to medium duty applications.
3HP motor
1" blade
rec cap at 90deg: 13H x 18"W
blade speed 45-330sfm
coolant 6 gallon
std mfg specs below
Easy swing, heavy duty cast iron saw head
3 HP true direct blade drive – no belts/pulleys
36” material in-feed roller table and 19” out feed table
Heavy duty sliding vise jaw
Mechanical band tensioning with digital readout
Cast iron band wheels
Swing away control
Replaceable blade brush
Robust steel base
Easy to read angle scale with angle locking mechanism
Cast iron guide arms. Idler side guide arm is adjustable and supported by linear rail.
Gravity head feed
Replaceable carbide guide inserts
Safety door interlocks
Flood coolant with wash down hose
Laser light
Work light
Fully functioning saw it will miter
this is a series 3 |
|
| Ad # 13778 | Horizontal Band Saws |
| 2011 |
import |
4 x 6 |
Good |
sold |
Photo /
More Info. |
| 4 x 6" rec or 3" rounds: horizontal/vertical universal band saw
4 x 6" rectangle or 3" round capacity
step pulley speed change
110/1 voltage
1/2" HP
mitre swivel vise
nice little saw |
|
| Ad # 7583 | Horizontal Band Saws |
| — |
Import |
— |
Good |
sold |
Photo /
More Info. |
| 12" Fully Automatic Shuttle feed saw: Great Buy!!!!
12" rounds
12 x 16" rec
Fully Automatic Horizontal
no mitre
Bandsaw...5HP..control feeder w/ height selector...uses 1" blade...automated counter...start it up it will run all day!!!! |
|
| Ad # 7868 | Horizontal Band Saws |
| 2004 |
Import |
4.5in ROund Capacity |
Very Good |
Sold |
No Photo /
More Info. |
| 4.5" Round Horiz + Vertical, Portable Band Saw with Miter Vise, 110 V: Capacity:
Round: 4-1/2"
Rectangle: 4" x 6"
Blade: 1/2" Wide
Miter Vise - 45 or 90 deg
Portable (Castors)
110v/single phase supply |
|
| Ad # 9077 | Horizontal Band Saws |
| 1997 |
Import |
J0514 |
Very Good |
Sold |
Photo /
More Info. |
| 9 x 16 rec capacity--9" rounds: Horizontal Band Saw
9 x 16 rec capacity, 9in round
HP 1.5. motor
swivel vise
coolant
step pulley speed change
1" blade |
|
| Ad # 8547 | Horizontal Band Saws |
| — |
jet |
hvbs-463/414456 |
Very Good |
Sold |
Photo /
More Info. |
| 1/2 blade x64 1/2 6" rounds : Horizontyal & vertical cutting
Jet 5'' x 6'' Horizontal-Vertical Bandsaw
1/2HP, IPh, 115/230V, Prewired 115V.
Round Capacity at 90° (in.) 5.
Round Capacity at 45° (in.) 3.
Rectangle Capacity at 90° (in./W x H) 5x6.
Rectangle Capacity at 45° (in./W x H) 5x3.
Throat Depth (in.) 6.
Vertical Worktable (in.) 9-5/8 x 9-1/2.
Vise Swivels 45°.
Blade Size (in.) 1/2 x .025 x 64-1/2.
Blade Wheel Diameter (in.) 7-3/8.
Blade Speeds (SFPM) 80, 120, 200.
Bed Height (in.) 25-1/2.
Floor Space Required (in.) 19x44.
Net Weight (Ibs.) 115,
Additional shipping charges apply.
Includes: Vertical worktable, Carbon steel blade, Adjustable material stop.
FEATURES: UL listed single phase motor. Exclusive design heavy-duty 14-gauge stand. Large diameter wheels and built-in handle allows easy movement. Front legs feature adjustable leveling pads. Ball bearing supported blade wheel. Fully adjustable ball bearing blade guides. Heat-treated and ground steel worm gear with bronze drive gear. Three blade speeds to choose from. Automatic shut-off after cut.
on wheels made in tiawan |
|
| Ad # 13349 | Horizontal Band Saws |
| 2012 |
Jet |
HVBS-7MW/414459 |
Excellent |
sold |
Photo /
More Info. |
| 7 x 12 rec: Used Jet HVBS-7MW manual Horizontal saw
Capacity of 7-Inch-by-12-Inch; vise will swivel up to 45-Degree
Powered by a 3/4 horsepower 115-Volt motor
Blade speed can be set manually at 85, 130, 180, 285-Feet per minute
Throat depth is 5-Inch
Able to power through a range of materials, the Jet HVBS-7MW Horizontal/Vertical Bandsaw is great for your home shop or job site use. With its high capacity, swivel vise, and robust 3/4 HP, 115-volt motor, this bandsaw gets the job done quickly and efficiently. It also includes a complete coolant system, vertical worktable, chip brush, adjustable material stop
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
Cast Iron Construction and Hardened, Ground Worm Gear for Durability
Designed to provide consistent performance even after years of heavy use, this bandsaw boasts sturdy construction, including a heavy cast iron bow and bed, as well as hardened and ground worm gear for extraordinary durability.
