| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5638 | Turning Center 4 - 10 in. chuck |
| ? |
Mori Seki |
SL-3HS |
Good |
SOLD |
Photo /
More Info. |
| Mori Seiki CNC turning center: Funuc OT Control
Tool touch probe
10" 3 jaw chuck
20" swing
24" center
2-1/2 spindal
Coolant feed turret |
|
| Ad # 6617 | Turning Center 4 - 10 in. chuck |
| — |
JONES & LAMSON |
4512 |
Needs Work |
sold |
Photo /
More Info. |
| JONES & LAMSON MODEL 4512 COMBI CNC LATHE: JONES & LAMSON MODEL 4512 COMBI CNC LATHE
MAXIMUM BAR SIZE: 4-1/2"
MAXIMUM SWING: 22"
SWING OVER CROSS SLIDE: 12-1/2"
LONGITUDINAL TRAVEL (Z-AXIS): 18"
CROSS TRAVEL (X-AXIS): 14"
MAX. DISTANCE SPINDLE TO TURRET FACE: 31"
TOOL POSITIONS: 12
TYPE OF TURRETS: END & SIDE
SPINDLE NOSE: B-1-11"
HOLE THRU SPINDLE: 5-1/4"
SPINDLE SPEEDS: (VAR.) 20 TO 1200 RPM
FEED RATES: (VAR.) .01 TO 300 IPM
RAPID TRAVERSE RATE: 300 IPM
MOTOR: 40 HP
EQUIPPED WITH:
FANUC OT CNC CONTROL
COOLANT
SPLASH/CHIP GUARDS
NOTE - MACHINE REMANUFACTURED AND RETROFIT WITH FANUC OT CNC CONTROL IN 2002.
no manuals
needs work |
|
| Ad # 2372 | Turning Center 4 - 10 in. chuck |
| — |
Okuma |
LB10 |
Needs Work |
Sold |
Photo /
More Info. |
| CNC Lathe Horizontal: 6" chuck
1 1/4" spindle bore
Hydraulic tail stock
10 station Turret
Tool pre-setter
Control type: Okuma OSP5000L |
|
| Ad # 9413 | Turning Center 4 - 10 in. chuck |
| — |
Mori Seiki |
ZL-15S |
Good |
sold |
Photo /
More Info. |
| Bar capacity, round 1.6": Bar capacity, round 1.6"
Spindle bore 2.05"
Swing over bed, Max 18.9"
Swing over cross slide 14.6"
Turning diameter, Max 9.06"
Turning length, Max 3.94"
Rapid traverse rate, X-Axis 472 IPM
Rapid traverse rate, Z-Axis 590 IPM
Spindle speeds, main spindle 50-5000 RPM
Spindle speeds, sub spindle 60-5000 RPM
Main spindle drive motor, Horsepower 10/7.5 HP
Subspindle drive motor, Horsepower 7.5/5 HP
Mori-Seiki MF-D6 CNC Control
FMB Turbo 5-42 Bar Feed
Collet Chuck on Mian and Sub Spindle
12-Position Upper Turret
Parts Catcher - Chip Conveyor
|
|
| Ad # 13936 | Turning Center 4 - 10 in. chuck |
| — |
Mazak |
QT 10N |
Good |
sold |
Photo /
More Info. |
| 8" chuck: 8" Hyd Chuck, Tail Stock ,
22"cc MazatrolCam T2 Control
Machine Just came off line, Replaced with Haas |
|
| Ad # 5441 | Turning Center 4 - 10 in. chuck |
| — |
Clausing |
Colchester |
Good |
Sold |
Photo /
More Info. |
| Clausing Colchester Lathe: Clausing Colchester Lathe; 15" x 60"; Coolant; Turret attachment; 230 volts... |
|
| Ad # 16012 | Turning Center 4 - 10 in. chuck |
| 03-13 |
MAZAK |
QuickTurn 200-12D |
Excellent |
sold |
Photo /
More Info. |
| Mazak 13" x 20" CNC Lathe: Mazak Quick Turn Smart 200 Cnc Turning Center
New: 2013
Max Cutting Diameter 13.78″
Max Cutting Length 19.6″
Max Swing 25.98″
Swing Over Cross Slide 14″
Z-Axis Travel 22″
X-Axis Travel 7.75″
Spindle Speed 35 To 5,000 Rpm
Spindle Motor 20/15 Hp
Bar Capacity 2″
Spindle Nose A2-6
Rapid Traverse Z 1299 Ipm / X 1181 Ipm
Equipped With:
* Mazatrol Smart Conversational Cnc Control
* 8" 3-Jaw Chuck
* 12 Position Turret
* Manual Tool Eye
* Jorgensen Chip Conveyor
NOTE: Quantity of Tooling is also available but
is NOT included in machine price but can be
purchased separately either asa whole or per
piece. Please ask for details
|
|
| Ad # 10260 | Turning Center 4 - 10 in. chuck |
| 07 |
CQK |
9332B |
Demo Machine |
Sold |
Photo /
More Info. |
| 6" chuck 10x18: Geared lathe
thru hole 2.5"
max workpiece18"
10" over ways
fast feed stepless 3m/m
spindle speed=80-1600 rpm
|
|
| Ad # 4989 | Turning Center 4 - 10 in. chuck |
| 70's? |
Hardinge |
AHC |
Very Good |
sold |
Photo /
More Info. |
| Hardinge AHC-Automatic Chucker Lathe: 1-1/16" bar capacity
13" swing over ways, 6" over cross slide
12' bar feed
6 position turret
new top shield added
cut-off/ threading attachment option
much tooling included,collets, holders,
coolant
roll-around console control
needs brake adjusted-minor work |
|
| Ad # 7941 | Turning Center 4 - 10 in. chuck |
| 77-78 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
12' bar feed
6 position turret
cut-off attachment
Automatic threading attachment
Taper Attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 411 | Turning Center 4 - 10 in. chuck |
| 80's |
HARDINGE |
CHNC-4 |
Good |
Sold |
Photo /
More Info. |
| CNC CHUCKER LATHE : 1-5/8" SPINDLE BORE CAP;5" AIR CHUCK; 8 STATION TURRET |
|
| Ad # 13167 | Turning Center 4 - 10 in. chuck |
| 80s |
Mori Seiki |
SL - OH |
Good |
sold |
Photo /
More Info. |
| 7.5" x 8": Mori Seiki
Model SL-OH
Specifications:
Swing Over Bed 7.5"
Max. Machining Diameter 7.5"
Max. Machining Length 8.3"
Turret Type 8 Position Turret
X-Axis Travel 4.92"
Z-Axis Travel 7.68"
Spindle Nose A2-5"
Spindle Motor 30 Min. / Contin 7.5 HP / 5 HP
Spindle Speed 6000 RPM
Spindle Bore 1.7"
Bar Capacity 1.375"
Machine Weight 5,060 Lbs.
