Home | Contact Us | About Us | Email NetMachinery | Tel: 704-904-9123
NetMachinery is your online market place to buy and sell new and used machinery
Quality Service Since 1999
| Home > NetMachinery Equipment Listings |
Hot Deals
Your search results (if any) appear below in groups of 75 for each section.CNC Lathes & Turning Centers
|
|
 | ||
| Ad # 15720 | Turning Center 4 - 10 in. chuck | |
| Year = 2011? | Capacity = 16"dia max x 43" L | |
| Make = Kia | State = California | |
| Model = 28L | Condition = Fair | |
| Price = 6,295.00 reduced | ||
 | ||
| Ad # 15713 | Turning Center 4 - 10 in. chuck | |
| Year = 2000 | Capacity = 10" | |
| Make = Hitachi Seiki | State = Texas | |
| Model = HT-23R III | Condition = Good | |
| Price = 34,995 | ||
 | ||
| Ad # 15230 | Turning Center 11 in. & over chuck | |
| Year = 2005 | Capacity = 36" swing x 12ft bed | |
| Make = Sunfirm-SFM | State = Texas | |
| Model = CST4280-14A | Condition = Good | |
| Price = 49,995.00 | ||
 | ||
| Ad # 15185 | CNC Lathe w/sub Spindle or Live Tooling | |
| Year = 1988 | Capacity = 8" hyd chuck-live tooling | |
| Make = Mazak | State = North Carolina | |
| Model = QT-10ATC-U/MC | Condition = Good | |
| Price = 12,750 reduced | ||
 | ||
| Ad # 14979 | Turning Center 4 - 10 in. chuck | |
| Year = 2001 | Capacity = 8" chuck | |
| Make = Daewoo | State = California | |
| Model = Lynx 200LC | Condition = Good | |
| Price = 12,750 reduced | ||
 | ||
| Ad # 14801 | Turning Center 11 in. & over chuck | |
| Year = 1990 | Capacity = Dual Turret!! | |
| Make = Okuma | State = Virginia | |
| Model = LC20 4axis simulturn | Condition = Good | |
| Price = 12,250 reduced | ||
 | ||
| Ad # 14665 | Turning Center 11 in. & over chuck | |
| Year = 2012 | Capacity = max turning dia: 23.62" | |
| Make = Okuma | State = Colorado | |
| Model = Multus B200II | Condition = Excellent | |
| Price = 409,990 reduced | ||
 | ||
| Ad # 13487 | Turning Center 4 - 10 in. chuck | |
| Year = 1994 | Capacity = 1994 IKEGAI TCR 15 Lathe and Bar Feeder | |
| Make = IKEGAI | State = Ohio | |
| Model = TCR 155 | Condition = Excellent | |
| Price = 21,995.00 | ||
|
|
 | ||
| Ad # 15687 | Second Operation | |
| Year = ? | Capacity = 750, 1800 or 2000 rpm | |
| Make = Hardinge | State = California | |
| Model = Speed Lathe | Condition = Good | |
| Price = 1750.00 | ||
 | ||
| Ad # 15686 | Second Operation | |
| Year = 1966 | Capacity = Bar capacity 1/2" | |
| Make = Carl Hoffman | State = California | |
| Model = HA15 | Condition = Good | |
| Price = 795.00 | ||
 | ||
| Ad # 15600 | Heavy Duty Large Lathe 24in. & over swing | |
| Year = 199? | Capacity = 26" swing x 120" centers | |
| Make = Longem | State = North Carolina | |
| Model = LG26120C | Condition = Good | |
| Price = 6990.00 | ||
 | ||
| Ad # 15508 | Heavy Duty Large Lathe 24in. & over swing | |
| Year = 1942 | Capacity = 56" swing over bed x 276" between centers | |
| Make = Niles Tool Works | State = Alabama | |
| Model = A 12-3 | Condition = Good | |
