Year:
| 1982
|
Make:
| BURGMASTER
|
Model:
| 2DCP
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2,500 Lbs.
|
Dimension: L x W x H | 48" x 48" x 80" |
Machine Location:
|
City: |
On Request
|
State: |
New York
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- BURGMASTER Six Spindle Turret Drilling and Tapping Machine, Model2DCP
Drilling capacity, mild steel 3/4" Tapping capacity, mild steel 3/4" N.F. Turret travel 8" Table size 24" x 40" Throat depth 11-1/2" (12) Preselective spindle speeds, three ranges 225-3,000 R.P.M. Carriage travel 15" Work height, spindle nose to table, head up 9" carriage down Work height, spindle nose to table, head up 24" carriage up Feed, infinitely variable and preselective for each 1-45 I.P.M. spindle Rapid traverse, pre-selective in length for each 195 I.P.M. spindle Depth control, pre-selective in length for each plus or minus .002" spindle
EQUIPPED WITH: Electric feed system: Manual by fast or or slow Jog Control, Semi-Automatic, orFully Automatic Spindle Cycle Selector: allows complete automatic cycling. Each of the six spindles can be programmed individually by the flick of the assigned thumbwheel. Rapid approach points are adjustable through a cam setting. Automatic retraction at the end of the machining operation (drilling, reaming, dwell for counterboring, and boring). The turret then indexes bringing the tool into the new position. The slide rapid traverses down to the new feed engagement point andthe new preselected machining operation occurs. Spindle Function Selector is also programmed by thumbwheel. It provides the Cycle Stop mode-that is, stopping the automatic cycle operation on a given spindle at the conclusion of the spindle's preassigned cycle and also preselects the motor speed. Key lock selector switch for Indexer Auto Enable Rheastat for Reciprocating Feed (peck drill) (6) 1/32"-1/2" Capacity ALBRECHT keyless drill chucks External coolant pump and tank 2-1 H.P. 3/60/220-440 volt two-speed drive motor coupled to a two step belt drive and electrical controls
|
Electrical Description |
- Machine is wired for 440 volt operation.
|
|