Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11269 | Knee Mills (Bridgeport Type) |
|
Gorton |
Model 1-22 |
Very Good |
sold |
Photo /
More Info. |
2 HP Variable Speed 12" x 48" Table: 2HP Variable Speed
Vertical Milling Machine
12” x 48” Table,
Power Spindle Down Feed |
|
Ad # 7094 | Knee Mills (Bridgeport Type) |
80's |
J & L |
HY-1 |
Good |
Sold |
Photo /
More Info. |
Manual knee mill 9" x 42" w/ DRO: VS Head Type
2-axis DRO
9" x 42" Table
Quill scale DRO-Mitz.
Made in Tiawan
3 HP |
|
Ad # 11163 | Knee Mills (Bridgeport Type) |
1999 |
Acer |
3VK |
Very Good |
Sold |
Photo /
More Info. |
Acer 10 x 50 knee mill: 1999 Acer 3VK 10" x 50" table
2 axis DRO-Mits
variable speed head
R-8 spindle
includes full collet set and rack
3HP
Very Nice clean Quality Mill
Ways are almost perfect!! |
|
Ad # 13017 | Knee Mills (Bridgeport Type) |
N/A |
Gorton |
9-J |
Fair |
sold |
Photo /
More Info. |
Table Size: 45" Wide x 10" Deep: Gorton Horizonal Mill
Table Size: 45" x 10"
Throat Depth: 18"
RPM: 500-4000
3 HP Motor RPM 1725
Power Feed |
|
Ad # 8806 | Knee Mills (Bridgeport Type) |
80's ? |
Do-All |
9 x 50 |
Good |
SOLD |
Photo /
More Info. |
9 x 50 table: 9 x 50 table
Variable speed head
digital readout
Power feed on X
3 HP
|
|
Ad # 2853 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
Series 2 Special |
Good |
sold |
Photo /
More Info. |
Large Bridgeport Manual Mill: 58 x 11" table size
2 HP
R-8 spindle
Variable Speed Head
|
|
Ad # 9649 | Knee Mills (Bridgeport Type) |
98 |
ACER |
EVS-3VK |
Very Good |
sold |
Photo /
More Info. |
10 x 50 table : R-8 spindle
vise
2-axis readout
10x50 table
variable speed-EVS inverter drive
machine almost like new
digital quill scale
power feed
dovetale ways
3hp.
will go 220-3ph or single phase |
|
Ad # 5557 | Knee Mills (Bridgeport Type) |
1984 |
Sharp |
# 1 |
Very Good |
Sold |
Photo /
More Info. |
9" x 42" Sharp Model 1 Knee Mill : Table: 9 " x 42 " |
|
Ad # 8607 | Knee Mills (Bridgeport Type) |
80's-90' |
Bridgeport |
series 1 |
Good |
Sold |
Photo /
More Info. |
bridgeport: 2 axis readout
9 x 48 table
power feed on x, needs a new gear inside..
2 hp
does not include vise |
|
Ad # 7699 | Knee Mills (Bridgeport Type) |
|
Clausing Kondia |
FV-1 |
Very Good |
Sold |
Photo /
More Info. |
9" x 49" Clausing Kondia Mill with DRO and Power Feed in X: Table: 9" x 49"
2-Axis Accu-Rit MillMate DRO's
Spindle Power: 3 hp
Variable Speed Head
Spindle Speeds: 60 - 500, 500 - 4,000 rpm
Power Feed in "X" Axis
Mister System
Hardened Slide Ways |
|
Ad # 15377 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
Table Size: 9" x 42": Bridgeport Knee Mill
step pulley head
Capacity: 9" x 42" table
Electrical: 230/3 phase
X and Y axis power feed |
|
Ad # 16008 | Knee Mills (Bridgeport Type) |
|
Alliant |
48 x 9 |
Good |
sold |
Photo /
More Info. |
48" x 9" Table: Variable Speed Spindle
Mitutoya Linear Scale Counter DRO's in "X" and
"Y" |
|
Ad # 14284 | Knee Mills (Bridgeport Type) |
|
Acra |
AM-3VAC |
Good |
sold |
Photo /
More Info. |
54" x 10" table: Acra Milling Machine
Model: AM-3VAC
Capacity: 54" x 10"
Electrical: 230/3 phase
SPECIFICATIONS:
- x-axis: 39.5"
- y-axis: 16.5"
- z-axis (knee): 16"