|
|
| Ad # 8497 | Turning Center 4 - 10 in. chuck |
| 80's? |
Hitachi Seiki |
4NE-600 |
Needs Work |
Sold |
Photo /
More Info. |
| 22in x 24in Hitachi CNC Slant Bed Lathe: Control: Fanuc System 5T
Swing: 22.8"
Length: 24"
Chuck: 10" diameter Buck Chuck
Spindle Bore: 2-7/8" diameter
Spindle Speeds 20 -3150 RPM
Spindle drive: 15 hp
12 Station Turret
RS232 cable wired into cotrol box to program offline! |
|
| Ad # 8956 | Turning Center 4 - 10 in. chuck |
| 85?? |
Hitachi Seike |
3NE |
Good |
sold |
Photo /
More Info. |
| 6.5 in chuck, no tailstock-chucker: chucker-no tailstock
control-Fanuc 6T
6.5" 3 jaw chuck
12 station turret
RS232 port
approx: 15HP ?
spindle bore 1-3/4"
renishaw probe interface box
rigging fee to load 600.00 |
|
| Ad # 13716 | Turning Center 4 - 10 in. chuck |
| 87 |
Mazak |
QT8 |
Needs Work |
sold |
Photo /
More Info. |
| —: CONTROL: MAZATROL T-2
MAX. SWING: 11"
STANDARD CUTTING DIA: 4"
MAX. CUTTING DIA: 6"
CUTTING LENGTH: 10"
SPINDLE BORE: 1.97"
SPINDLE SPEED: 4500 RPM
NUMBER OF TOOLS: 8
X AXIS STROKE: 3.75"
Z AXIS STROKE: 11.4"
Note: needs board replaced -have new board
but
not tested machine |
|
| Ad # 12555 | Turning Center 4 - 10 in. chuck |
| Mid 90s |
Cincinnati |
Talon 210 |
Good |
sold |
Photo /
More Info. |
| 20 HP 10" x 22" : Max Swing Over Bed 20.86"
Max Swing Over Carriage 11.80"
Max Tailstock Position 21.60"
Max Machinable Center Distance. 23.60"
Chuck Size. 10"
Cross Travel (X-Axis 6.8"
Longitudinal Travel (Z-Axis) 23.6"
Feed Range (Infinitely Variable.1-200 IPM
Rapid Traverse Rate (X & Y Axis) 600 IPM
Tool Positions. 12 Total
Spindle Bore. 2.44"
Spindle Nose A2-6
Spindle Speed Range 45-4500 RPM
Spindle Horsepower 20 HP
Machine Dimensions 127" x 86"
Machine Height 73"
Machine Weight 10,600 LBS
|
|
| Ad # 15294 | Turning Center 4 - 10 in. chuck |
| early 90 |
Mori Seki |
SL-2 |
Fair |
sold |
Photo /
More Info. |
| —: Have 11-t controller I have the matching SL-4 with a 6-T controller ...bo... |
|
| Ad # 15295 | Turning Center 4 - 10 in. chuck |
| early 90 |
Mori Seki |
SL-4 |
Fair |
sold |
Photo /
More Info. |
| —: Sl-4 MoriSeki with 6-T controller...Units have been disconnected 4 months..... |
|
| Ad # 9232 | Turning Center 4 - 10 in. chuck |
| 97/95 |
mazak |
Super Quick turn 15M mark 2 |
Very Good |
sold |
Photo /
More Info. |
| (2) Mazak in production 8"chuck qt-15n: Std. specs below-please verify
Maximum Swing
20.9" 530 mm
Maximum Swing Over Carriage 15.74" 400 mm
Maximum Cutting Diameter 11.75" 300 mm
Maximum Bar Diameter 2.0"
Maximum Cutting Length 20.78" 51 mm
Spindle Bore 2.4" 61 mm
Spindle Speed 35 - 5,000 RPM
Spindle Horsepower 25HP
Turret Index Time 0.5 sec./step 1.3 sec./6 step
Stroke:
Travel X - Axis
Travel Z - Axis
7.12" 181 mm
21.75" 552 mm
Rapid Traverse X/Z Axis 1180IPM 29,972 mm/m
Tailstock Spindle Center MT #5
8"chuck
tool setter eye
programable tailstock
chip conveyor
rpm -one 3500 other 5000
live tooling
T-plus control
(2) machines available
|
|
| Ad # 10044 | Turning Center 4 - 10 in. chuck |
| 98 |
Haas |
HL-4 |
Very Good |
sold |
Photo /
More Info. |
| 24" swing x 31-40 centers"-- 10"chuck: 36" travel
2-1/2" spindle bore-thru hole
chip conveyor
parts catcher
tool eye
10" chuck
635 CUTTING HOUR ONLY
Std> specs below please verify actual machine...
Capacities:
Swing Over Bed: 24"
Swing Over Cross Slide: 9.5"
Maximum Cutting Diameter: 14.5"
Maximum Cutting Length: 34"
Distance Between Centers: 39"
Travels:
X-Axis: 11.3"
Z-Axis: 34"
Spindle:
10" 3 Jaw HydraulicPower Chuck
Spindle Nose: A2-6
Spindle Bore: 2.5"
Maximum Spindle Speeds: 3,400 rpm
Spindle Drive Motor (continuous / 30 minimum): 20 / 30 Horsepower
Feedrates:
X-Axis Rapid Traverse: 710 ipm
Z-Axis Rapid Traverse: 710 ipm
Tailstock:
Taper: #4 Morse Taper
Travel: 33.5"
Tool Setter
Turret: 12 STATION
Coolant tank and pump
Chip conveyor
General:
Electrical: 208 / 230 Volt, Three Phase, 50 / 60 Hz
Overall Dimensions: 135" x 68" x 76" tall
|
|
| Ad # 10043 | Turning Center 4 - 10 in. chuck |
| 99 |
Haas |
SL30-T |
Very Good |
sold |
Photo /
More Info. |
| 10" chuck---14.5 swing x 39" centers: 30 hp
ridgid tapping
programable tailstock
parts catcher
holds 12 tools
chip auger
floppy drivee
2-1/2 thru hole
Standard specs below-please verify
Swing over front apron: 30" & MANUALS
Swing over cross slide: 14.5"
Bar Capacity: 2.5"
Between Centers: 39"
Maximum Cutting Dia.: 14.5"
Maximum Cutting Length: 34"
Spindle Nose: A2-6
Spindle Top Speed: 3,400 R.P.M.
