We found 10 matching ads. Now displaying the remaining 10 ads.
(Tip: Click on the column headers to sort your results by that criteria)
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9863 | Hollow Spindle/Big Bore Engine Lathes |
1993 |
Hermes |
34-200 |
Very Good |
sold |
Photo /
More Info. |
34" x 200 inch: HERMES GAP BED ENGINE LATHE
Specifications:
Year of manufacture 12/01/1993
Serial number sn: 202960103
Swing over bed 34"
Swing in gap 42"
Length of gap 12"
Swing over cross slide 20"
Center distance 200"
Spindle speeds 5-670 rpm, 18 steps
Spindle bore 6 1/8"
Threading Yes, inch and metric
Chuck diameter 36" 4-jaw chuck
Chuck bore 6 1/8"
Taper attachment Yes
Steady rest 12" roller type steady rest
Comments: Mehanite casting, hard ways.
|
|
Ad # 12912 | Hollow Spindle/Big Bore Engine Lathes |
1984 |
Kuraki |
KH10-30 |
Excellent |
sold |
Photo /
More Info. |
: |
|
Ad # 11662 | Hollow Spindle/Big Bore Engine Lathes |
1975 |
LeBLOND |
NK4025 |
Good |
sold |
Photo /
More Info. |
LeBLOND Model NK4025 40" x 180" Hollow Spindle Engine Lathe:
LeBLOND Model NK4025 40" x 180" Hollow Spindle Engine Lathe
Item #1001 LeBLOND Model NK4025 40" x 180" Hollow Spindle Engine Lathe
Swing Over Bed: 40"
Swing Over Cross: 25"
Center Distance: 180"
Spindle Bore: 13"
Feeds/Threads: .004 - .250/ 1 7/16 - 24 TPI
Spindle Speed: 5 - 213 RPM
Main Motor: 30 HP 230/460/3/60
Equipped with:
¯
26" Cushman (4) Jaw Front Mounted Chuck
26" Cushman (4) Jaw Rear Mounted Chuck
(2) Way Power Rapid Traverse
12" 3 Point Roller Bearing Steady Rest
Aloris 4 Way Tool Post
Coolant Pump and Piping
Heavy Duty Tailstock
Dial Thread Chasing Attachment
Air Lift Heavy Duty Tailstock (Assisted by Rapid)
Scan-O-Matic Hydraulic Tracing Attachment
Manuals and Drawings
Approximate Dimensions: 340"(LR) X 105"(FB) X 64"(H)
Year Mfg. 1975
**SPECIFICATIONS SUBJECT TO VERIFICATION**
Rigging and Hauling Not Included
|
|
Ad # 10660 | Hollow Spindle/Big Bore Engine Lathes |
93 |
Poreba |
TPK 90A-1/3M |
Good |
SOLD |
Photo /
More Info. |
36" x 132" w/-4.5" spindle bore: 36" swing over ways
132" centers
24" 6 jaw chuck
tool post
2-steady rests
2-speeds on tale stock
inch/metric threads
power rapid travers
36" swing
28" swing over cross slide
4.5" thru hole
std specs below-please verify
Capabilities
Swing over bed 36 1/2"
Swing over gap 49"
Swing over cross slide 25"
Distance between centers ~ 118" or maybe 120"
Headstock
21 spindle speeds 9, 11, 14, 18, 22, 28, 35 1/2,
45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450,
560, 710, 900
Workpiece weight between centers 13,500 lbs.
Workpiece weight with 2 steady rest 20,000 lbs
Hole through spindle 3 3/4"
American standard direct mount spindle nose
A1-11
Chuck
24" Buck 6 jaw chuck
Feeds and threads
Longitudinal (70) ..0043 - .500 IPM
Cross feed range (70) .0021 - ..250 IPM
Top slide feed range (70) .001 to .125 IPM
Metric threads range 1 - 120 mm/rev.