- quill travel: 5"
- spindle speeds: 50 - 5000 rpm
- spindle motor: 3 hp
Anilam DRO
Manual included
Has its own 3 phase converter |
|
Ad # 9009 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Excellent |
Sold |
Photo /
More Info. |
9 X 42": 2 HP BRIDGEPORT MILL IN EXCELLENT SHAPE WITH TOOLING |
|
Ad # 14854 | Knee Mills (Bridgeport Type) |
2004 |
Birmingham |
BPV-3942 |
Excellent |
Sold |
Photo /
More Info. |
9 x 42 table: Birmingham # BPV-3942 Manual Mill
table:9 x 42"
2 axis DRO
power x feed
speeds: 45-4500RPM
work light
spindle: 3 HP: R-8 collet
step pully head
Note: very nice mill ,little use: vice not included
|
|
Ad # 12740 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
J series Head |
|
sold |
Photo /
More Info. |
9" x 32": Bridgeport Series 1
J Series head-step pulley
9" x 32" Table
Grizzly Industrial DRO
Great For the home Shop!! |
|
Ad # 10596 | Knee Mills (Bridgeport Type) |
1982 |
Bridgeport/Textron |
Series 1 |
Good |
Sold |
Photo /
More Info. |
: Bridgeport/Textron Series 1 Vertical Milling Machine
2 hp Variable Speed 230/460 3ph
S/N: BR229086
Comes with the SWI TRAK 103 3 axis DRO
4” Riser
R8 Collets and holder
Work light
RANGE
Table travel (X-Axis):
36" (914 mm)
Saddle Travel (Y-Axis):
12" (305 mm)
Quill Travel:
5" (127 mm)
Knee Travel (Z-Axis):
16" (406 mm)
Ram Travel:
12" (305 mm)
Throat Distance (Min.):
18.75" (476 mm)
Throat Distance (Max.):
6.75" (171 mm)
WORKTABLE
Standard:
42 x 9"
T Slot center distance:
3 @ 2.5" (64 mm) centers
T-Slot Size:
0.625" (16 mm)
Height Above Floor (Max.):
47.25" (1200 mm)
Weight of Workpiece (Max.):
750 lb (340 kg)
Spindle (2J Head)
Power Rating 30 min. Duty Cycle:
3 hp (2.2 kW)
Power Rating Continuous:
2 hp (1.5 kW)
Tooling:
R-8 Collets
Drilling Capacity
Power Quill Feed 3:
3/4" Dia. (19 mm)
Manual Drilling Capacity:
3/4" (19 mm) Mild Steel
Boring Range:
6" (152 mm) Mild Steel
Spindle Diameter:
1.875 in (48 mm)
Quill Diameter:
3.375" (86 mm)
Speed Range
High (Infinitely Variable):
500-4200 rpm
Low:
60 - 500 rpm
Power Quill Feed:
0.0015"/rev (0.038 mm)
Manual Adjust:
0.003"/rev (0.076 mm)
0.006"/rev (0.152 mm)
MACHINE SIZE
Floor Space:
8.3 x 5.3 ft (2.53 x 1.6 m)
Machine height:
7.04 ft (2.15 m)
Mass of Machine:
1950 lb (885 kg)
2095 lb (950 kg) (Shipping)
|
|
Ad # 9714 | Knee Mills (Bridgeport Type) |
85 |
Webb |
3v8h champ |
Good |
sold |
Photo /
More Info. |
28x42x12: futaba 2axis readout 2/10ths
servo power feed
spi angle loc vise
60-4200 rpms |
|
Ad # 6957 | Knee Mills (Bridgeport Type) |
1987 |
BRIDGEPORT |
SERIES I |
Very Good |
sold |
Photo /
More Info. |
2 HP BRIDGEPORT SERIES I VERTICAL MILL: 2 HP BRIDGEPORT SERIES I VERTICAL MILL
SURFACE AREA OF WORK TABLE ---------------- 9" X 48"
TABLE TRAVEL ------------ ( X AXIS ) ------ 36" LONGITUDINAL
SADDLE TRAVEL ----------- ( Y AXIS ) ------ 12" CROSS
SPINDLE QUILL TRAVEL ---- ( Z AXIS ) ------ 5" VERTICAL
KNEE TRAVEL ------------------------------- 16" VERTICAL
SPINDLE QUILL SPEEDS ---- ( VARI-SPEED ) -- TO 4200 RPM
SPINDLE QUILL INTERNAL TAPER -------------- R-8
HEAD TILT FRONT TO BACK ------------------- +/- 45 DEG.
HEAD TILT SIDE TO SIDE -------------------- +/- 90 DEG.