Spindle Motor: 30H.P. (Vector Drive)
Travels: X-axis 11.30, Z-axis 34"
Turret, Number of Tools: 12
Tail Stock: (MT4): Programmable Hydraulic
On Time: 1210 Hrs. Cutting Time: 387 Hrs.
Options:
Programmable Hyd. Tail Stock -
3.5 Floppy Disk Drive
RS 232 port
1 MB Expanded Memory
Chip Conveyor
|
|
| Ad # 7942 | Turning Center 4 - 10 in. chuck |
| 1966 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
6 position turret
cut-off attachment
Automatic threading attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 11046 | Turning Center 4 - 10 in. chuck |
| 1978 ? |
Hitachi Seiki |
4D-4NE |
Good |
sold |
Photo /
More Info. |
| 10" chuck slant bed lathe: Control: Fanuc System 5T
Swing: 22.8"
Length: 24"
Chuck: 10" dia High Quality Buck Chuck
Spindle Bore: 2-7/8" diameter
Spindle Speeds 20 -3150 RPM
Spindle drive: 15 hp
12 Station Turret
RS232 cable wired into cotrol box to program offline!
All Tooling included with this lathe
All Documents included
|
|
| Ad # 12424 | Turning Center 4 - 10 in. chuck |
| 1980 |
Mori Seiki |
SL-2H |
Good |
sold |
Photo /
More Info. |
| 10" Jaw 3: MORI SEIKI 2-AXIS CNC TURNING CENTER/CHUCKER
(NO TAILSTOCK)
MODEL: SL-2A
SPECIFICATIONS:
SWING OVER BED/FRONT COVER...................
22.4"/15.7"
SWING OVER CARRIAGE/CROSS SLIDE..............
20"/13.7"
STROKE END/ RECOMMEND WORK PIECE DIA. .......
9.4"/7.8"
MAX. LONGITUDINAL TRAVEL.....................
16.1"
PROGRAMMABLE SPINDLE SPEED RANGE.............
35-3500 RPM
HOLE THRU SPINDLE............................
2.2"
APPROX. WEIGHT...............................
8,360 LBS
EQUIPPED WITH:
-YASNAC
-10" 3-JAW HYD. CHUCK
-8 POSITION TURRET |
|
| Ad # 11992 | Turning Center 4 - 10 in. chuck |
| 1980 |
Hardinge |
HNC Super Precision |
Good |
sold |
Photo /
More Info. |
| —: We have had this HNC for 16 years and updated it to a Yasnac controller (fr... |
|
| Ad # 12042 | Turning Center 4 - 10 in. chuck |
| 1980s |
Jones & Lamson |
TNC COMBI 4512 |
Good |
sold |
Photo /
More Info. |
| 10" x 20": Jones & Lamson
Economiser TNC COMBI 4512
Control Fanuc OT
6 Turret Tool Holder
10" swing x 20"
1" 1/8 Spindle Bore |
|
| Ad # 13484 | Turning Center 4 - 10 in. chuck |
| 1980 |
Mazak |
Slant 15 |
Excellent |
sold |
Photo /
More Info. |
| CNC Lathe Mazak Slant 15 : 1980 Mazak Slant 15 CNC Lathe Fanuc 6TA Control
Machine has a serial port to send programs from computer to the machine,
Machine is still quite accurate.
8" Manual chuck
8"Hydraulic chuck
2.2" bore
Grooving tooling
MAX SWING 15"
MAX DIAMETER SHAFT WORK 8 1/4"
MAX BETWEEN CENTERS 42"
SPINDLE BORE 2.2"
SPINDLE SPEED RANGE 15 TO 3000 RPM VARIABLE
TURRET POSITIONS 10
MAIN DRIVE MOTOR 15 HP DC
APPROX WEIGHT 9300 LB
|
|
| Ad # 12043 | Turning Center 4 - 10 in. chuck |
| 1980s |
James & Lamson |
TNC1508 |
Good |
sold |
Photo /
More Info. |
| 8" x 12": James & Lamson
8 Tool Turret
8 inch 3 jaw chuck
Model TNC 1508
Control GN0
Voltage 440/3 phase |
|
| Ad # 11655 | Turning Center 4 - 10 in. chuck |
| 1980 |
HES |
300 |
Very Good |
Sold |
Photo /
More Info. |
| 12" x 27": H.E.S Model 300
12" x 27"
3 Jaw 8" chuck
5000 Rpm
Fanuc GN6 Controll
1" 3/8" Spindle bore
12 Tool Turret |
|
| Ad # 7361 | Turning Center 4 - 10 in. chuck |
| 1981 |
Mori Seiki |
SL-5 |
Good |
Sold |
Photo /
More Info. |
| 1981 Mori Seiki SL-5 CNC Turning Center: 24" Swing
12 Position Turret
43" Centers
Tailstock
10" Chuck
3" Thru Hole
Full Machine Specifications
Swing Over Bed 24.4" 24.4"
Between Centers 43.3"
Chuck Size 10"
Max Machining Diameter 14"
Spindle Nose A2-8
Hole Thru Spindle 3.03"
Spindle Center Height From Floor 45.3"
Spindle Speed 3000 RPM
Tailstock Taper MT-4
Turret Stations 12
Spindle Motor 40 HP |
|
| Ad # 4326 | Turning Center 4 - 10 in. chuck |
| 1981 |
Ikegai |
FX25N Chucker(no tailstock) |
Fair |
Sold |
Photo /
More Info. |
| 10" Ikegai Chucker: Fanuc 6TB Control
10" Kitagawa Power chuck with thru hole
Approximate specifications:
2.5" Spindle hole
HP 15
Coolant
2000 RPM |
|
| Ad # 8601 | Turning Center 4 - 10 in. chuck |
| 1982 |
Mori-Seiki |
SL3 |
Good |
Sold |
Photo /
More Info. |
| —: 12 tool turret
10" 3 jaw chuck
16C collet chuck
RS232 port
Yasnac 200G2 control
Factory Specs: please verify below:
Swing over bed Highest Spindle Speed (RPM): 3501 - 4000
Make: Mori Seiki
Distance Between Centers: 21'' - 30''
SWING OVER CARR./CROSS SLIDE 7.8"
DISTANCE BETWEEN CENTERS 22"
MAX LONGITUDINAL TRAVEL 22"
PROGRAMMABLE SPINDLE SPEED RANGE 4000 RPM
SPINDLE NOSE A2-6
HOLE THRU SPINDLE 2.2"
TAILSTOCK QUILL DIAMETER 3.34"
TAILSTOCK QUILL TAPER TAILSTOCK QUILL STROKE
CARRIAGE/BED SLANT 45 DEG.