| Price = 26,795.00 reduced | ||
 | ||
| Ad # 15507 | General Purpose Lathe 15in. to 23in. swing | |
| Year = 1970 | Capacity = 16" swing x 54" between centers | |
| Make = Monarch | State = Alabama | |
| Model = 612 | Condition = Good | |
| Price = 5795.00 | ||
 | ||
| Ad # 15399 | Vertical Turret Lathe (VTL) | |
| Year = 1950's | Capacity = 42" 3 jaw chuck | |
| Make = Bullard | State = Florida | |
| Model = 42" | Condition = Good | |
| Price = 9,950 reduced | ||
 | ||
| Ad # 10938 | Vertical Turret Lathe (VTL) | |
| Year = 1968 | Capacity = 84" table x 96" under rail | |
| Make = Gray | State = North Carolina | |
| Model = Series 60 | Condition = Good | |
| Price = 94,495.00 reduced | ||
|
|
 | ||
| Ad # 15690 | CNC & Retrofit Knee / Bed Mills w/o ATC | |
| Year = ? | Capacity = 11 x 50 table | |
| Make = Shizouka | State = California | |
| Model = mill master ANS | Condition = Good | |
| Price = 7450.00 | ||
 | ||
| Ad # 15575 | Vertical Machining Centers (VMC) | |
| Year = 1998 | Capacity = travel:50" x 20" x 20" | |
| Make = Fadal | State = North Carolina | |
| Model = #917-1/5020AHT | Condition = Good | |
| Price = 13,995 | ||
 | ||
| Ad # 15422 | CNC & Retrofit Knee / Bed Mills w/o ATC | |
| Year = 200? | Capacity = Table 58" x 10" | |
| Make = CWT | State = Florida | |
| Model = Pro 1058-M | Condition = Good | |
| Price = 11,495 reduced | ||
 | ||
| Ad # 15366 | Vertical Machining Centers (VMC) | |
| Year = 1993 | Capacity = Travels are x:70” y:60” z:24” | |
| Make = Milltronics | State = North Carolina | |
| Model = VMD 30-D | Condition = Good | |
| Price = 14,995 reduced! | ||
 | ||
| Ad # 15267 | Vertical Machining Centers (VMC) | |
| Year = 1996 | Capacity = 60" x 30" x 28" | |
| Make = FADAL | State = North Carolina | |
| Model = VMC 6030HT/# 907 | Condition = Good | |
| Price = 13,995.00 reduced | ||
 | ||
| Ad # 15062 | Horizontal Machining Centers (HMC) | |
| Year = 2007 | Capacity = — | |
| Make = Fastems | State = — | |
| Model = Anlage | Condition = Good | |
| Price = 1,590,000 reduced | ||
 | ||
| Ad # 14664 | Vertical Machining Centers (VMC) | |
| Year = 1995 | Capacity = 40" x 20" | |
| Make = Fadal | State = Colorado | |
| Model = 4020 | Condition = Good | |
| Price = 9,995 reduced | ||
 | ||
| Ad # 14663 | Vertical Machining Centers (VMC) | |
| Year = 1995 | Capacity = 40" x 20" | |
| Make = Fadal | State = Colorado | |
| Model = 906-1/4020 | Condition = Good | |
| Price = 9,995 reduced | ||
|
|
 | ||
| Ad # 15689 | Hydraulic & Collet Chuckers | |
| Year = ? | Capacity = 6" power chuck | |
| Make = Hardinge | State = California | |
| Model = CHNC1 | Condition = Needs Work | |
| Price = 3495.00 | ||
 | ||
| Ad # 15695 | Hydraulic & Collet Chuckers | |
| Year = ? | Capacity = — | |
| Make = Hardinge | State = California | |
| Model = CHNC | Condition = Good | |
| Price = 7790.00 | ||
 | ||
| Ad # 15679 | Automatic Bar Machines | |
| Year = — | Capacity = 2-5/8" | |
| Make = Acme | State = North Carolina | |