MAIN DRIVE MOTOR -------------------------- 2 HP
EQUIPPED WITH ---
ONE SHOT MACHINE LUBRICATION SYSTEM |
|
Ad # 7174 | Knee Mills (Bridgeport Type) |
|
Wells Index |
837 |
Very Good |
Sold |
Photo /
More Info. |
10" x 42" Knee Mill with DRO and Power Feeds : Table: 10" x 42"
Motor: 3 hp
Variable Speeds
Power Feed in X
Heidenhain Digital Readouts (2 Axis)
Set of Collets included
NOTE:
Purchaser can choose between one of the following:
7-1/2" Vise OR a 6" Vise
AND Either:
A Indexing Table
OR
A 90 deg Head |
|
Ad # 4399 | Knee Mills (Bridgeport Type) |
1992 |
Supermax |
YC-1-VA-T |
Good |
Sold |
Photo /
More Info. |
Quality Knee Mill 9" x 42 table: 9" x 42" table
2-axis acu-rite readout
R-8 spindle
variable speed head 60-4200rpm,runs quiet
3HP |
|
Ad # 13437 | Knee Mills (Bridgeport Type) |
?? |
Bridgeport |
|
Needs Work |
sold |
Photo /
More Info. |
Bridgeport vertical mill milling machine J head: Bridgeport vertical mill for sale.
1 hp
32" table
r8 collets
230 3 phase.
Hooked up and can see work. It needs a handle for
the slow quill feed, and cam ring and pins for the
high speed to work. It's been rigged to stay in
low at the moment. It was bought just for hobby
work. I have some tooling and collets that go with
the machine. |
|
Ad # 9138 | Knee Mills (Bridgeport Type) |
|
Cincinnati |
Toolmaster |
Good |
Sold |
Photo /
More Info. |
: step pulley head
table size: ?, table travel 20" x 10"
Spindle: QC #30 |
|
Ad # 6955 | Knee Mills (Bridgeport Type) |
1983 |
BRIDGEPORT |
SERIES I |
Good |
Sold |
Photo /
More Info. |
BRIDGEPORT SERIES I VERTICAL MILL: BRIDGEPORT SERIES I VERTICAL MILL
TABLE WORKING SURFACE ----------- 9" X 42"
T-SLOTS -------------( 3 )------- 5/8" ON 2-1/2" CENTERS
TABLE LONGITUDINAL TRAVEL( X AXIS ) -- 30"
SADDLE TRAVEL -------- ( Y AXIS ) ---- 12"
QUILL TRAVEL ------------------------- 5"
QUILL FEEDS ---------- ( 3 ) --------- .0015 TO .006 IPR
KNEE TRAVEL ---------- ( Z AXIS ) ---- 16"
RAM TRAVEL --------------------------- 12"
DISTANCE SPINDLE C/L TO COLUMN ------- 6-3/4" MIN., 18-3/4" MAX.
TABLE CAPACITY WITH WORKPIECE CENTERED - 750 LBS. MAX.
MAIN DRIVE MOTOR --------------------- 2 HP
SPINDLE SPEEDS INFINITELY VARIABLE --- 60 TO 4200 RPM
SPINDLE TAPER ------------------------ R-8
COLLET CAACITY ----------------------- 3/4"
DRILLING CAPACITY ----- ( MILD STEEL ) 3/4" MANUAL FEED
DRILLING CAPACITY ----- ( MILD STEEL ) 3/8" POWER FEED
MILLING CAPACITY ------ ( MILD STEEL ) 2 CU. IN./MIN.
BORING CAPACITY ------- ( MILD STEEL ) 1-7/8" DIA.
RAM ------------------------------ DOVETAIL TYPE
MILLING HEAD MOVEMENTS, L-R OR R-L ---- 360 DEG.
MILLING HEAD MOVEMENTS, IN AND OUT ---- 45 DEG.