Automatic Shut-Off and Coolant System for Safety
To help prevent accidents or loss of control, the saw automatically shuts off after each cut, while a complete coolant system delivers coolant through the blade guides to prevent over-heating and helps ensure smooth, continuous operation.
Adjustable Roller Blade Guides and Material Stop for Precision
For added convenience, the HVBS-7MW features adjustable roller blade guides and an adjustable material stop to accommodate different materials. There's also a chip tray built right in the roller tray to help keep your workspace free of dust and debris, which helps maintain visibility as you work
Product Description
Slices most metals smoothly and quickly. Complete coolant system and automatic shutoff after cut. Cast iron bow and bed. Straight & angle cuts, horizontal & vertical cuts. Roller cabinet has built-in chip tray and chip brush. Adjustable roller blade guides and material stop. 9 3/8in. x 10in. vertical table. HP: 3/4, Cutting Capacity - Flat Stock (in. x in.): 7 x 10 7/8, Cutting Capacity (SFPM): 0-285, Blade Size L x W x Thickness (in.): 90 x 3/4 x .035, Stand Included: Yes, Volts: 115, Blade Type: Bi-metal, UL Listed: Yes, Cordless: No, Variable Speed: Yes, Blade Included: Yes, Cutting Depth at 90deg (in.): 7, Dimensions L x W x H (in.): 49 1/2 x 20 1/2 x 38, Case Included: No, Cutting Angles: 45-90 |
|
| Ad # 10783 | Horizontal Band Saws |
| 2003 |
JET |
HVBS-7MW |
Excellent |
SOLD |
Photo /
More Info. |
| 7" x 12" rectagle: 7" round: 7" x 12" rectangular, 7" round
horiz / vert band saw , exellent cond., blade coolant system, adj. vise angles, hyd. blade feed, auto shut off, adj. speeds, wheel mounted base, verticle base plate, like new mounted blade, two new blades |
|
| Ad # 14878 | Horizontal Band Saws |
| 2008? |
Jet |
# 414468 |
Good |
sold |
Photo /
More Info. |
| 10" rounds or 9 x 16" rec: Jet Horizontal band saw # 414468
capacity: 10" rounds or 9 x 16" rec: max
The HBS-916W features a large handwheel and
built-in gauge for easy blade tensioning. Coolant
is distributed through the blade guides, and the
blade guides feature parallel double-row ball
bearing support. Quick-positioning vise with fully
adjustable jaws swivels to 45°
Features + Benefits
•Built-in, self-propelled blade brush
•Fully guarded blade regardless of blade guide
position
•Fully adjustable hydraulic downfeed with
separate on/off valve
•Automatic shut-off after cut
Cutting Depth at 45°(in.)9 round;9 x
14rectangle
Cutting Depth at 90° (in.) 9"
Cutting Capacity:Flat Stock(in. x in.)9 x 6 1/8
Blade Size:LxWxThickness(in.)1 x .035 x 119-1/2
Cutting Capacity:(SFPM)82/132/170/235(step
pulleys)
Volts 115/230 (prewired 115V)
HP: 1.5 motor
notes:sells new for $3700.00,nice little saw! |
|
| Ad # 9129 | Horizontal Band Saws |
| ?? |
Jet |
HBS-10M/118-101 |
Good |
Sold |
Photo /
More Info. |
| 10.5 in round --10 x 18 rectangles-manual saw: Manual saw
10.5 in round cap
10 x 18 rectangles
1" blade
feed rate adj
mitre vise jaws
step pulley speed 75, 130, 180, 220 FPM |
|
| Ad # 10088 | Horizontal Band Saws |
| 70's |
Johnson |
— |
Good |
Sold |
Photo /
More Info. |
| 10" High x 16" Wide x 3/4" Blade: Johnson Saw, heavy duty metal cutting band saw. This is a real saw, solid,... |
|
| Ad # 9510 | Horizontal Band Saws |
| — |
Johnson |
— |
Good |
SOLD |
Photo /
More Info. |
| 10"?: Nice little saw. Good for home shop. |
|
| Ad # 12149 | Horizontal Band Saws |
| — |
Johnson |
— |
— |
sold |
Photo /
More Info. |
| —: good machine |
|
| Ad # 12145 | Horizontal Band Saws |
| — |
Johnson |
— |
Good |
sold |
Photo /
More Info. |
| —: Great saw can be used portible or in shop has large caster wheels on it to ... |
|
| Ad # 9657 | Horizontal Band Saws |
| — |
JOHNSON |
Mod "J" |
Good |
Sold |
Photo /
More Info. |
| 10in Horizontal Electric Band Saw: 10 1/2" round
10 1/2" x 18" rectangular
manuel 23" material stop
Step pulley ratio
w/ blade coolant
10' of "in feed" conveyer |
|
| Ad # 12150 | Horizontal Band Saws |
| — |
Johnson Kysar |
— |
— |
sold |
Photo /
More Info. |
| —: saw has a 12" openning |
|
| Ad # 9179 | Horizontal Band Saws |
| ?? |
Kalamazoo |
HBS-1018 |
Very Good |
Sold |
Photo /
More Info. |
| 10 in round or 10 x 18 rectangle-single phase: 10 inch round capacity
10 x 18" rectangle
2 HP
1 in blade
coolant
on casters
spep pulley drive
speed range 60-300FPM
Mitre vise jaws..