CURVIC COUPLING DIAMETER 8.26"
ELECTRICS 3/60/220
MAIN MOTOR 20 HP
WEIGHT 9350 LBS
|
|
| Ad # 13270 | Turning Center 4 - 10 in. chuck |
| 1983 |
Mazak |
Quick Turn 20 Univ |
Good |
sold |
Photo /
More Info. |
| 10" chuck: 1993 Mazak QT 20 univ-slant bed lathe
Manufacturer: Mazak
Model: Quick Turn-20
Control: Mazatrol T-1
Condition:runs good
Under Power: yes
10" 3 jaw chuck
skimmer
Capacity:
Swing: 17.32"
Spindle:
Spindle Speeds: 50 - 5000 RPM
Spindle Bore: 2.75"
Spindle Nose: A2-6
Main Motor: 15/20 HP
Turret:
Number of Positions: 8
X-Axis Travel: 7.125"
Z-Axis Travel: 42"
programmable tailstock
no chip conv
Dimensions:
Floor Space: 69" x 105"
Height: 73.1"
Weight: 9370 lbs
machine runs good can demo under power |
|
| Ad # 1496 | Turning Center 4 - 10 in. chuck |
| 1983 |
Hardinge |
Super Slant SB-GN |
Good |
sold |
Photo /
More Info. |
| Hardinge Twin Turret 6" Lathe: twin 8 Station Turrets (4-axis for speed)
6" chucker
Swing Over Bed 22"
DBC 30"
Spindle 15 hp
Control Fanuc/GE GN 6TC
RS232
Twin turret machine..
INCLUDES:
Full Documentation
6" 3-Jaw chuck
Collet Chuck that accepts either 16C or 5C collets
Misc collets
Actuator for above chucks
Chip Conveyor
Hardinge Bar Feeder
|
|
| Ad # 12160 | Turning Center 4 - 10 in. chuck |
| 1983 |
Mazak |
QT-10 Universal |
Good |
sold |
Photo /
More Info. |
| 10" x 20": Mazak QT 10 Universal
Maztrol T-1
8 Tool Holders
Chip Conveor
3 Jaw 8" Chuck |
|
| Ad # 2512 | Turning Center 4 - 10 in. chuck |
| 1983 |
LEBLOND |
BARON |
Very Good |
Sold |
Photo /
More Info. |
| LEBLOND MAKINO MODEL BARON 40 CNC: Control: GE 1050 HLX
Swing: 23"
Max. Turning Dia.: 13.5", Using 2" Dia. Boring Bars
Max. Center Distance: 30"
X Axis Travel: 15.75"
Z Axis Travel: 32"
Spindle Speeds: 25-2500 RPM
Hole Through Spindle: 3.062"
Turret Configuration: 18 Index Positions, 6 ID, 10OD
Motor HP: 40HP 15 Min, 30HP Continuous
Spindle Nose/Taper: A2-8
60 degree Slant Bed Design
12" 3 Jaw Chuck
Chip Conveyor
|
|
| Ad # 13653 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
SB 3 GN Superslant |
Good |
sold |
Photo /
More Info. |
| 8" x 16": Hardinge SB 3 GN Superslant
Year: 1984
Control: Fanuc GN6
8 Tool Turret
8 Tool End Working Turret (tail stock)
13 HP
Spindle Bore: 1 7/8"
4000 RPM
Bar Feeder 20ft (omnibar 45FS)
rigging/loading fee approx: $1500
2 machines just alike available-one running other needs new boards-will sell for parts additional $3500.00 |
|
| Ad # 6378 | Turning Center 4 - 10 in. chuck |
| 1984 |
Mori-Seiki |
SL3H |
Very Good |
Sold |
Photo /
More Info. |
| 16" x 24" Mori Seiki SL3H CNC Turning Center: Mori-Seiki Model SL3H cnc turning center with 3T Fanuc Control,
2.625 spindle bore,
Max. Swing - 22.4"
Max. Cross Travel - 6.3"
Standard Workpiece Dia. - 7.87"
Max Work Length - 21.6"
Spindle Speed 37-4000 RPM
Spindle Nose - A2-6
Spindle Bore - 3.03"
Turret type - 12 position
Spindle Motor - 14-3/4/20 HP
Tailstock Quill Dia. - 3.35"
Tailstock Quill Taper - MT #3
Tailstock Quill Stroke - 3.15"
Equipped with:
Fanuc 3T CNC Control
RS-232 Port
12 Position Turret
10" 3-Jaw Chuck
Tailstock
Hydraulic Pump & Tank
Coolant System
All Available Manuals
Includes Misc Tooling:
6 O.D., 6 I.D., tool blocks,
|
|
| Ad # 5021 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
SR 2-AB |
Good |
Sold |
Photo /
More Info. |
| Hardinge Superslant CNC Lathe: Hydraulic tail stock
Collett chuck
Parts catcher
Chip conveyers
ANSI A2-5" spindle configuration
Hole through spindle 1-7/8"
16C Collett capacity 1-5/8"
Chucking capacity 8",not included,has collet chuck
Spindle speed range 40 to 4000rpm
D.C. spindle drive 13.4hp
Max. swing dia. 19"
Max. threading dia. 8"
Max. threading length 16"
Max. turning dia. 8"
8 station upper turret
Square tool size 3/4"
Round tool dia. 1" Max. Z-axis travel 16-11/32"
Max. X-axis travel(Upper turret) 4-1/2"
Max. X-&Z-axis feedrate(Traverse rate) 200ipm
MT #3 Center
Spindle face to tailstock 20"
Max. tailstock travel 15"
Rapid traverse & return rate 200ipm
|
|
| Ad # 3264 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
CHNC |
Fair |
sold |
Photo /
More Info. |
| Hardinge CHNC Lathe chucker turret lathe: Control: AB Series 7300,7370
3-8Kw motors
8 Position Turret on tailtock slide
Cut off Tool attachment
bar capacity: 1-3/4"
14" Swing over ways
|
|
| Ad # 7304 | Turning Center 4 - 10 in. chuck |
| 1984 |
OKUMA |
LB-10 |
Very Good |
Sold |
Photo /
More Info. |
| OKUMA LB 10 CNC LATHE: NC LATHE,OKUMA LB10,
OSP5000L CONTROL,
COLLET CHUCK,
12 STATION TURRET,
HYDRAULIC TAILSTOCK,
A2-5 SPINDLE NOSE ,
MAX. BAR STOCK CAPACITY: 1.5 INCH,
BETWEEN CENTERS: 10",
CHUCK CAPACITY: 6" ,
SPINDLE SPEEDS: 60-6000 RPM ,
Foot Switches
|
|
| Ad # 5902 | Turning Center 4 - 10 in. chuck |
| 1984/5 |
Taiyo Seiki |
2NB |
Good |
sold |
No Photo /
More Info. |
| 8" Chuck Taiyo Seiki CNC Lathe: 200mm chuck with Fanuc control 10T |
|
| Ad # 8978 | Turning Center 4 - 10 in. chuck |
| 1984 |
Mori-Seiki |
SL-2H |
Good |
Sold |
Photo /
More Info. |
| No chuck: Hyd. Turrent 10 tool stations .
