| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9819 | Tool Room Lathe 8in. to 14in. swing |
| — |
— |
— |
— |
Sold |
Photo /
More Info. |
| 13 X 30" LEBLOND REGAL: 13 x 30"
IN EXCELLENT SHAPE WITH 3 JAW CHUCK TOOL HOLDER |
|
| Ad # 11941 | Tool Room Lathe 8in. to 14in. swing |
| — |
LeBlond |
— |
Good |
sold |
Photo /
More Info. |
| 14" Dia. swing x 42" between centers: LeBlond Engine Lathe
14" Dia. swing x 42" between center
Servo Shift
45-1800 rpm
inch threading
9" chuck
1.5" spindle thru |
|
| Ad # 11382 | Tool Room Lathe 8in. to 14in. swing |
| — |
LeBlond |
— |
Fair |
sold |
Photo /
More Info. |
| 12" x 24": 8" Swing over Carriage
24" Between Centers
Taper attachment (may need work)
Spindle hole 1" 1/4"
9 inch 3 Jaw Chuck |
|
| Ad # 11504 | Tool Room Lathe 8in. to 14in. swing |
| 1942 |
Monarch |
— |
Good |
sold |
Photo /
More Info. |
| 14" x 30": Monarch
14" x 30" Actual Swing and Center to Center
Taper In working Condition
24 x 1000 RPM
Steady Rest
220/ 3 Phase
3 Jaw 11" Chuck
Comes will Tooling
|
|
| Ad # 13124 | Tool Room Lathe 8in. to 14in. swing |
| — |
American Junior |
— |
Good |
sold |
Photo /
More Info. |
| —: machine in storage ,
comes with chip pan ,
8" - 3 jaw Rohm chuck , make offer |
|
| Ad # 13516 | Tool Room Lathe 8in. to 14in. swing |
| 1950s |
REED PRENTICE |
— |
Good |
sold |
Photo /
More Info. |
| Reed Prentice 20x56 Lathe, 10" Swing, : Reed Prentice Lathe
Reed Prentice 20x56 Lathe, 10" Swing,
3 Jaw,
4 Jaw chuck,
Face Plate
C to c 56
Voltage 230 460 3
Year 1950s
Can Load it |
|
| Ad # 11678 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Hendy |
— |
Good |
sold |
Photo /
More Info. |
| 8" x 36": Hendy
8" Swing over carriage x 36"
3 jaw 8" chuck
1- 1/16" Spindle bore
|
|
| Ad # 14481 | Tool Room Lathe 8in. to 14in. swing |
| — |
Cut King |
— |
Good |
sold |
Photo /
More Info. |
| 14"x36" With Gap: used Cut king lathe
capacity:14x36"
Has a 8"3 & a 10"4Jaw Chuck,
Steady Rest, Follow Rest, Coolant,& Tool Post.
English& Metric Threading
Made in Taiwan ,copy of Mori Seki |
|
| Ad # 5940 | Tool Room Lathe 8in. to 14in. swing |
| 1961 |
LEBLOND REGAL |
— |
Good |
Sold |
Photo /
More Info. |
| 13 x 42cc LEBLOND REGAL Engine Lathe: 13 x 42cc LEBLOND REGAL Engine Lathe
Max. swing over bed and carriage wings 14
Max. swing over compound rest 8
Bed width 12 3/16
Spindle bore 1 13/32
Spindle nose L00 tapered key
Cross slide travel 8 7/8
Compound rest travel 3 7/8
Center size No. 3 M.T.
Tailstock spindle diameter 1 5/16
Tailstock spindle travel 5
12 Spindle speeds 45-1800 RPM
48 Feeds .0018-.106 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Hardened replaceable bed ways
Swivel compound
12Dia. face plate
4-jaw chuck
6-jaw buck chuck
Thread dial
Micrometer carriage stop
Turret type carriage longitudinal stop
3-point plain Steady rest
Hand collet closer with nose
Live center
Chip Pan
3 H.P. 3/60/220-440 Volt Motor and controls
Wired for 3/60/440 Volt operation
|
|
| Ad # 12368 | Tool Room Lathe 8in. to 14in. swing |
| — |
precision rockwell lathe |
— |
— |
sold |
Photo /
More Info. |
| —: precision metal lathe,LOO MOUNT SPINDLE 5C COLLET DRAW BAR
3 JAW CHUCK
QUICK CHANGE TOOL HOLDER PHASE 2 TYPE OR ALORIS DRILL CHUCK LIVE CENTERS CUTTING TOOLS 3 PHASE MAACHINE AND MORE HEAVY DUTY MACHINE HAVE 2 available |
|
| Ad # 1518 | Tool Room Lathe 8in. to 14in. swing |
| unknown |
Hendley |
— |
Fair |
Sold |
Photo /
More Info. |
| Hendley 10" Lathe: Swing: 10"
Distance Between Centers: 30" |
|
| Ad # 5938 | Tool Room Lathe 8in. to 14in. swing |
| 1970 |
CLAUSING-COLCHESTER |
— |
Very Good |
Sold |
Photo /
More Info. |
| 13 x 36 cc CLAUSING-COLCHESTER Geared-Head Lathe: 13 x 36 cc CLAUSING-COLCHESTER Geared-Head Lathe
Max. swing over bed 13
Max. swing over saddle wings 12
Max. swing over cross slide 8
Bar capacity thru spindle 1 ½
Spindle bore 1 9/16
Spindle nose L-O tapered key
Cross slide travel 6 ½
Compound rest travel 3 Ύ
Tailstock spindle diameter 1 11/16
Tailstock spindle travel 4 Ό
Center in tailstock No.3 M.T.