EQUIPPED WITH ---
SONY 2 AXIS DIGITAL READOUT
CHROME WAYS
BIJUR ONE SHOT CENTRAL LUBRICATION SYSTEM
DRAW BAR & COLLET
POWER LONGITUDINAL FEED TO TABLE |
|
Ad # 11750 | Knee Mills (Bridgeport Type) |
|
OKK |
MH-3V |
Good |
sold |
Photo /
More Info. |
14" x 65": OKK MH-3V
14" x 65" Table
Travels X 36" Y 16" z 15"
Speeds 48-1600
Feeds 1/2 - 86 IPM
50 Taper Spindel
|
|
Ad # 12213 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Good |
sold |
Photo /
More Info. |
9" x 42": Bridgeport 9" x 42" Table
80-2750 RPM
220/3 Phase |
|
Ad # 15311 | Knee Mills (Bridgeport Type) |
1987 |
Seiki |
3VH |
Good |
sold |
Photo /
More Info. |
9" x 49": Seiki XL knee mill
table:9" x 49"
vari speed head
Note: power feed on longitudinal broken
3HP motor-220/440/3 voltage
50-4500RPM
notes:ways look very good |
|
Ad # 9016 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
9 x42 |
Very Good |
Sold |
Photo /
More Info. |
42" TABLE: 1-1/2 HP BRIDGEPORT
VARI- SPEED
DRO
INEXCELLENT SHAPE |
|
Ad # 13805 | Knee Mills (Bridgeport Type) |
? |
Gorton |
Mastermill |
Good |
sold |
Photo /
More Info. |
Table Size 48" x 12": Gorton Mastermill
Capacity: 48" x 12" table
Electrical: 220/ 3 phase
2.5 HP
Power Knee
|
|
Ad # 9714 | Knee Mills (Bridgeport Type) |
85 |
Webb |
3v8h champ |
Good |
sold |
Photo /
More Info. |
28x42x12: futaba 2axis readout 2/10ths
servo power feed
spi angle loc vise
60-4200 rpms |
|
Ad # 5318 | Knee Mills (Bridgeport Type) |
171500 |
Bridgeport |
J series |
Good |
sold |
Photo /
More Info. |
Used Bridgeport Mill: Variable speed head
9" x 42" table
Power feed
Digital readout |
|
Ad # 9512 | Knee Mills (Bridgeport Type) |
1996 |
Atrump |
K2V |
Excellent |
sold |
Photo /
More Info. |
single phase machine: 3 HP.
One shot lube.
49" x 9" table.
30.75"0 crosstravel.
Power feed crosstravel.
6" import vise.
Phase converter.single phase
Collets, toolbox as pictured.
Sony 2 axis Digital Readout. |
|
Ad # 7773 | Knee Mills (Bridgeport Type) |
1995 |
Enco |
100-1529 |
Very Good |
sold |
Photo /
More Info. |
9" x 42" Enco Model 100-1529 Bridgeport Type Knee Mill: 9" x 42" Table
Longitudinal Travel 30"
Cross Travel 13.5"
Knee Travel 16"
Quill Travel 5"
x-Axis Power Feed
Kurt Vise
2-Axis DRO
Spindle Speeds 70-4200 RPM
Variable Speed
2 HP |
|
Ad # 10275 | Knee Mills (Bridgeport Type) |
93? |
Alliant |
RT2 |
Good |
Sold |
Photo /
More Info. |
9 x 48 table: 9 x 48 tablevs head
R-8 spindle
12" riser block in column
digital readout
pwr feed on longitudinal 3 hp
|
|
Ad # 9349 | Knee Mills (Bridgeport Type) |
1997 |
Bridgeport |
9 x 48 |
Very Good |
Sold |
Photo /
More Info. |
9 x 48 table: 9 x 48 table
was a cnc style but control removed,New lead screws were recently installed -very tight machine
R-8 spindle
work light
Air power draw bar
coolant sys
chip pan
VS head
3 HP
DRO-added not shown-3 axis
lube
vise included
4500RPM max
|
|
Ad # 9817 | Knee Mills (Bridgeport Type) |
1982 |
bridgeport |
serie 1 |
Very Good |
Sold |
Photo /
More Info. |
42" : 42" table recondition head in excellent shape |
|
Ad # 14251 | Knee Mills (Bridgeport Type) |
|
Yuasa |
TX - 2000 |
Good |
sold |
Photo /
More Info. |
9" x 42" Table: Yuasa Vertical Milling Machine
Model: TX - 2000
Capacity: 9" x 42" table
Electrical: 230/3 phase |
|
Ad # 11442 | Knee Mills (Bridgeport Type) |
1997 |
Acer |
Ultima 3VK |
Very Good |
sold |
Photo /
More Info. |
: 1997 Acer Knee Mill
INDUSTRIAL MODEL
3 HP MOTOR 3 PHASE 220-440 VOLT,
HEAD HAS JUST BEEN REBUILT,
MOTOR HAS NEW BOTTOM BEARING,