Yasnac LX1 Control.
Hole thru Spindle 3.03" .
Spindle nose A-6
Spindle Speed 25-2500 RPM .
Max travel X axis 6.3" Max Travel Z axis16.1" .
Riken Hyd. with draw bar tube no chuck or collet on it.
Chip Conveyor . |
|
| Ad # 9565 | Turning Center 4 - 10 in. chuck |
| 1984 |
OKUMA |
LB12 |
Very Good |
SOLD |
Photo /
More Info. |
| 8" chuck: Control :OSP 500L
Number of Axes :2
Cutting Diameter :7.87"
Between centers :19.69""
Bar / Bore :1.700"
Tool Stations :8
Spindle Motor Power :7.5 kw
Spindle Speed :3500 rpm |
|
| Ad # 5807 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
Super Slant (Three Axis) |
Good |
Sold |
No Photo /
More Info. |
| Hardinge Superslant 3axis Lathe-6" chuck: 1984 Hardinge Super Slant Lathe with GN/Fanuc 6 CNC Control.
Options Include:
chip conveyor,
1-5/8" hardinge bar feeder,
6" powerhold 3 jaw chuck with hard & soft jaws,
16c collet system (with collets),
16c to 5c collet adaptor,
16c collet tray,
misc other;
bolt on tool holders,
All manuals (operator, programer, repair),
complete set of blueprints,
MANY MECHANICAL AND ELECTRONIC SPARE PARTS |
|
| Ad # 2949 | Turning Center 4 - 10 in. chuck |
| 1984 |
GILDEMEISTER |
MD3S |
Good |
Sold |
Photo /
More Info. |
| MD3S GILDEMEISTER 2 AXIS CNC SLANT BED LATHE: Center Distance: 23.62"
Max.Swing Over Bed: 22.04"
Max. Swing Over Cross Slide:
Spindle Bore: 2.44"
Spindle Nose: ASA Direct Bolt On Type Size 6
Max. Driving Power: 40 / 36 KW ( approx. 50 HP)
Spindle Speeds: 100 to 4000 RPM
Spindle Speeds Continuously Programmable for Constant Cutting Speed
Feed Rates: 0.001" to 500" Per Revolution
Rapid Traverse Rate: 10 Meters Per Minute
12 Tool Tool Turret (6 positions for boring tools & 6 positions for turning tools)
Tool Shank Diameter 1.57" with Pinion Rack (Trudex Type )
Tailstock Quill Stroke 4.72"
Tailstock Taper #5 Morse
Tailstock Quill Hydraulic Force with Adjustable Pressure
|
|
| Ad # 12675 | Turning Center 4 - 10 in. chuck |
| 1984 |
Pratt&Whitney |
TurnMate |
Good |
sold |
Photo /
More Info. |
| 6" chuck: Machine in excellent condition for it's age
6"-3 jaw air operated
thru hole 1-3/4"
swing: 12"
120 hrs control time
chucker
rigging/loading fee:$500.00
fanuc 6T control
sliding headstock |
|
| Ad # 7051 | Turning Center 4 - 10 in. chuck |
| 1985 |
Dianichi |
MG-63 |
Good |
Sold |
Photo /
More Info. |
| One (1) 1985 Dianichi MG-63: One (1) 1985 Dianichi MG-63
Swing Over Bed 24.822"
Swing Over Carriage 13.79"
Bed Width 18.912"
Formation of Main Spindle Edge JIS A1-11
Diameter of Front Bearing For Main Spindle 5.516"
Diameter of Main Spindle Through Hole 3.349"
Diameter of Main Spindle Tapered Hole (1/10 metric taper) No 100
Diameter of Tailstock Spindle 3.546"
Size of Center MT # 5
Width of Crossslide 11.032"
Tool Rest Type Automatic Square Tool Rest
Size to Tool 0.985" x 0.985"
Max Movable Distance of X Axis 12.608"
Max Movable Distance of Tailstock Spindle 5.91"
10" Chuck |
|
| Ad # 11664 | Turning Center 4 - 10 in. chuck |
| 1985 |
Mazak |
Quick Turn 20N |
Good |
sold |
Photo /
More Info. |
| Mazak Quick Turn 20N 2 Axis CNC Lathe: Item #1002 Mazak Quick Turn 20N 2 Axis CNC Lathe
max Swing: 20.8"
Max. Cutting Diameter: 12.6"
Max. Cutting Length: 39"
Spindle Nose: A2-8"
Spindle Bore: 3.15"
Max Bar Capacity: 2.50"
Spindle Speeds: 3,000 RPM
Turret Type: 8 Position
Rapid Traverse Rate: 472 IPM
Main Motor: 30 HP
Equipped With:
Mazatrol Cam T-2 CNC Control
8" 3-Jaw Hydraulic Chuck
Tailstock
Tool Presetter
Jorgenson Chip Conveyor
Year Mfg. 1985 Item #1002
**SPECIFICATIONS SUBJECT TO VERIFICATION**
Rigging and Hauling Not Included
|
|
| Ad # 14542 | Turning Center 4 - 10 in. chuck |
| 1985 |
Mori Seiki |
SL-3H with Fanuc 10TF Control |
Good |
sold |
Photo /
More Info. |
| Mori Seiki SL-3H with Fanuc 10TF Conversational Control: Mori Seiki SL-3H with Fanuc 10TF Control
Date of Manufacture is around 1985.
Chuck Size = 10"
Maximum Swing Over Bed = 22.4"
Standard Workpiece Diameter = 7.87"
Maximum Cutting Length = 21.6"
Bar Capacity = 2.5"
X-Axis Travel = 6.3"
Z-Axis Travel = 22"
Spindle Motor = 20 Hp
Spindle Speed = 37 - 4,000 RPM
Spindle Nose / Spindle Bore = A2 - 6" /
3.03"
Turret Type = 12 Position Turret
Tailstock Quill Diam./Taper = 3.35" / MT
#
3
Tailstock Spindle Travel = 3.1"
Machine Dimensions = 73"x 50"x 68"
Machine Weight = 9,240 lbs.