| Model = RB-6 / 2-5/8 | Condition = Good | |
| Price = 4450.00 | ||
 | ||
| Ad # 15684 | Automatic Bar Machines | |
| Year = 1940-50s | Capacity = 9/16" | |
| Make = Acme | State = North Carolina | |
| Model = RA6 | Condition = Good | |
| Price = sold | ||
 | ||
| Ad # 15680 | Automatic Bar Machines | |
| Year = — | Capacity = 1-5/8" | |
| Make = Acme | State = North Carolina | |
| Model = RB-6 / 1-5/8" | Condition = Good | |
| Price = sold | ||
|
|
 | ||
| Ad # 15391 | Horizontal Drilling Machines | |
| Year = 2005 | Capacity = beam line:23" x 37- 1/8 | |
| Make = OCEAN AVENGER | State = Colorado | |
| Model = 1000/1B | Condition = Good | |
| Price = 69,995.00 offers | ||
|
|
 | ||
| Ad # 14920 | Cold Saws & Power Hack Saws | |
| Year = 200? | Capacity = Auto feed 14" ferrous cutting | |
| Make = Pedrazzoli | State = Nevada | |
| Model = Super Brown 350AP | Condition = Excellent | |
| Price = 14995.00 | ||
 | ||
| Ad # 14556 | Fully Automatic Horizontal Band Saw | |
| Year = 1989 | Capacity = 16.5" rounds or 16.5" x 16.5 rec | |
| Make = Kasto | State = Florida | |
| Model = HBA420AU | Condition = Good | |
| Price = 7,995.00 reduced | ||
 | ||
| Ad # 13785 | Cold Saws & Power Hack Saws | |
| Year = 1992 | Capacity = 10" Blade | |
| Make = Scotchman | State = Florida | |
| Model = Bewo CPO 250 | Condition = Good | |
| Price = 2195.00 | ||
|
|
 | ||
| Ad # 15691 | Surface Grinders | |
| Year = ? | Capacity = 8" wheel capacity | |
| Make = Harig | State = California | |
| Model = 612 | Condition = Good | |
| Price = 2795.00 | ||
 | ||
| Ad # 15692 | Tool & Cutter Grinders | |
| Year = 1973? | Capacity = — | |
| Make = Alexander | State = California | |
| Model = 2CG | Condition = Good | |
| Price = 1495.00 | ||
 | ||
| Ad # 15683 | Tool & Cutter Grinders | |
| Year = 2008 | Capacity = 3/32″ to 2″ | |
| Make = Rush Machinery | State = North Carolina | |
| Model = 250A | Condition = Good | |
| Price = 2195.00reduced | ||
 | ||
| Ad # 14770 | 3 Axis Fully Automatic Surface Grinder | |
| Year = ? | Capacity = 6 x 18"-fully auto w/ downfeed | |
| Make = Okamoto | State = North Carolina | |
| Model = ACC 6 x 18DX | Condition = Good | |
| Price = 8795.00 | ||
 | ||
| Ad # 14596 | Cylindrical Grinders (O.D. & I.D.) | |
| Year = 2012 | Capacity = 15" swing x 60"? nc control | |
| Make = Supertec | State = North Carolina | |
| Model = G38P-150-NC | Condition = Good | |
| Price = 15,995.00 reduced | ||
 | ||
| Ad # 14268 | Cylindrical Grinders (O.D. & I.D.) | |
| Year = 1965 | Capacity = OD only :grinder 18" x 48" | |
| Make = Cincinnati | State = North Carolina | |
| Model = DE | Condition = Good | |
| Price = 17,750 | ||
|
|
 | ||
| Ad # 15012 | Broaching Machines, Vertical & Horizontal | |
| Year = ? | Capacity = 6" # B vertical shaper | |
| Make = Pratt & Whitney | State = North Carolina | |
| Model = 6 Inch model-B/M-1506 | Condition = Good | |
| Price = 3495.00 | ||
|
|
 | ||
| Ad # 15676 | RAM / Conventional EDM Machines | |
| Year = 2015 | Capacity = 17.7" x 13.8" x 13.8" | |