NEW DRIVE BELT,
VARIABLE SPEED 70-500 RPMS LOW SPEEDS--600-4000
RPMS HIGH SPEEDS,
3 DOWN FEED RATES,
POWER FEED ON TABLE X AND Y,
42" X 9" TABLE,
TAKES R-8 TOOLING,
15" QUILL TO TABLE,
COMES WITH ONBOARD OILER,
2400 LBS,
MOTOR IS NOT ON SO THAT IT WOULD FIT UNDER MY
GARAGE DOOR,
MILL WORKS GREAT AND HAS BEEN VERY WELL
MAINTAINED
Comes with Manuals for Mill and DRO also has
calibration certs from Mitutoyo for DRO and
scales
|
|
Ad # 6888 | Knee Mills (Bridgeport Type) |
|
Hurco |
SM-1 |
Good |
sold |
Photo /
More Info. |
Vertical Knee Mill Hurco Model SM-1 w/ 2 axis DRO Pathfinder-50 8781-2: Teledyne Gurley Pathfinder-50 2 Axis DRO Model 8781-2
Table Size..............12" x 42"
Travels.................24" X-axis
.................13.75" Y-axis
.................4.75" Z-axis
Spndle Drive Motor......3HP
Spindle Speeds(2).......Low 60-500RPM
.......High 500-4,000RPM
Table Load Capacity.....660 lbs. |
|
Ad # 12214 | Knee Mills (Bridgeport Type) |
|
Brideport |
|
Good |
sold |
Photo /
More Info. |
9" x 42" Table: Bridgeport
9" x 42" Table
r-8 spindle
Bridgeport Powerfeed |
|
Ad # 11402 | Knee Mills (Bridgeport Type) |
1982 |
Yeougchin Machinery |
Super Max YC 1 1/2 vs |
Good |
sold |
Photo /
More Info. |
9" x 48" Table 60-4200 RPM: Super Max
Variable Speed 60-4200 RPM
9" x 48" Table
|
|
Ad # 15732 | Knee Mills (Bridgeport Type) |
|
Lagun |
FTV-2 |
Good |
sold |
Photo /
More Info. |
10 x 50 table: Lagun FTV2 knee mill
includes 2 axis dro,work light,manual lube and vise
Lagun FTV2 knee mill std specs below-please verify actual machines..
pecificationDescription
Table Dimensions50" x 10"
Travels:
Longitudinal33"
Cross16"
Knee16"
Quill5"
Ram22-3/16"
Spindle Speeds (Variable)55 - 4,250 RPM
Spindle TaperR-8
Spindle Quill Feeds0.006" - 0.003" - 0.0015"
Dimensions:70" x 65" x 85"
Approx. Weight2,850 lbs
|
|
Ad # 14538 | Knee Mills (Bridgeport Type) |
1992? |
Mighty Comet |
3KVHD |
Good |
sold |
Photo /
More Info. |
10 x 50 table: Comet Heavy duty knee mill
3HP
vari speed 50-4500rpm
work light
R-8 spindle taper
Digital quill scale-dro
power feed on X axis
2 axis DRO on x& y travels-sargon
no vise or tooling included
220/440/3 voltage motor
Notes: box way (heavy duty) quality built mill |
|
Ad # 11940 | Knee Mills (Bridgeport Type) |
1987 |
Supermax |
YCM 16VS |
Good |
sold |
Photo /
More Info. |
Table, 9" x 42": Supermax Knee Mill
Model #YCM 16VS
Mfg date 1987
3 HP motor
Spindle speed, 60- 4200 rpm
Anilam Wizard digital readout |
|
Ad # 13699 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
57031 |
Good |
sold |
Photo /
More Info. |
Table size 9" x 42": Bridgeport Knee Mill
step pulley head for speed change
Model: 57031
Table size: 9" x 42"
Throat: 19"
220/ 3 phase
Sony DRO |
|
Ad # 12613 | Knee Mills (Bridgeport Type) |
1961 |
Bridgeport |
|
Good |
Sold |
Photo /
More Info. |
: |
|
Ad # 12408 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
series 1 |
Fair |
sold |
Photo /
More Info. |
9" x 42": Bridgeport
Series 1
9" x 42" Table
J series head
Powerfeed X
80-2720RPM
|
|
Ad # 5316 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
Series 1 |
Good |
Sold |
Photo /
More Info. |
Bridgeport Mill W/ readout /power feed: Variable speed head
9 x 42" table
Power feed |
|
Ad # 12915 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
9 x 32 |
Good |
sold |
Photo /
More Info. |
9 x 32" table 110/1 phase: Bridgeport Knee Mill
9 x 32" table
2M collet spindle-8 pcs included
110/1 single phase