Equipped with:
10" Hydraulic Chuck
Chip Conveyor
Tailstock
RS 232 Port Interface
220V 3 Phase |
|
| Ad # 7665 | Turning Center 4 - 10 in. chuck |
| 1985 |
MAZAK |
QT-10N |
Good |
Sold |
Photo /
More Info. |
| —: 8 tool turret, Tool eye, programmable tailstock,Barfeed ready, Travel X 11"... |
|
| Ad # 14473 | Turning Center 4 - 10 in. chuck |
| 1986 |
Mazak |
QT 8 |
Good |
sold |
Photo /
More Info. |
| —: Mazak QT-8 CNC Lathe
T-2 Control
1986
6" chuck
tailstock
tool eye
Great machine that will hold +/-.0005 with out
a problem. I need to make room for other
equipment. |
|
| Ad # 5905 | Turning Center 4 - 10 in. chuck |
| 1986 |
MAZAK |
10N-ATC-M/C |
Good |
Sold |
Photo /
More Info. |
| MAZAK Quick Turn 10N-ATC-M/C CNC Slant Bed turning/milling center: MAZAK Quick Turn 10N-ATC-M/C CNC Slant Bed turning/milling center
Max. swing 17.3”
Max. cutting diameter 10”
Max. cutting length 19.69”
Spindle nose A2-6”
Spindle bore 2.2”
Tailstock quill diameter 3.15”
Tailstock center size No.40 M.T.
Tailstock quill travel 5.1”
Spindle speed range 50-5000 RPM
EQUIPPED WITH:
16 Station magazine tool changer
“C” axis
Programmable tailstock
Tool eye
8” Dia. Howa hydraulic 3-jaw power chuck
with set of soft jaws and remote foot pedal
(5) block type holders
(5) round type holders
(6) live tools
(1) live right angle tool
Misc. cutters
Flood coolant
15 H.P. Main drive motor
Mazatrol CAM T-3-B CNC control
with color CRT and graphics
|
|
| Ad # 4027 | Turning Center 4 - 10 in. chuck |
| 1986 |
Hardinge |
CHNC-1 |
Good |
Sold |
Photo /
More Info. |
| HARDINGE HIGH SPEED PRECISION CHUCKER: 16-C Collet Chuck
Spindle Power: 7.5 hp
Spindle Bore: 1 5/8"
Spindle Speed: 0 - 5,000 rpm
Chuck With Hardinge 16C Collet |
|
| Ad # 4370 | Turning Center 4 - 10 in. chuck |
| 1986 |
Mazak |
Quick Turn - 10N |
Good |
sold |
Photo /
More Info. |
| MAZAK 2-AXIS LATHE: Maximum Swing.....................17.3 In
Standard Cutting Diameter.........6 In
Maximum Cutting Diameter..........10 In
Cutting Length....................19.69 In
Spindle Bore Diameter.............2.2 In
Spindle Nose......................A2-6
Spindle Speed.....................36 - 3600 RPM
Number of Turret Positions........8
Turret Type.......................Octagonal Drum
Index Coupling Diameter...........8.26 In
Clamping Force....................7700 Lbs.
X Axis ...........................5.9 In
Z Axis Stroke.....................21 In
Rapid Traverse Rates
X-Axis............................390 IPM
Z-Axis............................590 IPM
Bed Width.........................13.58 In
Cross Slide Width.................10.04 In
Tailstock Quill Diameter..........3.15 In
Tailstock Center..................MT # 4
Stroke of Tailstock Quill.........5.1 In
Stroke of Tailstock Body..........21.65 In
Main Motor ( Cont./ 30 Min. ).....AC 15 HP/ 20 HP |
|
| Ad # 11318 | Turning Center 4 - 10 in. chuck |
| 1986 |
Mazak |
Quick Turn 10N Universal |
Good |
sold |
Photo /
More Info. |
| 8" chuck : 1986 Mazak Quick Turn 10N Universal CNC Lathe
includes: Parts catcher-removed temp-can easily be attached-was in the way
touch probe-tool offsets
chip conveyor
8" hyd chuck-3 jaw-has some soft jaws
bar puller included in hilder slot
12 station turret
Programmable tailstock & (Quill programmable feature) but needs board repaired for programmable quill to function correctly-$500.00
3600 RPM max
Control: Mazatrol T-2 conversational or G code
Std Specs Below-please verify--
RS32 Port
Description Spec Values
Capacity: Swing / Swing Over Cross Slide 17.6" / 9.1"
Maximum Turning Diameter / Maximum Turning Length 6.29" / 17.75"
Distance Between Centers 20"
Spindle: Spindle Speeds 60 - 3,600 RPM
Spindle Bore / Bar Capacity / Nose 2.2" / 1.55" / A2-5
Main Motor 20 HP
Turret: Number of Positions 12 Stations
X-Axis Travel 6.5"
Z-Axis Travel 21.4"
Tailstock: Stroke of Body / Quill 15.8" / 3.1"
Quill Diameter / Taper 2.17" / MT #4
Rapids: Rapid Traverse (X / Z ) 787 / 479 IPM
Dimensions: Floor Space (L x W x H) 108" x 65" x 75"
Equipped With :
Programmable Hydraulic Tailstock and Quill
Manuals
Chip conveyor
Interfaced for Bar Feeder
Parts Catcher
Some Tooling included
machine runs good and holds good tolerances |
|
| Ad # 6878 | Turning Center 4 - 10 in. chuck |
| 1987 |
OKUMA |
LB-15 |
Very Good |
Sold |
Photo /
More Info. |
| OKUMA CNC LATHE, MODEL LB-15: 1 PREOWNED OKUMA CNC LATHE, MODEL LB-15
SPECIFICATIONS
SWING OVER BED ------------------------------ 15.75"
MAX. TURNING DIA. --------------------------- 9.84"
MAX. WORK LENGTH ---------------------------- 19.69"
(CHUCK WORK 9.06")
SPINDLE BORE -------------------------------- 2.20"
SPINDLE NOSE -------------------------------- A-2-6
SPINDLE SPEEDS ------------------------------ 75-4, 200 RPM
(2 RANGES, INFININTELY VARIABLE)
Z-AXIS TRAVEL ------------------------------- 20.47"
X-AXIS TRAVEL ------------------------------- 6.89"
CUTTING FEED RATES -------------------------- .0001-40.000 IPM
RAPID TRAVERSE RATE ------------------------- 472 IPM
TAILSTOCK QUILL STROKE ---------------------- 4.72"
TAILSTOCK CENTER TAPER ---------------------- #5 MT
SPINDLE MOTOR (30 MIN./CONT.) --------------- 15/10 HP
HYDRAULIC TANK CAP. ------------------------- 10 GAL.