| Make = Makino | State = North Carolina | |
| Model = EDAF3 | Condition = Excellent | |
| Price = 154,995 | ||
|
|
 | ||
| Ad # 15493 | Power Squaring Shear (Hydraulic) | |
| Year = 1987 | Capacity = 10ft x 1/4" | |
| Make = LVD | State = South Carolina | |
| Model = JS 25/10 | Condition = Good | |
| Price = 12,750.00 reduced! | ||
 | ||
| Ad # 15487 | Power Squaring Shear (Mechanical) | |
| Year = ? | Capacity = 6 Ft. x 14 Gauge | |
| Make = Wysong | State = Florida | |
| Model = 1472 | Condition = Good | |
| Price = 3500 | ||
 | ||
| Ad # 15005 | Power Squaring Shear (Hydraulic) | |
| Year = 1980's | Capacity = 1/2" mild steel x 12ft | |
| Make = Cincinnati | State = West Virginia | |
| Model = Series 5000 x 12 | Condition = Good | |
| Price = 19,995 reduced | ||
 | ||
| Ad # 10768 | Power Squaring Shear (Mechanical) | |
| Year = 1986 | Capacity = 12' x 3/8" | |
| Make = Bariola | State = Minnesota | |
| Model = CB29LS | Condition = Good | |
| Price = 26,995 reduced! | ||
|
|
 | ||
| Ad # 15717 | Benders & Swagers: Pipe and Tube | |
| Year = ? | Capacity = 75mm or 3" | |
| Make = Pines | State = North Carolina | |
| Model = #2 | Condition = Excellent | |
| Price = 69,795.00 | ||
 | ||
| Ad # 15643 | Shears: Sheet Metal | |
| Year = ? | Capacity = 80" x 16ga | |
| Make = wysong | State = North Carolina | |
| Model = A-72 | Condition = Good | |
| Price = 4450.00 | ||
 | ||
| Ad # 15642 | Slip Rolls: Manual & Mechanicaly Operated | |
| Year = ? | Capacity = 110" bend length x 18-20ga | |
| Make = custom | State = North Carolina | |
| Model = 9ft x 18ga | Condition = Good | |
| Price = 3995.00 | ||
 | ||
| Ad # 15636 | Brakes Press: Hydraulic | |
| Year = 1969 | Capacity = 400 ton 14' between frame | |
| Make = Pacific | State = Virginia | |
| Model = K400-17 | Condition = Good | |
| Price = 24,950.00 | ||
 | ||
| Ad # 15577 | Brakes Press: Hydraulic | |
| Year = 2012 | Capacity = 50 ton x 8ft. | |
| Make = Holem | State = Florida | |
| Model = WC67Y 50/2500 | Condition = Needs Work | |
| Price = 9995.00reduced | ||
 | ||
| Ad # 15503 | Hole Punches: Single,Turret and CNC | |
| Year = 1991 | Capacity = 22 Ton, 49" x 49" sheets | |
| Make = Wiedemann | State = Florida | |
| Model = C 2500 | Condition = Good | |
| Price = 15,995 | ||
 | ||
| Ad # 15492 | Brakes Press: Hydraulic | |
| Year = 2006 | Capacity = 176 ton x 120"/3meter/10ft bed | |
| Make = Durma | State = South Carolina | |
| Model = E-30160 | Condition = Good | |
| Price = 34,495 reduced! | ||
 | ||
| Ad # 15472 | Brakes Press: Hydraulic | |
| Year = 2008 | Capacity = CNC 88 tons x 10ft. | |
| Make = Acra Bend | State = Florida | |
| Model = US 8810 | Condition = Excellent | |
| Price = 22,995 reduced | ||
 | ||
| Ad # 15381 | Shears: Sheet Metal | |
| Year = ? | Capacity = 3/8" mild steel | |
| Make = Niagara | State = Florida | |
| Model = 510 RC 3/8 | Condition = Good | |
| Price = 6,495.00 reduced | ||
 | ||
| Ad # 15380 | Plate & Bending Rolls: Initial Pinch/Plate | |