Bed width 8 1/2
16 spindle speeds 40-1800 RPM
45 longitudinal feeds .0025-.068 IPR
45 cross feeds .0012-.034 IPR
Thread range 4-112 T.P.I
EQUIPPED WITH:
Geared head
Flame hardened bed-ways
Swivel compound
Thread indicator
Micrometer carriage stop
12 Dia. faceplate
9 Dia. 4-jaw chuck
6 Dia. 3- jaw universal chuck with
(4) sets of soft jaws
L-o back plate
Hand collet closer with nose (for 5C collets)
2-point plain follow rest
Drill chuck with adapter
Dead center
Headstock sleeve adapter with dead center
Boring bar
Steel cabinet base
Chip pan with splash guards
3/1 ½ H.P. 2-speed, 3/60/220 volt
motor with controls
|
|
| Ad # 13516 | Tool Room Lathe 8in. to 14in. swing |
| 1950s |
REED PRENTICE |
— |
Good |
sold |
Photo /
More Info. |
| Reed Prentice 20x56 Lathe, 10" Swing, : Reed Prentice Lathe
Reed Prentice 20x56 Lathe, 10" Swing,
3 Jaw,
4 Jaw chuck,
Face Plate
C to c 56
Voltage 230 460 3
Year 1950s
Can Load it |
|
| Ad # 5926 | Tool Room Lathe 8in. to 14in. swing |
| 1994 |
ROYAL |
#1340GHE |
Very Good |
Sold |
Photo /
More Info. |
| 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe: 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe
Max. swing over bed 13
Max. swing through gap 18 3/4
Length of gap in front of spindle nose 6
Max. swing over cross slide 7 1/2
Spindle bore 1 1/2
Spindle nose D1-4 Camlock
Tailstock quill diameter 1 5/8
Size of center in tailstock No. 3 M.T.
(8) spindle speeds 70-2000 RPM
Longitudinal feeds 0.0020-0.0273 IPR
Cross feeds 0.0006-0.0094 IPR
Thread range:
Inch 4-56 T.P.I.
Metric 0.4-7 mm.
EQUIPPED WITH:
Hardened bed ways
Removable gap bed
Swivel compound
Camlock spindle nose
5C hand collet closer with nose
6 dia. 3-jaw universal chuck
Micrometer carriage stop
(4) change gears
Inch/metric threading
3-point plain steady rest
2-point plain follow rest
Thread dial
Foot brake
Work light
Splash guard, pan bed and coolant pump
3 H.P. 3/60/220-440 volt motor with controls
Wired for 3/60/220 volt operation
|
|
| Ad # 13517 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTH BEND |
10" |
Good |
sold |
Photo /
More Info. |
| South Bend Lathe 10" swing 27" C TO C: South Bend Lathe 10" SWING C TO C 27"
South Bend Lathe with Cabinet Stand and
Backsplash.
Made in U.S.A.
Collet Chuck with Collets,
4 Jaw Chuck, Face Plate,
3 Jaw Chuck,
Telescoping Tailstock,
Quick Release Tool post,
Steady Rest,
Right and Left hand Threads...
Standard and Metric up to 480 T.P.I.
COMES WITH SOME Tooling.
C to c 27
Swing 10
220/3 volt motor
3/4hp
|
|
| Ad # 11947 | Tool Room Lathe 8in. to 14in. swing |
| 80s |
Weiler |
10" |
Excellent |
sold |
Photo /
More Info. |
| —: Weiler
speed lathe
10" swing x 20" centers ?
8" 3 jaw chuck
chuck guard
2-1/4" spindle bore
speeds -step pulley belt changeable: 125,185, 250,510,710,1000,355,500,710,1400,2000,2800 RPM
great for polishing parts
|
|
| Ad # 1723 | Tool Room Lathe 8in. to 14in. swing |
| — |
Bradford |
10" swing x 60"centers |
Good |
Sold |
Photo /
More Info. |
| 10" x 60" Engine Lathe-single phase 220/1: steady rest
toolpost grinder
3-jaw chuck 12"
single phase converter included |
|
| Ad # 1577 | Tool Room Lathe 8in. to 14in. swing |
| 1952 |
Shelton |
10" x 48" |
Good |
Sold |
Photo /
More Info. |
| 10" x 48" Shelton Engine Lathe: Swing: 10"
DBC: 48"
Misc Tooling including Chuck |
|
| Ad # 12085 | Tool Room Lathe 8in. to 14in. swing |
| 1960s |
Schaublin |
102 |
Excellent |
sold |
Photo /
More Info. |
| 8" x 14": SchauBlin 102
250-3600 RPM
Indexer Built in
Tail Stock
Quick Change Collect
Cutt Off Slide
6 Turret Tool Holder
Cross Slide |
|
| Ad # 10335 | Tool Room Lathe 8in. to 14in. swing |
| 1940s |
atlas |
102.07403 |
Very Good |
sold |
No Photo /
More Info. |
| idk: 12" atlas lathe. |
|
| Ad # 9823 | Tool Room Lathe 8in. to 14in. swing |
| — |
HARRISON |
10AA |
— |
Sold |
Photo /
More Info. |
| 10 X 20" HARRISON 10 AA LATHE: 10 x 20" centers
IN EXCELLENT SHAPE 3 JAW CHUCK TAPER ATTACHMENT CENTERS AND TOOL HOLDER |
|
| Ad # 9013 | Tool Room Lathe 8in. to 14in. swing |
| — |
Monarch |
10EE |
— |
Sold |
No Photo /
More Info. |
| 10": MONARCH 10 EE LATHE |
|
| Ad # 12887 | Tool Room Lathe 8in. to 14in. swing |
| ? |
atlas |
10x36 |
Good |
sold |
Photo /
More Info. |
| lake ariel: ATLAS 10X36 BED,NEW BEARINGS ,MOTOR,QUICK CHANGE TOOL POST WITH 7 HOLDERS,N... |
|
| Ad # 7091 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Christian |
11" x 24" |
Good |
sold |
Photo /
More Info. |
| 11" x 24" Swiss Built Tool Room Lathe: Swiss Made - metric only!
Swing: 11"
DBC: 24"
Spindle Bore: 1.00"
Chuck: 6"
Tailstock
NOTE: Machine is 380v/3-phase but has a 220v/3-phase transformer attached. |
|
| Ad # 10890 | Tool Room Lathe 8in. to 14in. swing |
| 2000 |
Turn Pro |
111.2000 |
Very Good |
sold |
Photo /
More Info. |
| 10" swing x 20" centers: 10" swing over bed , 6.5" over cross slide
20" between centers
6" 3 jaw chuck
135-3000 rpm
1 hp
1-1/4 spindle bore
english and metric threading
carriage vari speed auto feed
collet set 5c english and metric-shown
QC toolpost w/ 5 holders shown
coolant
manuals
rigging/loading fee 600.00 |
|
| Ad # 10661 | Tool Room Lathe 8in. to 14in. swing |
| 90,s |
Logan Powermatic |
1120003-TH |
Very Good |
sold |
Photo /
More Info. |
| 12x30: 8"-3jaw chuck
light
12"swingx30" |
|
| Ad # 8091 | Tool Room Lathe 8in. to 14in. swing |
| 1966?? |
Monarch |
12 ck |
Good |
Sold |
Photo /
More Info. |
| 14" x 30", Monarch Manual Lathe: 14" x 30", Monarch
Manual Lathe
Includes 8" 3 jaw
chuck,
12" 4 jaw D1-6
mount,
taper
attachment.
No tooling.
Old but dependable.
Motor is 5hp. |
|
| Ad # 8802 | Tool Room Lathe 8in. to 14in. swing |
| ?? |
Pratt & Whitney |
12 x 30 |
Good |
sold |
Photo /
More Info. |
| 12 swing x 30 centers: 12 " swing over ways, 8" over cross slide
1-1/4" spindle bore
8" 3 & 4 jaw chucks
steady rest
taper attachment
no toolpost
inch threading
collet wheel system-2J
3 HP
18-525 RPM |
|
| Ad # 7124 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hendy |
12x30 |
Good |
sold |
Photo /
More Info. |
| 12" x 30" Precision Engine Lathe With Taper Attachment : Swing: 12"
DBC: 30"
Includes:
QC Tool Post
10" 3-Jaw Chuck
Taper Attachment
TravaDial in Z
Collant System
Inch Threading |
|
| Ad # 9012 | Tool Room Lathe 8in. to 14in. swing |
| — |
Leblond |
13 x 32 |
— |
Sold |
Photo /
More Info. |
| 13 X 32" LEBLOND: 13 X 32 |
|
| Ad # 13414 | Tool Room Lathe 8in. to 14in. swing |
| — |
MSC Tool Room Lathe |
13 x 40 |
Excellent |
sold |
Photo /
More Info. |
| MSC Tool Room Lathe, 13" Swing, 40" centers: MSC metal working lathe -
13" x 40" MSC lathe
Like new condition can see run and can load for free.