EQUIPPED WITH
OSP 5000L-G CONTROL |
|
| Ad # 6876 | Turning Center 4 - 10 in. chuck |
| 1987 |
OKUMA |
LB-12 |
Good |
Sold |
Photo /
More Info. |
| OKUMA LB-12 CNC LATHE WITH CHIP CONVEYOR: 1 PREOWNED OKUMA LB-12 CNC LATHE WITH CHIP CONVEYOR
SPECIFICATIONS
NOMINAL SIZE ----------------------------- 200 x 350
NUMBER OF AXES --------------------------- 2
SWING OVER BED --------------------------- 13.78"
MAX. TURNING DIA. ------------------------ 7.87" x 13.78"
BORE DIA. -------------------------------- 2.20"
SPINDLE NOSE ----------------------------- ASA A2-6
INTERNAL TAPER --------------------------- MT #6
NUMBER OF SPINDLE SPEEDS ----------------- INFINITELY VARIABLE
Z-AXIS TRAVEL ---------------------------- 14.57"
X-AXIS TRAVEL ---------------------------- 4.13" + 1.57"
CUTTING FEEDRATE ------------------------- .0001-40.000 IPR
RAPID TRAVERSE SPEED --------------------- 472 IPM
SIZE OF ID/OD TURNING TOOL --------------- 1"x1",1-1/2"
BED -------------------------------------- 35.43" x 15.35"
DIA. OF QUILL ---------------------------- 3.15"
TAPER OF CENTER -------------------------- MT #4
QUILL STROKE ----------------------------- 3.94"
MOTOR ------------------------------------ 10/7.5HP
EQUIPPED WITH
CHIP CONVEYOR, TURBO MODEL 6275-812
COOLANT THRU TOOL HOLDERS
8 STAION TOOL TURRET
OKUMA OSP5000L-G CONTROL |
|
| Ad # 7049 | Turning Center 4 - 10 in. chuck |
| 1987 |
DAEWOO |
Puma 6 |
Good |
Sold |
Photo /
More Info. |
| One (1) 1987 DAEWOO Puma 6: One (1) 1987 DAEWOO Puma 6
Swing Over Bed 20"
Swing Over Carriage 12.2"
Recom Turing Dia/Length 6.5/14.6
Max Turning Dia 14.6"
Max Bar Working Dia 1.58"
Chuck Size 6.5"
Spindle Nose/Bore A2 #5/1.8
Bearing Dia front/rear 3.1/2.8
Spindle Speed 60-6000 RPM
Spindle Motor Cont/ 30 Min 11/15 HP
Quill Dia/ Stroke 2.6/4.0
Taper of Center MT # 3
Travel Distance X/Z 7.9/15.0
Electric Power Supply 30 KVA
Fanuc 6T
30 deg Slant Design
Hydraulic Tlsk
10 Station Bolt on turret
6" Kitagawa 3 Jaw Chuck
Powerful 15 HP (11 Kw) AC Spindle Motor
Fast 945 IPM (24 m/min) Rapid Traverse
Rigid One Piece Meehanite Cast Iron Bed
Hardened and Ground Box Way Construction
Precision 6000 RPM Cartridge Spindle
Non Stop Bidirectional Turret Indexing
Double end Pretensioned Ball Screw Support
State of the Art 32 Bit Fanuc Controller |
|
| Ad # 11937 | Turning Center 4 - 10 in. chuck |
| 1988 |
Cincinnati Milicron |
Cinturn 8C Series 1208 AT |
Excellent |
sold |
Photo /
More Info. |
| Travels X 8" x Z 40": Cincinnati Milacron Cinturn 8C Series 1208
Model AT CNC Lathe
Mfg. Date, 1988
Acramatic 950 CNC Controller
12 position turret
Travels X 8" x Z 40"
8" Chuck
Spindle Speed, 28- 3000 rpm
15 hp spindle
Hydraulic Tailstock
Jorgensen chip conveyor
Coolant pump and tank
609 Hours on machine |
|
| Ad # 6441 | Turning Center 4 - 10 in. chuck |
| 1988 |
MIYANO |
JNC-45 |
Excellent |
Sold |
Photo /
More Info. |
| JNC-45 MIYANO 2-axes Slant Bed CNC Turning Center with Hyd bar-feed: JNC-45 MIYANO 2-axes Slant Bed CNC Turning Center with Hydraulic bar-feed
Max. swing over turret face 18 ½”
Max. machining length 18 ½”
Max. machining capacity 8”
Spindle nose A2-6
Inner diameter of draw tube 1.81”
Infinitely variable spindle speeds 20-4000 RPM
Max. indexing clearance 21 5/8”
X-axis travel 7 1/8”
Z-axis travel 18 ½”
Tailstock max. stroke 13 ¾”
Tailstock sleeve size No.4 M.T.
Max. bar capacity (520 collet pad)
Round 1 ¾”
Hex 1 ½”
Square 1 3/16”
EQUIPPED WITH:
Power collet chuck
10-Station turret
Automatic parts catcher
M0-4.6 SMW Omnibar hydraulic bar-feed with (3) tubes, S/N 151
Tailstock
Foot pedal for chuck control
Flood coolant system
Turret tool holders and tool blocks
OT Fanuc control w/ RS232 port
20 H.P. Spindle drive |
|
| Ad # 6040 | Turning Center 4 - 10 in. chuck |
| 1988 |
Churchill |
HC3/15 |
Good |
Sold |
Photo /
More Info. |
| 2.5" bore , 24" centers: Maximum turn diameter 11.8in, travel x-axis 6in z-axis 6in, spindle nose A2... |
|
| Ad # 5691 | Turning Center 4 - 10 in. chuck |
| 1988 |
Mazak |
QT25-T-2controller |
Good |
sold |
No Photo /
More Info. |
| Mazak QT-25: QT-25 with T-2 conversational controller with bar feeder
10" hydraulic chuck also collet chuck lots of collets & tool holders machine has 16 position turret, tooleye, tailstock, 40" between centers, 2 9/16"sindle bore lots of soft jaws, cassette program transferunit Machine is working & under power now selling due to bought new one no room in shop |
|
| Ad # 6936 | Turning Center 4 - 10 in. chuck |
| 1988 |
Mazak |
"QUICK TURN" 8 |
Very Good |
Sold |
Photo /
More Info. |
| MAZAK MODEL "QUICK TURN" 8 CNC LATHE: MAZAK MODEL "QUICK TURN" 8 CNC LATHE
Maximum Swing: 11.80"
Turning Diameter: 6.30" (Maximum)
3.94" (Standard)
Distance Spindle Nose to Turret Face: 3.94" - 15.35"
