Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14015 | Combination (teach lathe) CNC / Manual |
|
Chevalier |
18" x 40" |
Good |
Sold |
Photo /
More Info. |
18" x 40": Chevalier cnc/manual teach lathe
18" swing over bed, 14" over cross slide
8" 3 jaw chuck
control: Anilam 1200TC vers: 6.08A software
RPM: 10-2300
Spindle bore: 2-1/2"
QC toolpost
machine on time hrs:5490
note: have tailstock & steady rest not shown |
|
Ad # 13055 | Combination (teach lathe) CNC / Manual |
|
American |
|
Good |
sold |
Photo /
More Info. |
26"swing x 118" centers:
AMERICAN LATHE
SWING:26" OVER WAYS, 15" SWING OR CRADDLE
BETWEEN CTRS: 118"
QUICK CHANGE GEARED HEAD
POWER FEED SADDLE
THREAD CHASING DIAL
(2) CHUCKS: 18", 4 JAW and a 15", 3 JAW
THRU HOLE: 2"
STEADY REST
CHIP PAN BED
FILTERS
LUBE SYSTEM
SPLASH ENCLOSURE
TRANSFORMER
MANUAL MACHINE RETRIFITTED WITH AUTO CON DYNAPATH DELTA 2-AXIS CNC MOTORS AND CONTROLS |
|
Ad # 14049 | Combination (teach lathe) CNC / Manual |
|
Bridgeport |
Romi EZ Path |
Good |
sold |
Photo /
More Info. |
16.5" x 40": Brideport EZ Path
EMI Controler And DOM
16.5" swing x 40"
Dorian Turret Included
Swing Over Bed:16.5"
Swing Over Cross Slide:8"
Distance Between Centers:40"
Height Of Centers:8"
Hole Thru Spindle:2"
Spindle Speeds (24):37.5 - 3,000 RPM
Spindle Nose:A2 - 5
Bed Width:12"
Bed Height:13-5/32"
Rapid Traverse Rate X/Z Axis:250"/Min.
Spindle Taper:1°26'
Quill Bore Taper MT#:MT#4
Quill Diameter mm(in.):2"
Quill Travel mm(in.):6.3"
Horsepower:8 H.P.
|
|
Ad # 14622 | Combination (teach lathe) CNC / Manual |
9/2008 |
Haas |
TL3B |
Good |
sold |
Photo /
More Info. |
25" chuck: 2008 Haas TL3B cnc/manual lathe-"teach lathe"
25" 3 jaw chuck
32" swing over ways,19" over cross slide
spindle bore: 8.5"
QC tool post
30HP spindle motor
std specs below-please verify
Specifications:
Chuck Size :25”
Distance Between Centers : 60”
Max. Cutting Diameter :30”
Max. Cutting Length : 60”
Swing Over Front Apron : 30”
Swing Over Cross Slide : 18.5”
Spindle Bore :8.5”
Spindle Nose: A2-15
Spindle Speed : 650 RPM
Spindle Motor :30 HP
X-Axis :16”
Z-Axis : 60”
X-Axis Rapids :75 IPM
Z-Axis Rapids :150 IPM
Machine Dimensions (LxWxH) :147” x 97” x 79”
Machine Weight :9,624 lbs.
Equipped With:
Manual Tailstock
25” 3-Jaw Manual Chuck
Coolant Pump Kit
|
|
Ad # 14591 | Combination (teach lathe) CNC / Manual |
200? |
Chevalier |
FCL-1840A |
Good |
sold |
Photo /
More Info. |
teach lathe _ 10" chuck: Chevalier FCL-1840A smart lathe plus
Chevalier cnc lathe
18" swing x 40" centers
Anilam 4200 T cnc control
Quick change tool holder
10" 3 jaw chuck
|
|
Ad # 15254 | Combination (teach lathe) CNC / Manual |
1996 |
Romi |
EZ Path |
Good |
sold |
Photo /
More Info. |
16" swing x 40" centers: Bridgeport/Romi EZ path Lathe
manual or cnc control-conversational control
16" swing over bed
center dist:40"
3 jaw chuck
toolpost
auto lube
chip tray
they were both working when taken out from power!
movable safety shield
std: mfg specs below-please verify actual machines
wing Over Bed: 16.5"
Swing Over Cross Slide: 8"
Distance Between Centers: 40"
Height Of Centers: 8"
Hole Thru Spindle: 2"
Spindle Speeds (24): 37.5 - 3,000 RPM
Spindle Nose: A2 - 5
Bed Width: 12"
Bed Height: 13-5/32"
Rapid Traverse Rate X/Z Axis: 250"/Min.
Spindle Taper: 1°26'
Quill Bore Taper MT#: MT#4
Quill Diameter mm(in.): 2"
Quill Travel mm(in.): 6.3"
Horsepower: 8 H.P.
Voltage: 480V ~ 3 Phase
Dimensions (L x W x H): 90" x 56" x 87"
Weight: 4,000 Lbs.
2 available |
|
Ad # 8765 | Combination (teach lathe) CNC / Manual |
1996 |
Bridgeport |
EZ Path |
Good |
sold |
Photo /
More Info. |
8" chuck: Distance Between Center 40"
Swing Over Bed 16.5"
Trig Calculator
Tool Offsets 24 Offsets
Program Storage 80 MB Internal Hard Drive
External Input Built-in 3.5" Floppy Drive
Communication RS-232 Port
Bridgeport 2 Axis EZ Path Control
Dual Electronic Handwheel Controls
Central Lubrication, One Shot Manual Type
Complete Coolant System
Removable Chip Pan
Tailstock (manual)
Quick Change Tool Post With 6 Holders
Swing Over Cross Slide 8.6"
Cross-Slide (X Travel) 8.6"
Longitudinal (Z Travel) 40"
Spindle Nose A2-5 ASA
Spindle Bore/Taper 1.970"
Spindle Speed Range (manual) 37.5-3000 RPM
Quill Travel 6.3"
Quill Taper Hole MT-4
Spindle Motor 8 HP
Monitor 9" CRT, Grey Scale, VGA
Program Input Conversational Menu Format
Operational Modes Manual (MDI) Teachm Run
Turning Cycles Roughing, Facing,Turning
Threading, Grooving
Help Screens Math/Geometry Help
|
|
Ad # 14529 | Combination (teach lathe) CNC / Manual |
1997 |
Bridgeport |
EZ Path S |
Good |
sold |
Photo /
More Info. |
1997 Bridgeport EZ Path S Lathe: 1997 Bridgeport EZ Path CNC Lathe
Swing Over Bed = 16.96"
Distance Between Centers = 40
Swing Over Cross Slide = 8"
Cross Slide Travel = 8.6"
Spindle Nose = ASA A2-5
Spindle Bore = 2.08"
Bed Width = 12"
Spindle Speeds Variable = 25 to 4,000 RPM
Tailstock Quill Travel = 4.7"
Tailstock Quill Diameter =2.36"
Tailstock Taper = #4 MT
Floor Space Required = 68" X 110"
Approximate Weight = 4,000 lbs.
