Year:
| 93
|
Make:
| Poreba
|
Model:
| TPK 90A-1/3M
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 19,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 36" swing over ways
132" centers 24" 6 jaw chuck tool post 2-steady rests 2-speeds on tale stock
inch/metric threads power rapid travers 36" swing 28" swing over cross slide 4.5" thru hole std specs below-please verify Capabilities Swing over bed 36 1/2" Swing over gap 49" Swing over cross slide 25" Distance between centers ~ 118" or maybe 120" Headstock 21 spindle speeds 9, 11, 14, 18, 22, 28, 35 1/2, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900 Workpiece weight between centers 13,500 lbs. Workpiece weight with 2 steady rest 20,000 lbs Hole through spindle 3 3/4" American standard direct mount spindle nose A1-11 Chuck 24" Buck 6 jaw chuck Feeds and threads Longitudinal (70) ..0043 - .500 IPM Cross feed range (70) .0021 - ..250 IPM Top slide feed range (70) .001 to .125 IPM Metric threads range 1 - 120 mm/rev. Inch threads range 1/4 - 30 TPI Carriage and apron Cross slide travel 18 1/2" Top slide travel 11 3/4" Carriage length bearing bedways 33 3/4" Carriage bridge width 16 1/2" Rapid travels Carriage 260 IPM Cross slide 130 IPM Top slide 65 IPM Six way power feeds/spindle locked standard Reverse feed direction no spindle direction change standard Carriage rear mount chip and coolant splash guard standard Tailstock Quill diameter 5 1/8" with tang slot Quill travel 11 3/4" Quill taper No. 6 MT Two speed quill travel 1:1 and 1:5 ratio Miscellaneous Main drive motor 2 speed AC 23 and 36 HP Width of bed x depth 23" x 17 3/4" Length = between centers + 8 feet Width 7 feet Net weight 19,400 lbs Electrical U.L approved 460 volt 3 phase 60 Hz Standard equipment included Coolant system Automatic headstock lubrication 8T slotted top slide Six way power rapid traverse Chuck splash guards Spindle positive lock at 5 degree increments Longitudinal and cross slide limit switches Ammeter Optional equipment included with it Steady rest 1 37/64" - 15 3/4" roller Steady rest 15 3/4" - 23 1/2" roller Live center 6MT Quick change tool block with holders Digital read out
|
Electrical Description |
|
Comments: |
- very nice machine in use only part time
Costs: Lathe and optional equipment $70,000 24" Buck 6 jaw chuck $8,399.00
|
|