step pulley head
ways look good |
|
Ad # 8196 | Knee Mills (Bridgeport Type) |
|
ExCello |
9 x 46 |
Good |
Sold |
Photo /
More Info. |
9" x 46" ExCello Knee Mill: Table: 9" x 46"
Spindle Power: 2 hp
30 taper spindle
Spindle Speeds" 120 - 3,800 rpm Variable Speed Drive
Work Light
|
|
Ad # 11677 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
True Trace 2 |
Very Good |
sold |
Photo /
More Info. |
9" x 42" Bridgeport tracer mill: Bridgeport True Trace
9" x 42" Table
Milling Head # J-60351
True Trace #s 1053-01
1573 |
|
Ad # 5839 | Knee Mills (Bridgeport Type) |
2000 |
Victor |
JF-2VS |
Good |
Sold |
Photo /
More Info. |
9" x 49" Victor Universal Vertical Ram Style Turret Mill: Table Size 9" x 49"
Table Travels:
X-Axis: 35"
Y-Axis: 12"
Vertical Travel (Knee) 16"
Quill Travel 5"
Spindle Speeds 60 to 4200 RPM, Variable Head
Spindle Taper R8
Spindle Motor 3 H.P., 220 Volt 3 Phase
Equipped With:
Hardened & Ground Table
Way Covers
Work Light
One Shot Lube
|
|
Ad # 10266 | Knee Mills (Bridgeport Type) |
80's? |
Bridgeport |
Series 2 |
Good |
sold |
Photo /
More Info. |
series 2 bridgeport:11 x 58 table: table: 11 x 58"
missing quill handle and knee lift handles
bridgeport power feed on longitudinal
SPECIFICATIONS:std specs please verify below
WORKING SURFACE OF TABLE ................. 11" X
58"
RANGE:
- LONGITUDINAL ........................... 30"
- CROSS .................................. 15"
VERTICAL (KNEE) .......................... 16"
RAM TRAVEL ............................... 16"
MAXIMUM THROAT DISTANCE .................. 26-5/8"
MINIMUM THROAT DISTANCE .................. 10-5/8"
MAXIMUM TABLE LOAD CAPACITY .............. 1,500
LBS.
SPINDLE SPEEDS, TWO RANGES ............... 50 TO
450 RPM
INFINITELY VARIABLE ...................... 450 TO
3500 RPM
QUILL TRAVEL ............................. 5"
QUILL POWER FEED RANGE ................... .6 TO
2.5 IPM
FEEDS:
- LONGITUDINAL ........................... 3/8 TO
24 IPM
- CROSS .................................. 3/16 TO
12 IPM
RAPID TRAVERSE RATE:
- LONGITUDINAL AND CROSS ................. 24 IPM
- VERTICAL (KNEE) ........................ 12 IPM
TAPER IN SPINDLE ......................... R-8
HEAD TILTS:
- LEFT TO RIGHT .......................... 90 DEG.
- FRONT TO BACK .......................... 30 DEG.
RAM SWIVELS .............................. 360
DEG.
APPROXIMATE WEIGHT ....................... 5,500
LBS.
very little wear on the ways
no knee crank handle or quill handle
Std. power feed unit may need a little TLC..or
replaced with a modern unit |
|
Ad # 10728 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Fair |
SOLD |
Photo /
More Info. |
: Bridgeport vertical milling machine w/ DRO
Power Feed and varible speed head
|
|
Ad # 10375 | Knee Mills (Bridgeport Type) |
?? |
KERNEY &TRECKER/Milwalkee |
K330/#3 |
Good |
sold |
Photo /
More Info. |
Table size : 64" x 15"-1/2 x 10": 30HP: Table size 64"x 15-1/2"
Z travel appox: 10"
travel table: 36" ? verify
spindle taper: 50
coolant pump
Power down feed on head
with with 12" vice.
50 to 1250 spindle rpm
30HP |
|
Ad # 12231 | Knee Mills (Bridgeport Type) |
|
Summit |
11" x 52" |
Good |
sold |
Photo /
More Info. |
11" x 52" table: Summit
11" x 52" table
50-3650 RPM
Voltage 440
50 Taper
Fagor DRO
Power X and Y |
|
Ad # 12257 | Knee Mills (Bridgeport Type) |
1980 |
Bridgport |
Series II |
Good |
Sold |
Photo /
More Info. |
9x42 : 2 HP head sounds good.
Has broaching attachment.
Table feed not working. May just be a fuse.