Bridgeport EZ Path CNC Control
Turn Parts Manually Or Automatically Teach 1st
Part, Run remaining parts automatically also
includes a airdex tailstock turret:manual
turret
rotation 24 Offsets
Coolant System With Removeable chip Pan
7.5 Horse Power Spindle Motor
Note:Original CRT and Keyboard stopped
working -added on CRT and Keyboard |
|
Ad # 5797 | Combination (teach lathe) CNC / Manual |
1997 |
Harrison |
Alpha 400 |
Excellent |
Sold |
Photo /
More Info. |
Harrison Alpha 400, 10" Chuck, 2" thru hole, 2500 RPM, Fanuc control, : Specifications:
Category: Lathe CNC Combination
Description: Lathe
Manufacturer: Harrison
Model: Alpha-400
Features: 600 Lathe series
2500 RPM Spindle
GE Fanuc Controller
Aloris Quick Change Toolpost
Drill Chuck
Coolant System
Condition: Excellent
|
|
Ad # 7706 | Combination (teach lathe) CNC / Manual |
1997 |
Trak |
TRL 1745-P |
Excellent |
Sold |
Photo /
More Info. |
17" x 45 CNC Teach Lathe with ProtoTrak LX 2 Control: Control: ProtoTrak LX 2-conversational programming-very easy to use
Swing: 17"over bed
Distance Between Centers: 45"
Tailstock
Spindle Power: 15 hp
Spindle Bore: 1-1/2"
Spindle Speed: 40 - 2,200 rpm
Chuck : 8" :3-Jaw - manualy operated
Steady Rest
Chip Guard |
|
Ad # 5837 | Combination (teach lathe) CNC / Manual |
1997 |
CLAUSING/METOSA |
Metosa EL1765CS |
Very Good |
SOLD |
Photo /
More Info. |
17.5" x 65" Clausing Gap Bed CNC Teach Lathe: Swing Over Ways 17-11/16"
Swing Over Carriage Wing 16-1/8"
Swing Over Cross Slide 10-1/8"
Swing in Gap 25-1/2"
Distance Between Centers 65"
Spindle Hole 2-1/32"
Spindle Motor 10 H.P., 460 Volt 3 Phase
Spindle Speeds 0 to 2300 RPM Infinitely Variable
Spindle Nose D1-6
Tailstock Taper MT4
Feed Rates 0 to 118 IPM
Rapid Rate 200 IPM
Equipped With Fagor 800 TGI CNC Control with Conversation & Teach Functions
8 Position Manual Turret
Collet Nose w/ Power Draw Tube
(20) Collets
Electric Hand Wheels
Constant Surface Speed Control
All Styles of Threading without Change Gears |
|
Ad # 10979 | Combination (teach lathe) CNC / Manual |
1998 |
Harrison |
Alpha 460 Plus |
Needs Work |
sold |
Photo /
More Info. |
22" swing x 72" centers: Harrison Alpha 460 plus teach lathe
1998
22 swing x 72" centers
control: GE Fanuc
spindle rpm: 20-2000
12" 3 jaw chuck
3-1/8" spindle bore
15HP main spindle motor
x drive pops fuses
spindle little noise...
RS232 port
electrical cabinet looks clean inside.
|
|
Ad # 3276 | Combination (teach lathe) CNC / Manual |
1998 |
Clausing |
METOSA EL-1565 |
Very Good |
sold |
Photo /
More Info. |
CLAUSING METOSA EL-1565 CNC LATHE: MAXIMUM SWING OVER BED 15.75"
SWING OVER CARRIAGE 14.56"
SWING OVER CROSS SLIDE 8.25"
DISTANCE BETWEEN CENTERS 65"
X AXIS TRAVEL 12"
Z AXIS TRAVEL 65"
RAPID TRAVERSE RATE X AXIS 393 IPM
RAPID TRAVERSE RATE Z AXIS 393 IPM
SPINDLE NOSE D1-6
SPINDLE BORE 2.03"
SPINDLE SPEEDS (3 RANGES) 0 - 2300 RPM
SPINDLE MOTOR 10 HP
TOOLING CAPACITY TOOL POST
TAILSTOCK QUILL TAPER MT #5
TAILSTOCK QUILL DIAMETER 2.31"
TAILSTOCK QUILL STROKE 6.25" |
|
Ad # 5214 | Combination (teach lathe) CNC / Manual |
1998? |
Milltronics |
ML15-E |
Very Good |
Sold |
Photo /
More Info. |
Milltronics Combination CNC/Manual Lathe 16" x 40": 16" swing over ways , 9" over crosslide x 40" centers
3 Speed gear box 20-3000 RPM
8" 3 jaw chuck, does not include collet closer shown
Quick change Aloris toolpost W/ 2 holders
Pull out chip tray
Control: Centurion 6 with conversational or g code programming
Floppy drive & RS232 port |
|
Ad # 13192 | Combination (teach lathe) CNC / Manual |
1998 |
VICTOR |
1650 ENC |
Good |
sold |
No Photo /
More Info. |
16" x 50" cnc/manual lathe: 16"Swing, x 50"cc, 9" over cross slide,
24"in Gap bed,
2.125 Spindle Bore, D1-6 Mount,
#5MT Tail Stock
Coolant,
conversational & G code programming
12-2500 RPM IVS
8"3 & 12" 4 jaw Chucks
QC toolpost included w/ 2 holders
have all books |
|
Ad # 14982 | Combination (teach lathe) CNC / Manual |
1999/97 |
chevalier |
FCL1840D |
Good |
sold |
Photo /
More Info. |
18" x 40": 1997 & 1999 Chevalier FCL 1840D combination
teach lathes for sale cnc/manual operation
dynopath/autocon controls
10" chuck 3 jaw
2.125 spindle bore
all books included
coolant
steady rest 8"
12" 4 jaw chuck
floppy & rs232 ports |
|
Ad # 11147 | Combination (teach lathe) CNC / Manual |
1999 |
Ecoca |
PC-3807 |
Very Good |
Sold |
Photo /
More Info. |
cnc/maual lathe combo: 1999 ECOCA PC-3807 CNC TOOL ROOM LATHE
Chuck Size 6"
Max Diameter Bar Capacity 1.75"
Max Swing Over Bed / Carriage 18.5" / 9.44"
Max Turning Diameter 9.44"
Distance Between Centers 29.5"
Bed Width 11.81"
Tools 4
Spindle Speed 20 - 4000 RPM
Spindle Bore 1.8"
Spindle Nose D1-5
Spindle Motor 10 HP
Rapid Traverse Rates (X & Z) 315 IPM
X-Axis Travel 9.4"
Z-Axis Travel 29.52"
Tailstock Taper MT#3
Machine Weight 2420 lbs.
FEATURES:
MITSUBISHI CNC CONTROL
CNC, Manual and Teach Modes
G-Code and Conversational Programming
Aloris Quick-Change Single Tool Post
6" Manual 3-Jaw Chuck
Tailstock
Electronic / Manual Handwheels
Full Enclosure
LOW HOURS, WELL MAINTAINED, FULLY OPERATIONAL |
|
Ad # 11316 | Combination (teach lathe) CNC / Manual |
1999/046 |
Milltronics |
ML17 |
Good |
sold |
Photo /
More Info. |
17 x 40: 1999 Milltronics ML17
control: centurior 6
17" swing over ways , 10" over cross slide
40" centers
10HP
3 jaw chuck
floppy drive & RS 232
Dorian Quadra toolpost post w/ 6 holders
spindle bore-2-1/4"
3 speed gear box
machine runs good used in small job shop daily
optional collet closer wheel system available add $1300.00
rigger required to load -approx: 1000.00 |
|
Ad # 7115 | Combination (teach lathe) CNC / Manual |
1999 |
Harrison |
Alpha Plus 400 |
Good |
Sold |
Photo /
More Info. |
16" x 50" Harrison Alpha 400 Plus Teach Lathe : Control: Harrison GE/Fanuc
Swing Over Bed: 15-3/4"
Distance Between Centers: 50"
Swing Over Cross Slide: 9-5/8"
Swing in Gap: 23"
Spindle Bore: 2-1/8" diam.