| Year = 1942 | Capacity = 1/2" x 8ft | |
| Make = Bertsch | State = Florida | |
| Model = #9 | Condition = Good | |
| Price = 14,995reduced | ||
 | ||
| Ad # 15203 | Shears: Sheet Metal | |
| Year = ? | Capacity = 18" blade | |
| Make = Hero | State = South Carolina | |
| Model = DS1010 | Condition = Good | |
| Price = 3795.00 | ||
 | ||
| Ad # 15089 | Roll Formers: Angle/Profile Bending Rolls | |
| Year = 1948 | Capacity = 4" x 4" x 3/8" | |
| Make = Buffalo | State = Florida | |
| Model = #2 | Condition = Good | |
| Price = 19,995.00reduced | ||
 | ||
| Ad # 14004 | Benders & Swagers: Pipe and Tube | |
| Year = — | Capacity = 1 1/4" mild round steel. 2" 16ga. tubing. | |
| Make = Richards | State = Florida | |
| Model = # 24? | Condition = Fair | |
| Price = 3495.00 | ||
 | ||
| Ad # 13712 | Hole Punches: Single,Turret and CNC | |
| Year = 1986 | Capacity = 30 Ton with 32 stations | |
| Make = Wiedemann | State = Florida | |
| Model = W3050 | Condition = Excellent | |
| Price = 49,995.00 reduced | ||
 | ||
| Ad # 10935 | Joining: Riveters, Crimping, Beading and Flanging | |
| Year = 80's ? | Capacity = Circle shear & Knuckle flanger | |
| Make = Whiting-Quickwork | State = North Carolina | |
| Model = 40A | Condition = Good | |
| Price = 12995 offer | ||
 | ||
| Ad # 10936 | Joining: Riveters, Crimping, Beading and Flanging | |
| Year = 80's ? | Capacity = Circle shear & Knuckle machine | |
| Make = Whiting-Quickwork | State = North Carolina | |
| Model = Quickwork-34A shear | Condition = Good | |
| Price = 12995 offer | ||
 | ||
| Ad # 8576 | Misc. Sheetmetal Equip. | |
| Year = 1990 | Capacity = 5ft. wide(60") coils x 16ga | |
| Make = Iowa precision | State = North Carolina | |
| Model = Eslrrcc6016 | Condition = Very Good | |
| Price = 25,990 | ||
 | ||
| Ad # 15390 | Joining: Riveters, Crimping, Beading and Flanging | |
| Year = 2006 | Capacity = 20 Gauge | |
| Make = Enco | State = Florida | |
| Model = 330399 | Condition = Good | |
| Price = Sold | ||
|
|
 | ||
| Ad # 15204 | Misc. Welding Equip. / Acc | |
| Year = 1996 | Capacity = 2000watts | |
| Make = Dukane | State = South Carolina | |
| Model = 220 | Condition = Good | |
| Price = 6,995.00 reduced | ||
 | ||
| Ad # 13942 | Misc. Welding Equip. / Acc | |
| Year = 2005 | Capacity = stainless steel and aluminum plate from 1/4” to 1 1/2” | |
| Make = Gullco | State = Florida | |
| Model = GBM -18 | Condition = Good | |
| Price = 5,750.00 reduced | ||
 | ||
| Ad # 11247 | Welding Positioners | |
| Year = — | Capacity = 18" dia | |
| Make = Panjiris | State = North Carolina | |
| Model = 2-5MVRHT | Condition = Good | |
| Price = 2995.00 | ||
 | ||
| Ad # 11246 | Welding Positioners | |
| Year = — | Capacity = 18" Dia | |
| Make = Pandjiris | State = North Carolina | |
| Model = 2-5MVRHT | Condition = Good | |
| Price = 1795.00 reduced | ||
|
|
 | ||
| Ad # 15693 | OBI Presses | |
| Year = ? | Capacity = 9 x 11 platten size | |
| Make = Benchmaster | State = California | |