vise included
head is a little noisy-no big issue- |
|
Ad # 15384 | Knee Mills (Bridgeport Type) |
? |
Bridgeport |
? |
Good |
sold |
Photo /
More Info. |
9" x 48": Bridgeport Knee Mill
Capacity: Table 9"x 48"
Electrical: 230/3 phase
X and Y axis power feed
|
|
Ad # 9715 | Knee Mills (Bridgeport Type) |
67 |
bridgeport |
5f180f |
Good |
sold |
Photo /
More Info. |
9x32: 80-2720 rpm
1-1/2 hp
step pulley drive
powerfeed-{superpower]
anilem readout
r-8 holder
coolant pump
angleloc vise w/ swivel vise |
|
Ad # 1052 | Knee Mills (Bridgeport Type) |
80's? |
BRIDGEPORT |
88A018 |
Fair |
Sold |
Photo /
More Info. |
BRIDGEPORT MILLING MACHINE: STEP PULLEY HEAD TYPE
9 X 42" TABLE |
|
Ad # 5838 | Knee Mills (Bridgeport Type) |
1966 |
Bridgeport |
Series J |
Good |
Sold |
Photo /
More Info. |
9" x 42" Bridgeport Series J With Power Downfeed: Table Size 9" x 42"
Table Travels:
X-Axis: 30"
Y-Axis: 12"
Vertical Travel (Knee) 16"
Quill Travel 5"
Spindle Feed 0.0015, 0.003" & 0.006" /REV
Spindle Speeds 80 to 2720 Step Pully Head
Spindle Taper R8
Spindle Motor 1 H.P., 208/230/460 Volt 3 Phase
Equipped With:
Bridgeport Vise
New Brass Table Nuts
Power Down Feed |
|
Ad # 4426 | Knee Mills (Bridgeport Type) |
|
Ex-Cell-O |
|
Good |
sold |
Photo /
More Info. |
9" x 42" Ex-Cell-O Knee Mill: Table: 9" x 42"
Variable Speed
Power Feed in X |
|
Ad # 12257 | Knee Mills (Bridgeport Type) |
1980 |
Bridgport |
Series II |
Good |
Sold |
Photo /
More Info. |
9x42 : 2 HP head sounds good.
Has broaching attachment.
Table feed not working. May just be a fuse.
vise included
head is a little noisy-no big issue- |
|
Ad # 12278 | Knee Mills (Bridgeport Type) |
|
Lagun |
FTV-2 |
Good |
sold |
Photo /
More Info. |
9" x 49" Table: Lagun FTV-2
9" x 49" Table
Voltage 220/3 Phase
DRO Anilam Wizard
Power Feed on the X
TABLE SIZE: 9” x 48”
T-SLOTS, 3 ON 2 1/2” CENTERS
T-SLOT SIZE 5/8”
MAXIMUM WEIGHT ON TABLE 750 LBS.
TRAVELS
TABLE TRAVEL X-AXIS, MANUAL/ WITH POWER FEED 33”
/ 30”
CROSS TRAVEL, Y AXIS 16”
KNEE TRAVEL, Z AXIS 16”
RAM TRAVEL 22 3/16”
HEAD
MAIN MOTOR: 3 HP
INFINITE VARIABLE SPEED 55 TO 4250 RPM
HEAD SWIVEL +/- 90 DEGREES
HEAD TILT +/- 45 DEGREES
DISTANCE, SPINDLE TO COLUMN 5 TO 27”
DISTANCE, SPINDLE TO TABLE 0 TO 18”
QUILL
POWER QUILL FEEDS TO QUILL/REV. .0015, .003, .006
INCH/REV
SPINDLE TAPER R-8
QUILL DIAMETER 3 3/8”
QUILL TRAVEL 5”
MACHINE CONSTRUCTIVE DIMENSIONS
COLUMN TURRET DIAMETER (GRADUATED) 15”
KNEE WIDTH 11 ½“
KNEE TO COLUMN BEARING LENGTH 18”
SADDLE & TABLE BEARING LENGTH 20”
RAM & TURRET BEARING LENGTH 19”
RAM TOTAL 36”
WEIGHT 2,850 LBS.
HEIGHT 104”
WIDTH 67”
DEPTH 63”
POWER, DUAL VOLTAGE MOTORS 230/440 VOLTS
|
|
Ad # 7852 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
2-J |
Good |
sold |
Photo /
More Info. |
9" x 42" Bridgeport w. Powerfeed in X and 2-Axis DRO: Table: 9" x 42"
Variable Speed Head
Spindle Power: 1.5 hp
Spindle Speeds: 500 - 4,200 rpm
Powerfeed in "X"
2-Axis SWI TRAK 102 DRO
One Shot Lube |
|
Ad # 2791 | Knee Mills (Bridgeport Type) |
1970? |
Bridgeport |
6690 |
Needs Work |
Sold |
Photo /
More Info. |
Bridgeport Manual Vertical Mill: 9 x 36 table
Step pulley head
Servo Power Feed
1.5 hp |
|
Ad # 7103 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
9" x 42" Knee Mill |
Good |
sold |
Photo /
More Info. |
9" x 42" Bridgeport Knee Mill With 2-Axis DRO and Power Feed: Table: 9" x 42"
6" Riser Block
Variable Speed Head
Spindle Speeds: 60 - 4,200 rpm
Spindle Power: 1.5 hp
Sony 2-Axis DRO (Type LU10A-1G5
Power Feed in "X"
Mistic Mist coolant mister System
Collet Set |
|
Ad # 7233 | Knee Mills (Bridgeport Type) |
1968 |
CINCINNATI |
#415-16 |
Very Good |
Sold |
Photo /
More Info. |
#415-16 CINCINNATI Dial Type Vertical Mill: #415-16 CINCINNATI Dial Type Vertical Mill
Table working surface: 16 1/4" x 79 3/4"
Range: longitudinal: 42"
cross: 16"
vertical (knee): 16"
vertical (head): 6"
Max.distance, spindle nose to table: 22 1/8"
Taper in spindle No.50 Std.