Spindle Nose: Camlock D1-6"
Spindle Power: 10 hp
Taper In Nose: # 4 MT
Spindle Speeds:
Low Range: 15 - 300 rpm
High Range: 110 - 2,500 rpm
Tailstock Travel: 5-3/4"
Tailstock Diameter: 2-1/2" (63 mm)
Tailstock Taper: # 5MT
Constant Power Range: 46 - 2,500 rpm (5.5kW)
Ball Screw Diameter - X Axis : 3/4" (20 mm)
Ball Screw Diameter - Z Axis: 1-1/4" (32 mm)
Z-Axis Thrust: 1416 lbs (6.3 KN)
Longitudinal Feedrates: 0.001 to 0.016 in/rev
Cross Feedrates: 0.001 to 0.016 in/rev
Feed Override: +/- 50%
Rapid Feedrates - Doors Closed: 240 ipm
Rapid Feedrates - Doors Open: 160 ipm
Electrical Supply: 21 kVA
Includes:
Dell PC (as shown) with Windows 2000 Proffessional
10" 3-Jaw Chuck
Aloris Quick Change Tool Post
8 tool holders
Work Light
|
|
Ad # 14995 | Combination (teach lathe) CNC / Manual |
2000 |
Romi/Bridgeport |
EZ Path SD |
Good |
sold |
Photo /
More Info. |
16" x 40": 2000 Bridgeport/Romi#EZ-Path#SD Lathe-16x40"
cnc/manual operation
control: DX32R
17" swing over bed
chuck:8" 3 jaw
center distance: 40"
Swing Over Bed: 16''
distancee Between Centers:40''
RPM: 4 - 4000
HP:10
Hole Thru Spindle: 2"
SPECIFICATIONS:std mfg specs below
SWING OVER BED.................. 16.96"
DISTANCE BETWEEN CENTERS......... 40"
SWING OVER CROSS SLIDE............ 8"
CROSS SLIDE TRAVEL ............... 8.6"
SPINDLE NOSE........... ASA A2-5"
SPINDLE BORE......... 2.08"
BED WIDTH ............................. 12"
SPINDLE SPEEDS VARIABLE .. 25 TO 4,000 RPM
TAILSTOCK QUILL TRAVEL....... 4.7"
TAILSTOCK QUILL DIAMETER....... 2.36"
TAILSTOCK TAPER.............. #4MT
FLOOR SPACE REQUIRED..... 68" X 110"
APPROXIMATE WEIGHT....... 4,000 LBS.
EQUIPPED WITH:
-BRIDGEPORT EZ PATH CNC CONTROL DX32R, 32 BIT PROCESSOR WITH
- TURN PARTS MANUALLY OR AUTOMATICALLY
- "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
- 24 OFFSETS, GRAPHIC TOOL LIBRARY, TOOL PATH VIEWED ON-SCREEN
- SPINDLE& AXES DRIVES
- THREADING, TURNING, DRILLING, GROOVING, FACING CYCLES & MORE
- DUAL ELECTRONIC HANDWHEELS
- 3.5" FLOPPY DISK DRIVE RS 232 PORT
- SPLASH GUARDING SINGLE SLIDING DOOR
- 3-JAW CHUCK
- TOOLPOST
- COOLANT SYSTEM WITH REMOVEABLE CHIP PAN
- 10.0 HORSE POWER SPINDLE MOTOR
- MANUALS
- Basic tooling package
note: includes loading onto flat bed truck
|
|
Ad # 14947 | Combination (teach lathe) CNC / Manual |
2000 |
Bridgeport/Romi |
EZ Path |
Good |
sold |
Photo /
More Info. |
17" swing: Bridgeport EZ Pathe-CNC/Manual Lathe
17" swing over bed ways,
More info to come! |
|
Ad # 13142 | Combination (teach lathe) CNC / Manual |
2000 |
Milltronics |
ML28 |
Fair |
sold |
Photo /
More Info. |
28 swing x 120centers: Milltronics ML 28 Teach type :cnc/manual Lathe
28" swing over bed, 19" over cross slide
120" center distance
16" chuck-3 jaw
QC toolpost
Hrs: 28002.3 hrs total on time
10-2000rpm max spindle speed, 3 speed gearbox
4.3" Spindle Bore
28" Swing-Over bed
D-1-8 Camlock,
Motor 20/15 HP
Conversational or G-Code Programming, CNC, Teach & Manual Modes, 16" Manual Chuck, Steady Rest (9" Dia. Capacity), Dorian Single Tool Post, Manual Tailstock, Manual/Electronic Handwheels, Full Chip Guard Enclosure, Three Gear Range Headstock
machine was recently taken out of service, shows normal wear but runs well |