Swing= 13 inch
Distance between centers= 40"
D1-4 Camlock, 3jaw chuck
standard and metric threading
230 volt 3 phase
|
|
| Ad # 13703 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Lux Cut |
1340 |
Needs Work |
sold |
Photo /
More Info. |
| 13" Swing x 40": Lux Cut Lathe
Model: 1340
Capacity: 13" swing x 40"
3 Jaw Chuck
Voltage: 220 3 phase |
|
| Ad # 14295 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Acra |
1340 |
Good |
Sold |
Photo /
More Info. |
| 13" Swing x 40" Centers: Acra turn 1340 Lathe
13" swing
centers:40"
3 jaw chuck:6"
4 jaw chiuck:8"
spindle rpm:45-1800
spindle bore: 1-3/8"
motor: 3HP
coolant
foot brake
gap bed
inch/metric threading
quick change toolpost Aloris BXA W/6 holders
Note: nice machine,all feeds work... |
|
| Ad # 10633 | Tool Room Lathe 8in. to 14in. swing |
| 87 |
Jet |
1340GHE/321351 |
Fair |
sold |
Photo /
More Info. |
| 13 x 40"--- 220/110 single phase: 13" Swing over bed ways, 8" swing over cross slide
inch/metric threading
coolant
QC tool post
8" 3 jaw chuck
3HP
70-2000RPM |
|
| Ad # 11403 | Tool Room Lathe 8in. to 14in. swing |
| — |
Lodge & Shipley |
14 |
Fair |
sold |
Photo /
More Info. |
| 14 x 80 : Swing: 14"
Distance Between Centers: 80"
Taper Attachment
Tailstock
2 chucks included 3 & 4 jaw
|
|
| Ad # 7630 | Tool Room Lathe 8in. to 14in. swing |
| — |
Lodge & Shipley |
14 x 80 |
Fair |
sold |
Photo /
More Info. |
| 14" x 80" L&S Engine Lathe With Lots of Tooling: Swing: 14"
Distance Between Centers: 80"
12" 3-Jaw Chuck
Tailstock
Steady Rest |
|
| Ad # 3459 | Tool Room Lathe 8in. to 14in. swing |
| 70's? |
Rockwell |
14" swing x 42"centers |
Good |
Sold |
Photo /
More Info. |
| Small toolroom /home shop lathe: 14" swing over ways x 42" center distance
taper attachment
40-160RPM
steady rest
8" 3-jaw chuck,LO type
6" 4-jaw chuck
1.5" spindle bore
inch threads
live center |
|
| Ad # 2601 | Tool Room Lathe 8in. to 14in. swing |
| 80's |
Clausing |
14" x 40" |
Good |
Sold |
Photo /
More Info. |
| Quality gear head lathe: 14" swing x 40" centers
10" 3-jaw chuck
1.5" spindle bore
misc tooling |
|
| Ad # 13491 | Tool Room Lathe 8in. to 14in. swing |
| 1955 |
American Tool Works |
14"x84" |
Good |
sold |
Photo /
More Info. |
| 14" x 84" American Tool Works Pacemaker Lathe : 14" x 84" American Tool Works Pacemaker Lathe
Good condition
Year 1955
Voltage 230 3
Under power
14 swing over bed
84 c to c
1 Ύ spindle bore
Tool holders included
|
|
| Ad # 12711 | Tool Room Lathe 8in. to 14in. swing |
| 2007 |
Cut Master |
1440 |
Excellent |
sold |
Photo /
More Info. |
| 14" Swing X 40" length: 3 hp motor
Digital Readouts
3 Jaw Chuck
4 Jaw Chuck
Face Plate
Steady Rest
Follow Rest |
|
| Ad # 14846 | Tool Room Lathe 8in. to 14in. swing |
| 2001 |
Turn Pro |
1440 |
Good |
sold |
Photo /
More Info. |
| 13" x 40": Turn Pro 1340 Lathe #111-3115
6" -3 Jaw Chuck
Steady Rest
85-2000 RPM
1"-1/2" Spindle bore
Machine is very low hours.
|
|
| Ad # 9108 | Tool Room Lathe 8in. to 14in. swing |
| 2008 |
Victor |
1440B |
Demo Machine |
Sold |
Photo /
More Info. |
| 14 in swing x 40 in centers: Standard Equipment
6" 3-jaw chuck
Steady/follow rest
face plate
halogen work light
8" 4-jaw chuck
4-way toolpost
full length splash guard
Quick Change toolpost W/ 5 holders set
A little tooling included
Features:
Powerful 3HP single speed motor gives full power over all 12 speeds!