|
|
| Ad # 12546 | Horizontal Band Saws |
| — |
Kalamazoo |
H9AW |
Good |
sold |
Photo /
More Info. |
| 16" x 9" : Kalamazoo Saw #H9AW
16" x 9" rectangle capacity max
9" Round max capacity
|
|
| Ad # 15629 | Horizontal Band Saws |
| — |
Kalamazoo |
816c |
Good |
sold |
Photo /
More Info. |
| 9x18: good working order. was working when shop was shut down 6
years
ago. |
|
| Ad # 8358 | Horizontal Band Saws |
| — |
Kalamazoo |
— |
Good |
Sold |
Photo /
More Info. |
| 8" x 16" Flat: USED 8" X 16" KALAMZOO HORIZONTAL BAND SAW
Capacity:8" x 16" Flat
8" Round
Wheel Diameter:14"
Band Width:3/4"
Band Length:10'5"
Band Thickness:.032"
Work Height:26"
Blade Speeds Approx.:53-96-160-266 FPM
EQUIPPED WITH:Pushbuttons For Start & Stop
4-3/4" High Vise Hand Wheel to Open & Close Vise Micro-Switch For Auto-Stop
3/4 HP 1445 RPM 220/440/3/60 Motor
|
|
| Ad # 12273 | Horizontal Band Saws |
| — |
Kalamazoo |
9AW |
Good |
sold |
Photo /
More Info. |
| 13" rounds : Kalamazoo 9AW horizontal saw
13" HORIZONTAL BAND SAW, Kalamazoo 9AW
9" X 12" KALAMAZOO HORIZONTAL BAND SAW
MODEL: 9AW
CAPACITY AT 90 DEG. ROUND .......... 9"
RECTANGLE .......................... 9" X 13"
CAPACITY AT 45 DEG. ROUND .......... 8"
RECTANGLE .......................... 8" X 8"
VISE OPENING ....................... 16"
SPEED RANGE ........................ 62-390 FPM
HP ................................. 2 HP
mitre vise jaws
on casters
coolant
110/1 voltage
BLADE SIZE .........................
1"x.035"x10'10 1/2"
FLOOR TO WORKING SURFACE ........... 25 1/2"
WEIGHT ............................. 892 LBS
|
|
| Ad # 3188 | Horizontal Band Saws |
| — |
Kalamazoo |
8CW |
Good |
Sold |
Photo /
More Info. |
| Kalamazoo Horizontal Band Saw: 3/4" Blade
Cuts 9" Round, 16" x 9" Rectangular
Step pulley speed control
On casters |
|
| Ad # 11804 | Horizontal Band Saws |
| — |
Kalamazoo |
9AW |
Good |
sold |
Photo /
More Info. |
| 13" rounds: Kalamazoo 9AW horizontal saw
13" HORIZONTAL BAND SAW, Kalamazoo 9AW
9" X 12" KALAMAZOO HORIZONTAL BAND SAW
MODEL: 9AW
CAPACITY AT 90 DEG. ROUND .......... 9"
RECTANGLE .......................... 9" X 13"
CAPACITY AT 45 DEG. ROUND .......... 8"
RECTANGLE .......................... 8" X 8"
VISE OPENING ....................... 16"
SPEED RANGE ........................ 62-390 FPM
HP ................................. 2 HP
mitre vise jaws
on casters
coolant
110/1 voltage
BLADE SIZE ......................... 1"x.035"x10'10 1/2"
FLOOR TO WORKING SURFACE ........... 25 1/2"
WEIGHT ............................. 892 LBS |
|
| Ad # 13092 | Horizontal Band Saws |
| 2006 |
KMT |
H310SA |
Good |
sold |
Photo /
More Info. |
| 10" rounds or 5-11/16" x 11" rectangle: KMT H310SA semi-automatic mitre cutting Horizontal band saw
Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models.