| Model = R01 | Condition = Good | |
| Price = 2595.00 | ||
 | ||
| Ad # 15688 | Miscellaneous Presses | |
| Year = ? | Capacity = — | |
| Make = VILH Pederson | State = California | |
| Model = 282AM | Condition = Good | |
| Price = 1995.00 | ||
 | ||
| Ad # 15202 | Manual Arbor Press | |
| Year = ? | Capacity = 15ton | |
| Make = Famco | State = South Carolina | |
| Model = 6CR | Condition = Good | |
| Price = 5995.00 | ||
|
|
 | ||
| Ad # 15718 | Water Jet | |
| Year = 2006 | Capacity = 4 x 4 table | |
| Make = Calypso | State = Florida | |
| Model = Hammerhead | Condition = Good | |
| Price = 57995.00 reduced | ||
 | ||
| Ad # 15388 | Plasma | |
| Year = 2006 | Capacity = 5' x 10' Table 1/2" mild steel | |
| Make = Linatrol | State = Florida | |
| Model = Picopath | Condition = Good | |
| Price = 7,495 reduced | ||
|
|
 | ||
| Ad # 15696 | Ultrasonic Welders for Plastic | |
| Year = 1963? | Capacity = RF welder | |
| Make = Faratron-W & G | State = California | |
| Model = 5FPS-FF-2 | Condition = Good | |
| Price = 9995.00 offer | ||
|
|
 | ||
| Ad # 15593 | Misc. Finishing Equip. | |
| Year = 2012 | Capacity = 37" wide belt | |
| Make = Timesaver | State = Florida | |
| Model = Lynx 37 MWT DBB-60 | Condition = Excellent | |
| Price = 59,995 | ||
 | ||
| Ad # 15482 | Misc. Finishing Equip. | |
| Year = 2004? | Capacity = 37" wide belt | |
| Make = Ramco | State = Florida | |
| Model = DW 37R | Condition = Good | |
| Price = 3795.00 | ||
 | ||
| Ad # 15355 | Vibratory Equipment | |
| Year = 2007 | Capacity = 15.7 cuft:24" x 60" tub | |
| Make = Finishing Assoc | State = North Carolina | |
| Model = TC2460 | Condition = Fair | |
| Price = 3290.00 reduced | ||
|
|
 | ||
| Ad # 15403 | Saws | |
| Year = 2005 | Capacity = Non-Ferrous-Max. Piece Thickness 5" Max. piece Width10" | |
| Make = Omga | State = Florida | |
| Model = T 2005 OPT 6000 | Condition = Good | |
| Price = 24,995 | ||
 | ||
| Ad # 15401 | Routers | |
| Year = 2002 | Capacity = X: 2500.000 mm (98.400 in)Y: 700.000 mm (27.600 in)Z: 30.000 mm (1.200 | |
| Make = Weeke | State = Florida | |
| Model = BHT 320 2/2 | Condition = Excellent | |
| Price = 52,995.00 | ||
|
|
 | ||
| Ad # 15694 | Textile Machinery | |
| Year = 1986 | Capacity = 7" x 10 1/2" platten size | |
| Make = Printex | State = California | |
| Model = 0-1 | Condition = Good | |
| Price = 950.00 | ||
Turn Your Surplus Machinery to Cash
NetMachinery will only use your e-mail to send occasional emails with new listings or other important information related to Machinery or Manufacturing.
Shop & Support Equipment
Fabrication Equipment
Chip Making Equipment
- CNC Lathes & Turning Centers
- Manual Lathes
- CNC Mills & Machining Centers
- Manual Mills - Millers
- Automatic Screw Machines
- Drill Presses and Tapping Machines
- Saws and Cutoff Machinery
- Grinders - Grinding Machinery
- Keyseaters, Broaching & Shapers
- EDM Machines
- Honing & Lapping Machinery
- Gear Making Machinery
- Miscellaneous metalworking
|
 |