High speeds 40-2,000RPM(12)speed ranges
D1-4 Camlock spindle
jog button for easy gear changes
Quick change-english/metric gear box
safety clutch for feed rod
full length foot brake
coolant pump
Weight-1,936Lbs
Specifications Victor- 1440B
Spindle bore 1.5"
Swing over bed 14"
Swing over gap 20"
Between centers 39.5"
Spindle RPM 40-2,000(12)steps
Spindle nose D1-4
Horsepower 3HP
Swing over cross slide 8-5/8"
Threads Metric0.4-7.0mm x 32 kinds English 4-56TPI
Bed width 8"
crosslide travel 7"
Coumpound travel 4"
Tailstock Quill #3MT
|
|
| Ad # 12672 | Tool Room Lathe 8in. to 14in. swing |
| 1997 |
Nardini |
1440E |
Excellent |
sold |
Photo /
More Info. |
| 14" x 40": Nardini MS 1440E
14" x 40"
220/3 Phase
25-2000 RPM
inch and metric threads
3 Jaw 8" Chuck
8" Over Cross Slide
4" Steady Rest
2" Spindle Bore
Quick change tool post w/ a few holders
machine was fully tested and inspected -all good.. |
|
| Ad # 13957 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Clausing |
1500 |
Good |
sold |
Photo /
More Info. |
| 14" Swing x 48" between centers: Clausing Lathe
Model: 1500
Capacity: 14 Swing x 48" between centers
Electrical: 220/3 phase, single phase converter included
3 and 4 Jaw chuck,collets, live center, metric gears, 5
h.p.-3Ψ motor with 1Ψ converter,extra oil
Note: slight leakage of some seals
SWING OVER CARRIAGE 8-1/4"
BED WIDTH 11"
SPINDLE BORE 1-9/16"
SPINDLE NOSE D1-4 CAMLOCK
SPINDLE SPEEDS INFINITELY VARIABLE:
LOW GEAR DRIVE 45 - 255 RPM
INTERMEDIATE GEAR DRIVE 180 - 1000 RPM HIGH
DIRECT DRIVE 360 - 2000 RPM
ENGLISH THREAD RANGE (54) 4 - 224 TPI
LONGITUDINAL FEED RANGE (54) .00065" - .0374" PER
REV
CROSS FEED RANGE (54) .00033" - .0187" PER REV
TAILSTOCK TRAVEL 5"
TAILSTOCK SPINDLE TAPER #4 MT |
|
| Ad # 9509 | Tool Room Lathe 8in. to 14in. swing |
| — |
Republic |
16S |
Good |
sold |
Photo /
More Info. |
| 8" chuck, approximate 40" between centers: 16" swing x 40"
8" chuck, 40" between centers approximate. |
|
| Ad # 4760 | Tool Room Lathe 8in. to 14in. swing |
| 1961-8 |
DAINICHI |
1928 |
Good |
sold |
Photo /
More Info. |
| DANICHI MACHINE: MANUAL VERTICAL MOVEMENT OF TABLE SHALL BE DONE WHILE THE FEED SYSTEM IS RO... |
|
| Ad # 8635 | Tool Room Lathe 8in. to 14in. swing |
| — |
leblond |
21 x 80 |
Good |
sold |
Photo /
More Info. |
| 21 x 80: 8" 3jaw chuck
10' aol
lenght work area 7ft.
spindle bore 1.5 inches..
swing over ways ??"...
swing over cross slide 13"
|
|
| Ad # 9317 | Tool Room Lathe 8in. to 14in. swing |
| 1980 |
Logan |
2555VLH |
Good |
sold |
Photo /
More Info. |
| 10" swing over bed / 18" between centers: 12" swing over bed /no gap / 18" between centers
Has 8" 3jaw chuck/ 2 tool holders
V/S Spindle Drive 55/2000 RPM.
Live center and new drill chuck.
parts manual
can skidded |
|
| Ad # 12738 | Tool Room Lathe 8in. to 14in. swing |
| — |
South Bend |
31" 1/2 |
Good |
sold ? |
Photo /
More Info. |
| 9"swing x 32"centers: SouthBend Lathe #31" 1/2
9" swing x 32" center |
|
| Ad # 5935 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
444Z |
— |
Sold |
Photo /
More Info. |
| 9" x 22"cc SOUTHBEND Model A Bench lathe with table: 9" x 22" cc SOUTHBEND Model A Bench lathe with table, Bed length 3 1/2'
Collet capacity 1/2"
Max. swing over bed 9 1/4"
Max. swing over cross slide 5 1/2"
Hole through spindle 3/4"
Cross slide travel 5 7/8"
Compound rest top slide travel 2 1/4"
Tailstock spindle taper No. 2 M.T.
Tailstock spindle travel 2 1/8"
6 Spindle speeds 41-658 RPM
Longitudinal feeds .0015-.0853 IPR
Cross feeds .0004-.0252 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount
Swivel compound
Power longitudinal and cross feeds
Threading with thread dial
5" dia. 3-jaw universal chuck with (2) sets of jaws
3-point plain steady rest
Plain toolpost
Drill chuck
Live center
Dead center
Carriage stop
1 H.P. 3/60/220-440 volt motor with reversing control
Wired for 3/60/440 volt operation
|
|
| Ad # 5936 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
444Z |
Good |
Sold |
Photo /
More Info. |
| 9" x 22"cc SOUTHBEND model A bench lathe with table: 9" x 22"cc SOUTHBEND model A bench lathe with table, bed length 3 1/2'
Collet capacity 1/2"
Max. swing over bed 9 1/4"
Max. swing over cross slide 5 1/2"
Hole through spindle 3/4"
Cross slide travel 5 7/8"
Compound rest top slide travel 2 1/4"
Tailstock spindle taper No. 2 M.T.