|
Ad # 7965 | Combination (teach lathe) CNC / Manual |
2001 |
Milltronics |
ML20 E x 60 |
Very Good |
Sold |
Photo /
More Info. |
20" swing a 60" centers teach type lathe: Includes option Acc pkg # 2-color LCD monitor, coolant, High torque vector ... |
|
Ad # 6384 | Combination (teach lathe) CNC / Manual |
2001 |
PowerMaster |
KL-1640 |
Excellent |
Sold |
Photo /
More Info. |
16 x 40 teach lathe-cnc/manual: PowerMaster Baron-Max versatile CNC Plus Center Lathe, rugged heavily ribbe... |
|
Ad # 5562 | Combination (teach lathe) CNC / Manual |
2002 |
ECOCA |
PC-1840E |
Very Good |
Sold |
Photo /
More Info. |
10" Chuck, 18" Swing CNC Turning Center: Chuck Size: 10 "
Bar Capacity: 2.25 "
Turning Dia: 10 "
Swing: 18 "
Centers: 40 "
Tailstock |
|
Ad # 12158 | Combination (teach lathe) CNC / Manual |
2002 |
Ecoca |
PC 1840 |
Good |
sold |
Photo /
More Info. |
18" x 40": Ecoca PC 1840
2-2500 RPM
3" Spindle Bore
4 Jaw 12" Chuck
2 Steady Rests 6" and 4" Diameters |
|
Ad # 13961 | Combination (teach lathe) CNC / Manual |
2002 |
Fryer |
Easy turn # ET18 |
Good |
sold |
Photo /
More Info. |
18" swing over bed x 40" centers: Fryer: Easy Turn #ET18 cnc/manual combination lathe with 18 swing x 40"cent... |
|
Ad # 14703 | Combination (teach lathe) CNC / Manual |
2002 |
Fryer |
East Turn # ET18 |
Good |
sold |
Photo /
More Info. |
18" swing over bed x 40" centers : Fryer: Easy Turn #ET18 cnc/manual combination
lathe with 18"swing x 40"centers
Swing: 18" over bed ways,9.5" over cross
slide
Includes:10" 3 jaw chuck also 8" six jaw
chuck
2" spindle bore D1-6 camlock
2 speed auto shift feature
floppy drive & ethernet port
control: touch 2000 windows 95 conversational or G
Code programming Designed by toolmakers for toolmakers,
the
Fryer Easy Turn Series provides rugged construction and
high accuracy in a compact toolroom lathe
The Easy Turn is easier to use than a
conventional
lathe, yet offers the productivity of a CNC
Time consuming manual set-ups for threading,
tapers,chamfers, and contours are eliminated by the Easy
Turn's handle driven "Do One" cycles and electronic stops.
auto lube included
Spindle speeds:50 to 2500 rpm
rapid travers rates: (X,Z) 400IPM
manual tailstock 4MT
coolant system
includes: live center & drill chuck for
tailstock,
manuals |
|
Ad # 16021 | Combination (teach lathe) CNC / Manual |
2002 |
Fryer |
Easy Turn # ET18 |
Good |
sold |
Photo /
More Info. |
18" swing over bed x 40" centers : Fryer: Easy Turn #ET18 cnc/manual combination
lathe with 18"swing x 40"centers
Swing: 18" over bed ways,9.5" over cross
slide
Includes:10"-3 jaw chuck only
2" spindle bore D1-6 camlock
2 speed auto shift feature
floppy drive & ethernet port
control: touch 2000 windows 95 conversational or G
Code programming Designed by toolmakers for toolmakers,
the
Fryer Easy Turn Series provides rugged construction and
high accuracy in a compact toolroom lathe
The Easy Turn is easier to use than a
conventional
lathe, yet offers the productivity of a CNC
Time consuming manual set-ups for threading,
tapers,chamfers, and contours are eliminated by the Easy
Turn's handle driven "Do One" cycles and electronic stops.