Inch threads range 1/4 - 30 TPI
Carriage and apron
Cross slide travel 18 1/2"
Top slide travel 11 3/4"
Carriage length bearing bedways 33 3/4"
Carriage bridge width 16 1/2"
Rapid travels
Carriage 260 IPM
Cross slide 130 IPM
Top slide 65 IPM
Six way power feeds/spindle locked standard
Reverse feed direction no spindle direction
change standard
Carriage rear mount chip and coolant splash
guard standard
Tailstock
Quill diameter 5 1/8" with tang slot
Quill travel 11 3/4"
Quill taper No. 6 MT
Two speed quill travel 1:1 and 1:5 ratio
Miscellaneous
Main drive motor 2 speed AC 23 and 36 HP
Width of bed x depth 23" x 17 3/4"
Length = between centers + 8 feet
Width 7 feet
Net weight 19,400 lbs
Electrical
U.L approved
460 volt 3 phase 60 Hz
Standard equipment included
Coolant system
Automatic headstock lubrication
8T slotted top slide
Six way power rapid traverse
Chuck splash guards
Spindle positive lock at 5 degree increments
Longitudinal and cross slide limit switches
Ammeter
Optional equipment included with it
Steady rest 1 37/64" - 15 3/4" roller
Steady rest 15 3/4" - 23 1/2" roller
Live center 6MT
Quick change tool block with holders
Digital read out
|
|
Ad # 6520 | Hollow Spindle/Big Bore Engine Lathes |
|
LeBlond |
24" Hollow Spindle |
Good |
SOLD |
Photo /
More Info. |
24" x 18' Engine Lathe with 5-3/16" Spinde Bore: Swing: 24"
Distance Between Centers: 18'
Spindle Bore: 5-3/16"
Spindle Speeds: 12 - 292 rpm
20" 4-Jaw Chuck
2 x Steady Rests
Taper Attachment |
|
Ad # 8550 | Hollow Spindle/Big Bore Engine Lathes |
2006 |
GMC |
GT-1860DB |
Excellent |
Sold |
Photo /
More Info. |
18 swing x 60 centers: Featuring:
ISO 9001 certified
Large spindle bore 3-1/16”
Heavy Duty spindle D1-8
One-piece solid cast iron machine base
Heavy Duty guideway width 11 13/16”
Heavy Duty main motor 7.5HP
12 spindle speeds from 24-1,600 rpm, speeds: 24/ 32/ 55/ 70 / 95/ 160 / 240/ 320/ 550 / 700 / 950 / 1,600 rpm
40 kinds of inch threads, and 41 kinds of metric threads
Threading and feeding rate change without changing gears
Automatic kick-out longitudinal carriage stop system
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Standard Accessories:
Free Taper turning attachment, , installed
10” 3-jsw chuck with set reversible jaws
12” 4-jaw chuck with set reversible jaws
16” Face plate
10” drive plate
5 1/2” large steady rest
3” follow rest
Removeable gap
4-way tools post
Foot brake
Work light and coolant system
Manual Lube pump on apron for all guideways
Automatic kick-out longitudinal carriage stop system
Full length splash guard
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box
Specifications: GT-1860DB
GT-1860DB
Max. swing over bed 18”
Max. length of workpiece 60”
Max. swing over cross slide 11-5/16”
Max. Swing in gap 25 3/16”
Width of Bed 11 13/16”
Effective length in gap to spindle 10 ¼”
Effective length in gap to chuck jaws 3”
Spindle bore 3-1/16” , D1-8
Taper of spindle center M.T.# 6
Spindle speeds 24-1,600 rpm / 12 steps 24/ 32/ 55/ 70/ 95/ 160/ 240/ 320/ 550/ 700/ 950/ 1600 rpm
Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds
Cross feeds 0.0006-0.0126 IPR, 42 kinds
Inch threads 56-2 TPI, 40 kinds 56, 52,48, 46, 44, 40, 36, 32, 28, 26, 24, 23, 22, 20, 18, 16, 14, 13, 12, 11-1/2, 11, 10, 9, 8, 7, 6-1/2, 6, 5-3/4, 5-1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4, 2-1/2, 2-1/4, 2
Metric threads 0.4-14 mm , 53 kinds
Module threads 0.4-7 mm, 32 kinds
Diameteral pitch threads 32-4 DP , 32 kinds
Max. travel of top slide 5”
Max. travel of cross slide 12”
4-way tool post size 1” x 1”
Longitudinal leadscrew diameter / pitch 1-1/2” / 4 PTI
Max. weight of workpiece 800 LBS
Max. travel of tailstock quill 4-3/4”
Diameter of tailstock quill 2-1/8”
Taper of tailsotck quill center M.T. # 4
Main motor 7.5 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor 1/8 HP, 220V/440V, 3 phase, prewired on 220V
Net weight, approx. 5,950 LBS
Overall dimensions, LxWxH 88” x 41” x 108”
|
|
Ad # 8521 | Hollow Spindle/Big Bore Engine Lathes |
|
Longem |
LG-2080DS |
Very Good |
Sold |
Photo /
More Info. |
20 swing x 80 centers: 20" swing over ways, 80 " centers dist
12" swing over crosslide
gap bed
taper attach
2 axis readout
3-1/8" spindle bore
QC toolpost CXA |
|
Ad # 8522 | Hollow Spindle/Big Bore Engine Lathes |
90's |
MSC |
18-80G |
Good |
sold |
Photo /
More Info. |
18 swing x 80 centers: 18" swing over ways, 80" centers
16-1700 rpm
10" 3-jaw chuck
steady rest
toolpost
3-1/8" spindle bore
gap bed |
|
Ad # 12227 | Hollow Spindle/Big Bore Engine Lathes |
90s |
Summit |
20 x 80 |
Good |
Sold |
Photo /
More Info. |
20" x 80" 4 inch Spindle Bored: Summit
20" x 80"
12inch 3 Jaw Chuck
4 inch Spindle Bore
inch/metric threads
12" Swing over Crosslide
220/ 3 Phase
Steady Rest
Follwer Rest |
|
Ad # 13311 | Hollow Spindle/Big Bore Engine Lathes |
60's ? |
Warner Swasey |
# 4A / M-1190 |
Good |
sold |
Photo /
More Info. |
7-3/4" bore : 30" swing over ways: Warner Swasey # 4A big bore Turret Lathe
30" swing over bed ways, 20" over half cross
slide
50" center distance
Spindle Bore :7-3/4"
22" Dia 3 jaw chuck W'/ 7.5" thru hole
RPM: 8-211
HP : 15?
6 position turret
rigging/loading fee 1200.00 adder |
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|