Tailstock spindle travel 2 1/8"
6 Spindle speeds 41-658 RPM
Longitudinal feeds .0015-.0853 IPR
Cross feeds .0004-.0252 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount
Swivel compound
Power longitudinal and cross feeds
Threading with thread dial
5 dia. 3-jaw universal chuck
3-point plain steady rest
Plain toolpost
(3) drill chucks
Live center
½ H.P. 3/60/220-440 volt motor with reversing control
Wired for 3/60/440 volt operation
|
|
| Ad # 12814 | Tool Room Lathe 8in. to 14in. swing |
| N/A |
Clausing |
5914 |
Good |
sold |
Photo /
More Info. |
| 12" swing x 40" centers: Make: Clausing
Model: 5914
12" swing x 40" centers
8" 3 jaw chuck
english & metric threading
taper attachment
HP: 2
Manual Control
Voltage:230/3Phase |
|
| Ad # 7154 | Tool Room Lathe 8in. to 14in. swing |
| — |
Clausing |
5914 |
Good |
SOLD |
Photo /
More Info. |
| 13" x 48" Clausing Tool Room Lathe : Swing: 13"
DBC: 48"
Spindle Speeds: Variable in 2-Stages from 20 - 2,000 rpm
Includes:
8" 4-Jaw Chuck
Taper Attachment Type 7114
Steady Rest: (0-4"?)
Tool Post
3 Tool Holders |
|
| Ad # 13459 | Tool Room Lathe 8in. to 14in. swing |
| 1967 |
Clausing |
6329 |
Excellent |
sold |
Photo /
More Info. |
| 12" x 36" Clausing Lathe : Clean 12" x 36"
Clausing variable speed, floor mounted, metal lathe model #6329.
Spindle bore is a substantial 1 1/2" and the tailstock is a generous #3MT (with #1MT-to-#3MT and #2MT-to-#3MT adapters)
Includes faceplate,
3-jaw 6" Cushman chuck, 4-jaw 8" Buck chuck, steady rest, boring bar, milling attachment, bed turret, collet closer
Full set of 34 Hardinge 5C collets.
Features a full set of MT drill bits
Jacobs 1/2" drill chuck.
Aloris BXA tool post with 6 tool holders
Armstrong wrenches, a NIB Clausing #7529 thread cutting stop, both #0MT-to-spindle and #1MT-to-spindle adapters, and a bed-mounted micrometer carriage stop.
Many spare parts including, bearings, seals, gaskets, and more.
1 1/2 HP Dayton motor wired for 120V
30-1300 RPM forward and reverse spindle speeds on new drive belts.
Cuts 4-28 threads per inch, leadscrew and split nuts are new and threading dial works like it should.
Back gear engagement is smooth; gibs are properly adjusted and very little play in cross slide and compound assemblies.
Cuts tapered shafts with tailstock setover adjustment and all bedways are smooth and flat.
This lathe runs quiet, does not vibrate, and cuts straight.
Parts manual, L00 spindle blueprints, and all lubricants.
Excellent condition and perfect for gunsmith work.
Moving, must sell.
|
|
| Ad # 7171 | Tool Room Lathe 8in. to 14in. swing |
| — |
LeBlond |
8 x30 |
Very Good |
Sold |
Photo /
More Info. |
| LeBlond 8-1/2" x 30" Tool Room Lathe : Swing: 8-1/2"
DBC: 30"
Includes a 3-Jaw and a 4-Jaw chuck
Chuck has a "5-C Collet Attachment"
|
|
| Ad # 10571 | Tool Room Lathe 8in. to 14in. swing |
| 2005 |
Vectrax/MSC |
82837915 |
Excellent |
Sold |
Photo /
More Info. |
| 14" swing x 40" centers: 14 " swing x 40" centers
sheet metal base cabinet
1.5" spindle bore
steady rest & follower rest
6" 3 jaw chuck & 4 jaw 8 " chuck
std. toolpost
manuals and tool box
inch & metric threading
|
|
| Ad # 11005 | Tool Room Lathe 8in. to 14in. swing |
| 1994 |
MSC |
951735 |
Very Good |
sold |
Photo /
More Info. |
| 13 x 40: 13" swing
40" centers
1-3/8" spindle bore
3HP main motor
Comes With:
2-3 Jaw Chucks (6 & 8")
4 Jaw Chuck
Follow & Steady Rest
Aloris Tool Post w/ 6 Tool Holders
DRO
Drill Chuck
Live Center
Lever Operated 5C Collet Attachment |
|
| Ad # 15823 | Tool Room Lathe 8in. to 14in. swing |
| 19? |
Harrison |
AA-13" |
Good |
sold |
Photo /
More Info. |
| 13" swing x 25"centers: Harrison #AA13 centre lathe:13"swing x 25"centers
motor HP:3HP ;220/3 voltage
swing over bed:13"
vari-speed drive:35-3000rpm max
coolant system
spindle bore:1.5"
QC toolpost w/holders
taper attachement
collet closer system w/many collets shown
3 jaw chuck:D1-4nose
steady rest/follower
metric/inch hand wheels
change gears
foot brake
2 axis digital readout
Note:nice little loaded lathe!