auto lube included
Spindle speeds:50 to 2500 rpm
rapid travers rates: (X,Z) 400IPM
manual tailstock 4MT
coolant system
includes: tailstock, manuals,no toolpost,3 jaw chuck only |
|
Ad # 10735 | Combination (teach lathe) CNC / Manual |
2006 |
HAAS |
TL-1 |
Very Good |
sold |
Photo /
More Info. |
: Haas TL-1 CNC Toolroom Lathe
2006 Haas TL-1 CNC or Manual operated lathe Very low hours and used in a home shop and never for production work
Comes loaded with 3 jaw chuck, Dorian Quick change tool post
5 tool holders
tailstock
Haas coolant system
rigid tapping
floppy drive
Royale 5C Air collet closer with foot control ( cost over $2500 )
5C collet nose, 7.5hp, 2,000 rpm,
Lathe can run on single phase 240v power or three phase 230 v power |
|
Ad # 11107 | Combination (teach lathe) CNC / Manual |
2008 |
Atrump |
KL-1640 |
Good |
Sold |
Photo /
More Info. |
10" chuck 16x40: 2008 Atrump KL-1640 CNC Lathe 2-axis,
7.5hp Motor
10" 3-Jaw Chuck, D1-6 Spindle,
220v/3ph,
Centroid T400S Control
|
|
Ad # 10953 | Combination (teach lathe) CNC / Manual |
2009 |
Atrump |
KL-2160 |
Excellent |
Sold |
Photo /
More Info. |
Atrump: Combination Teach Lathe-21"swing x 60" -like new: Atrump KL 2160 CNC Teach Lathe -Like New
10 HP Spindle Motor
D1-8(3-3/8) spindle w/ 16" 3 jaw chuck
Max 2,200 rpm spindle speed
Auto shift 3 gear range
Hardened & Ground
Turcite-B coating guide way
Machine Made in Taiwan
•Centroid T400S control with 15” LCD
•10 HP Spindle Motor, D1-8, 3-3/8 through hole spindle
•Max 2,200 rpm spindle speed with Auto shift 3 gear range
•Hardened & Ground with turcite-B coating guide way
•C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
•FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
•100% Laser tested for positioning accuracy & repeatability
•MASSIVE ONE PIECE CASTING CONSTRUCTION FOR MAXIMUM CUTTING PERFORMANCE
•14” Wide bed ways design to provide maximum rigidity & stability
•Tool box & Tools
•Coolant System
•Central lubrication system
•Built-in Quartz work light
SPECIFICATION:please verify-std specs below
Model KL2160NC
Basic dimension
Height of Center 267 mm 10.53 inch
Swing over Bed 535 mm 21 inch
Swing over Cross Slide 310 mm 12 inch
Distance Between Centers 1,500 mm 60 in.
Bed
Width of Bedways 350 mm 13.78 inch
Spindle
Spindle nose mounting :STD: D1-8
Spindle bore STD: 85 mm 3-3/8 inch
Taper of spindle bore M.T.#7 (Sleeve M.T.#5)
Range of spindle speeds Automatic shift High - Middle - Low
2200~491 - 490~125 - 124~27 RPM
Longitudinal travel (Z axis)
2160 51.2 in.
Cross slide travel (X axis) (Ball screw 25㎜x 5㎜ C5) 295㎜ 11.6 inch
Rapid travel/Cutting feed rate 180 / 120 ipm
Tool
Max. size cutting tool 25 mm or 1 inch (4-way tool post)
Tailstock
Tailstock quill diameter 63 mm 2.5 inch
Tailstock quill Taper M.T.#5
Tailstock quill travel 180 mm 7 inch
Motor
Main spindle motor 10 HP. 7.4 kw
Machine Net weight 6,270 lbs. 2,850 kgs. / 6,930 lbs. 3150 kgs. / 7,700 lbs. 3500 kgs.
Crate Dimension (L x W x H) 126”x74”x77”
STANDARD ACCESSORIES:
Tools & box Full guarding Shop floor programming/Conversational
Leveling bolts & plate USB 2.0 15” color LCD
RS-232 Interface Auto lube system
Halogen work light
Operation manual
Coolant system
1 GB solid state hard drive
Additional Accessories information:
4 way electric tool post
Type of oil for Way oil / Gear oil / pneumatic oil Mobil Vectra #2 / Mobil 1 gear / Air tool oil
Coolant capacity 3.5 Gallons
Machine sold for over 60K new by netmachinery
|
|