24 Spindle speeds: 16-1600 RPM
32 longitudinal + cross feeds: 3/8 to 90 IPM
32 vertical feeds (knee): 3/16" to 45 IPM
Rapid traverse rate: longitudinal+cross: 150 IPM
vertical (knee): 75 IPM
EQUIPPED WITH:
Power rapid traverse
3 H.P. individual feed motor
Power feed and rapid traverse to vertical head
Turret stop, 4-position with dial indicator
Automatic backlash eliminator
Coolant system
Mist coolant system
Manual draw bar
(1) toolholder w/cutter
Hardened knee ways
15 HP 3/60/230-460 Volt main drive motor and controls |
|
Ad # 7520 | Knee Mills (Bridgeport Type) |
91?? |
Bridgeport |
Series 1 |
Good |
Sold |
Photo /
More Info. |
9 x 42" table Series 1 ;variable speed : variable speed head
Series 1
2 hp
bridgeport power feed on X
R-8 spindle
manual lube
|
|
Ad # 14289 | Knee Mills (Bridgeport Type) |
1980's |
Millport |
2S |
Fair |
sold |
Photo /
More Info. |
42" x 9" Table: Millport Milling Machine
Model: 2S
Capacity: 42" x 9" Table
Electrical: 230/ 3 phase
Servo Power Feed
R-8 Spindle
• Step Pulley; 16 Speeds: 80 - 5440 RPM's
• 9in. x 42in. Table
• 3 Spindle Down Feeds: .015; .003; .006
• Quill Travel 5in.
• Mill Vise 6in.
• R-8 Collets
|
|
Ad # 2368 | Knee Mills (Bridgeport Type) |
|
Cincinnati |
2MI |
Fair |
Sold |
Photo /
More Info. |
Vertical Knee Mill: Table size: X = 53 Y = 10
50 Taper spindle |
|
Ad # 5719 | Knee Mills (Bridgeport Type) |
|
Clausing Kondia |
FV-1 |
Fair |
SOLD |
Photo /
More Info. |
9" x 49" TOP WELL with DRO and Power Feed in X: Table: 9" x 49"
Variable Speed Spindle: 60 - 4,000 rpm
Spindle Power: 3 hp (2.2 kW)
2 Axis Pathfinder DRO
Power Feed in X |
|
Ad # 14261 | Knee Mills (Bridgeport Type) |
|
Well-Setting |
942 |
Good |
sold |
Photo /
More Info. |
9" x 49" Table: Well-Setting Manual Mill
Model: 942
Capacity: 9" x 49" Table
Electrical: 230/3Phase
Table Longitudinal Travel (X-Axis).. 36"
Saddle Cross Travel (Y-Axis). 12"
Knee Vertical Travel (Z-Axis).. 16"
Ram Travel.. 12"
Quill Travel..5"
Spindle Taper..#R8
power feed on X
Mitutoyo DRO |
|
Ad # 9479 | Knee Mills (Bridgeport Type) |
1961/58 |
Bridgeport |
9 x 42 step pully |
Fair |
SOLD |
Photo /
More Info. |
9 x 42 , J-2 step pully head: 9 x 42 table
J-2 step pully heads
power feed X
vise
R-8 spindle
rapid return motor/pulley on X
|
|
Ad # 12082 | Knee Mills (Bridgeport Type) |
1987 |
Alliant |
42S |
Good |
sold |
Photo /
More Info. |
9" x 42": Table Size: 9" x 42" with (3) T-Slots
Longitudinal Travel, Manual (X Axis): 28"
Saddle Cross Travel (Y Axis): 12"
Vertical Knee Travel (Z Axis): 16"
Quill Travel: 5"
Quill Power Feeds: .0015, .003", 006" Per
Revolution
Ram Travel: 12"
Ram Turret Rotation: 360 Degrees
Spindle Taper: R8
Variable Spindle Speeds: 60 to 4500 RPM |
|