|
|
| Ad # 5924 | Tool Room Lathe 8in. to 14in. swing |
| — |
SMC |
BV18VS |
New |
Sold |
Photo /
More Info. |
| 6" x 14" Single Phase SMC BV18VS Bench type lathe: 6" x 14" cc SMC BV18VS Bench type lathe,
New, never used
Maximum swing over bed ways 6 7/8"
Maximum swing over cross slide 4 1/2"
Maximum length between centers 14"
Spindle bore 13/16"
2-ranges of spindle speeds
EQUIPPED WITH:
Induction hardened bed ways
3" diameter 3-jaw universal chuck
Built-in 4-way square toolpost
Plastic chip guard
Power feeds
Variable speed drive
1/60/110 volt electric
|
|
| Ad # 5937 | Tool Room Lathe 8in. to 14in. swing |
| 1965 |
SOUTHBEND |
Catalogue #CL187RB |
Good |
SOLD |
Photo /
More Info. |
| 10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base: 10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base, catalogue #CL18... |
|
| Ad # 5955 | Tool Room Lathe 8in. to 14in. swing |
| 1956 |
SOUTHBEND |
Catalogue #CL8-185D |
Good |
Sold |
Photo /
More Info. |
| 14 ½ x 48cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D: 14 ½ x 48cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D
Max. swing over bed 14 5/8
Max. swing over cross slide 8 15/16
Capacity thru spindle 1 3/8
Max. collet capacity 1 1/16
Spindle nose D1-4 Camlock
Center size No.3 M.T.
Spindle speeds to 875 RPM
48 longitudinal feeds .0015-.0841 IPR
48 cross feeds .0006-.0315 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Swivel compound
4-step cone pulley belt drive headstock
D1-4 Camlock Spindle nose
Hand collet tube with nose and (10)
5C collets w/ rack
8 Dia. 3-jaw universal chuck
3 point plain steady rest
Aloris tool post with (3) tool blocks
Drill chuck
Live center
Misc. tooling
2 H.P. AC Motor drive w/ controls
|
|
| Ad # 8425 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
CL-1307 |
Good |
sold |
Photo /
More Info. |
| USED 13in x 20in SOUTHBEND ENGINE LATHE: Serial Number: 72 SP 132
MAXIMUM SWING OVER BED: 13"
MAXIMUM SWING OVER CROSS SLIDE: 7"
DISTANCE BETWEEN CENTERS: 20"
SPINDLE SPEEDS: VARIABLE TO 4,000 RPM
SPINDLE HOLE: 1-3/8"
SPINDLE NOSE: D-1-3" CAMLOCK
THREADS: (96) 2-1/2 TO 152 TPI
FEEDS: (96) .0005" TO .0307"
CROSS SLIDE TRAVEL: 7"
TOP SLIDE TRAVEL: 2-5/8"
TAILSTOCK SPINDLE TRAVEL: 4"
TAILSTOCK SPINDEL DIAMETER: 1-5/8"
MOTOR: 5 HP
EQUIPPED WITH:
TAPER ATTACHMENT
COLLET CHUCK
STEADY REST
HARD BED WYAS
CHUCK GUARD
TAILSTOCK
CHIP PAN BED
|
|
| Ad # 11535 | Tool Room Lathe 8in. to 14in. swing |
| 1974 |
South Bend |
CL8187RB |
Very Good |
sold |
Photo /
More Info. |
| 10" swing, 4.5" bed: Lathe is in very good condition
Lightly used, not used for production
D14 camlock spindle
Rohm 3 jaw chuck
SB face plate and drive plate
5c collets and draw bar
Some misc tooling and documentation included
Accurite dro included (currently not working) |
|
| Ad # 12087 | Tool Room Lathe 8in. to 14in. swing |
| 1981 |
Clausing |
Colchester |
Excellent |
sold |
No Photo /
More Info. |
| 11 x 30: 2-hp, 3 jaw buck chuck,aloris quick change tool post,metric and inch thread... |
|
| Ad # 15363 | Tool Room Lathe 8in. to 14in. swing |
| — |
Clausing |
Colchester |
Fair |
sold |
Photo /
More Info. |
| 12x32: 220v clausing colchester has brand new baldor 3hp
reversible
motor new belts and new oil in head has 3& 4
jaw chucks
taper attachment follow rest and quick change
tool post more
info upon request |
|
| Ad # 12815 | Tool Room Lathe 8in. to 14in. swing |
| N/A |
import |
CT-918A |
Good |
sold |
Photo /
More Info. |