Maximum Work Length: 9.84"
Maximum Work Weight: 66 Lbs
Spindle Speed: 45 - 4500 RPM
Spindle Nose: JIS A2-5"
Through Spindle Hole Diameter: 1.97"
Spindle HP: 7.5/5.0
Turret Size: 9.45"
Number of Tools: 8
X-Axis Travel: 3.94"
Z-Axis Travel: 11.42"
Tailstock Travel: 12.80"
Tailstock Quill Diameter: 1.97"
Tailstock Quill Stroke: 2.95"
EQUIPPED WITH:
Mazatrol Cam T-2 CNC Control
(6") Hydraulic Power Chuck
Tool Eye
Automatic Lube System
AC Main Spindle Motor |
|
| Ad # 9007 | Turning Center 4 - 10 in. chuck |
| 1988? |
Mori Seiki |
SL-2H |
Fair |
sold |
Photo /
More Info. |
| 2.5": collet chuck, tailstock,yasnac contol,used for production 1 month ago, bar ... |
|
| Ad # 12333 | Turning Center 4 - 10 in. chuck |
| 1989 |
Mazak |
QT 10N ATC M/C |
Good |
sold |
Photo /
More Info. |
| 10" x 20": Mazak QT 10N ATC M/C
Mazatrol Cam T-3
3 Jaw 8" Chuck
Tool Setter
Power Tail Stock/ Power Quill
Live tooling |
|
| Ad # 6276 | Turning Center 4 - 10 in. chuck |
| 1989 |
Victor |
TNS-2 |
Fair |
sold |
No Photo /
More Info. |
| 10" chuck with 12 station turret : — |
|
| Ad # 6937 | Turning Center 4 - 10 in. chuck |
| 1989 |
NAKAMURA-TOME |
TMC 30 |
Very Good |
Sold |
Photo /
More Info. |
| NAKAMURA-TOME MODEL TMC 30 CNC TURNING CENTER: NAKAMURA-TOME MODEL TMC 30 CNC TURNING CENTER
Tailstock
10 Station Turret
Fanuc 11T Control |
|
| Ad # 8853 | Turning Center 4 - 10 in. chuck |
| 1989 |
Tsugami |
FA45 |
Good |
sold |
Photo /
More Info. |
| 8" Chuck: Collet Capacity 1.5"
Chuck Size 8" (optional)
Chuckable Diameter X1: 160 MM
Z1: 400 MM
Y: +/- 50 MM
X2: 110 MM
Z2: 150 MM
Rapid Traverse Speeds X1 & X2: 8m/min
Z1 & Z2: 10m/min
Y: 6m/min
C: 20 RPM
Main Spindle Speeds (High Speed Version ) 50-
5000 RPM
(Low Speed Version) 40-3,550 RPM
Maximum Cutting Torque (High Speed Version)
8.77 kgf-m/1,666 RPM
(Low Speed Version) 12.33 kgf-m/1,183 RPM
Tool Sizes (For OD Machining) 20 x115mm
For ID Machining) 25 mm (diameter)
Motors (Main Spindle) 15/11 kw
(Tool Spindles) 3.7/2.2 kw
(Hydraulic System) 1.5 kw
(Coolant System) 370 W
NC Specifications:
Type of NC System Fanuc Series OT Model A (2
Units)
No. of Controlles Axes 6 (X1, X2, Y, Z1, Z2 & C)
Minimum setting increments for all axes except C
Axis
(Diametrical Designation for X Axis) 0.001 mm
For C Axis 0.001 deg
Tape Codes EIA RS-244 & ISP 840
(Automatic Discrimination)
Rapid Traverse Speed X Axis 8m/min
Y Axis 6m/min
Z Axis 10m/min
Caxis 7200deg/min(20 RPM)
Equipped With Fanuc OT CNC Controls
Iemca Magazine Load Bar Feeder TAL65/12 AML
Splash Guards
Coolant
Chip Conveyor, Sub Spindle, Transformer
|
|
| Ad # 12906 | Turning Center 4 - 10 in. chuck |
| 1989 |
Miyano |
GN-4 |
Good |
sold |
Photo /
More Info. |
| 4" Chuck: Miyano GN-4
Fanuc OT Control
|
|
| Ad # 12524 | Turning Center 4 - 10 in. chuck |
| 1989? |
Takisawa |
TS-15 |
Good |
sold |
Photo /
More Info. |
| 8" chuck: Takisawa Lathe
TS-15
10 Tool Holders
Chuck Size:8" / 203.2 mm#
Axis:2
RPM:5000 rpm
Turning Dia:9.370 " / 238mm
Swing:17.717 " / 450mm
Centers:20" / 508mm
Control:Fanuc 6T |
|
| Ad # 8832 | Turning Center 4 - 10 in. chuck |
| 1989 |
Mazak |
QT10U |
Good |
Sold |
Photo /
More Info. |
| 8" Chuck: Swing Over Bed 18"
Maximum Cutting Diameter 11.5"
Maximum Diameter Bar 1.875"
Chuck Size 8" Hydraulic
X Axis Travel 6.875"
Z Axis Travel 19"
Rapid Traverse X/Z 707/945 IPM
Spindle Nose A2-6"
Spindle Bore 2.44"
Spindle Speed 30-4000 RPM
Spindle Motor 15 HP
Spindle Torque 188 ft/lbs
Turret Type 8 Pso Drum
Equipped With Conversational Programming
Color Graphics
Automatic Tool Eye
8" 3 Jaw Hyd chuck
All Available Manuals/Tools
|
|
| Ad # 7343 | Turning Center 4 - 10 in. chuck |
| 1989 |
Hitachi Seiki |
HT 25G |
Good |
Sold |
Photo /
More Info. |
| 1989 Hitachi Seiki HT 25G CNC Turning Center: 24.4 Swing
24 Centers
2.5 Bar Capacity
10" 3 Jaw chuck
chip Conveyor
Full Machine Specifications
10" 3 Jaw Chuck
Chip Conveyor
Swing 24.4
Centers 24
Bar Capacity 2.5 |
|
| Ad # 13314 | Turning Center 4 - 10 in. chuck |
| 1989 |
Okuma |
LB 15 |
Good |
sold |
Photo /
More Info. |
| 10" chuck-big bore 2.5": Okuma LB 15
3 Jaw 10" Chuck
Control OSP5000-L-G
2" 1/2 Spindle Bore
12 Tool Changer
Hydraulic Tail stock
Swing over bed: 15.75"
Maximum turning diameter: 9.84"
Maximum work length: 9.06"
runs good , no issues
loading/rigging fee $1200.00
|
|
| Ad # 14175 | Turning Center 4 - 10 in. chuck |
| 1990 |
Miyano |
LE-31 |
Excellent |
sold |
Photo /
More Info. |
| —: Miyano LE-31 2-Axis CNC Turning Center; (1990);
Kitagwa 10" Hydraulic Chuck
Max Swing over Bed 17.75",
Max Turning Diameter 10",
Max Turn Length 15.75",
10 Station Turret,
Spindle Through Hole 2.5",
Spindle Speeds 3,000 Max,
Fanuc OT CNC Control,
40 HP Drive |
|
current group
groups previously viewed
groups not yet viewed