Standard Equipment Includes:
Full Electronic Control / Information System
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Heavy Duty Vari-Speed, Totally Enclosed Transmission
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Sawframe setup, controlled rate & rapid approach
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Specifications:
HP: 2
Blade Length: 9’1”
Blade width: 1”
Blade Speeds: Variable 55-330fpm
Max vise opening: 11.25 (in)
Weight 1000
Coolant capacity: 5 gallons
Work Height: 37”
Capacity :mitre
90 deg 10"
9 square
5 11/16 x 11 rec
45 (l) deg mite cap
6.25 round
7 square
4 x 7 7/8 rectangle
60 (r) deg mitre
5 round
3.75 square
3.5 x 5 1/8 rec
includes infeed & outfeed conveyors :6ft
|
|
| Ad # 14181 | Horizontal Band Saws |
| 2002 ? |
Kysor |
KJ10 |
Excellent |
sold |
Photo /
More Info. |
| 10" x 18" : Kysor Horizontal Band Saw
Model: KJ10
Capacity: 10" x 18"
Electrical: 220/3 phase |
|
| Ad # 14758 | Horizontal Band Saws |
| — |
Kysor-Johnson |
J |
Good |
sold |
Photo /
More Info. |
| 10" round:220/1 phase: Kysor-johnson # J horizontal band saw
Capacity:10" round,10"-1/2" x 18" rectangular
mitre vise jaws
Step pulley ratio
hyd. down feed
w/ blade coolant
mounted on roll around casters
3-4 spare blades included
Voltage:110 or 220/1(single Phase)
|
|
| Ad # 12913 | Horizontal Band Saws |
| 1984? |
Kysor/Johnson/Dake |
JW |
Good |
sold |
Photo /
More Info. |
| 10" round or 18" flat capacity: Kysor/Johnson/Dake model JW manual horizontal band saw
110/1 single phase-great for home shop
10" round cap
18" flats cap
base on casters
coolant pump
3/4" x 137"" blade
Hyd. feed blade down force w/ adj weight
3/4 HP main motor
mitre vise jaws to 45deg
blade speed: 35,90,130,190FPM step pulley change
on roll around casters
Note:this is a great heavy duty saw cuts straight!
includes manual |
|
| Ad # 8354 | Horizontal Band Saws |
| — |
Marvel |
15A4/M1 |
Good |
Sold |
Photo /
More Info. |
| 15" x 20" Mild Steel: USED 15" X 20" MARVEL HORIZONTAL HYDRAULIC SAW
w/Automatic Shuttle Bar Feed
Capacities:15" x 20" Mild Steel
15" Round - Mild Steel
Wheel Diameter:22"
Band Length:15'6"
Band Width:1-1/4"
Work Height:30"
Speeds Approx.:50 - 400 FPM
EQUIPPED WITH:Automatic Hydraulic Shuttle Stock
Feed w/0 - 24" Stroke
Multiple Indexing
Free Standing Control w/Coolant
Off-On; Shuttle Selector Manual
Automatic; Blade Speed Low -
High; Feed Traverse Control &
Feed Pressure Gauge
Selector Switch For Rapid Up &
Rapid Down
Work Height Selector & Blade Guide
Coolant Systems w/Pump
Pushbuttons for Start - Stop
2 HP Hydraulic Pump Motor
|
|
| Ad # 13701 | Horizontal Band Saws |
| — |
Marvel |
916S |
Good |
sold |
Photo /
More Info. |
| 9" x 16" rec cut saw: Marvel 916S semi-automatic band saw
General Specifications As Per Brochure:
Bed:
Bed Height From Floor: 24-3/4"
Vise Jaws Size: 13-1/2" x 5-1/2" & 10-3/4" x 5-1/2"
Cutting Capacities:
Round: 9"
Rectangular: 9" x 16"
Blade: 1" width
Blade Wheel: 14-1/4" diameter
Blade Size: 132"
Blade Speeds Range: 70 - 280 fpm
General:
Motor: 2 Horsepower
1.5 kW, 220 / 440 Volt,
1,720 rpm, 6 / 3 Amps, 60 Hz
Electrical: 220 / 440 Volt, Three Phase
Overall Dimensions (approx.): 61" x 32" x 47" tall
Equipped with
Semi-Automatic Operation
Infinitely Variable Blade Speeds
Power Vise Clamping System
Coolant System |
|
current group
groups previously viewed
groups not yet viewed