| 8 x 20: Model:CT-918A
8" swing over ways 4" over crosslide
20" centers
5" chuck 3 jaw
Voltage:110/Single Phase
Good Condition |
|
| Ad # 12435 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
DV 59 |
Good |
sold |
Photo /
More Info. |
| 6" x 16": Hardinge
6 Jaw Chuck
Tail Stock
Voltage 220/ 3 Phase
9" swing
11/16" collet capacity
6" step chuck capacity
5" jaw chuck capacity
|
|
| Ad # 7205 | Tool Room Lathe 8in. to 14in. swing |
| 1965 |
MONARCH |
EE |
Very Good |
Sold |
Photo /
More Info. |
| 10 x 20cc MONARCH EE Precision toolmakers Lathe: 10 x 20cc MONARCH EE Precision toolmakers Lathe
Max. swing over bed 12 1/2
Max. swing over cross slide 7 Ό
Max. distance between centers 20
Hole through spindle 1 13/32
Spindle nose D-1-3 Camlock
Bed width 10 ½
Compound rest top slide travel 2
Tailstock Spindle diameter 1 Ύ
Tailstock Spindle traverse 3 ½
Variable Spindle speed range 8 to 4000 RPM
50 feeds .005-.016 IPR
Thread range 3-184 T.P.I.
EQUIPPED WITH:
Induction hardened bed-ways
Swivel compound
D-1-3 Camlock Spindle nose
6Dia. 3-jaw chuck
Hand collet closer with collet nose
JACOBS collet chuck
Taper turning attachment
Square Toolpost
Pan bed
5 H.P. with new AC inverter drive and controls |
|
| Ad # 7799 | Tool Room Lathe 8in. to 14in. swing |
| 2006 |
JET |
GH-1440ZX |
Excellent |
Sold |
Photo /
More Info. |
| 14" x 40" Gap Bed Precision Lathe with 3-1/8" Spindle Bore: Distance Between Centers: 40"
Swing Over Bed: 14"
Swing Over Cross Slide: 7-5/8"
Swing Over Gap (Bed Removed): 23-5/8"
Length Through Gap: 12-1/4"
Spindle Bore: 3-1/8"
Spindle Mount: D1-8
Spindle Speed Range: 42" - 1,800 rpm in 12 Stages
Spindle Drive: Gear Driven
Tailstock
Quick Change Tool Post
|
|
| Ad # 14847 | Tool Room Lathe 8in. to 14in. swing |
| 2005 |
KBC |
Grip-1440G |
Excellent |
sold |
Photo /
More Info. |
| 14" x 40": KBC Lathe 1440G # 6-269-006
45-1800 RPM-16speeds
6"-3 Jaw Chuck-D1-4 mount
motor 3HP 230/3 voltage-2 speed
swing over carriage:8.75 inch,over gap:20"
tailstock:3MT
hardened and ground gears and bed ways
foot brake
work light
spash guard
inch/metric threading
Steady Rest
Follower Rest
coolant
4 way toolpost
1"-1/2" Spindle Bore
mfg list price:7000.00
Machine is like New, very little use
|
|
| Ad # 11689 | Tool Room Lathe 8in. to 14in. swing |
| 1970s |
Hardinge |
HC |
Very Good |
sold |
Photo /
More Info. |
| 9" x 13": Hardinge HC
9" x 13"
8 Station turret
Model CTA Tool Post (Thread unit)
1" 1/8 Spindle Bore
125-3000 RPM |
|
| Ad # 4424 | Tool Room Lathe 8in. to 14in. swing |
| 80's |
Hardinge |
HC |
Excellent |
Sold |
Photo /
More Info. |
| Super Precision Hardinge HC Chucker: Automatic Threading attachment.
Includes lots of misc. tooling |
|
| Ad # 1581 | Tool Room Lathe 8in. to 14in. swing |
| 1976 |
Hardinge |
HC High Speed Precision |
Good |
Sold |
Photo /
More Info. |
| Hardinge High Speed/High Precision Compact Lathe: Precision chuck
Threading
Approx 50 pieces of tooling including collets |
|
| Ad # 12739 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
HCT |
Good |
sold |
Photo /
More Info. |
| —: Hardinge HCT
6 Station Tool Turret
3 Jaw Chuck 4" |
|
| Ad # 12531 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
HLV-H |
Needs Work |
sold |
Photo /
More Info. |
| 6" x 12": Hardinge HLV-H
Cutting Diameter :279 mm
Cutting Length :457 mm
Bar / Bore :32 mm
Tool Stations :1 to 4
Spindles :1
Motor Power :2 HP
Spindle Speed :3000 rpm |
|
current group
groups previously viewed
groups not yet viewed
