Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123

Home > NetMachinery Equipment Listings > Manual Lathes
We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 67? Make - Gisholt Model - 2-L/13W-9137
Mouseover Thumbnails to Enlarge

Price: $3495.00reduced USD   
Category: Ram Type & Saddle Type Turret Lathes
Capacity: Heavy Duty Turret Lathe

Ad # 4325

Add/Remove from Checklist
Year: 67?
Make: Gisholt
Model: 2-L/13W-9137
Condition: Good
Electrical: 575/3

Machine Status:Still in production
Shipping Info:Rigging Fee Extra
Dimension: L x W x H

Machine Location:
City: On Request
State: North Carolina


$3495.00reduced USD

Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Swing: 24"
    Distance Between centers: 60"
    Spindle Bore: 4.25"
    4 way toolpost
    air gap and a chuck at 22” and 24” diameters.
    22” clears the ways and the 24” would hit the
    ways. It also shows the dimension from center
    the chuck to a level point across the ways.

    The total distance outside the ways is 17”
    was 15”). The operator side way is 4 ½”
    The opposite side way is 3” across. The ‘air’
    between the ways is 9 ½” (his was 7 ½”). The
    are 1 ¼” thick.

    The center of the chuck to level across the
    is 11”. The swing is debatable… 22” definitely
    clears the ways. A circle drawn at chuck
    point could be a little less than 24” before
    touching the ways considering the ‘air gap’ is
    also on center.


    575 3 phase… The drive motor, rapid traverse
    motor and coolant pump most likely can be
    for 230/460. There is a small multi-tap
    transformer inside the control cabinet. It is
    wired for 575 but has the connections for 230
    460 as well.


    I don’t know if it runs. The headstock and
    traverse oil site gauges show ‘middle’ of the
    sight glass bulls eye.

    Manual etc.

    I have a manual and what looks to be a
    electrical print.

    Other stuff:
    It has a ‘chuck’ switch and ‘inch’ switch.
    is used on our other Gisholts to maneuver the
    chuck so as to insert the chuck wrench.
    loading fee: $ 800.00

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


3500 offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions