Year:
| 1995?
|
Make:
| OKUMA
|
Model:
| LT 25-M
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Requires rigger
|
Weight: | 25,30 lbs
|
Dimension: L x W x H | 186" x 84" x 92"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Control: OSP 5020-L
Number of controlled axes: 7 Swing over bed: 25.59" Swing over saddle: 19.68" Max. Distance of spindle noses: 57.08" Max. turning diameter: 11.81
Headstock & Main Spindle Spindle nose: L,R:JIS A2-8 Spindle diameter at front bearing L,R:4.72" Bore diameter: Left: 2.125" Right: 3.15 Range of spindle speed: L,R:38 to 3,800 rpm Number of spindle speeds: L,R:2
Cross-Slide (X-axis) & Carriage (Z-axis)
Cross-slides travelX-axes (XA and XB)10.42" Longitudinal travel: Z-axes ZA: 22.44" ZB: 44.88" ZC: 22.44"
Servomotor: X-axes XA5.3 hp XB5.3 hp Z-axes ZA, ZB, ZC:5.3 hp
Rapid-traverse speed X-axes787 ipm Z-axes945 ipm
Cutting feedrate, X and Z 0.0001 thru 40.0000 IPR Slide thrust: (Continuous) X-axes: 1,223 lbs Z-axes: 2,396 lbs
MACHINE SPECIFICATIONS
Turret (VDI) Type and No. of tool stationsV12 + V12 Tool size: O.D.1" x 1" I.D1.50" Turret size (across flats)15.74" Size of index coupling9.45" Turret index time: 0.25 seconds (Station-Station) Rotary Tool Spindle Speed100-3,000 RPM Rotary Tool Speed Range1 • Infinitely Variable
Electric Motor
Main spindle drive motor: VAC 30 hp (20 min.) M-Spindle MotorVAC 5 hp Hydraulic oil pump motor5 hp Coolant pump motor1/3 hp x 2 Tank Capacity Hydraulic power unit20 gal. Coolant tank106 gal Lubrication tank 1.6 gal.
|
Electrical Description |
|
Comments: |
- Auto Door Actuation
C-X Contouring C-Axis on Left hand spindle Chip Conveyor Tape Reader ONE-TOUCH IGF Tool Holders (no tools)
NOTE: As with a NEW machine, NO chucks are supplied with this machine
Can be offered with or without a Spego 12' bar feeder. Additional $11,000.00
More Photos on request
|
|